MnOx-promoted Ni-based catalyst supported by ZnO was developed to selectively hydrogenate glucose into polyols in water at 523 K with a yield of 64.9%. Using glucose, sorbitol, glycerol and LA as the rawmaterials, the...MnOx-promoted Ni-based catalyst supported by ZnO was developed to selectively hydrogenate glucose into polyols in water at 523 K with a yield of 64.9%. Using glucose, sorbitol, glycerol and LA as the rawmaterials, the roles of nickel, ZnO and MnOx were investigated. The results show that nickel provided a new pathway of glucose to sorbitol and played an important role in the hydrogenation of C3 intermediates to 1,2-propanediol(1,2-PDO). The high yield of 1, 2-PDO was attributed to effective C–C bond cleavage performance of ZnO support promoted by MnOx. ZnO and MnOx contribute to the conversion of glycerol to lactic acid(LA) and LA to 1, 2-PDO, respectively. A concise pathway for hydrogenation of glucose over Ni-based catalyst was proposed.展开更多
The effect of ammonia on the catalytic performance for 1-methylnaphthalene(1-MN) selective hydrogenation saturation was studied with Co-Mo/γ-Al_2O_3, Ni-W/γ-Al_2O_3, Ni-Mo/γ-Al_2O_3, and Ni-Mo-W/γ-Al_2O_3 catalyst...The effect of ammonia on the catalytic performance for 1-methylnaphthalene(1-MN) selective hydrogenation saturation was studied with Co-Mo/γ-Al_2O_3, Ni-W/γ-Al_2O_3, Ni-Mo/γ-Al_2O_3, and Ni-Mo-W/γ-Al_2O_3 catalysts. The results indicated that Ni-Mo-W/γ-Al_2O_3 catalyst exhibited the best performance for saturation of 1-MN. The introduction of NH3 remarkably inhibited the hydrogenation of 1-MN in the dynamic control area, but it had no effect in the thermodynamic control area. Besides, the mono-aromatics selectivity on the Ni-Mo-W and Ni-Mo catalysts was enhanced. However, it had little effect on the Ni-W and Co-Mo catalysts.展开更多
介绍了YN-1型镍系催化剂在新疆独山子天利实业总公司裂解汽油C+9馏分选择加氢装置的工业应用。结果表明,YN-1型镍系催化剂用于胶质含量>100 mg·(100m L)-1和溴价>95 g Br·(100g)-1的C+9馏分原料选择加氢,能够适应超过9...介绍了YN-1型镍系催化剂在新疆独山子天利实业总公司裂解汽油C+9馏分选择加氢装置的工业应用。结果表明,YN-1型镍系催化剂用于胶质含量>100 mg·(100m L)-1和溴价>95 g Br·(100g)-1的C+9馏分原料选择加氢,能够适应超过90℃的反应温升,并表现出低温活性高、稳定性好和容胶量大的优点。展开更多
The transition metals （Cu, Co, and Fe） were applied to modify Ni/Ce0.2Zr0.1Al0.7Oδ catalyst. The effects of transition metals on the catalytic properties of Ni/Ce0.2Zr0.1Al0.7Oδ autothermal reforming of methane we...The transition metals （Cu, Co, and Fe） were applied to modify Ni/Ce0.2Zr0.1Al0.7Oδ catalyst. The effects of transition metals on the catalytic properties of Ni/Ce0.2Zr0.1Al0.7Oδ autothermal reforming of methane were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS. Tests in autothermal reforming of methane to hydrogen showed that the addition of transition metals （Cu and Co） significantly increased the activity of catalyst under the conditions of lower reaction temperature, and Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ was found to have the highest conversion of CH4 among all catalysts in the operation temperatures ranging from 923 K to 1023 K. TPR, XRD and XPS measurements indicated that the cubic phases of CexZr1-xO2 solid solution were formed in the preparation process of catalysts. Strong interaction was found to exist between NiO and CexZr1-xO2 solid solution. The addition of Cu improved the dispersion of NiO, inhibited the formation of NiAl2O4, and thus significantly promoted the activity of the catalyst Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ展开更多
Autothermal steam reforming （ATR） of bio-oil, which couples the endothermic steam reform- ing reaction with the exothermic partial oxidation, offers many advantages from a technical and economic point of view. Effec...Autothermal steam reforming （ATR） of bio-oil, which couples the endothermic steam reform- ing reaction with the exothermic partial oxidation, offers many advantages from a technical and economic point of view. Effective production of hydrogen through ATR of bio-oil was performed at lower temperature with NiCuZnAl catalyst. The highest hydrogen yield from bio-oil reached 64.3% with a nearly complete bio-oil conversion at 600℃, the ratio of steam to carbon fed （S/C） of 3 and the oxygen to carbon ratio （O/C） of 0.34. The reaction conditions in ATR including temperature, O/C, S/C and weight hourly space velocity can be used to control both hydrogen yield and products distribution. The comparison between the ATR and common steam reforming of bio-oil was studied. The mechanism of the ATR of bio-oil was also discussed.展开更多
