A study on some elements and their phases in sediments of Changjiang Estuary by X-ray spectrometer and X-ray diffractometer

INTRODUCTIONThe studies on the quantitative distribution of the conventional elements and their phases in the sediments of the Changjiang Estuary are of great importance to the understanding of the chemical processes of ion exchange, absorption, desorption and flocculation in the estuary.

Assessing efficacy of standard impregnation techniques on die-cast aluminum alloys using X-ray micro-CT

Utilizing lightweight Al alloys in various industrial applications requires achieving precise pressure tightness and leak requirements.Vacuum pressure impregnation(VPI)with thermosetting polymers is commonly used to address leakage defects in die-cast Al alloys.In this study,the efficacy of the VPI technique in sealing alloy parts was investigated using a combination of nondestructive micro X-ray computed tomography(micro XCT)and a standard leak test.The results demonstrate that the commonly used water leak test is insufficient for determining the sealing performance.Instead,micro XCT shows distinct advantages by enabling more comprehensive analysis.It reveals the presence of a low atomic number impregnates sealant within casting defects,which has low grey contrast and allows for visualizing primary leakage paths in 3D.The effective atomic number of impregnated resin is 6.75 and that of Al alloy is 13.69 by dual-energy X-ray CT.This research findings will contribute to enhancing the standard VPI process parameters and the properties of impregnating sealants to improve quality assurance for impregnation in industrial metals.

Improvements to conventional X-ray tube-based cone-beam computed tomography system

Conventional X-ray tube-based cone-beam computed tomography(CX-CBCT) systems have great potential in industrial applications. Such systems can rapidly obtain a three-dimensional(3D) image of an object.Conventional X-ray tubes fulfill the requirements for industrial applications, because of their high tube voltage and power. Continuous improvements have been made to CX-CBCT systems, such as imaging time shortening,acquisition strategy optimization, and imaging software development, etc. In this study, a CX-CBCT system is developed. Additionally, some improvements to the CX-CBCT system are proposed based on the hardware conditions of the X-ray tube and detector. A near-detector(ND)geometry condition is employed to obtain a sharper image and larger detection area. An improved acquisition strategy is proposed to simplify operations and reduce total imaging time. In the ND geometry condition, a simplified method called FBP slice stacking(SS-FBP) is proposed, which can be applied to 3D image reconstruction. SS-FBP is timesaving relative to traditional methods. Furthermore, imaging software for the CX-CBCT system is developed in the MATLAB environment. Several imaging experiments were performed. The results suggest that the CX-CBCT system works properly, and that the above improvements are feasible and practical.

A fast and adaptive method for automatic weld defect detection in various real-time X-ray imaging systems

A first and effective method is proposed to detect weld deject adaptively in various Dypes of real-time X-ray images obtained in different conditions. After weld extraction and noise reduction, a proper template of median filter is used to estimate the weld background. After the weld background is subtracted from the original image, an adaptite threshold segmentation algorithm is proposed to obtain the binary image, and then the morphological close and open operation, labeling algorithm and fids＇e alarm eliminating algorithm are applied to pracess the binary image to obtain the defect, ct detection result. At last, a fast realization procedure jbr proposed method is developed. The proposed method is tested in real-time X-ray image,s obtairted in different X-ray imaging sutems. Experiment results show that the proposed method is effective to detect low contrast weld dejects with few .false alarms and is adaptive to various types of real-time X-ray imaging systems.

Values of high-resolution computed tomography and pulmonary function tests in managements of patients with chronic hepatitis C virus infection

AIM:To investigate pulmonary involvement via pulmonary function tests (PFT) and high-resolution computed tomocjraphy (HRCT) in patients with chronic hepatitis C virus (HCV) infection. METHODS:Thirty-four patients with chronic HCV infection without diagnosis of any pulmonary diseases and 10 healthy cases were enrolled in the study,PFT and HRCT were performed in all cases. RESULTS:A decrease lower than 80% of the predicted value was detected in vital capacity in 9/34 patients,in forced expiratory volume in one second in 8/34 patients,and in forced expiratory flow 25-75 in 15/34 patients,respectively.Carbon monoxide diffusing capacity (DLCO) was decreased in 26/34 patients.Findings of interstitial pulmonary involvement were detected in the HRCT of 16/34 patients.Significant difference was found between controls and patients with HCV infection in findings of HRCT (X^2=4.7,P=0.003).Knodell histological activity index (KHAI) of 28/34 patients in whom liver biopsy was applied was 9.0±4.7.HRCT findings,PFT values and DLCO were not affected by KHAI in patients with HCV infection.In these patients,all the parameters were related with age. CONCLUSION:We suggest that chronic hepatitis C virus infection may cause pulmonary interstitial involvement without evident respiratory symptoms.

