Anisotropy of Trabecular Bone from Ultra-Distal Radius Digital X-Ray Imaging: Effects on Bone Mineral Density and Age

Background: When applied to trabecular bone X-ray images, the anisotropic properties of trabeculae located at ultra-distal radius were investigated by using the trabecular bone scores (TBS) calculated along directions parallel and perpendicular to the forearm. Methodology: Data from more than two hundred subjects were studied retrospectively. A DXA (GE Lunar Prodigy) scan of the forearm was performed on each subject to measure the bone mineral density (BMD) value at the location of ultra-distal radius, and an X-ray digital image of the same forearm was taken on the same day. The values of trabecular bone score along the direction perpendicular to the forearm, TBSx, and along the direction parallel to the forearm, TBSy, were calculated respectively. The statistics of TBSx and TBSy were calculated, and the anisotropy of the trabecular bone, which was defined as the ratio of TBSy to TBSx and changed with subjects’ BMD and age, was reported and analyzed. Results: The results show that the correlation coefficient between TBSx and TBSy was 0.72 (p BMD and age was reported. The results showed that decreased trabecular bone anisotropy was associated with deceased BMD and increased age in the subject group. Conclusions: This study shows that decreased trabecular bone anisotropy was associated with decreased BMD and increased age.

Development and application of a high energy X-ray digital radiography nondestructive testing system for a driving mechanism

A high energy X-ray digital radiography(DR)nondestructive testing(NDT)system has been developed to detect the operating state of a driving mechanism.The system consists of five main subsystems,namely,X-ray generator,image intensifier,image processor,mechanical platform and control subsystem.Owning to the mechanical platform,the X-ray generator and image intensifier are able to rotate around the vertical axis from 0°to 360°in 35 s and move along vertical axis within the range of 500 mm in 20 s.The 450 kV X-ray generator provides a maximum 100 mm penetration depth and a coverage angle of 40°,and the resolution of the scanned image is 66 lp/cm.As is indicated by its applications,the system is featured with fast scanning speed,wide detection range and high imaging quality.It can be applied to inspect the defects in the driving mechanism as well.

Full-field mapping of internal strain distribution in red sandstone specimen under compression using digital volumetric speckle photography and X-ray computed tomography

It is always desirable to know the interior deformation pattern when a rock is subjected to mechanicalload. Few experimental techniques exist that can represent full-field three-dimensional （3D） straindistribution inside a rock specimen. And yet it is crucial that this information is available for fully understandingthe failure mechanism of rocks or other geomaterials. In this study, by using the newlydeveloped digital volumetric speckle photography （DVSP） technique in conjunction with X-ray computedtomography （CT） and taking advantage of natural 3D speckles formed inside the rock due to materialimpurities and voids, we can probe the interior of a rock to map its deformation pattern under load andshed light on its failure mechanism. We apply this technique to the analysis of a red sandstone specimenunder increasing uniaxial compressive load applied incrementally. The full-field 3D displacement fieldsare obtained in the specimen as a function of the load, from which both the volumetric and the deviatoricstrain fields are calculated. Strain localization zones which lead to the eventual failure of the rock areidentified. The results indicate that both shear and tension are contributing factors to the failuremechanism. 2015 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

Evaluation of Diagnostic Efficacy of Digital Subtraction Radiography in the Diagnosis of Simulated External Root Resorption: An <i>in Vitro</i>Study

External root resorption can induce the degeneration of dental cementum and dentine and may extend towards the pulp reductive. Digital subtraction radiography can function as a useful tool in diagnosing degenerative carious lesions. This study investigated the diagnostic value of digital subtraction radiography in detecting external root resorption. This was a descriptive study conducted using the lab trial method. Artificially-induced external root resorption was created in different sizes at the coronal and apical aspects of 20 premolar teeth. Digital radiographs were obtained of each tooth under standard conditions and these radiographs were subtracted by imaging devices. The subtracted images and the digital radiographs were observed by three radiologists. Chi-square, Kappa test, and Z-test were used to analyze the data. The mean of general sensitivity of digital subtraction radiography and direct digital radiography was low in diagnosing 0.05 mm lesions (Sen = 35%), yet, the accuracy index was good for all lesions (Acc ≥ 65%). Other diagnostic parameters were also acceptable. Both types of radiography worked better in diagnosing coronal than apical lesions (P > 0.05). The interpreters (observers) showed a better performance in diagnosing external root resorption using digital subtraction radiography compared to digital radiography. Both modalities were exact and accurate in detecting 0.05 mm lesions as well as other lesions. However, the results of digital subtraction radiography were not significantly different from those of direct digital radiography.