基金financially supported by the National Science Foundation of China (21671132)Shanghai Science and Technology Committee(16dz1207200)the Youth Innovation Promotion Association CAS(2015231)
文摘MnOx-promoted Ni-based catalyst supported by ZnO was developed to selectively hydrogenate glucose into polyols in water at 523 K with a yield of 64.9%. Using glucose, sorbitol, glycerol and LA as the rawmaterials, the roles of nickel, ZnO and MnOx were investigated. The results show that nickel provided a new pathway of glucose to sorbitol and played an important role in the hydrogenation of C3 intermediates to 1,2-propanediol(1,2-PDO). The high yield of 1, 2-PDO was attributed to effective C–C bond cleavage performance of ZnO support promoted by MnOx. ZnO and MnOx contribute to the conversion of glycerol to lactic acid(LA) and LA to 1, 2-PDO, respectively. A concise pathway for hydrogenation of glucose over Ni-based catalyst was proposed.
文摘The effect of ammonia on the catalytic performance for 1-methylnaphthalene(1-MN) selective hydrogenation saturation was studied with Co-Mo/γ-Al_2O_3, Ni-W/γ-Al_2O_3, Ni-Mo/γ-Al_2O_3, and Ni-Mo-W/γ-Al_2O_3 catalysts. The results indicated that Ni-Mo-W/γ-Al_2O_3 catalyst exhibited the best performance for saturation of 1-MN. The introduction of NH3 remarkably inhibited the hydrogenation of 1-MN in the dynamic control area, but it had no effect in the thermodynamic control area. Besides, the mono-aromatics selectivity on the Ni-Mo-W and Ni-Mo catalysts was enhanced. However, it had little effect on the Ni-W and Co-Mo catalysts.
文摘介绍了YN-1型镍系催化剂在新疆独山子天利实业总公司裂解汽油C+9馏分选择加氢装置的工业应用。结果表明,YN-1型镍系催化剂用于胶质含量>100 mg·(100m L)-1和溴价>95 g Br·(100g)-1的C+9馏分原料选择加氢,能够适应超过90℃的反应温升,并表现出低温活性高、稳定性好和容胶量大的优点。
基金This work was supported by Guangdong Natural Science Foundation of China (030514)Science and Technology Programs of Guangdong Province of China (2004B33401006)
文摘The transition metals （Cu, Co, and Fe） were applied to modify Ni/Ce0.2Zr0.1Al0.7Oδ catalyst. The effects of transition metals on the catalytic properties of Ni/Ce0.2Zr0.1Al0.7Oδ autothermal reforming of methane were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS. Tests in autothermal reforming of methane to hydrogen showed that the addition of transition metals （Cu and Co） significantly increased the activity of catalyst under the conditions of lower reaction temperature, and Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ was found to have the highest conversion of CH4 among all catalysts in the operation temperatures ranging from 923 K to 1023 K. TPR, XRD and XPS measurements indicated that the cubic phases of CexZr1-xO2 solid solution were formed in the preparation process of catalysts. Strong interaction was found to exist between NiO and CexZr1-xO2 solid solution. The addition of Cu improved the dispersion of NiO, inhibited the formation of NiAl2O4, and thus significantly promoted the activity of the catalyst Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ
文摘Autothermal steam reforming （ATR） of bio-oil, which couples the endothermic steam reform- ing reaction with the exothermic partial oxidation, offers many advantages from a technical and economic point of view. Effective production of hydrogen through ATR of bio-oil was performed at lower temperature with NiCuZnAl catalyst. The highest hydrogen yield from bio-oil reached 64.3% with a nearly complete bio-oil conversion at 600℃, the ratio of steam to carbon fed （S/C） of 3 and the oxygen to carbon ratio （O/C） of 0.34. The reaction conditions in ATR including temperature, O/C, S/C and weight hourly space velocity can be used to control both hydrogen yield and products distribution. The comparison between the ATR and common steam reforming of bio-oil was studied. The mechanism of the ATR of bio-oil was also discussed.
