Fatigue crack growth tests were carried out on the SEN B3 precracked specimens, with dimensions in accordance with ISO 12108 requirements. The specimens were made of martensitic stainless steel, X17CrNi15-2, and some ...Fatigue crack growth tests were carried out on the SEN B3 precracked specimens, with dimensions in accordance with ISO 12108 requirements. The specimens were made of martensitic stainless steel, X17CrNi15-2, and some of them were modified by the ceramic coating deposition surface treatment. The effects of ceramic coating, on the fatigue crack growth behaviour of hollow shaft specimens, were experimentally investigated. Fatigue crack growth rates, da/dN, were characterised, using the power law relationship between da/dN (in mm/cycle) and the stress intensity factor range, ΔK (in MPa∙m0.5). The two constants of the correlation are 7.9768 × 10−9 and 2.8107 for the parent material, and those for the coated material are 2.4391 × 10−9 and 3.1990, respectively. Microstructural analyses were carried out on the tested specimens, which shows that the maximum hardness of the ceramic coating is higher than that of substrate by a factor of ~3.2. The dimple fracture dominates the final fracture mechanism for the parent material, and the combination of fatigue, ductile fracture and cleavage dominates the final fracture mechanism for the coated material, based on the SEM analyses. EDS tests’ results reveal that the parent material specimen shows higher levels of C at matrix regions along with Fe- and O-rich regions, compared with the coated material specimen.展开更多
A new jatrophane diterpenoid ester （2S, 3S, 4R, 5R, 7S, 8R, 13R, 15R） - 3, 5, 7, 8, 15- pentaacetoxy-9, 14-dioxojatropha-6（17）, 11E-diene was isolated from the whole plant of Euphorbia turczaninowii Kar. ＆ Kit.. ...A new jatrophane diterpenoid ester （2S, 3S, 4R, 5R, 7S, 8R, 13R, 15R） - 3, 5, 7, 8, 15- pentaacetoxy-9, 14-dioxojatropha-6（17）, 11E-diene was isolated from the whole plant of Euphorbia turczaninowii Kar. ＆ Kit.. Its structure was characterized by spectral analysis and confurmed by X-ray crystallographic analysis.展开更多
文摘Fatigue crack growth tests were carried out on the SEN B3 precracked specimens, with dimensions in accordance with ISO 12108 requirements. The specimens were made of martensitic stainless steel, X17CrNi15-2, and some of them were modified by the ceramic coating deposition surface treatment. The effects of ceramic coating, on the fatigue crack growth behaviour of hollow shaft specimens, were experimentally investigated. Fatigue crack growth rates, da/dN, were characterised, using the power law relationship between da/dN (in mm/cycle) and the stress intensity factor range, ΔK (in MPa∙m0.5). The two constants of the correlation are 7.9768 × 10−9 and 2.8107 for the parent material, and those for the coated material are 2.4391 × 10−9 and 3.1990, respectively. Microstructural analyses were carried out on the tested specimens, which shows that the maximum hardness of the ceramic coating is higher than that of substrate by a factor of ~3.2. The dimple fracture dominates the final fracture mechanism for the parent material, and the combination of fatigue, ductile fracture and cleavage dominates the final fracture mechanism for the coated material, based on the SEM analyses. EDS tests’ results reveal that the parent material specimen shows higher levels of C at matrix regions along with Fe- and O-rich regions, compared with the coated material specimen.
文摘A new jatrophane diterpenoid ester （2S, 3S, 4R, 5R, 7S, 8R, 13R, 15R） - 3, 5, 7, 8, 15- pentaacetoxy-9, 14-dioxojatropha-6（17）, 11E-diene was isolated from the whole plant of Euphorbia turczaninowii Kar. ＆ Kit.. Its structure was characterized by spectral analysis and confurmed by X-ray crystallographic analysis.
