The cardiovascular diseases(CVD)continue to be the major threat to global public health over the years,while one of the effective methods to treat CVD is stent intervention.Biomedical magnesium(Mg)alloys have great po...The cardiovascular diseases(CVD)continue to be the major threat to global public health over the years,while one of the effective methods to treat CVD is stent intervention.Biomedical magnesium(Mg)alloys have great potential applications in cardiovascular stents benefit from their excellent biodegradability and absorbability.However,excessive degradation rate and the delayed surface endothelialization still limit their further application.In this study,we modified a Mg-Zn-Y-Nd alloy(ZE21B)by preparing MgF_(2) as the corrosion resistance layer,the dopamine polymer film(PDA)as the bonding layer,and hyaluronic acid(HA)loaded astaxanthin(ASTA)as an important layer to directing the cardiovascular cells fate.The electrochemical test results showed that the MgF_(2)/PDA/HA-ASTA coating improved the corrosion resistance of ZE21B.The cytocompatibility experiments also demonstrated that this novel composite coating also selectively promoted endothelial cells proliferation,inhibited hyperproliferation of smooth muscle cells and adhesion of macrophages.Compared with the HAloaded rapamycin(RAPA)coating,our MgF_(2)/PDA/HA-ASTA coating showed better blood compatibility and cytocompatibility,indicating stronger multi-functions for the ZE21B alloy on cardiovascular application.展开更多
为了解新型环保工质R1234ze(E)微小通道内的冷凝换热及阻力特性,提出采用VOF(volume of fluid)模型对R1234ze(E)和R134a(Tsat=40℃)在水平微细圆管(Dh=1mm)内的冷凝过程进行数值模拟研究,探讨质量流量、干度以及物性对管内冷凝换热和阻...为了解新型环保工质R1234ze(E)微小通道内的冷凝换热及阻力特性,提出采用VOF(volume of fluid)模型对R1234ze(E)和R134a(Tsat=40℃)在水平微细圆管(Dh=1mm)内的冷凝过程进行数值模拟研究,探讨质量流量、干度以及物性对管内冷凝换热和阻力性能的影响。结果表明,R1234ze(E)和R134a的换热系数和压降都随质量流速和干度的增大而增大。相同情况下,R1234ze(E)换热系数小于R134a,但压降大于R134a。R1234ze(E)的液膜厚度平均要比R134a薄15.7%。当气液两相都为湍流,有效热导率对不同工质在水平圆管内的冷凝换热性能有重要影响。R1234ze(E)在管内的液膜分布特性整体上和R134a相似。现有的关联式对R1234ze(E)的压降都存在一定的低估,平均绝对误差都在30%左右。展开更多
The magnesium alloy ZE41 encompasses a wide spectrum of applications as a structural material.An extremely high susceptibility to corrosion limits widespread utility of ZE41.In the present study it has been attempted ...The magnesium alloy ZE41 encompasses a wide spectrum of applications as a structural material.An extremely high susceptibility to corrosion limits widespread utility of ZE41.In the present study it has been attempted to understand the corrosion behaviour of ZE41 alloy employing electrochemical techniques like Tafel extrapolation and electrochemical impedance spectroscopy(EIS)in aqueous salt solutions containing mixture of sodium chloride and sodium sulphate over a varying range of electrolyte concentrations and solution temperatures.The morphology of the metal surface has been established by means of scanning electron microscopy(SEM).The results indicate that the rate of corrosion of ZE41 alloy increases with the increase in temperature and ionic concentration of the medium.The results of corrosion rates at varying temperatures have been utilized in the calculation of activation parameters such as activation energy,enthalpy of activation and entropy of activation for the corrosion process.展开更多
Mg-4Zn-1RE-0.5Zr (ZE41) Mg alloy is extensively used in the aerospace and automobile industries.In order to improve the applicability and performance,this alloy was engineered with in-situ Ti B2reinforcement to form T...Mg-4Zn-1RE-0.5Zr (ZE41) Mg alloy is extensively used in the aerospace and automobile industries.In order to improve the applicability and performance,this alloy was engineered with in-situ Ti B2reinforcement to form Ti B2/ZE41 composite.The high temperature deformation behavior and manufacturability of the newly developed Ti B2/ZE41 composite and the parent ZE41 Mg alloy were studied via establishing constitutive modeling of flow stress,deformation activation energy and processing map over a temperature range of 250℃-450℃ and strain rate range of 0.001 s-1-10 s-1.The predicted flow stress behavior of both materials were found to be well consistent with the experimental values.A significant improvement in activation energy