MULTIPLE INTERSECTIONS OF SPACE-TIME ANISOTROPIC GAUSSIAN FIELDS

Let X={X(t)∈R^(d),t∈R^(N)}be a centered space-time anisotropic Gaussian field with indices H=(H_(1),…,H_(N))∈(0,1)~N,where the components X_(i)(i=1,…,d)of X are independent,and the canonical metric√(E(X_(i)(t)-X_(i)(s))^(2))^(1/2)(i=1,…,d)is commensurate with■for s=(s_(1),…,s_(N)),t=(t_(1),…,t_(N))∈R~N,α_(i)∈(0,1],and with the continuous functionγ(·)satisfying certain conditions.First,the upper and lower bounds of the hitting probabilities of X can be derived from the corresponding generalized Hausdorff measure and capacity,which are based on the kernel functions depending explicitly onγ(·).Furthermore,the multiple intersections of the sample paths of two independent centered space-time anisotropic Gaussian fields with different distributions are considered.Our results extend the corresponding results for anisotropic Gaussian fields to a large class of space-time anisotropic Gaussian fields.

{1012}twin–twin intersection-induced lattice rotation and dynamic recrystallization in Mg–6Al–3Sn–2Zn alloy

This study investigated the formation mechanism of new grains due to twin–twin intersections in a coarse-grained Mg–6Al–3Sn–2Zn alloy during different strain rates of an isothermal compression.The results of electron backscattered diffraction investigations showed that the activated twins were primarily{1012}tension twins,and 60°<1010>boundaries formed due to twin–twin intersections under different strain rates.Isolated twin variants with 60°<1010>boundaries transformed into new grains through lattice rotations at a low strain rate(0.01 s^(−1)).At a high strain rate(10 s^(−1)),the regions surrounded by subgrain boundaries through high-density dislocation arrangement and the 60°<1010>boundaries transformed into new grains via dynamic recrystallization.

Safe Efficient Policy Optimization Algorithm for Unsignalized Intersection Navigation

Unsignalized intersections pose a challenge for autonomous vehicles that must decide how to navigate them safely and efficiently.This paper proposes a reinforcement learning(RL)method for autonomous vehicles to navigate unsignalized intersections safely and efficiently.The method uses a semantic scene representation to handle variable numbers of vehicles and a universal reward function to facilitate stable learning.A collision risk function is designed to penalize unsafe actions and guide the agent to avoid them.A scalable policy optimization algorithm is introduced to improve data efficiency and safety for vehicle learning at intersections.The algorithm employs experience replay to overcome the on-policy limitation of proximal policy optimization and incorporates the collision risk constraint into the policy optimization problem.The proposed safe RL algorithm can balance the trade-off between vehicle traffic safety and policy learning efficiency.Simulated intersection scenarios with different traffic situations are used to test the algorithm and demonstrate its high success rates and low collision rates under different traffic conditions.The algorithm shows the potential of RL for enhancing the safety and reliability of autonomous driving systems at unsignalized intersections.

The prediction of projectile-target intersection for moving tank based on adaptive robust constraint-following control and interval uncertainty analysis

To improve the hit probability of tank at high speed,a prediction method of projectile-target intersection based on adaptive robust constraint-following control and interval uncertainty analysis is proposed.The method proposed provides a novel way to predict the impact point of projectile for moving tank.First,bidirectional stability constraints and stability constraint-following error are constructed using the Udwadia-Kalaba theory,and an adaptive robust constraint-following controller is designed considering uncertainties.Second,the exterior ballistic ordinary differential equation with uncertainties is integrated into the controller,and the pointing control of stability system is extended to the impact-point control of projectile.Third,based on the interval uncertainty analysis method combining Chebyshev polynomial expansion and affine arithmetic,a prediction method of projectile-target intersection is proposed.Finally,the co-simulation experiment is performed by establishing the multi-body system dynamic model of tank and mathematical model of control system.The results demonstrate that the prediction method of projectile-target intersection based on uncertainty analysis can effectively decrease the uncertainties of system,improve the prediction accuracy,and increase the hit probability.The adaptive robust constraint-following control can effectively restrain the uncertainties caused by road excitation and model error.

