The development of an AIGaN/GaN HEMT power MMIC on SI-SiC designed in microstrip technology is pres- ented. A recessed-gate and a field-plate are used in the device processing to improve the performance of the AIGaN/G...The development of an AIGaN/GaN HEMT power MMIC on SI-SiC designed in microstrip technology is pres- ented. A recessed-gate and a field-plate are used in the device processing to improve the performance of the AIGaN/GaN HEMTs. S-parameter measurements show that the frequency performance of the AIGaN/GaN HEMTs depends significantly on the operating voltage. Higher operating voltage is a key to higher power gain for the AIGaN/GaN HEMTs. The developed 2-stage power MMIC delivers an output power of more than 10W with over 12dB power gain across the band of 9-11GHz at a drain bias of 30V. Peak output power inside the band reaches 14.7W with a power gain of 13.7dB and a PAE of 23%. The MMIC chip size is only 2.0mm × 1. 1mm. This work shows superiority over previously reported X-band AIGaN/GaN HEMT power MMICs in output power per millimeter gate width and output power per unit chip size.展开更多
The X-ray pulsar-based navigation is a novel technology for the satellite autonomous navigation. The position and the velocity of the satellite are deterimined by using the pulse phases detected at the satellite and p...The X-ray pulsar-based navigation is a novel technology for the satellite autonomous navigation. The position and the velocity of the satellite are deterimined by using the pulse phases detected at the satellite and predicted by the pulse timing models. With the detected pulse phase, the satellite position with respect to the Earth center can be calculated along the line-of-sight to the pulsar. Using three pulsars, the satellite position in the in- ertial frame can be resolved. The extended Kalman filter （EKF） algorithm is designed to incorporate the range measurements with the satellite dynamics. Simulation verification shows that the proposed algorithm can accu- rately determine the satellite orbit, with the position error less than 100 m. Furthermore, the factors influencing the navigation performance are also discussed.展开更多
The frequency–space（f–x） empirical mode decomposition（EMD） denoising method has two limitations when applied to nonstationary seismic data. First, subtracting the first intrinsic mode function（IMF） results in ...The frequency–space（f–x） empirical mode decomposition（EMD） denoising method has two limitations when applied to nonstationary seismic data. First, subtracting the first intrinsic mode function（IMF） results in signal damage and limited denoising. Second, decomposing the real and imaginary parts of complex data may lead to inconsistent decomposition numbers. Thus, we propose a new method named f–x spatial projection-based complex empirical mode decomposition（CEMD） prediction filtering. The proposed approach directly decomposes complex seismic data into a series of complex IMFs（CIMFs） using the spatial projection-based CEMD algorithm and then applies f–x predictive filtering to the stationary CIMFs to improve the signal-to-noise ratio. Synthetic and real data examples were used to demonstrate the performance of the new method in random noise attenuation and seismic signal preservation.展开更多
One of the most important parameters for oceanic internal waves (IWs) is their amplitude. We have developed a method to retrieve the IW amplitude from nautical X-Band radar images based on the KdV equation for continu...One of the most important parameters for oceanic internal waves (IWs) is their amplitude. We have developed a method to retrieve the IW amplitude from nautical X-Band radar images based on the KdV equation for continuous stratified finite depth system. We have also tested the method of measuring the amplitude of IWs from X-Band radar backscatter image sequences acquired on June 2009 in the northeastern South China Sea. The method was applied in several radar images. Experiments show that the retrieval amplitudes are consistent with the in-situ observational amplitudes of IWs by using the towed thermistor chain and conductivity-temperature-depth (CTD) profile. The uncertainty of the method is also discussed.展开更多