Evaluation of Positive Predictive Value for Digital Panoramic Radiography in Comparison to Ultrasound in the Diagnosis of Calcified Carotid Atheroma

Aim: Detection of calcified carotid atheroma (CCA) has an important role in reducing the incidence of Cerebro Vascular Accident (CVA). The aim of this study was to evaluate efficacy of panoramic digital radiography in detecting atherosclerosis. Methods: It is descriptive-analytical diagnostic study. The people (22 to 62 years old) were referred to a radiology clinic to perform panoramic radiography for diagnosis of CCA. Individuals who were suspected were introduced to the radiology department of dental school to undergo ultrasound evaluation to CCA. For the 41 patients (55 sides), ultrasound was performed. For data analysis, the Chi-square and Fisher's exact test were used. Results: The prevalence of CCA was 2.43%. The PPV of digital panoramic was 45.5%. There was no significant relationship between age (P = 0.14) and sex (P = 0.539) and PPV of digital panoramic. The PPV of digital panoramic was significantly associated with hypertension (P = 0.032). Conclusion: It seems that panoramic can be used to screen patients with a history of hypertension for atherosclerosis.

Comparison via Digital Radiography of Radiopacity Levels of Composite Materials with Various Shades and Viscosities

Aim of the present in vitro study is to evaluate the radiopacity levels of composite resins with various shades and viscosity.10 mm×2 mm discs were prepared from 7 condensable and 4 flowable composites(n=10).An aluminum step wedge ranging from 2.0 to 10.0 mm in thickness was placed on the occlusal film.Digital radiographs were taken using a dental X-ray device and radiographic densities of each step of the aluminum wedge and the samples were recorded to the computer.Five readings were taken and means were calculated.One-Way Anova and Tamhane post hoc tests were performed.While G-eanial Posterior has the highest radiopacity value followed by Filtek Z550,Aelite Flo has the lowest radiopacity value.Posterior composites show higher radiopacity and flowable composites with higher filler loadings have superior radiopacity levels to condensable composites.Enamel and body shades of the composite brands have also statistically significant differences in radiopacity scores.Eventually,radiopacity level of a composite resin material is not affected by the size of fillers;however,the composition,shape and loading of the fillers can specify the radiodensity.

Evaluation of Entrance Skin Radiation Exposure Dose for Pediatrics Examined by Digital Radiography at Asser Central Hospital-KSA

Assessment of entrance skin doses for patients in Digital radiography examinations should be made as a means for the optimization of the radiation protection of the patients. We measured the entrance skin dose (ESD) received by 50 pediatrics undergoing 12 types of diagnostic X-ray examination at Radiology Department of Asser Central Hospital-KSA. The entrance skin dose ESD was determined via measurements parameters: focus to skin distance (FSD), tube current (mAs) and tube voltage (kV) in arithmetical equation. The mean ± SD for ESDs were found to be 0.16 ± 0.03, 0.21 ± 0.01, 0.63 ± 0.26, 0.55 ± 0.09, 0.15 ± 0.05, 0.27 ± 0.06, 0.41 ± 0.19, 0.46 ± 0.18, 0.46 ± 0.12, 0.20 ± 0.02, 0.39 ± 0.01, 0.29 ± 0.03, for PA chest, foot, AP pelvis, PA skull, PA hand, AP arm, ankle, AP shoulder, abdomen, forearm, AP femur, AP elbow consequently. Our study is considered as an attempt to evaluate the ESDs received by digital radiographic x-ray machine for children aged between 2 - 15 years old, taking in our considerations number of other variables. The mean ESD values obtained are found to be within the standard reference. The data obtained may add to the available information in national records for general use. It may provide guidance on where efforts on dose reduction will need to be directed to fulfill the requirements of the optimization process and serve as a reference for future researches.