was found in Ti B2/ZE41 composite (171.54 k J/mol) as compared to the ZE41 alloy (148.15 k J/mol) due to the dispersed strengthening of in-situ Ti B2particles.The processing maps were developed via dynamic material modeling.A wider workability domain and higher peak efficiency (45%) were observed in Ti B2/ZE41 composite as compared to ZE41 alloy (41%).The Dynamic recrystallization is found to be the dominating deformation mechanism for both materials;however,particle stimulated nucleation was found to be an additional mode of deformation in Ti B2/ZE41 composite.The twinning and stress induced cracks were observed in both the materials at low temperature and high strain rate.A narrow range of instability zone is found in the present Ti B2/ZE41 composite among the existing published literature on Mg based composites.The detailed microstructural characterization was carried out in both workability and instability domains to establish the governing deformation mechanisms.展开更多
Magnesium(Mg)alloys are generally used in light-weight structural applications due to their higher specific strength.However,the usage of these Mg alloys is limited due to their poor formability at room temperature,wh...Magnesium(Mg)alloys are generally used in light-weight structural applications due to their higher specific strength.However,the usage of these Mg alloys is limited due to their poor formability at room temperature,which is attributed to lower count of slip systems associated with the hcp crystal structure.To address these limitations,several new magnesium alloys and also many processing strategies have been developed and reported in the literature.ZE41 Mg is an alloy with significant quantities of zinc(Zn)and rare earth(RE)elements and has emerged as a promising material for aerospace,automotive,electronics,biomedical and many other industries.To make this alloy more competitive and viable,it should possess better mechanical and corrosion properties.Hence,the current paper reviews the effect of bulk mechanical processing on grain refinement,microstructural modification,and corresponding changes in the mechanical behaviour of ZE41Mg alloy.Further,the effect of various surface modification techniques on altering the surface microstructure and surface properties such as wear and corrosion are also briefly summarized and presented.This review also discusses the challenges and the future perspectives in developing high-performing ZE41 Mg alloys.展开更多
Magnesium-based biodegradable metals as cardiovascular stents have shown a lot of excellent performance, which have been used to treat coronary artery diseases. However, the excessive degradation rate, imperfect bioco...Magnesium-based biodegradable metals as cardiovascular stents have shown a lot of excellent performance, which have been used to treat coronary artery diseases. However, the excessive degradation rate, imperfect biocompatibility and delayed re-endothelialization still lead to a considerable challenge for its application. In this work, to overcome these shortcomings, a compound of catalyzing nitric oxide(NO) generation containing copper ions(Cu^(2+)) and hyaluronic acid(HA), an important component of the extracellular matrix, were covalently immobilized on a hydrofluoric acid(HF)-pretreated ZE21B alloy via amination layer for improving its corrosion resistance and endothelialization. Specifically,the Cu^(2+) chelated firmly with a cyclen 1,4,7,10-tetraazacyclododecane-N’, N’’, N’’’, N-tetraacetic acid(DOTA) could form a stability of hybrid coating, avoiding the explosion of Cu^(2+). The chelated Cu^(2+) enabled the catalytic generation of NO and promoted the adhesion and proliferation of endothelial cells(ECs) in vascular micro-environment. In this case, the synergistic effect of NO-generation and endothelial glycocalyx molecules of HA lead to efficient ECs promotion and smooth muscle cells(SMCs) inhibition. Meanwhile, the blood compatibility also had achieved a marked improvement. Moreover, the standard electrochemical measurements indicated that the functionalized ZE21B alloy had better anti-corrosion ability. In a conclusion, the dual-functional coating displays a great potential in the field of biodegradable magnesium-based implantable cardiovascular stents.展开更多