Non-destructive study of fruits using grating-based X-ray imaging

Grating-based X-ray imaging can make use of conventional tube sources to provide absorption, refraction and scattering contrast images from a single set of projection images efficiently. In this paper, a fresh cherry tomato and a dried umeboshi are imaged by using X-ray Talbot–Lau interferometer. The seed distribution in the scattering image of the cherry tomato, and the wrinkles of epicarp in the refraction image of the umeboshi, are shown distinctly. The refraction and scattering images provide more information on subtle features than the absorption image. Also, the contrast-to-noise ratio values show distinguishing capacity of the three kinds of imaging techniques. The results confirm that grating-based X-ray imaging is of great potential in non-destructive fruit testing.

Application of molybdenum target X-ray photography in imaging analysis of caudal intervertebral disc degeneration in rats

BACKGROUND Conventional plain X-ray images of rats,the most common animals used as degeneration models,exhibit unclear vertebral structure and blurry intervertebral disc spaces due to their small size,slender vertebral bodies.AIM To apply molybdenum target X-ray photography in the evaluation of caudal intervertebral disc(IVD)degeneration in rat models.METHODS Two types of rat caudal IVD degeneration models(needle-punctured model and endplate-destructed model)were established,and their effectiveness was verified using nuclear magnetic resonance imaging.Molybdenum target inspection and routine plain X-ray were then performed on these models.Additionally,four observers were assigned to measure the intervertebral height of degenerated segments on molybdenum target plain X-ray images and routine plain X-ray images,respectively.The degeneration was evaluated and statistical analysis was subsequently conducted.RESULTS Nine rats in the needle-punctured model and 10 rats in the endplate-destructed model were effective.Compared with routine plain X-ray images,molybdenum target plain X-ray images showed higher clarity,stronger contrast,as well as clearer and more accurate structural development.The McNemar test confirmed that the difference was statistically significant(P=0.031).In the two models,the reliability of the intervertebral height measured by the four observers on routine plain X-ray images was poor(ICC<0.4),while the data obtained from the molybdenum target plain X-ray images were more reliable.CONCLUSIONMolybdenum target inspection can obtain clearer images and display fine calcification in the imaging evaluation of caudal IVD degeneration in rats,thus ensuring a more accurate evaluation of degeneration.

Measurement of niobium reaction rate for material surveillance tests in fast reactors

A highly accurate and precise technique for measurement of the 93 Nb(n,n’)93m Nb reaction rate was established for the material surveillance tests,etc.in fast reactors.The self-absorption effect on the measurement of the characteristic X-rays emitted by 93m Nb was decreased by the dissolution and evaporation to dryness of niobium dosimeter.A highly precise count of the number of 93 Nb atoms was obtained by measuring the niobium solution concentration using inductively coupled plasma mass spectrometry.X-rays of 93m Nb were measured accurately by means of comparing the X-ray intensity of irradiated niobium solution with that of the solution in which stable 93 Nb was added.The difference between both intensities indicates the effect of 182 Ta,which is generated from an impurity tantalum,and the intensity of X-rays from 93m Nb was evaluated.Measurement error of the 93 Nb(n,n’)93m Nb reaction rate was reduced to be less than 4%,which was equivalent to the other reaction rate errors of dosimeters used for Joyo dosimetry.In addition,an advanced technique using Resonance Ionization Mass Spectrometry was proposed for the precise measurement of 93m Nb yield,and 93m Nb will be resonance-ionized selectively by discriminating the hyperfine splitting of the atomic energy levels between 93 Nb and 93m Nb at high resolution.

Computer-Aided Design of X-Ray Microtomographic Scanners

The article is to study the development of computer-aided design of X-ray microtomography—the device for investigating the structure and construction of three-dimensional images of organic and inorganic objects on the basis of shadow projections. This article provides basic information regarding CAD of X-ray microtomography and a scheme consisting of three levels. The article also shows basic relations of X-ray computed tomography, the generalized scheme of an X-ray microtomographic scanner. The methods of X-ray imaging of the spatial microstructure and morphometry of materials are described. The main characteristics of an X-ray microtomographic scanner, the X-ray source, X-ray optical elements and mechanical components of the positioning system are shown. The block scheme and software functional scheme for intelligent neural network system of analysis of the internal microstructure of objects are presented. The method of choice of design parameters of CAD of X-ray microtomography aims at improving the quality of design and reducing costs of it. It is supposed to reduce the design time and eliminate the growing number of engineers involved in development and construction of X-ray microtomographic scanners.