Rapid digitalization and panoramic evaluation of weld X-ray film

The computer evaluation of weld X-ray film is an attractive technique for weld seam NDT （ nondestructive testing）. To achieve this target, digitalization of film is the first step and automatic defect identification is another key technique. In this paper, a weld X-ray film digitalizing system has been established with linear array CCD and highlight LED light source. Its space resolution can reach 0. 04 mm/pixel and scanning speed can reach 100 mm/s for an industrial film. The transfer function curves of the system have been measured and the results indicate that its image gray resolution can reach 88 G/D at 4. 5D, and its dynamic range can be wider than 2. OD. In order to facilitate the evaluation of large welded structure, a panoramic evaluation algorithm is developed also. The algorithm includes image matching, image fusion and panoramic evaluation of the long linked film image.

Comparative Study of Radiological Changes in Hands and Feet in Patients Suffering from Early Rheumatoid Arthritis by Power Doppler Ultrasound and Direct Digital Radiography

Rheumatoid arthritis is a chronic multisystem disease of unknown cause. The characteristic feature of RA is persistent inflammatory synovitis. The natural history of disease is such that the early months of the disease are critical period during which reversible joint damage occurs. So early diagnosis of RA and appropriate drug application is the only way to save a patient from this crippling disease. In India, the cost of investigations is a significant factor for most of the patients. Ultrasonography or Power Doppler Ultra Sound (PDUS) has the advantage of being economic in spite of its sensitivity in assessing both inflammatory and destructive changes. The aim of the present study was to evaluate the diagnostic efficiency of PDUS in early rheumatoid arthritis. The study was performed with the patients attending Rheumatology Clinic. A total number of 106 patients of clinically suspected rheumatoid arthritis were studied as per selection criteria. Radiological examinations of hands were done by digital radiography and PDUS in a group of 53 patients, assessment of foot changes by PDUS and Digital Radiography were done in another similar group of 53 patients. Final diagnosis by ACR EULAR-2010 criteria is done for all the patients. The comparative study reveals that synovial vascularity as demonstrated by PDUS is much more effective in diagnosing early rheumatoid arthritis, both in hand and in feet than digital radiograph. PDUS of feet may yield earlier and better findings than hands, which is conventionally used in patients suffering from early rheumatoid arthritis.

Application of X-ray digital tomosynthesis in knee joint trauma examination

Objective: To explore the clinical value of X-ray digital tomosynthesis(DTS)in the diagnosis of knee joint fractures. Methods: A total of 28 cases of thoracic trauma, X-ray film cannot be clearly diagnosed or can confirm the diagnosis but the need for further identification of forensic diagnosis of cases of DTS scan and three-dimensional reconstruction in order to control the study. Results: 1. The reconstructed images after DTS scanning showed that the knee joint fractures were clearly diagnosed, and the detection rate of 28 knee joint fractures was 92.86%. 2. DTS scanning could clearly detect the fresh knee joint fracture's fracture line, corresponding line and broken bones. For the old fracture, DTS scanning could clearly show the condition of the fracture end's healing. Conclusions: The technique is of great value in the diagnosis of knee joint fracture, especially in the examination of complex structure, thick body and review of internal fixation after fracture.

Imaging Analysis of Trabecular Bone Texture Based on the Initial Slope of Variogram of Ultra-Distal Radius Digital X-Ray Imaging: Effects on Bone Mineral Density and Age

Background: When applied to trabecular bone X-ray images, a method for analyzing trabecular bone texture based on the initial slope of variogram (ISV) was used to assess the trabecular bone health. Methodology: Data from more than two hundred subjects were retrospectively studied. For each subject, a DXA (GE Lunar Prodigy) scan of the forearm was performed, and bone mineral density (BMD) value was measured at the location of ultra-distal radius, X-ray digital image of the same forearm was taken on the same day, and ISV value over the same location of ultra-distal radius was calculated. Pearson’s correlation coefficients were calculated to examine the correlation between BMD and ISV of the trabecular bones located at the same ultra-distal radius. ISV values changed with subjects’ age were also reported. Results: The results show that ISV value was highly correlated with the DXA-measured BMD of the same trabecular bone located at the ultra-distal radius. The correlation coefficient between ISV and BMD with the 95% confident was 0.79 ± 0.09. They also demonstrated that the age-related changes in trabecular bone health and differentiated age patterns in males and females, respectively. The results showed that the decrease in BMD was accompanied by a decrease in the initial slope of variogram (ISV). Conclusions: This study suggests that ISV might be used to quantitatively evaluate trabecular health for osteoporosis and bone disease diagnosis.