A new ocean wave and sea surface current monitoring system with horizontally-(HH) and vertically-(VV) polarized X-band radar was developed.Two experiments into the use of the radar system were carried out at two sites...A new ocean wave and sea surface current monitoring system with horizontally-(HH) and vertically-(VV) polarized X-band radar was developed.Two experiments into the use of the radar system were carried out at two sites,respectively,for calibration process in Zhangzi Island of the Yellow Sea,and for validation in the Yellow Sea and South China Sea.Ocean wave parameters and sea surface current velocities were retrieved from the dual polarized radar image sequences based on an inverse method.The results obtained from dual-polarized radar data sets acquired in Zhangzi Island are compared with those from an ocean directional buoy.The results show that ocean wave parameters and sea surface current velocities retrieved from radar image sets are in a good agreement with those observed by the buoy.In particular,it has been found that the vertically-polarized radar is better than the horizontally-polarized radar in retrieving ocean wave parameters,especially in detecting the significant wave height below 1.0 m.展开更多
Shipboard X-band radar images acquired on 24 June 2009 are used to study nonlinear internal wave characteristics in the northeastern South China Sea.The studied images show three nonlinear internal waves in a packet.A...Shipboard X-band radar images acquired on 24 June 2009 are used to study nonlinear internal wave characteristics in the northeastern South China Sea.The studied images show three nonlinear internal waves in a packet.A method based on the Radon Transform technique is introduced to calculate internal wave parameters such as the direction of propagation and internal wave velocity from backscatter images.Assuming that the ocean is a two-layer finite depth system,we can derive the mixed-layer depth by applying the internal wave velocity to the mixed-layer depth formula.Results show reasonably good agreement with in-situ thermistor chain and conductivity-temperature-depth data sets.展开更多
A three-stage MMIC power amplifier operating from 6to 18GHz is fabricated using 0.25μm A1GaAs/InGaAs/GaAs pseudomorphic high electron mobility transistor（PHEMT）.The amplifier isfully monolithic,with all matching,bi...A three-stage MMIC power amplifier operating from 6to 18GHz is fabricated using 0.25μm A1GaAs/InGaAs/GaAs pseudomorphic high electron mobility transistor（PHEMT）.The amplifier isfully monolithic,with all matching,biasing,and DC block circuitry included on the chip.Thepower amplifier has an average power gain of 19dB over 6～18GHz.At operation frequenciesfrom 6 to 18GHz,the output power is above 33.3dBm,and the maximum output power of the MMICis 34.7dBm at 10Ghz.The input return loss is less than-10db and the out-put return is lessthan-6dB over operating frequency.This power amplifier has,to our knowledge,the best powergain flatness reported at C-X-Ku-band applications.展开更多
The correlation analysis of sea clutter data in a complex domain is conducted in this study. Specific to X-band sea clutter, the statistical characteristics of the complex correlation, particularly the phase character...The correlation analysis of sea clutter data in a complex domain is conducted in this study. Specific to X-band sea clutter, the statistical characteristics of the complex correlation, particularly the phase characteristics which are closely related to the phase difference of the sea clutter and the Doppler properties, are analyzed in detail based on the experimental data, recorded by the Mc Master University IPIX radar in 1993. That the phase term of the complex correlation presents linear change means that there exists the linearity of phase differences between different time intervals in the X-band sea clutter. This investigation explores the regularities about the effect of wind on the complex correlation with similar patterns for different polarization modes. The regularities indicate that the wind direction can be inferred from the distribution pattern of the complex correlation. Moreover, a model describing the relationships between the statistics of the complex correlation and wind parameters is proposed. The application for target detection based on the differences of characteristics of complex correlations between the sea clutter and the target are also investigated and the proposed features have been confirmed. The principle of the method is fundamental for broader future applications.展开更多