There are two approaches to metaphysics that concern language,the logical and the linguistic. Zeno Vendler,who took the linguistic one,distinguished with transformational techniques between two semantic categories,nam...There are two approaches to metaphysics that concern language,the logical and the linguistic. Zeno Vendler,who took the linguistic one,distinguished with transformational techniques between two semantic categories,namely fact and event,and regarded them as corresponding respectively to a metaphysical category of beings. In doing this he presupposed that independent semantic categories could be sorted out,and corresponding categories of beings that are independent of language can be derived. But our analysis of Vendler's case shows that it is not semantic categories but grammar that functions in differentiating event and fact. At least some semantic categories could not be separated from grammar,and this casts doubt on the linguistic approach to metaphysics. If semantic categories are not independent of grammar,we could not derive metaphysics from linguistic study.展开更多
Due to its excellent biocompatibility and biodegradability,Mg and its alloys are considered to be promising materials for manufacturing of vascular sent.However,the manufacture of high-precision and high-performance M...Due to its excellent biocompatibility and biodegradability,Mg and its alloys are considered to be promising materials for manufacturing of vascular sent.However,the manufacture of high-precision and high-performance Mg alloys minitubes is still a worldwide problem with a long manufacturing processing caused by the poor workability of Mg alloys.To solve this problem,the cyclic extrusion compression(CEC)was used to pretreat the billet by improving the workability of Mg alloys,finally shortening the manufacturing process.After CEC treatment,the size of grains and second phase particles of Mg alloys were dramatically refined to 3.2μm and 0.3μm,respectively.Only after three passes of cold drawing,the wall thickness of minitube was reduced from 0.200 mm to 0.135 mm and a length was more than 1000 mm.The error of wall thickness was measured to be less than 0.01 mm,implying a high dimensional accuracy.The yield strength(YS),ultimate tensile strength(UTS)and elongation of finished minitube were 220±10 MPa,290±10 MPa and 22.0±0.5%,respectively.In addition,annealing can improve mechanical property and corrosion resistance of minitubes by improving the homogeneity of the microstructure and enhancing the density of basal texture.展开更多
基金For financial support,the authors gratefully acknowledge the National Natural Science Foundation of China(U2004164)the National Key Research and Development Program of China(2018YFC1106703)the Key Projects of the Joint Fund of the National Natural Science Foundation of China(U1804251).
文摘The cardiovascular diseases(CVD)continue to be the major threat to global public health over the years,while one of the effective methods to treat CVD is stent intervention.Biomedical magnesium(Mg)alloys have great potential applications in cardiovascular stents benefit from their excellent biodegradability and absorbability.However,excessive degradation rate and the delayed surface endothelialization still limit their further application.In this study,we modified a Mg-Zn-Y-Nd alloy(ZE21B)by preparing MgF_(2) as the corrosion resistance layer,the dopamine polymer film(PDA)as the bonding layer,and hyaluronic acid(HA)loaded astaxanthin(ASTA)as an important layer to directing the cardiovascular cells fate.The electrochemical test results showed that the MgF_(2)/PDA/HA-ASTA coating improved the corrosion resistance of ZE21B.The cytocompatibility experiments also demonstrated that this novel composite coating also selectively promoted endothelial cells proliferation,inhibited hyperproliferation of smooth muscle cells and adhesion of macrophages.Compared with the HAloaded rapamycin(RAPA)coating,our MgF_(2)/PDA/HA-ASTA coating showed better blood compatibility and cytocompatibility,indicating stronger multi-functions for the ZE21B alloy on cardiovascular application.