飞利浦Digital Diagnost系列DR设备工作原理及故障维修

文章介绍了飞利浦Digital Diagnost系列DR设备工作原理和同步通讯信号传输时序,分析了X射线无法曝光、成像失败等故障的原因,有针对性地提出了处理措施,以期为同行提供相关经验。

Monte Carlo simulation for bremsstrahlung and photoneutron yields in high-energy x-ray radiography

This paper reports on the results of calculations using a Monte Carlo code （MCNP5） to study the properties of photons, electrons and photoneutrons obtained in the converted target and their transportations in x-ray radiography. A comparison between measurements and calculations for bremsstrahlung and photoneutrons is presented. The radiographic rule and the effect of the collimator on the image are studied with the experimental model. The results provide exact parameters for the optimal design of radiographic layout and shielding systems.

Parallel computing approach for efficient 3-D X-ray-simulated image reconstruction

Accurate 3-dimensional(3-D)reconstruction technology for nondestructive testing based on digital radiography(DR)is of great importance for alleviating the drawbacks of the existing computed tomography(CT)-based method.The commonly used Monte Carlo simulation method ensures well-performing imaging results for DR.However,for 3-D reconstruction,it is limited by its high time consumption.To solve this problem,this study proposes a parallel computing method to accelerate Monte Carlo simulation for projection images with a parallel interface and a specific DR application.The images are utilized for 3-D reconstruction of the test model.We verify the accuracy of parallel computing for DR and evaluate the performance of two parallel computing modes-multithreaded applications(G4-MT)and message-passing interfaces(G4-MPI)-by assessing parallel speedup and efficiency.This study explores the scalability of the hybrid G4-MPI and G4-MT modes.The results show that the two parallel computing modes can significantly reduce the Monte Carlo simulation time because the parallel speedup increment of Monte Carlo simulations can be considered linear growth,and the parallel efficiency is maintained at a high level.The hybrid mode has strong scalability,as the overall run time of the 180 simulations using 320 threads is 15.35 h with 10 billion particles emitted,and the parallel speedup can be up to 151.36.The 3-D reconstruction of the model is achieved based on the filtered back projection(FBP)algorithm using 180 projection images obtained with the hybrid G4-MPI and G4-MT.The quality of the reconstructed sliced images is satisfactory because the images can reflect the internal structure of the test model.This method is applied to a complex model,and the quality of the reconstructed images is evaluated.

Tracking the phase transformation and microstructural evolution of Sn anode using operando synchrotron X-ray energy-dispersive diffraction and X-ray tomography

Tin(Sn)holds great promise as an anode material for next-generation lithium(Li)ion batteries but suffers from massive volume change and poor cycling performance.To clarify the dynamic chemical and microstructural evolution of Sn anode during lithiation and delithiation,synchrotron X-ray energydispersive diffraction and X-ray tomography are simultaneously employed during Li/Sn cell operation.The intermediate Li-Sn alloy phases during de/lithiation are identified,and their dynamic phase transformation is unraveled which is further correlated with the volume variation of the Sn at particle-and electrode-level.Moreover,we find that the Sn particle expansion/shrinkage induced particle displacement is anisotropic:the displacement perpendicular to the electrode surface(z-axis)is more pronounced compared to the directions(x-and y-axis)along the electrode surface.This anisotropic particle displacement leads to an anisotropic volume variation at the electrode level and eventually generates a net electrode expansion towards the separator after cycling,which could be one of the root causes of mechanical detachment and delamination of electrodes during long-term operation.The unraveled chemical evolution of Li-Sn and deep insights into the microstructural evolution of Sn anode provided here could guide future design and engineering of Sn and other alloy anodes for high energy density Li-and Na-ion batteries.

