Controllable thermal rectification design for buildings based on phase change composites

Phase-change material(PCM)is widely used in thermal management due to their unique thermal behavior.However,related research in thermal rectifier is mainly focused on exploring the principles at the fundamental device level,which results in a gap to real applications.Here,we propose a controllable thermal rectification design towards building applications through the direct adhesion of composite thermal rectification material(TRM)based on PCM and reduced graphene oxide(rGO)aerogel to ordinary concrete walls(CWs).The design is evaluated in detail by combining experiments and finite element analysis.It is found that,TRM can regulate the temperature difference on both sides of the TRM/CWs system by thermal rectification.The difference in two directions reaches to 13.8 K at the heat flow of 80 W/m^(2).In addition,the larger the change of thermal conductivity before and after phase change of TRM is,the more effective it is for regulating temperature difference in two directions.The stated technology has a wide range of applications for the thermal energy control in buildings with specific temperature requirements.

Enhancement of thermal rectification by asymmetry engineering of thermal conductivity and geometric structure for multi-segment thermal rectifier

Thermal rectification is an exotic thermal transport phenomenon,an analog to electrical rectification,in which heat flux along one direction is larger than that in the other direction and is of significant interest in electronic device applications.However,achieving high thermal rectification efficiency or rectification ratio is still a scientific challenge.In this work,we performed a systematic simulation of thermal rectification by considering both efforts of thermal conductivity asymmetry and geometrical asymmetry in a multi-segment thermal rectifier.It is found that the high asymmetry of thermal conductivity and the asymmetry of the geometric structure of multi-segment thermal rectifiers can significantly enhance the thermal rectification,and the combination of both thermal conductivity asymmetry and geometrical asymmetry can further improve thermal rectification efficiency.This work suggests a possible way for improving thermal rectification devices by asymmetry engineering.

Thermal rectification induced by Wenzel–Cassie wetting state transition on nano-structured solid–liquid interfaces

Thermal rectification refers to the phenomenon by which the magnitude of the heat flux in one direction is much larger than that in the opposite direction.In this study,we propose to implement the thermal rectification phenomenon in an asymmetric solid–liquid–solid sandwiched system with a nano-structured interface.By using the non-equilibrium molecular dynamics simulations,the thermal transport through the solid–liquid–solid system is examined,and the thermal rectification phenomenon can be observed.It is revealed that the thermal rectification effect can be attributed to the significant difference in the interfacial thermal resistance between Cassie and Wenzel states when reversing the temperature bias.In addition,effects of the liquid density,solid–liquid bonding strength and nanostructure size on the thermal rectification are examined.The findings may provide a new way for designs of certain thermal devices.

Nonlinear optical rectification of GaAs/Ga_(1-x)Al_(x)As quantum dots with Hulthén plus Hellmann confining potential

We investigate the nonlinear optical rectification(NOR) of spherical quantum dots(QDs) under Hulthén plus Hellmann confining potential with the external tuning elements. Energy and wavefunction are determined by using the Nikiforov–Uvarov method. Expression for the NOR coefficient is derived by the density matrix theory. The results show that the applied external elements and internal parameters of this system have a strong influence on intraband nonlinear optical properties. It is hopeful that this tuning of the nonlinear optical properties of GaAs/Ga_(1-x)Al_(x)As QDs can make a greater contribution to preparation of new functional optical devices.

Bidirectional rectifier with gate voltage control based on Bi_(2)O_(2)Se/WSe_(2)heterojunction

Two-dimensional(2D)WSe_(2)has received increasing attention due to its unique optical properties and bipolar behavior.Several WSe_(2)-based heterojunctions exhibit bidirectional rectification characteristics,but most devices have a lower rectification ratio.In this work,the Bi_(2)O_(2)Se/WSe_(2)heterojunction prepared by us has a typeⅡband alignment,which can vastly suppress the channel current through the interface barrier so that the Bi_(2)O_(2)Se/WSe_(2)heterojunction device has a large rectification ratio of about 10^(5).Meanwhile,under different gate voltage modulation,the current on/off ratio of the device changes by nearly five orders of magnitude,and the maximum current on/off ratio is expected to be achieved 106.The photocurrent measurement reveals the behavior of recombination and space charge confinement,further verifying the bidirectional rectification behavior of heterojunctions,and it also exhibits excellent performance in light response.In the future,Bi_(2)O_(2)Se/WSe_(2)heterojunction field-effect transistors have great potential to reduce the volume of integrated circuits as a bidirectional controlled switching device.