When imaging ocean surface waves by X-band marine radar, the radar backscatter from the sea surface is modulated by the long surface gravity waves. The modulation transfer function （MTF） comprises tilt, hydrodynamic...When imaging ocean surface waves by X-band marine radar, the radar backscatter from the sea surface is modulated by the long surface gravity waves. The modulation transfer function （MTF） comprises tilt, hydrodynamic, and shadowing modulations. A conventional linear MTF was derived using HH-polarized radar observations under conditions of deep water. In this study, we propose a new quadratic polynomial MTF based on W-polarized radar measurements taken from heterogeneous nearshore wave fields. This new MTF is obtained using a radar-observed image spectrum and in situ buoy-measured wave frequency spectrum. We validate the MTF by comparing peak and mean wave periods retrieved from X-band marine radar image sequences with those measured by the buoy. It is shown that the retrieval accuracies of peak and mean wave periods of the new MTF are better than the conventional MTF. The results also show that the bias and root mean square errors of the peak and mean wave periods of the new MTF are 0.05 and 0.88 s, and 0.32 and 0.53 s, respectively, while those of the conventional MTF are 0.61 and 0.98 s, and 1.39 and 1.48 s, respectively. Moreover, it is also shown that the retrieval results are insensitive to the coefficients in the proposed MTF.展开更多
Objective To observe the imaging findings of congenital megaureter in order to enhance the understanding of this disease. Methods Image data of 5 patients with congenital megaureter and 2 misdiagnosed patients were a...Objective To observe the imaging findings of congenital megaureter in order to enhance the understanding of this disease. Methods Image data of 5 patients with congenital megaureter and 2 misdiagnosed patients were analyzed, and image findings of congenital megaureter were summarized. Elscint Prestig 2.0T superconductive magnetic resonance urography （MRLI） with conventional sequence （spin-echo, T 1W1560 ms/16 ms; fast spin-echo, T2WI 9600 ms/96 ms） was performed. Raw data were acquired with fast spin-echo sequence from heavy T2-weighted image （9600 ms/120 ms）. Post-processing method of MRH was the maximum in- tensity projection with three-dimensional reconstruction in the workstation. Intravenous pyelography （IVP） was conducted, in which X-ray films were taken 7 minutes, 15 minutes, and 30 minutes after injecting contrast agent, except that in 2 patients the films were taken delayed at 60 and 90 minutes. X-ray retrograde pyelography was performed on 2 patients, successful in one but failed in the other. Results The dilated ureter showed hypointensity on T1-weighted images and hyperintensity on T2-weighted images in conventional MRI. The mass wall was intact, uniform in thickness, and showing hy- pointensity on Tl-weighted and T2-weighted images. The MRH images showed a retroperitoneal mass appearing as an elongated tubular cystic structure spreading from kidney to bladder. MRLI also revealed dilated calices and renal pelvis, pelviureteric obstruction, and renal duplication. The main signs of congenital megaureter in X-urography was significant dilatation of ureter, or normal renal pelvis with ureter dilatation, hydronephrosis, deformity, and displacement. Conclusions MRH with X-urography could visualize the characteristics of congenital megaureter, including the dilation of renal pelvis and ureter, calculi, urinary tract duplication, and stenosis location. The two techniques can complement each other in disease diagnosis and provide more detailed information for preoperative treatment.展开更多
文摘The development of an AIGaN/GaN HEMT power MMIC on SI-SiC designed in microstrip technology is pres- ented. A recessed-gate and a field-plate are used in the device processing to improve the performance of the AIGaN/GaN HEMTs. S-parameter measurements show that the frequency performance of the AIGaN/GaN HEMTs depends significantly on the operating voltage. Higher operating voltage is a key to higher power gain for the AIGaN/GaN HEMTs. The developed 2-stage power MMIC delivers an output power of more than 10W with over 12dB power gain across the band of 9-11GHz at a drain bias of 30V. Peak output power inside the band reaches 14.7W with a power gain of 13.7dB and a PAE of 23%. The MMIC chip size is only 2.0mm × 1. 1mm. This work shows superiority over previously reported X-band AIGaN/GaN HEMT power MMICs in output power per millimeter gate width and output power per unit chip size.
文摘The X-ray pulsar-based navigation is a novel technology for the satellite autonomous navigation. The position and the velocity of the satellite are deterimined by using the pulse phases detected at the satellite and predicted by the pulse timing models. With the detected pulse phase, the satellite position with respect to the Earth center can be calculated along the line-of-sight to the pulsar. Using three pulsars, the satellite position in the in- ertial frame can be resolved. The extended Kalman filter （EKF） algorithm is designed to incorporate the range measurements with the satellite dynamics. Simulation verification shows that the proposed algorithm can accu- rately determine the satellite orbit, with the position error less than 100 m. Furthermore, the factors influencing the navigation performance are also discussed.
