A special cloth for keeping LiF(Mg,Cu,P)TL dosimetry elements is worn by examinees. The exposures of 128 examinees .received upper G.I.T (gastro-intestinal tram) X-ray examination are measured. The reference point of ...A special cloth for keeping LiF(Mg,Cu,P)TL dosimetry elements is worn by examinees. The exposures of 128 examinees .received upper G.I.T (gastro-intestinal tram) X-ray examination are measured. The reference point of the maximum body surface exposure given is at the middle of stomach. The average of this point is (4.97±1.94) × 10-4C.kg-1 person-1 examination-1 and (1.33±0.28)×10-4C.kg-1.min-1.展开更多
A high-speed X-ray nondestructive detector is designed in this paper. The principle of X-ray nondestructive detection is analyzed, and a general system scheme of the high-speed X-ray nondestructive detector is propose...A high-speed X-ray nondestructive detector is designed in this paper. The principle of X-ray nondestructive detection is analyzed, and a general system scheme of the high-speed X-ray nondestructive detector is proposed. The Virtex-4 series Fxl2 FPGA chip is used to design its hardware circuit, the PowerPC405 embedded system is developed, the high-speed image processing algorithm is applied to compile its processing software, and TCP/IP protocol is employed to compile the correspondence software, to realize high-speed X-ray signal gathering, processing and transmission. The experimental result indicated that the detector can be applied to the long-distance and on-line nondestructive detection of product line with Steel Wire Ropes in correlative industry field, such as mines, ports and wharfs. The running rate of the conveyer belt could achieve 6m/s when the survey width of the detector is 1.6 m.展开更多
文摘A special cloth for keeping LiF(Mg,Cu,P)TL dosimetry elements is worn by examinees. The exposures of 128 examinees .received upper G.I.T (gastro-intestinal tram) X-ray examination are measured. The reference point of the maximum body surface exposure given is at the middle of stomach. The average of this point is (4.97±1.94) × 10-4C.kg-1 person-1 examination-1 and (1.33±0.28)×10-4C.kg-1.min-1.
基金Priority Project of Tianjin Science Technical Commission(08ZCKFGX02400)Science and Technology Development Foundation of Tianjin Colleges and Universities(2006ZD38)
文摘A high-speed X-ray nondestructive detector is designed in this paper. The principle of X-ray nondestructive detection is analyzed, and a general system scheme of the high-speed X-ray nondestructive detector is proposed. The Virtex-4 series Fxl2 FPGA chip is used to design its hardware circuit, the PowerPC405 embedded system is developed, the high-speed image processing algorithm is applied to compile its processing software, and TCP/IP protocol is employed to compile the correspondence software, to realize high-speed X-ray signal gathering, processing and transmission. The experimental result indicated that the detector can be applied to the long-distance and on-line nondestructive detection of product line with Steel Wire Ropes in correlative industry field, such as mines, ports and wharfs. The running rate of the conveyer belt could achieve 6m/s when the survey width of the detector is 1.6 m.
