The cardiovascular diseases(CVD)continue to be the major threat to global public health over the years,while one of the effective methods to treat CVD is stent intervention.Biomedical magnesium(Mg)alloys have great po...The cardiovascular diseases(CVD)continue to be the major threat to global public health over the years,while one of the effective methods to treat CVD is stent intervention.Biomedical magnesium(Mg)alloys have great potential applications in cardiovascular stents benefit from their excellent biodegradability and absorbability.However,excessive degradation rate and the delayed surface endothelialization still limit their further application.In this study,we modified a Mg-Zn-Y-Nd alloy(ZE21B)by preparing MgF_(2) as the corrosion resistance layer,the dopamine polymer film(PDA)as the bonding layer,and hyaluronic acid(HA)loaded astaxanthin(ASTA)as an important layer to directing the cardiovascular cells fate.The electrochemical test results showed that the MgF_(2)/PDA/HA-ASTA coating improved the corrosion resistance of ZE21B.The cytocompatibility experiments also demonstrated that this novel composite coating also selectively promoted endothelial cells proliferation,inhibited hyperproliferation of smooth muscle cells and adhesion of macrophages.Compared with the HAloaded rapamycin(RAPA)coating,our MgF_(2)/PDA/HA-ASTA coating showed better blood compatibility and cytocompatibility,indicating stronger multi-functions for the ZE21B alloy on cardiovascular application.展开更多
新型制冷剂R1234ze(E)(trans-1,3,3,3-tetrafluoropropene)因较低的GWP而被广泛关注,有望在热泵中作为R134a的替代品。本文对R1234ze(E)在内径为8 mm水平管内流动沸腾过程中摩擦压降特性进行实验研究,并在相同实验工况下与R134a进行对...新型制冷剂R1234ze(E)(trans-1,3,3,3-tetrafluoropropene)因较低的GWP而被广泛关注,有望在热泵中作为R134a的替代品。本文对R1234ze(E)在内径为8 mm水平管内流动沸腾过程中摩擦压降特性进行实验研究,并在相同实验工况下与R134a进行对比。实验研究的流动沸腾换热的饱和温度为10℃,热流密度为5.0 k W/m^2和10.0 k W/m^2,质流密度范围为300~500 kg/(m^2·s),并分析质流密度、热流密度对R1234ze(E)和R134a饱和流动沸腾过程中摩擦压降的影响。结果表明,在相同工况下R1234ze(E)的流动沸腾过程的摩擦压降略大于R134a,如质流密度为500 kg/(m^2·s)时,R1234ze(E)的平均摩擦压降值比R134a大8.4%左右。最后,将实验结果同四种摩擦压降经验关联式进行比较分析。展开更多
为了解新型环保工质R1234ze(E)微小通道内的冷凝换热及阻力特性,提出采用VOF(volume of fluid)模型对R1234ze(E)和R134a(Tsat=40℃)在水平微细圆管(Dh=1mm)内的冷凝过程进行数值模拟研究,探讨质量流量、干度以及物性对管内冷凝换热和阻...为了解新型环保工质R1234ze(E)微小通道内的冷凝换热及阻力特性,提出采用VOF(volume of fluid)模型对R1234ze(E)和R134a(Tsat=40℃)在水平微细圆管(Dh=1mm)内的冷凝过程进行数值模拟研究,探讨质量流量、干度以及物性对管内冷凝换热和阻力性能的影响。结果表明,R1234ze(E)和R134a的换热系数和压降都随质量流速和干度的增大而增大。相同情况下,R1234ze(E)换热系数小于R134a,但压降大于R134a。R1234ze(E)的液膜厚度平均要比R134a薄15.7%。当气液两相都为湍流,有效热导率对不同工质在水平圆管内的冷凝换热性能有重要影响。R1234ze(E)在管内的液膜分布特性整体上和R134a相似。现有的关联式对R1234ze(E)的压降都存在一定的低估,平均绝对误差都在30%左右。展开更多
Mg-4Zn-1RE-0.5Zr (ZE41) Mg alloy is extensively used in the aerospace and automobile industries.In order to improve the applicability and performance,this alloy was engineered with in-situ Ti B2reinforcement to form T...Mg-4Zn-1RE-0.5Zr (ZE41) Mg alloy is extensively used in the aerospace and automobile industries.In order to improve the applicability and performance,this alloy was engineered with in-situ Ti B2reinforcement to form Ti B2/ZE41 composite.The high temperature deformation behavior and manufacturability of the newly developed Ti B2/ZE41 composite and the parent ZE41 Mg alloy were studied via establishing constitutive modeling of flow stress,deformation activation energy and processing map over a temperature range of 250℃-450℃ and strain rate range of 0.001 s-1-10 s-1.The predicted flow stress behavior of both materials were found to be well consistent with the experimental values.A significant improvement in activation energy was found in Ti B2/ZE41 composite (171.54 k J/mol) as compared to the ZE41 alloy (148.15 k J/mol) due to the dispersed strengthening of in-situ Ti B2particles.The processing maps were developed via dynamic material modeling.A wider workability domain and higher peak efficiency (45%) were observed in Ti B2/ZE41 composite as compared to ZE41 alloy (41%).The Dynamic recrystallization is found to be the dominating deformation mechanism for both materials;however,particle stimulated nucleation was found to be an additional mode of deformation in Ti B2/ZE41 composite.The twinning and stress induced cracks were observed in both the materials at low temperature and high strain rate.A narrow range of instability zone is found in the present Ti B2/ZE41 composite among the existing published literature on Mg based composites.The detailed microstructural characterization was carried out in both workability and instability domains to establish the governing deformation mechanisms.展开更多
基金For financial support,the authors gratefully acknowledge the National Natural Science Foundation of China(U2004164)the National Key Research and Development Program of China(2018YFC1106703)the Key Projects of the Joint Fund of the National Natural Science Foundation of China(U1804251).