Radiological and X-Ray Diffraction Characterization of Bauxite and Rutile Ore Contaminated Environment in Kanam and Wase Mineral Exploration Sites, Plateau State-Nigeria

Two non-destructive analytical techniques (gamma spectrometer and X-ray diffractometer) were employed in the analysis of bauxite and rutile ore and their vicinity soil and control sourced within the Kanam and Wase mineral exploration sites. The activity concentrations of natural radionuclides 238U, 232Th, and 40K in the soil samples received from bauxite and rutile mineral mining vicinities revealed high concentrations of 238U, 232Th, and 40K compared to the control soil samples sourced 500 m away from the mineral exploration vicinities. Radiological detriments RLI, AUI, Hin and Hex unveiled values exceeding the radiation standard concentration (>1) for soil. X-ray diffraction characterization of bauxite ore revealed the interlocking minerals of Bauxite (18)%, Albite (11)%, Garnet (15)%, Illite (6)% and Muscovite (43)% in various proportions obtained within the 2θ range (9.18 to 64.4) and a peak value (intensity, cps) of 3400. Pure bauxite percentage in the ore meets metallurgical grade (15 - 25)%. X-ray diffraction of rutile ore revealed the minerals of rutile (40)%, quartz (21.4)%, ilmenite (27)% and garnet (11.8)% found within the 2θ range (27.5 to 35.6) and a peak value intensity of 31.1 - 100.0 cps also meeting the metallurgical grade of 15% - 25%. The major environmental concern associated with the mineral-sands industry is the radiation hazards, pollution of ground-water sources from heavy metals, mineral transport with heavy equipment’s, dredging operations in fragile coastal area and clearing of vegetation.

Fast and Low Cost X-Ray Stereoradiography Displayed on a 3D Monitor

Conventional x-ray stereoradiography based on film radiography is not practical due to its inconvenient and time-consuming procedures. In this research, an image viewing system consisted of a 30 cm × 30 cm gadolinium oxy-sulfide (GOS) fluorescent screen and a Cannon 500D digital camera were designed and constructed for real-time and near real-time x-ray imaging. The camera was connected to a laptop computer via USB port to allow remote camera setting and control as well as view image on the computer. The system was tested with x-rays generated from a Rigaku x-ray tube for its response at various camera settings and exposure times. The image brightness increased with increasing of the camera ISO setting and with the exposure time as expected. To test the system performance, two test specimens were radiographed including a video camera and a floppy disk drive as well as two simulated specimens. Each of the test specimens was also radiographed at two positions by moving the specimens approximately 6 cm from the first position. The two radiographs of each specimen were then combined to make an anaglyph image that could be viewed in 3D on a normal LCD or LED monitor by using appropriate color glasses. When the two radiographs were combined to make MPO (multiple object) file format, it could be viewed in 3D on a 3D monitor with or without 3D glasses depending on type of the monitor. The developed system could be conveniently employed for routine inspection of a specimen both in 2D and 3D within a minute.

Quantitative analysis of deformation in hollow cylinder tests on anisotropic clay formations

A series of triaxial laboratory experiments are performed on thick-walled hollow cylindrical samples of boom clay.The aim of this testing program is to better understand the anisotropic deformation during the excavation.The testing conditions are similar to those to be experienced by host rocks around disposal galleries for radioactive waste.X-ray computed tomography is performed at different steps for each test with the samples remaining inside the loading cell.Initial analysis of the tomography images allows of the observation of the deformation of the central hole.In addition,particles manual tracking and 3D volumetric digital image correlation processing methods are considered being used to analyze the particles displacements and the boundary deformation of the sample quantitatively.An unsymmetrical damaged zone is induced around the hole,with a reverse deformation trend being found at the boundary after unloading,which indicates that the significant anisotropic deformation of boom clay can be induced by mechanical unloading.