基金supported financially by the National Natural Science Foundation(No.41174117)the Major National Science and Technology Projects(No.2011ZX05031–001)
文摘The frequency–space（f–x） empirical mode decomposition（EMD） denoising method has two limitations when applied to nonstationary seismic data. First, subtracting the first intrinsic mode function（IMF） results in signal damage and limited denoising. Second, decomposing the real and imaginary parts of complex data may lead to inconsistent decomposition numbers. Thus, we propose a new method named f–x spatial projection-based complex empirical mode decomposition（CEMD） prediction filtering. The proposed approach directly decomposes complex seismic data into a series of complex IMFs（CIMFs） using the spatial projection-based CEMD algorithm and then applies f–x predictive filtering to the stationary CIMFs to improve the signal-to-noise ratio. Synthetic and real data examples were used to demonstrate the performance of the new method in random noise attenuation and seismic signal preservation.
基金Supported by the Knowledge Innovation Program of Chinese Academy of Sciences (No. KZCX-YW-12-04)the National Natural Science Foundation of China (No. 41030855)+1 种基金the National High Technology Research and Development Program of China (863 Program) (No. 2008AA09A403)the Marine Public Welfare Project of China (No. 201105032)
文摘One of the most important parameters for oceanic internal waves (IWs) is their amplitude. We have developed a method to retrieve the IW amplitude from nautical X-Band radar images based on the KdV equation for continuous stratified finite depth system. We have also tested the method of measuring the amplitude of IWs from X-Band radar backscatter image sequences acquired on June 2009 in the northeastern South China Sea. The method was applied in several radar images. Experiments show that the retrieval amplitudes are consistent with the in-situ observational amplitudes of IWs by using the towed thermistor chain and conductivity-temperature-depth (CTD) profile. The uncertainty of the method is also discussed.
基金Supported by the Knowledge Innovation Program of the Chinese Academy of Sciences (Nos.KZCX1-YW-12-04,KZCX2-YW-201)the Instrument Developing Project of the Chinese Academy of Sciences (No.YZ200724)
文摘A new ocean wave and sea surface current monitoring system with horizontally-(HH) and vertically-(VV) polarized X-band radar was developed.Two experiments into the use of the radar system were carried out at two sites,respectively,for calibration process in Zhangzi Island of the Yellow Sea,and for validation in the Yellow Sea and South China Sea.Ocean wave parameters and sea surface current velocities were retrieved from the dual polarized radar image sequences based on an inverse method.The results obtained from dual-polarized radar data sets acquired in Zhangzi Island are compared with those from an ocean directional buoy.The results show that ocean wave parameters and sea surface current velocities retrieved from radar image sets are in a good agreement with those observed by the buoy.In particular,it has been found that the vertically-polarized radar is better than the horizontally-polarized radar in retrieving ocean wave parameters,especially in detecting the significant wave height below 1.0 m.
基金Supported by the Key Program and the Normal Program of the Knowledge Innovation Program of the Chinese Academy of Sciences (Nos.KZCX1-YW-12-04 and KZCX2-YW-201)the Instrument Developing Project of the Chinese Academy of Sciences (No.YZ200724)
文摘Shipboard X-band radar images acquired on 24 June 2009 are used to study nonlinear internal wave characteristics in the northeastern South China Sea.The studied images show three nonlinear internal waves in a packet.A method based on the Radon Transform technique is introduced to calculate internal wave parameters such as the direction of propagation and internal wave velocity from backscatter images.Assuming that the ocean is a two-layer finite depth system,we can derive the mixed-layer depth by applying the internal wave velocity to the mixed-layer depth formula.Results show reasonably good agreement with in-situ thermistor chain and conductivity-temperature-depth data sets.
文摘A three-stage MMIC power amplifier operating from 6to 18GHz is fabricated using 0.25μm A1GaAs/InGaAs/GaAs pseudomorphic high electron mobility transistor（PHEMT）.The amplifier isfully monolithic,with all matching,biasing,and DC block circuitry included on the chip.Thepower amplifier has an average power gain of 19dB over 6～18GHz.At operation frequenciesfrom 6 to 18GHz,the output power is above 33.3dBm,and the maximum output power of the MMICis 34.7dBm at 10Ghz.The input return loss is less than-10db and the out-put return is lessthan-6dB over operating frequency.This power amplifier has,to our knowledge,the best powergain flatness reported at C-X-Ku-band applications.