文摘为了解新型环保工质R1234ze(E)微小通道内的冷凝换热及阻力特性,提出采用VOF(volume of fluid)模型对R1234ze(E)和R134a(Tsat=40℃)在水平微细圆管(Dh=1mm)内的冷凝过程进行数值模拟研究,探讨质量流量、干度以及物性对管内冷凝换热和阻力性能的影响。结果表明,R1234ze(E)和R134a的换热系数和压降都随质量流速和干度的增大而增大。相同情况下,R1234ze(E)换热系数小于R134a,但压降大于R134a。R1234ze(E)的液膜厚度平均要比R134a薄15.7%。当气液两相都为湍流,有效热导率对不同工质在水平圆管内的冷凝换热性能有重要影响。R1234ze(E)在管内的液膜分布特性整体上和R134a相似。现有的关联式对R1234ze(E)的压降都存在一定的低估,平均绝对误差都在30%左右。
文摘The magnesium alloy ZE41 encompasses a wide spectrum of applications as a structural material.An extremely high susceptibility to corrosion limits widespread utility of ZE41.In the present study it has been attempted to understand the corrosion behaviour of ZE41 alloy employing electrochemical techniques like Tafel extrapolation and electrochemical impedance spectroscopy(EIS)in aqueous salt solutions containing mixture of sodium chloride and sodium sulphate over a varying range of electrolyte concentrations and solution temperatures.The morphology of the metal surface has been established by means of scanning electron microscopy(SEM).The results indicate that the rate of corrosion of ZE41 alloy increases with the increase in temperature and ionic concentration of the medium.The results of corrosion rates at varying temperatures have been utilized in the calculation of activation parameters such as activation energy,enthalpy of activation and entropy of activation for the corrosion process.
基金Department of Science and Technology, India [grant number of DST/TDT/AMT/ 2017/211(G)] (MEE/18–19/412/DSTX/SUSH) for the financial support and FIST grant, Department of Science and Technology, India [grant number SR/FST/ET11–059/2012 (G)] for funding electron microscope facilitya part of Center of Excellence (Co E) in Applied Magnesium Research (A Vertical of Center for Materials and Manufacturing for Futuristic Mobility), IIT Madrasthe Ministry of Human Resource and Development for funding this CoE through grant number–SB20210992MEMHRD008517。
文摘Mg-4Zn-1RE-0.5Zr (ZE41) Mg alloy is extensively used in the aerospace and automobile industries.In order to improve the applicability and performance,this alloy was engineered with in-situ Ti B2reinforcement to form Ti B2/ZE41 composite.The high temperature deformation behavior and manufacturability of the newly developed Ti B2/ZE41 composite and the parent ZE41 Mg alloy were studied via establishing constitutive modeling of flow stress,deformation activation energy and processing map over a temperature range of 250℃-450℃ and strain rate range of 0.001 s-1-10 s-1.The predicted flow stress behavior of both materials were found to be well consistent with the experimental values.A significant improvement in activation energy was found in Ti B2/ZE41 composite (171.54 k J/mol) as compared to the ZE41 alloy (148.15 k J/mol) due to the dispersed strengthening of in-situ Ti B2particles.The processing maps were developed via dynamic material modeling.A wider workability domain and higher peak efficiency (45%) were observed in Ti B2/ZE41 composite as compared to ZE41 alloy (41%).The Dynamic recrystallization is found to be the dominating deformation mechanism for both materials;however,particle stimulated nucleation was found to be an additional mode of deformation in Ti B2/ZE41 composite.The twinning and stress induced cracks were observed in both the materials at low temperature and high strain rate.A narrow range of instability zone is found in the present Ti B2/ZE41 composite among the existing published literature on Mg based composites.The detailed microstructural characterization was carried out in both workability and instability domains to establish the governing deformation mechanisms.
文摘Magnesium(Mg)alloys are generally used in light-weight structural applications due to their higher specific strength.However,the usage of these Mg alloys is limited due to their poor formability at room temperature,which is attributed to lower count of slip systems associated with the hcp crystal structure.To address these limitations,several new magnesium alloys and also many processing strategies have been developed and reported in the literature.ZE41 Mg is an alloy with significant quantities of zinc(Zn)and rare earth(RE)elements and has emerged as a promising material for aerospace,automotive,electronics,biomedical and many other industries.To make this alloy more competitive and viable,it should possess better mechanical and corrosion properties.Hence,the current paper reviews the effect of bulk mechanical processing on grain refinement,microstructural modification,and corresponding changes in the mechanical behaviour of ZE41Mg alloy.Further,the effect of various surface modification techniques on altering the surface microstructure and surface properties such as wear and corrosion are also briefly summarized and presented.This review also discusses the challenges and the future perspectives in developing high-performing ZE41 Mg alloys.