The Calibration and Use of a New Ring-Shaped Ionization Chamber for Monitoring and Dosimetry of X-Ray Beams

Today, dosimeters are used generally for dosimetry of the diagnostic X-ray beam. Ionization chambers are appropriate instruments for monitoring and also the dosimetry of X-ray beam in medical diagnostic equipment. The present work introduces design and investigation of a new ring-shaped monitor chamber with a PMMA body, graphite-coated PMMA windows (0.5 mm thick), a special graphite-foil central electrode (0.1 mm thick, 0.7 g/cm3 dense) that creating two sensitive volumes and a central hole for crossing the radiation beam with less attenuation. The results of performance tests conducted at the Nuclear Science and Technology Research Institute, AEOI in Karaj- Iran proved the high short and long-term stability, the very low leakage current, the low directional dependence and very high ion collection efficiency through the special design of the collecting electrode. Moreover, the FLUKA Monte Carlo simulations certified the negligible effect of central electrode on this new ring-shaped monitor chamber. According to the results of the performance tests, the new monitor chamber can be used as a standard dosimeter in order to monitor X-ray beam in primary standard dosimetry laboratories.

X-Ray Image Interpretation Guide for Aviation Aluminum Alloy Castings

The purpose of this paper is to introduce the basic steps of X-ray image interpretation of aviation castings,so as to provide a learning guidance for beginners and reduce the exploration time.Among them,the introduction of specifications,the requirements for image quality,and the application of reference radiographs are just a sorting out the key points.If there is a need for practical application,we should conduct a deeper exploration and understanding of each specification,not just cite this article.

帕纳科X射线衍射仪开放式变温加热台的研制与应用

本研究根据科学研究工作的实际需求,成功研制了一套开放式变温加热台,可在不更换帕纳科X射线衍射仪附件的情况下,进行X射线衍射原位变温测试。通过对变温加热台进行峰位比对、温度校准以及实际样品的测试分析,结果表明:该开放式变温加热台的测试结果准确可靠,稳定性好。此外,该加热台安装便捷,不仅提高了测试效率和科学服务水平,还节省了大额的购置费用.

In-situ X-ray computed tomography tensile tests and analysis of damage mechanism and mechanical properties in laser powder b e d fused Invar 36 alloy

Laser powder bed fusion(LPBF)is a potential additive manufacturing process to manufacture Invar 36 alloy components with complicated geometry.Whereas it inevitably introduces specific microstructures and pore defects,which will further influence the mechanical properties.Hence,aiming at exploring the LPBF process-related microstructures and pore defects,and especially their influences on the damage mechanism and mechanical properties,Invar 36 alloy was manufactured by LPBF under designed different laser scanning speeds.The microstructure observations reveal that higher scanning speeds lead to equiaxed and short columnar grains with higher dislocation density,while lower scanning speeds result in elongated columnar grains with lower dislocation density.The pore defects analyzed by X-ray computed tomography(XCT)suggest that the high laser scanning speed gives rise to numerous lamellar and large lack-of-fusion(LOF)pores,and the excessively low laser scanning speed produces relatively small keyhole pores with high sphericity.Moreover,the insitu XCT tensile tests were originally performed to evaluate the damage evolution and failure mechanism.Specifically,high laser scanning speed causes brittle fracture due to the rapid growth and coalescence of initial lamellar LOF pores along the scan-ning direction.Low laser scanning speed induces ductile fracture originating from unstable depressions in the surfaces,while metallurgical and keyhole pores have little impact on damage evolution.Eventually,the process-structure-property correlation is established.The presence of high volume fraction of lamel-lar LOF pores,resulting from high scanning speed,leads to inferior yield strength and ductility.Besides,specimens without LOF pores exhibit larger grain sizes and lower dislocation density at decreased scanning speeds,slightly reducing yield strength while slightly enhancing ductility.This understanding lays the foundation for widespread applications of LPBF-processed Invar 36 alloy.

