Yb：YAG nanopowders were synthesized by the alcohol-water co-precipitatlon method adding MgO as sintering additives. Appropriate amount of MgO adding can restrict the agglomeration and reduce the particle size of Yb：...Yb：YAG nanopowders were synthesized by the alcohol-water co-precipitatlon method adding MgO as sintering additives. Appropriate amount of MgO adding can restrict the agglomeration and reduce the particle size of Yb：YAG powders. When the MgO content was 0.04wt%, well-dispersed Yb：YAG powders with ellipsoidal particles of less than 100 nm diameter were obtained. The experimental results showed the valence variation of doping ion Yb〉 would not appear when adding MgO as sintering additives, so ceramics showed colorless transparent instead of green due to Yb^2＋ color center using traditional SiO2 as additives. The transmission of the sintered Yb：YAG ceramics can reach 80.6% even without annealing. Ceramic morphology showed that the grains had uniform-distribution with the size of 10 iam or so, and no impurity and pore existed in the grain boundary and crystalline while using optimal sintering conditions.展开更多
YAG phosphor doped with Yb (3+) for transparent ceramics was prepared by the co-precipitation method with urea used as precipitant. DTA-TG,XRD,SEM and IR spectrum analyzers were used to investigate the structure and m...YAG phosphor doped with Yb (3+) for transparent ceramics was prepared by the co-precipitation method with urea used as precipitant. DTA-TG,XRD,SEM and IR spectrum analyzers were used to investigate the structure and morphology of the precursor and the sintered poly-crystal. The results indicates that the weight loss is about 40% as the powder calcined at 1200 ℃,and well-crystallized YAG powder is obtained with particle size in the range of 100～150 nm. The SEM analysis of the fracture surface of the sintered body shows that the grain size is about 1～2 μm and the pore volume is very low. The ceramics body with favorite optical properties is obtained by sintering at 1700 ℃.展开更多
Transparent Yb doped YAG, YSAG and YaLaO3 ceramics are fabricated by using the co-precipitation method. The spectral properties and thermal parameters of these Yb doped cubic phase transparent ceramics are compared, a...Transparent Yb doped YAG, YSAG and YaLaO3 ceramics are fabricated by using the co-precipitation method. The spectral properties and thermal parameters of these Yb doped cubic phase transparent ceramics are compared, and their different and potential applications are also analysed. The absorption cross-section and the emission cross-section of these ceramics are measured and calculated. The essential properties of these materials especially for the rep-rated pulsed high-energy diode-pumped solid-state lasers are investigated. The results show that Yb doped YAG, YSAG and YaLaO3 are all suitable materials used for diode-pumped solid-state lasers.展开更多
基金Funded by the National Natural Science Foundation of China(Nos.50872083,51002098and11145006)the Doctoral Program of Higher Education(No.20090181120092)the National High Technology Research and Development Program(863)(JG2011094)
文摘Yb：YAG nanopowders were synthesized by the alcohol-water co-precipitatlon method adding MgO as sintering additives. Appropriate amount of MgO adding can restrict the agglomeration and reduce the particle size of Yb：YAG powders. When the MgO content was 0.04wt%, well-dispersed Yb：YAG powders with ellipsoidal particles of less than 100 nm diameter were obtained. The experimental results showed the valence variation of doping ion Yb〉 would not appear when adding MgO as sintering additives, so ceramics showed colorless transparent instead of green due to Yb^2＋ color center using traditional SiO2 as additives. The transmission of the sintered Yb：YAG ceramics can reach 80.6% even without annealing. Ceramic morphology showed that the grains had uniform-distribution with the size of 10 iam or so, and no impurity and pore existed in the grain boundary and crystalline while using optimal sintering conditions.
文摘YAG phosphor doped with Yb (3+) for transparent ceramics was prepared by the co-precipitation method with urea used as precipitant. DTA-TG,XRD,SEM and IR spectrum analyzers were used to investigate the structure and morphology of the precursor and the sintered poly-crystal. The results indicates that the weight loss is about 40% as the powder calcined at 1200 ℃,and well-crystallized YAG powder is obtained with particle size in the range of 100～150 nm. The SEM analysis of the fracture surface of the sintered body shows that the grain size is about 1～2 μm and the pore volume is very low. The ceramics body with favorite optical properties is obtained by sintering at 1700 ℃.
基金supported by National Science Foundation for Post-doctoral Scientists of China (Grant No 20070420677)Applied Basic Research Program of Sciences and Technology Commission Foundation of Shanghai,China (Grant No 06DZ11417)High Technology Research and Development Program of China (Grant No 2007AA03Z523)
文摘Transparent Yb doped YAG, YSAG and YaLaO3 ceramics are fabricated by using the co-precipitation method. The spectral properties and thermal parameters of these Yb doped cubic phase transparent ceramics are compared, and their different and potential applications are also analysed. The absorption cross-section and the emission cross-section of these ceramics are measured and calculated. The essential properties of these materials especially for the rep-rated pulsed high-energy diode-pumped solid-state lasers are investigated. The results show that Yb doped YAG, YSAG and YaLaO3 are all suitable materials used for diode-pumped solid-state lasers.