基金supported by the National Natural Science Foundation of China (61271406)
文摘The correlation analysis of sea clutter data in a complex domain is conducted in this study. Specific to X-band sea clutter, the statistical characteristics of the complex correlation, particularly the phase characteristics which are closely related to the phase difference of the sea clutter and the Doppler properties, are analyzed in detail based on the experimental data, recorded by the Mc Master University IPIX radar in 1993. That the phase term of the complex correlation presents linear change means that there exists the linearity of phase differences between different time intervals in the X-band sea clutter. This investigation explores the regularities about the effect of wind on the complex correlation with similar patterns for different polarization modes. The regularities indicate that the wind direction can be inferred from the distribution pattern of the complex correlation. Moreover, a model describing the relationships between the statistics of the complex correlation and wind parameters is proposed. The application for target detection based on the differences of characteristics of complex correlations between the sea clutter and the target are also investigated and the proposed features have been confirmed. The principle of the method is fundamental for broader future applications.
基金Supported by the National High Technology Research and Development Program of China(863 Program)(No.2013AA09A505)the National Natural Science Foundation of China(Nos.41076119,41176160,41476158)+4 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the Natural Science Youth Foundation of Jiangsu Province(No.BK2012467)the Natural Science State Key Foundation of Jiangsu Province(No.BK2011008)the National Natural Science Youth Foundation of China(No.41206171)the Startup Foundation for Introducing Talent of Nanjing University of Information Science and Technology(No.S8113078001)
文摘When imaging ocean surface waves by X-band marine radar, the radar backscatter from the sea surface is modulated by the long surface gravity waves. The modulation transfer function （MTF） comprises tilt, hydrodynamic, and shadowing modulations. A conventional linear MTF was derived using HH-polarized radar observations under conditions of deep water. In this study, we propose a new quadratic polynomial MTF based on W-polarized radar measurements taken from heterogeneous nearshore wave fields. This new MTF is obtained using a radar-observed image spectrum and in situ buoy-measured wave frequency spectrum. We validate the MTF by comparing peak and mean wave periods retrieved from X-band marine radar image sequences with those measured by the buoy. It is shown that the retrieval accuracies of peak and mean wave periods of the new MTF are better than the conventional MTF. The results also show that the bias and root mean square errors of the peak and mean wave periods of the new MTF are 0.05 and 0.88 s, and 0.32 and 0.53 s, respectively, while those of the conventional MTF are 0.61 and 0.98 s, and 1.39 and 1.48 s, respectively. Moreover, it is also shown that the retrieval results are insensitive to the coefficients in the proposed MTF.
文摘Objective To observe the imaging findings of congenital megaureter in order to enhance the understanding of this disease. Methods Image data of 5 patients with congenital megaureter and 2 misdiagnosed patients were analyzed, and image findings of congenital megaureter were summarized. Elscint Prestig 2.0T superconductive magnetic resonance urography （MRLI） with conventional sequence （spin-echo, T 1W1560 ms/16 ms; fast spin-echo, T2WI 9600 ms/96 ms） was performed. Raw data were acquired with fast spin-echo sequence from heavy T2-weighted image （9600 ms/120 ms）. Post-processing method of MRH was the maximum in- tensity projection with three-dimensional reconstruction in the workstation. Intravenous pyelography （IVP） was conducted, in which X-ray films were taken 7 minutes, 15 minutes, and 30 minutes after injecting contrast agent, except that in 2 patients the films were taken delayed at 60 and 90 minutes. X-ray retrograde pyelography was performed on 2 patients, successful in one but failed in the other. Results The dilated ureter showed hypointensity on T1-weighted images and hyperintensity on T2-weighted images in conventional MRI. The mass wall was intact, uniform in thickness, and showing hy- pointensity on Tl-weighted and T2-weighted images. The MRH images showed a retroperitoneal mass appearing as an elongated tubular cystic structure spreading from kidney to bladder. MRLI also revealed dilated calices and renal pelvis, pelviureteric obstruction, and renal duplication. The main signs of congenital megaureter in X-urography was significant dilatation of ureter, or normal renal pelvis with ureter dilatation, hydronephrosis, deformity, and displacement. Conclusions MRH with X-urography could visualize the characteristics of congenital megaureter, including the dilation of renal pelvis and ureter, calculi, urinary tract duplication, and stenosis location. The two techniques can complement each other in disease diagnosis and provide more detailed information for preoperative treatment.