Flash X-ray radiography technique to study the high velocity impact of soft projectile on E-glass/epoxy composite material

In the present paper, the high velocity impact of 9 mm soft lead projectile on 10 mm and 30 mm thick Eglass/epoxy composites was studied using a 450 kV Flash X-ray radiography(FXR) system. The basic parameters of FXR imaging, such as effect of ratio of target to film(TF) and source to target(ST) distances and X-ray penetration thickness of the composite material were optimized based on clarity and the actual dimensions of the objects. The optimized parameters were used in the FXR imaging of the ballistic event of 9 mm soft projectile on E-glass/epoxy composite. The real time deformation patterns of both the projectile and composite target during the ballistic impact were captured and studied at different time intervals. The notable failure modes of the 10 mm thick target with time include fibre breakage, bulging on the back side, delamination, recovery of the bulging, reverse bulging and its recovery. However, with increase in thickness of the target to 30 mm the only failure mechanism observed is the breaking of fibres. The ballistic impact event was also numerically simulated using commercially available LS-DYNA software. The numerically simulated deformation patterns of the projectile and target at different time intervals are closely matching with the corresponding radiographic images.

Low Energy Plasma Focus as an Intense X-ray Source for Radiography

Study on X-ray emission from a low energy (1.8 kJ) plasma focus devicepowered by a 9 μF capacitor bank, charged at 20 kV and giving peak discharge current of about 175kA by using a lead-inserted copper-tapered anode is reported. The X-ray yield in different energywindows is measured as a function of hydrogen filling pressure. The maximum yield in 4π-geometry isfound to be (27.3+-1.1) J and corresponding wall plug efficiency for X-ray generation is 1.52+-0.06%. X-ray emission, presumably due to bombarding activity of electrons in current sheath at theanode tip was dominant, which is confirmed by the pinhole images. The feasibility of the device asan intense X-ray source for radiography is demonstrated.

Head dual energy-computed tomography angiography versus neuro-digital subtraction angiography

Dual-energy X-ray absorptiometry provides two modes of head computed tomography （CT） angiography scanning： neuro-digital subtraction angiography and dual-energy CT angiography （DE-CTA）. Previous studies have compared image quality, radiation exposure, and bone removal between neuro-digital subtraction angiography and DE-CTA. However, the number of cases was relatively small. The present study examined 300 suspected cases of cerebrovascular disease and observed the methods and duration of post-processing, examination time, and data volume. Results demonstrated similar image quality between the two methods, but lower radiation doses and shorter examination time in DE-CTA. DE-CTA allowed for faster and more stable scanning performance and post-processing methods, facilitating accurate and direct diagnosis of cerebrovascular disease.

X-Pinches as Broadband Sources of X-Rays for Radiography

Two methods of using the X-pinch as a source of X-ray radiation for radiography of biological objects are presented. X-pinches are found to be a very flexible method for generation of radiation over a wide spectral range and provide a high spatial and temporal resolution.

Integrating digital twins and deep learning for medical image analysis in the era of COVID-19

Background Digital twins are virtual representations of devices and processes that capture the physical properties of the environment and operational algorithms/techniques in the context of medical devices and tech-nologies.Digital twins may allow healthcare organizations to determine methods of improving medical processes,enhancing patient experience,lowering operating expenses,and extending the value of care.During the present COVID-19 pandemic,various medical devices,such as X-rays and CT scan machines and processes,are constantly being used to collect and analyze medical images.When collecting and processing an extensive volume of data in the form of images,machines and processes sometimes suffer from system failures,creating critical issues for hospitals and patients.Methods To address this,we introduce a digital-twin-based smart healthcare system in-tegrated with medical devices to collect information regarding the current health condition,configuration,and maintenance history of the device/machine/system.Furthermore,medical images,that is,X-rays,are analyzed by using a deep-learning model to detect the infection of COVID-19.The designed system is based on the cascade recurrent convolution neural network(RCNN)architecture.In this architecture,the detector stages are deeper and more sequentially selective against small and close false positives.This architecture is a multi-stage extension of the RCNN model and sequentially trained using the output of one stage for training the other.At each stage,the bounding boxes are adjusted to locate a suitable value of the nearest false positives during the training of the different stages.In this manner,the arrangement of detectors is adjusted to increase the intersection over union,overcoming the problem of overfitting.We train the model by using X-ray images as the model was previously trained on another dataset.Results The developed system achieves good accuracy during the detection phase of COVID-19.The experimental outcomes reveal the efficiency of the detection architecture,which yields a mean average precision rate of 0.94.