Research of Fly over as a Solution to Congestion of Intersection Junction(Case Study:Jalan Jatingaleh Semarang)

In the next few years traffic will happen most of the time.This was triggered by the growing rate of vehicles against the road capacity which is not balance.All the time the congestion in the city of Semarang has been occurred at peak hours.Congestion also occurred in between Teuku Umar and Setia Budi road Jatingaleh because of a plot intersection(Kesatrian intersection,PLN intersection and Jatingaleh intersection)with the Toll Road.Jatingaleh is located in the southern city of Semarang which is a central meeting point between the upper and lower Semarang where the vehicle flows in through a combination of local current and regional traffic,and the flow of vehicles coming in and out from highway.The main cause of the problems that occurred in the area of Jatingaleh is due to the numbers of vehicles movement that occurs at the intersections.With the above issues,it is necessary to analyse the existing conditions and look into some solutions.Before carrying out an analysis a field surveys at peak hours for example morning(06:00 to 08:00 am)and for the afternoon(04:00 to 06:00 pm)should be conducted,then the number of vehicles is counted manually with“short-breakcounting”according to types of vehicles.From the analysis we found that the degree of saturation(DS)is 1.61 between Teuku Umar and Setia Budi road during the morning peak hours and 1.56 during the afternoon peak hours.This means that the capacity of the existing road is no longer able to accommodate the traffic flow.One of the solutions for the congestion that occurs at the intersection of Jatingaleh is to apply the efficiency of the intersection that is not in a plot with a Fly over,Underpass and the combination of Fly Over-Underpass.Base on the flow reduction calculation with 3 comparative modeling it shows that the Fly Over is the most technically efficient to be applied in this research.

Proactive Platooning Based on C-V2X to Relieve Congestion at a Signalized Intersection

Nowadays urban traffic congestion becomes a major issue due to the increase in vehicles that lead to more commuting time,accidents,traffic violations,and high fuel consumption.Platooning is a good way to solve traffic congestion because it drives with a smaller inter-vehicle distance than human-driving.This paper proposes proactive platooning based on C-V2X(cellular vehicle-to-everything)to relieve congestion.Proactive platooning reduces the inter-vehicle distance and increases the throughput of signalized intersections through integrating the networked control platooning and computation-centralized platooning.Model and simulation experiments of proactive platooning were conducted to verify the impact of inter-vehicle distance on platooning latency,platooning safety,and traffic throughput.Simulation results show that the optimal inter-vehicle distance under proactive platooning is less than half of human-driving at a signalized intersection.

基于Y-shaped路网的早高峰拼车定价策略

针对交通资源配置有限导致的早高峰通勤拥堵问题,借鉴共享经济理论,引入拼车出行概念,充分考虑通勤者出行方式和Y-shaped路网特点,建立了基于通勤者出行效益的拼车定价模型.模型结合费用补偿机制,讨论了以平台利润最大化和系统负效用最小化为目标的拼车定价策略,并给出了定价策略有效的阈值条件.研究结果表明,当通勤者都参与到拼车服务中时,拼车平台利润和交通系统负效用在其相应拼车定价策略下均能达到最优值,并且以交通系统负效用最小化为目标的拼车定价策略能消除Y-shaped路网中瓶颈处的交通拥堵.