Three-dimensional finite element simulation and reconstruction of jointed rock models using CT scanning and photogrammetry

The geometry of joints has a significant influence on the mechanical properties of rocks.To simplify the curved joint shapes in rocks,the joint shape is usually treated as straight lines or planes in most laboratory experiments and numerical simulations.In this study,the computerized tomography (CT) scanning and photogrammetry were employed to obtain the internal and surface joint structures of a limestone sample,respectively.To describe the joint geometry,the edge detection algorithms and a three-dimensional (3D) matrix mapping method were applied to reconstruct CT-based and photogrammetry-based jointed rock models.For comparison tests,the numerical uniaxial compression tests were conducted on an intact rock sample and a sample with a joint simplified to a plane using the parallel computing method.The results indicate that the mechanical characteristics and failure process of jointed rocks are significantly affected by the geometry of joints.The presence of joints reduces the uniaxial compressive strength (UCS),elastic modulus,and released acoustic emission (AE) energy of rocks by 37%–67%,21%–24%,and 52%–90%,respectively.Compared to the simplified joint sample,the proposed photogrammetry-based numerical model makes the most of the limited geometry information of joints.The UCS,accumulative released AE energy,and elastic modulus of the photogrammetry-based sample were found to be very close to those of the CT-based sample.The UCS value of the simplified joint sample (i.e.38.5 MPa) is much lower than that of the CT-based sample (i.e.72.3 MPa).Additionally,the accumulative released AE energy observed in the simplified joint sample is 3.899 times lower than that observed in the CT-based sample.CT scanning provides a reliable means to visualize the joints in rocks,which can be used to verify the reliability of photogrammetry techniques.The application of the photogrammetry-based sample enables detailed analysis for estimating the mechanical properties of jointed rocks.

样品质量控制对X射线衍射测量结果的影响

以生物材料羟基磷灰石(HA)为样品模型,系统研究了HA样品在不同质量状态下对X射线衍射测试结果的作用。通过考察样品状态确认(块体、层状和粉末等)、实验方法选择(粉末多晶衍射和薄膜掠入射衍射等)以及环境条件控制(温度、湿度及X射线下辐照时间等)等因素,评价样品的质量控制对X射线衍射(XRD)检测数据准确性与真实性的影响。结果表明,与HA块状样品相比,经过研磨过筛处理后的粉末试样XRD特征峰强度显著增强,差异可增加至1倍以上。针对HA多层状生长样品,结合掠入射和常规粉末衍射可精准实现各层物相解析。HA粉末样品的粒径、样品量及对应的装填方式会影响XRD检测结果,粒径37μm的HA粉末样品的特征峰强是粒径137μm样品1倍左右;而少量样品的中部空置制样,可导致特征峰峰位由31.8(°)偏移至31.4(°),峰强从11213.68降到601.65。另外,对于稳定性不佳或对环境温湿度敏感的试样,采取合适的保存和检测方式,可有效预防和避免错误的检测与结果分析。因此,全面的质量控制对高质量的XRD检测数据获取和确保实验数据质量至关重要。

单晶衍射测试条件对小分子化合物衍射数据的影响

为优化Rigaku Saturn 724单晶衍射仪测定小分子化合物结构的测试条件,本文测定了标准晶体胞嘧啶核苷的衍射数据,比较了曝光时间、晶体与面探测器的距离、样品温度和数据收集方式对于测试结果的影响.结果表明,合适的曝光时间、较低的温度、较小的晶体与探头的距离和以较高对称性收集数据有利于提高小分子化合物衍射数据的质量,解析结果较好.

Mechanical properties and acoustic emission characteristics of thick hard roof sandstone in Shendong coal field

The mechanical properties and acoustic emission characteristics of thick hard roof sandstone were investigated. Samples were taken from the 30.87-m thick sandstone roof in a mine in the Shengdong coal field, China. Firstly, the composition and microscopic characteristics were analyzed by XRD and FE-SEM, respectively. Moreover, the indirect tensile test, uniaxial compression test, three axis compression experiment and AE test are carried out by using RMT-150C mechanics experiment system with DSS-8B AE test system. The experiment results indicate that the main framework particles of sandstone are quartz and feldspar, and mainly quartz. Cements are mainly pyrite, kaolinite, chlorite and zeolite cross needle, clinochlore, and clay minerals. The microstructure of sandstone is very dense, with few pores and high cementation degree. The tensile strength, compressive strength and elastic modulus of sandstone are 4.825, 85.313 MPa, 13.814 GPa, respectively, so the sandstone belongs to hard rock. The AE cumulative counts of sandstone can be divided into three phases： relatively flat growth period, rapid growth period and spurt period. The signal strength of AE waveform can be used as a warning signal. In the tensile fracture zone, the warning value is 0.4 mV, and in the compression shear failure zone, it is 4 mV. The numbers of cumulative counts of AE under different stress conditions have obvious difference. Moreover, the growth of cumulative counts of acoustic emission is more obvious when the stress is more than 60% of the peak stress.