Properties of Dispersion Casting of Y2O3 Particles in Hypo,Hyper and Eutectic Binary Al-Cu Alloys

In the present work,the dispersion casting of Y-2O-3 particles in aluminum-copper alloy was investigated in terms of microstructural changes with respect to Cu contents of 20 （hypo）,33 （eutectic） and 40 （hyper） wt pct by scanning electron microscopy （SEM） and energy dispersive spectroscopy （EDS）.For the fabrication of Al-Cu alloy dispersed Y-2O-3 ceramic particles,stir casting method was employed.In case of Al-20 wt pct Cu alloy （hypoeutectic）,SEM images revealed that primary Al was grown up in the beginning.After that,eutectic phase with well dispersed ceramic particles was formed.In case of eutectic composition,Y-2O-3 particles were uniformly dispersed in the matrix.When the Cu is added into Al up to 40 wt pct （hypereutectic）,primary phase was grown up without any Y-2O-3 ceramic particles in the early stage of solidification.Thereafter, eutectic phase was formed with well dispersed ceramic particles.It can be concluded that Y-2O-3 ceramic particles is mostly dispersed in case of eutectic composition in Al-Cu alloy.

Crystalline phase of Y_2O_3 :Eu particles generated in a substrate-free flame process

In this study, factors affecting the crystal structure of flame-synthesized Y2O3 ：Eu particles were investigated, especially the particle size effect and its interaction with Eu doping concentration, Polydisperse Y2O3：Eu （size range 200 nm to 3μm） powder samples with Eu doping concentrations from 2,5 mol% to 25 mol% were generated in either H2/air or H2/O2 substrate-free flames. The crystal structure of the powder samples was determined by powder X-ray diffraction （XRD）, which was complemented by pho- toluminescence （PL） measurements. Single particle crystal structure was determined by single particle selected area electron diffraction （SAED）, and for the first time, by electron backscatter diffraction （EBSD）. H2/air flames resulted in cubic phase Y2O3：Eu particles with hollow morphology and irregular shapes, Particles from H2/O2 flames had dense and spherical morphology; samples with lower Eu doping concen- trations had mixed cubic/monoclinic phases; samples with the highest Eu doping concentrations were phase-pure monoclinic. For samples generated from H2/02 flames, a particle size effect and its interaction with Eu doping concentration were found： particles smaller than a critical diameter had the monoclinic phase, and this critical diameter increased with increasing Eu doping concentration, These findings suggest that the formation of monoclinic Y2O3：Eu is inevitable when extremely hot substrate-free flames are used, because typical flame-synthesized Y203 ：Eu particle sizes are well below the critical diameter, However, it may be possible to generate particles with dense, spherical morphology and the desired cubic structure by using a moderately high flame temperature that enables fast sintering without melting the particles.