Analysis of Stopping Behavior at Rural T-Intersections Using Naturalistic Driving Study Data

Rural intersections account for around 30% of crashes in rural areas and 6% of all fatal crashes, representing a significant but poorly understood safety problem. Crashes at rural intersections are also problematic since high speeds on intersection approaches are present which can exacerbate the impact of a crash. Additionally, rural areas are often underserved with EMS services which can further contribute to negative crash outcomes. This paper describes an analysis of driver stopping behavior at rural T-intersections using the SHRP 2 Naturalistic Driving Study data. Type of stop was used as a safety surrogate measure using full/rolling stops compared to non-stops. Time series traces were obtained for 157 drivers at 87 unique intersections resulting in 1277 samples at the stop controlled approach for T-intersections. Roadway (i.e. number of lanes, presence of skew, speed limit, presence of stop bar or other traffic control devices), driver (age, gender, speeding), and environmental characteristics (time of day, presence of rain) were reduced and included as independent variables. Results of a logistic regression model indicated drivers were less likely to stop during the nighttime. However presence of intersection lighting increased the likelihood of full/rolling stops. Presence of intersection skew was shown to negatively impact stopping behavior. Additionally drivers who were traveling over the posted speed limit upstream of the intersection approach were less likely to stop at the approach stop sign.

Novel Distance Measures on Hesitant Fuzzy Sets Based on Equal-Probability Transformation and Their Application in Decision Making on Intersection Traffic Control

The purpose of this study is to reduce the uncertainty in the calculation process on hesitant fuzzy sets(HFSs).The innovation of this study is to unify the cardinal numbers of hesitant fuzzy elements(HFEs)in a special way.Firstly,a probability density function is assigned for any given HFE.Thereafter,equal-probability transformation is introduced to transform HFEs with different cardinal numbers on the condition into the same probability density function.The characteristic of this transformation is that the higher the consistency of the membership degrees in HFEs,the higher the credibility of the mentioned membership degrees is,then,the bigger the probability density values for them are.According to this transformation technique,a set of novel distance measures on HFSs is provided.Finally,an illustrative example of intersection traffic control is introduced to show the usefulness of the given distance measures.The example also shows that this study is a good complement to operation theories on HFSs.

Automatic Lane-Level Intersection Map Generation using Low-Channel Roadside LiDAR

A lane-level intersection map is a cornerstone in high-definition(HD) traffic network maps for autonomous driving and high-precision intelligent transportation systems applications such as traffic management and control, and traffic accident evaluation and prevention. Mapping an HD intersection is time-consuming, labor-intensive, and expensive with conventional methods. In this paper, we used a low-channel roadside light detection and range sensor(LiDAR) to automatically and dynamically generate a lane-level intersection, including the signal phases, geometry, layout, and lane directions. First, a mathematical model was proposed to describe the topology and detail of a lane-level intersection. Second, continuous and discontinuous traffic object trajectories were extracted to identify the signal phases and times. Third, the layout, geometry, and lane direction were identified using the convex hull detection algorithm for trajectories. Fourth, a sliding window algorithm was presented to detect the lane marking and extract the lane, and the virtual lane connecting the inbound and outbound of the intersection were generated using the vehicle trajectories within the intersection and considering the traffic rules. In the field experiment, the mean absolute estimation error is 2 s for signal phase and time identification. The lane marking identification Precision and Recall are96% and 94.12%, respectively. Compared with the satellite-based,MMS-based, and crowdsourcing-based lane mapping methods,the average lane location deviation is 0.2 m and the update period is less than one hour by the proposed method with low-channel roadside LiDAR.

Law and Literature: Exploring the Intersection of Two Fields

This article aims to explore the intersection of law and literature,analyzing their connections and influences.First,the article introduces the definitions and basic characteristics of law and literature,emphasizing their similarities and differences.Then,the article discusses how literary works involve legal issues and how law becomes the subject and background of literary works.In addition,the article studies the interaction between law and literature,exploring the impact of novels on legal practice,and how legal texts are rewritten and interpreted in literary works.Finally,the article summarizes the relationship between law and literature and offers some prospects and reflections.