文摘The cardiovascular diseases(CVD)continue to be the major threat to global public health over the years,while one of the effective methods to treat CVD is stent intervention.Biomedical magnesium(Mg)alloys have great potential applications in cardiovascular stents benefit from their excellent biodegradability and absorbability.However,excessive degradation rate and the delayed surface endothelialization still limit their further application.In this study,we modified a Mg-Zn-Y-Nd alloy(ZE21B)by preparing MgF_(2) as the corrosion resistance layer,the dopamine polymer film(PDA)as the bonding layer,and hyaluronic acid(HA)loaded astaxanthin(ASTA)as an important layer to directing the cardiovascular cells fate.The electrochemical test results showed that the MgF_(2)/PDA/HA-ASTA coating improved the corrosion resistance of ZE21B.The cytocompatibility experiments also demonstrated that this novel composite coating also selectively promoted endothelial cells proliferation,inhibited hyperproliferation of smooth muscle cells and adhesion of macrophages.Compared with the HAloaded rapamycin(RAPA)coating,our MgF_(2)/PDA/HA-ASTA coating showed better blood compatibility and cytocompatibility,indicating stronger multi-functions for the ZE21B alloy on cardiovascular application.
文摘新型制冷剂R1234ze(E)(trans-1,3,3,3-tetrafluoropropene)因较低的GWP而被广泛关注,有望在热泵中作为R134a的替代品。本文对R1234ze(E)在内径为8 mm水平管内流动沸腾过程中摩擦压降特性进行实验研究,并在相同实验工况下与R134a进行对比。实验研究的流动沸腾换热的饱和温度为10℃,热流密度为5.0 k W/m^2和10.0 k W/m^2,质流密度范围为300~500 kg/(m^2·s),并分析质流密度、热流密度对R1234ze(E)和R134a饱和流动沸腾过程中摩擦压降的影响。结果表明,在相同工况下R1234ze(E)的流动沸腾过程的摩擦压降略大于R134a,如质流密度为500 kg/(m^2·s)时,R1234ze(E)的平均摩擦压降值比R134a大8.4%左右。最后,将实验结果同四种摩擦压降经验关联式进行比较分析。
文摘为了解新型环保工质R1234ze(E)微小通道内的冷凝换热及阻力特性,提出采用VOF(volume of fluid)模型对R1234ze(E)和R134a(Tsat=40℃)在水平微细圆管(Dh=1mm)内的冷凝过程进行数值模拟研究,探讨质量流量、干度以及物性对管内冷凝换热和阻力性能的影响。结果表明,R1234ze(E)和R134a的换热系数和压降都随质量流速和干度的增大而增大。相同情况下,R1234ze(E)换热系数小于R134a,但压降大于R134a。R1234ze(E)的液膜厚度平均要比R134a薄15.7%。当气液两相都为湍流,有效热导率对不同工质在水平圆管内的冷凝换热性能有重要影响。R1234ze(E)在管内的液膜分布特性整体上和R134a相似。现有的关联式对R1234ze(E)的压降都存在一定的低估,平均绝对误差都在30%左右。
基金Department of Science and Technology, India [grant number of DST/TDT/AMT/ 2017/211(G)] (MEE/18–19/412/DSTX/SUSH) for the financial support and FIST grant, Department of Science and Technology, India [grant number SR/FST/ET11–059/2012 (G)] for funding electron microscope facilitya part of Center of Excellence (Co E) in Applied Magnesium Research (A Vertical of Center for Materials and Manufacturing for Futuristic Mobility), IIT Madrasthe Ministry of Human Resource and Development for funding this CoE through grant number–SB20210992MEMHRD008517。
文摘Mg-4Zn-1RE-0.5Zr (ZE41) Mg alloy is extensively used in the aerospace and automobile industries.In order to improve the applicability and performance,this alloy was engineered with in-situ Ti B2reinforcement to form Ti B2/ZE41 composite.The high temperature deformation behavior and manufacturability of the newly developed Ti B2/ZE41 composite and the parent ZE41 Mg alloy were studied via establishing constitutive modeling of flow stress,deformation activation energy and processing map over a temperature range of 250℃-450℃ and strain rate range of 0.001 s-1-10 s-1.The predicted flow stress behavior of both materials were found to be well consistent with the experimental values.A significant improvement in activation energy was found in Ti B2/ZE41 composite (171.54 k J/mol) as compared to the ZE41 alloy (148.15 k J/mol) due to the dispersed strengthening of in-situ Ti B2particles.The processing maps were developed via dynamic material modeling.A wider workability domain and higher peak efficiency (45%) were observed in Ti B2/ZE41 composite as compared to ZE41 alloy (41%).The Dynamic recrystallization is found to be the dominating deformation mechanism for both materials;however,particle stimulated nucleation was found to be an additional mode of deformation in Ti B2/ZE41 composite.The twinning and stress induced cracks were observed in both the materials at low temperature and high strain rate.A narrow range of instability zone is found in the present Ti B2/ZE41 composite among the existing published literature on Mg based composites.The detailed microstructural characterization was carried out in both workability and instability domains to establish the governing deformation mechanisms.