Application of Secondary Logging Interpretation—Taking Yan 9 Reservoir in X Area as an Example

Logging data and its interpretation results are one of the most important basic data for understanding reservoirs and oilfield development. Standardized and unified logging interpretation results play a decisive role in fine reservoir description and reservoir development. Aiming at the problem of the conflict between the development effect and the initial interpretation result of Yan 9 reservoir in Hujianshan area of Ordos Basin, by combining the current well production performance, logging, oil test, production test and other data, on the basis of making full use of core, coring, logging, thin section analysis and high pressure mercury injection data, the four characteristics of reservoir are analyzed, a more scientific and reasonable calculation model of reservoir logging parameters is established, and the reserves are recalculated after the second interpretation standard of logging is determined. The research improves the accuracy of logging interpretation and provides an effective basis for subsequent production development and potential horizons.

Polaron effect on the optical rectification in spherical quantum dots with electric field

The polaron effect on the optical rectification in spherical quantum dots with a shallow hydrogenic impurity in the presence of electric field is theoretically investigated by taking into account the interactions of the electrons with both confined and surface optical phonons. Besides, the interaction between impurity and phonons is also considered. Numerical calculations are presented for typical Zn1-xCdxSe/ZnSe material. It is found that the polaronic effect or electric field leads to the redshifted resonant peaks of the optical rectification coefficients. It is also found that the peak values of the optical rectification coefficients with the polaronic effect are larger than without the polaronic effect, especially for smaller Cd concentrations or stronger electric field.

Impact of GCP distribution on the rectification accuracy of Landsat TM imagery in a coastal zone

The purpose is to explore the effect of the spatial distribution of ground control points （GCPs） on the accuracy of imagery rectification. Both area-distributed and linearly distributed GCPs were used to rectify a Landsat TM image of a coastal zone. Rectification accuracy was checked against 99 independent points over the intertidal mudflats with no ground control. Results indicate that the root-mean-square error of residuals over these areas is several times larger than its GCPs-measured counterpart. If the GCPs are spatially dispersed over an area, residuals fluctuate but increase steadily with distance to the source of control in easting （R^2= 0. 827）. in northing they fluctuate around 150 m until 15 km, beyond which they rise steadily at a small range of fluctuation. These residuals are less predictable from distance to the source of control than in easting （R^2= 0.517 ）. If the GCPs are distributed along a control line, residuals rise with distance to it linearly and predictably （R^2 = 0. 877） in the direction perpendicular to it. In a direction parallel to it, the distance has little impact on rectification residuals.

NEW VERSATILE CAMERA CALIBRATION TECHNIQUE BASED ON LINEAR RECTIFICATION

A new versatile camera calibration technique for machine vision usingoff-the-shelf cameras is described. Aimed at the large distortion of the off-the-shelf cameras, anew camera distortion rectification technology based on line-rectification is proposed. Afull-camera-distortion model is introduced and a linear algorithm is provided to obtain thesolution. After the camera rectification intrinsic and extrinsic parameters are obtained based onthe relationship between the homograph and absolute conic. This technology needs neither ahigh-accuracy three-dimensional calibration block, nor a complicated translation or rotationplatform. Both simulations and experiments show that this method is effective and robust.

The First Principle Study on the Rectification of Molecular Junctions Based on the Alkyl-chain-modified Phenyl Benzothiophene Derivative

Using density functional theory（DFT） combined with nonequilibrium Green＇s function investigates the electron-transport properties of several molecular junctions based on the PBTDT-CH=NH molecule, which is modified by one to four alkyl groups forming PBTDT-（CH2）nCH=NH. The electronic structures of the isolated molecules（thiol-ended PBTDT-（CH2）nCH=N） have been investigated before the electron-transport calculations are performed. The asymmetric current-voltage characteristics have been obtained for the molecular junctions. Rectifying performance of Au/S-PBTDT-CH=N-S/Au molecular junction can be regulated by introducing alkyl chain. The N3 molecular junction exhibits the best rectifying effect. Its maximum rectifying ratio is 878, which is 80 times more than that of the molecular junction based on the original N molecular junction. The current-voltage（I-V） curves of all the sandwich systems in this work are illustrated by transmission spectra and molecular projection density analysis.