Mechanical analysis of the femoral neck dynamic intersection system with different nail angles and clinical applications

BACKGROUND The femoral neck dynamic intersection system(FNS)is mechanically more stable than other internal fixation techniques.Current studies have confirmed that the structural design of FNS has good biomechanical properties in European and American populations.However,whether the suitability of the FNS's 130°main nail angle design for Asian populations has been thoroughly investigated remains unclear.AIM To compare the biomechanical stability differences among different main nail angles of the FNS in the treatment of femoral neck fractures in Asian populations.METHODS Computed tomography data of the femur of healthy adult male volunteers were imported into Mimics software to create a three-dimensional model of the femur.The model was adapted to the curve using Geomagic software and imported into Solidworks software to construct the Pauwels I femoral neck fracture model and design the FNS internal fixation model using different main nail angles.Afterward,the models were assembled with the FNS fracture model and meshed using the preprocessing Hypermesh software.Subsequently,they were imported into Abaqus software to analyze and evaluate the biomechanical effects of different angles of the FNS main nail on the treatment of femoral neck fractures.RESULTS The peak displacement of the proximal femur under different angles of FNS fixation under stress was 7.446 millimeters in the 120°group and 7.416 millimeters in the 125°group;in the 130°,135°,and 140°FNS fixation groups,the peak displacement was 7.324 millimeters,8.138 millimeters,and 8.246 millimeters,respectively.In the 120°and 125°FNS fixation groups,the maximum stresses were concentrated at the main nail and the anti-rotation screw,which intersected the fracture line of the femur neck,resulting in peak stresses of 200.7 MPa and 138.8 MPa,respectively.Peak stresses of 208.8 MPa,219.8 MPa,and 239.3 MPa were observed on the angular locking plate distal to the locking screw in the 130°,135°,and 140°fixation groups.CONCLUSION FNS has significant stress distribution properties,a minimal proximal femoral displacement,and an optimal stability for treating femoral neck fractures in Asian populations when performed with a 130°main nail angle.

Characteristics and risk of violation behavior of non-motorists at signalized intersections

Aiming at prevalent violations of non-motorists at urban intersections in China, this paper intends to clarify the characteristics and risks of non-motorist violations at signalized intersections through questionnaires and video recordings, which may serve as a basis for non-motorized vehicle management. It can help improve the traffic order and enhance the degree of safety at signalized intersections. To obtain the perception information, a questionaire survey on the Internet was conducted and 972 valid questionnaires were returned. It is found that academic degree contributes little to non-motorist violations, while electrical bicyclists have a relatively higher frequency of violations compared with bicyclists. The video data of 18 228 non-motorist behaviors indicate that the violation rate of all non-motorists is 26.5%; the number of conflicts reaches 1 938, among which violation conflicts account for 66.8%. The study shows that the violation rates and the violation behavior at three types of surveyed intersections are markedly different. It is also concluded that the conflict rates and the violation rates are positively correlated. Furthermore, signal violation, traveling in the wrong direction, and overspeeding to cross the intersection are the most dangerous among traffic violation behaviors.

改进后Ray-Box Intersection权系数矩阵的SART＋TVM重建算法

针对均匀采样稀疏型重建问题,研究了Ray-Box Intersection和传统的双线性插值两种权系数矩阵计算方法。对Ray-Box Intersection算法的逻辑漏洞进行了改进,利用直线生成法并结合射线斜率和像素位置关系提出了改进算法。该算法利用代数关系求得射线穿过重建区域的起点和终点,然后取不大于其坐标的最大整数,最后采用直线生成法,依据射线斜率沿X或Y方向得到该条射线在投影区域内经过的所有像素块的左下角坐标集合,对于每个像素块,射线与像素块交点距离即为该像素块对射线的加权值。实验结果表明,相比Ray-Box Intersection权系数矩阵算法,改进后算法速度提高了96%,最大峰值信噪比提高了19%;相比双线性插值算法,改进后算法收敛速度更快,在同样时间代价下最大峰值信噪比提高了5%。改进后的Ray-Box Intersection算法能够获得更好的重建图像质量,细节更清晰。

NSGA-Ⅱ based traffic signal control optimization algorithm for over-saturated intersection group