基金supported by the National Key R&D Program of China (grant number 2021YFC2400700)National Natural Science Foundation of China (Nos.51871004 and U1804251)。
文摘Magnesium-based biodegradable metals as cardiovascular stents have shown a lot of excellent performance, which have been used to treat coronary artery diseases. However, the excessive degradation rate, imperfect biocompatibility and delayed re-endothelialization still lead to a considerable challenge for its application. In this work, to overcome these shortcomings, a compound of catalyzing nitric oxide(NO) generation containing copper ions(Cu^(2+)) and hyaluronic acid(HA), an important component of the extracellular matrix, were covalently immobilized on a hydrofluoric acid(HF)-pretreated ZE21B alloy via amination layer for improving its corrosion resistance and endothelialization. Specifically,the Cu^(2+) chelated firmly with a cyclen 1,4,7,10-tetraazacyclododecane-N’, N’’, N’’’, N-tetraacetic acid(DOTA) could form a stability of hybrid coating, avoiding the explosion of Cu^(2+). The chelated Cu^(2+) enabled the catalytic generation of NO and promoted the adhesion and proliferation of endothelial cells(ECs) in vascular micro-environment. In this case, the synergistic effect of NO-generation and endothelial glycocalyx molecules of HA lead to efficient ECs promotion and smooth muscle cells(SMCs) inhibition. Meanwhile, the blood compatibility also had achieved a marked improvement. Moreover, the standard electrochemical measurements indicated that the functionalized ZE21B alloy had better anti-corrosion ability. In a conclusion, the dual-functional coating displays a great potential in the field of biodegradable magnesium-based implantable cardiovascular stents.
文摘There are two approaches to metaphysics that concern language,the logical and the linguistic. Zeno Vendler,who took the linguistic one,distinguished with transformational techniques between two semantic categories,namely fact and event,and regarded them as corresponding respectively to a metaphysical category of beings. In doing this he presupposed that independent semantic categories could be sorted out,and corresponding categories of beings that are independent of language can be derived. But our analysis of Vendler's case shows that it is not semantic categories but grammar that functions in differentiating event and fact. At least some semantic categories could not be separated from grammar,and this casts doubt on the linguistic approach to metaphysics. If semantic categories are not independent of grammar,we could not derive metaphysics from linguistic study.
基金supported by the National Key Research and Development Program of China(2021YFC2400703)the Key Projects of the Joint Fund of the National Natural Science Foundation of China(U1804251).
文摘Due to its excellent biocompatibility and biodegradability,Mg and its alloys are considered to be promising materials for manufacturing of vascular sent.However,the manufacture of high-precision and high-performance Mg alloys minitubes is still a worldwide problem with a long manufacturing processing caused by the poor workability of Mg alloys.To solve this problem,the cyclic extrusion compression(CEC)was used to pretreat the billet by improving the workability of Mg alloys,finally shortening the manufacturing process.After CEC treatment,the size of grains and second phase particles of Mg alloys were dramatically refined to 3.2μm and 0.3μm,respectively.Only after three passes of cold drawing,the wall thickness of minitube was reduced from 0.200 mm to 0.135 mm and a length was more than 1000 mm.The error of wall thickness was measured to be less than 0.01 mm,implying a high dimensional accuracy.The yield strength(YS),ultimate tensile strength(UTS)and elongation of finished minitube were 220±10 MPa,290±10 MPa and 22.0±0.5%,respectively.In addition,annealing can improve mechanical property and corrosion resistance of minitubes by improving the homogeneity of the microstructure and enhancing the density of basal texture.