Rectification of magnetic force tracker using neural network inaugmented reality system

Nonlinear errors always exist in data obtained from tracker in augmented reality （AR）, which badly influence the effect of AR. This paper proposes to rectify the errors using BP neural network. As BP neural network is prone to getting into local extrema and convergence is slow, genetic algorithm is employed to optimize the initial weights and threshold of neural network. This paper discusses how to set the crucial parameters in the algorithm. Experimental results show that the method ensures that the neural network achieves global convergence quickly and correctly. Tracking precision of AR system is improved after the tracker is rectified, and the third dimension of AR system is enhanced.

Effect of proportion on rectification in organic co-oligomer spin rectifiers

The rectification behaviours in organic magnetic/nonmagnetic co-oligomer spin rectifiers are investigated theoretically. It is found that both the charge current and the spin current through the device are rectified at the same time. By adjusting the proportion between the magnetic and nonmagnetic components, the threshold voltage and the rectification ratio of the rectifier are modulated. A large rectification ratio is obtained when the two components are equal in length. The intrinsic mechanism is analysed in terms of the asymmetric localization of molecular orbitals under biases. The effect of molecular length on the rectification is also discussed. These results will be helpful in the future design of organic spin diodes.

Rectification and electroluminescence of nanostructured GaN/Si heterojunction based on silicon nanoporous pillar array

A GaN/Si nanoheterojunction is prepared through growing Ga N nanocrystallites（nc-GaN） on a silicon nanoporous pillar array（Si-NPA） by a chemical vapor deposition（CVD） technique at a relatively low temperature. The average size of nc-Ga N is determined to be ~10 nm. The spectral measurements disclose that the photoluminescence（PL） from GaN/SiNPA is composed of an ultraviolet（UV） band and a broad band spanned from UV to red region, with the feature that the latter band is similar to that of electroluminescence（EL）. The electron transition from the energy levels of conduction band and, or, shallow donors to that of deep acceptors of Ga N is indicated to be responsible for both the broad-band PL and the EL luminescence. A study of the I-V characteristic shows that at a low forward bias, the current across the heterojunction is contact-limited while at a high forward bias it is bulk-limited, which follows the thermionic emission model and space-charge-limited current（SCLC） model, respectively. The bandgap offset analysis indicates that the carrier transport is dominated by electron injection from n-GaN into the p-Si-NPA, and the EL starts to appear only when holes begin to be injected from Si-NPA into GaN with biases higher than a threshold voltage.

First Principle Study on the Rectification of Molecular Junctions Based on the Thiol-ended Oligosilane

The electron transport properties of various molecular junctions based on the thiol-ended oligosilane are investigated through density functional theory combined with non-equilibrium Green＇s function formalism. Our calculations show that oligosilanes doped by the phenyl and -C10H6 groups demonstrate better rectifying effect and their rectification ratios are up to 15.41 and 65.13 for their molecular junctions. The current-voltage （I-V） curves of all the Au/ modified oligosilane/Au systems in this work are illustrated by frontier molecular orbitals, transmission spectra and density of states under zero bias. And their rectifying behaviors are analyzed through transmission spectra.

Relationship between rectification moment and angle of shield based on numerical simulation

The finite element method is used to simulate the rectification process of shield machine, to study the relationship between rectification moment and angle and to explore the influence laws of different soil parameters and buried depth on rectification moment. It is hoped that the reference value of rectification moment can be offered to operator, and theoretical foundation can be laid for future automatic rectification technology. The results show that the rectification moment and angle generally exhibit good linear behavior in clay layers with different soil parameters or buried depths, and then the concept of rectification coefficient, that is, the ratio of rectification angle to rectification moment, is proposed; different soil parameters and buried depths have different influences on rectification coefficient, in which elastic modulus has great influence but others have little influences; the simulations of rectification process are preformed in clay layers with different elastic modulus, and fitting results show that elastic modulus and rectification coefficient present the quadratic function relation.