In order to improve the efficiency of traffic signal control for an over-saturated intersection group, a nondominated sorting genetic algorithm Ⅱ（NSGA-Ⅱ） based traffic signal control optimization algorithm is proposed. The throughput maximum and average queue ratio minimum for the critical route of the intersection group are selected as the optimization objectives of the traffic signal control for the over-saturated condition. The consequences of the efficiency between traffic signal timing plans generated by the proposed algorithm and a commonly utilized signal timing optimization software Synchro are compared in a VISSIM signal control application programming interfaces （SCAPI） simulation environment by using real filed observed traffic data. The simulation results indicate that the signal timing plan generated by the proposed algorithm is more efficient in managing oversaturated flows at intersection groups, and, thus, it has the capability of optimizing signal timing under the over-saturated conditions.

Intersection capacity based on driver's visual characteristics

In order to reflect the influence of the drivers＇ characteristic differences on intersection capacity under a mixed traffic flow, a driver correction coefficient for the intersection capacity calculation according to the driver＇s visual characteristics is proposed. First, the parameters of the driver＇s visual characteristics at some real roads, including gaze fixation distribution, mean fixation duration, visual angle distribution and some other parameters at intersections, are collected. Then, the relationship between the traffic flow rate at intersections and the parameters of driver eye movements are established. The analytical results indicate that when the traffic flow is unsaturated, the parameters of driver eye movements change relatively little; however, when the traffic flow is saturated, the parameters of driver eye movements change drastically. Finally, the saturation-flow-rate model is modified according to the parameters of driver eye movements; thus, a capacity model of intersections considering the driver＇s visual characteristics is obtained.

Multi-phase signal setting and capacity of signalized intersection

A capacity model of multi-phase signalized intersections is derived by a stopping-line method. It is simplified with two normal situations： one situation involves one straight lane and one left-turn lane; the other situation involves two straight lanes and one left-turn lane. The results show that the capacity is mainly relative to signal cycle length, phase length, intersection layout and following time. With regard to the vehicles arrival rates, the optimal model is derived based on each phase＇s remaining time balance, and it is solved by Lagrange multipliers. Therefore, the calculation models of the optimal signal cycle length and phase lengths are derived and simplified. Compared to the existing models, the proposed model is more convenient and practical. Finally, a practical intersection is chosen and its signal cycles and phase lengths are calculated by the proposed model.

Method for pedestrian signal timing at signalized intersections

The pedestrian timing at signalized intersections is studied aiming at the problems of the inconsistency of the vehicular and pedestrian timing requirements and the insufficiency of pedestrian clearance. Based on the formulae of WALK and flashing DON＇T WALK （FDW） in the highway capacity manual （HCM）, the relationship between pedestrian signal indications and vehicular signal indications is discussed using the theory of traffic flow. Then, methods of pedestrian timing for different cases are established, particularly the methods of the pedestrian green adjustment. Ways of pedestrian crossing are analyzed for roadways with different forms and widths of the median island. The sampling values of calculation parameters are studied, and the recommended formulae of pedestrian timing for different conditions are presented.

An intersection method for locating earthquakes in complex velocity models

The intersection method is one of the basic approaches for locating earthquakes and is not only robust but also efficient. However, its location accuracy is not high, especially for focal depth because the velocity model used for the conventional intersection method is based on homogeneous or laterally homogeneous media, which is too simple. In order to improve the accuracy, we have modified the existing intersection method. In the modified approach, the earthquake loci are not assumed to be circular or hyperbolic and calculation accuracy is improved using a minimum traveltime tree algorithm for tracing rays. The numerical model shows that the modified method can locate earthquakes in complex velocity models.

基于9-Intersection模型的模糊空间对象间的拓扑关系研究

本文将从地理认知的角度上分析并选择一个适合于在GIS中应用9-Intersection模型的模糊空间对象的边界定义,并构建一个能够采用9-Intersection模型精确判断模糊空间对象之间拓扑关系的模糊拓扑空间(CITfts),并进行相应的证明,最后建立简单模糊区域,采用empty/no-empty算子给出模糊空间对象之间的拓扑关系的表达形式。