Nonlinear Optical Rectification, Second and Third Harmonic Generations in Square-Step and Graded-Step Quantum Wells under Intense Laser Field

For square-step quantum wells(SSQWs) and graded-step quantum wells(GSQWs), the nonlinear optical rectification(NOR), second harmonic generation(SHG) and third harmonic generation(THG) coefficients under an intense laser field(ILF) are analyzed. The found results indicate that ILF can ensure a vital influence on the shape and height of the confined potential profile of both SSQWs and GSQWs, and alterations of the dipole moment matrix elements and the energy levels are adhered on the profile of the confined potential. According to the results, the potential profile and height of the GSQWs are affected more significantly by ILF intensity compared to SSQWs. These results indicate that NOR, SHG and THG coefficients of SSQWs and GSQWs may be calibrated in a preferred energy range and the magnitude of the resonance peak(RP) by tuning the ILF parameter. It is feasible to classify blue or red shifts in RP locations of NOR, SHG and THG coefficients by varying the ILF parameter. Our results can be useful in investigating new ways of manipulating the opto-electronic properties of semiconductor QW devices.

Sliding mode robust controller for automatic rectification of shield machine

According to the actual engineering problem that the precise load model of shield machine is difficult to achieve,a design method of sliding mode robust controller oriented to the automatic rectification of shield machine was proposed. Firstly,the nominal load model of shield machine and the ranges of model parameters were obtained by the soil mechanics parameters of certain geological conditions and the messages of the self-learning of shield machine by tunneling for previous segments. Based on this rectification mechanism model with known ranges of parameters,a sliding mode robust controller was proposed. Finally,the simulation analysis was developed to verify the effectiveness of the proposed controller. The simulation results show that the sliding mode robust controller can be implemented in the attitude rectification process of the shield machine and it has stronger robustness to overcome the soil disturbance.

A simple rectification method for linear multi-baseline stereovision system

The linear multi-baseline stereo system introduced by the CMU-RI group has been proven to be a very effective and robust stereovision system. However, most traditional stereo rectification algorithms are all designed for binocular stereovision system, and so, cannot be applied to a linear multi-baseline system. This paper presents a simple and intuitional method that can simultaneously rectify all the cameras in a linear multi-baseline system. Instead of using the general 8-parameter homography transform, a two-step virtual rotation method is applied for rectification, which results in a more specific transform that has only 3 parameters, and more stability. Experimental results for real stereo images showed the presented method is efficient.

Reversal of thermal rectification in one-dimensional nonlinear composite system

Using nonequilibrium molecular dynamics simulations, a comprehensive study of the asymmetric heat conduction in the composite system consisting of the Frenkel-Kontorova （FK） model and Fermi-Pasta-Ulam （FPU） model is conducted. The calculated results show that in a larger system, the rectifying direction can be reversed only by adjusting the thermal bias. Moreover, the rectification reversal depends critically on the system size and the properties of the interface. The mechanisms of the two types of asymmetric heat conduction induced by nonlinearity are discussed. Considering the novel asymmetric heat conduction in the system, it may possess possible applications to manage the thermal rectification in situ directionally without re-building the structure.

Improved Mixed Integer Optimization Approach for Data Rectification with Gross Error Candidates

Mixed integer linear programming(MILP) approach for simultaneous gross error detection and data reconciliation has been proved as an efficient way to adjust process data with material,energy,and other balance constrains.But the efficiency will decrease significantly when this method is applied in a large-scale problem because there are too many binary variables involved.In this article,an improved method is proposed in order to generate gross error candidates with reliability factors before data rectification.Candidates are used in the MILP objective function to improve the efficiency and accuracy by reducing the number of binary variables and giving accurate weights for suspected gross errors candidates.Performance of this improved method is compared and discussed by applying the algorithm in a widely used industrial example.