Background To improve our understanding of host and intestinal microbiome interaction,this research investigated the effects of a high-level zinc oxide in the diet as model intervention on the intestinal microbiome an...Background To improve our understanding of host and intestinal microbiome interaction,this research investigated the effects of a high-level zinc oxide in the diet as model intervention on the intestinal microbiome and small intestinal functionality in clinically healthy post-weaning piglets.In study 1,piglets received either a high concentration of zinc(Zn)as zinc oxide(Zn O,Zn,2,690 mg/kg)or a low Zn concentration(100 mg/kg)in the diet during the post weaning period(d 14–23).The effects on the piglet's small intestinal microbiome and functionality of intestinal tissue were investigated.In study 2,the impact of timing of the dietary zinc intervention was investigated,i.e.,between d 0–14 and/or d 14–23 post weaning,and the consecutive effects on the piglet's intestinal functionality,here referring to microbiota composition and diversity and gene expression profiles.Results Differences in the small intestinal functionality were observed during the post weaning period between piglets receiving a diet with a low or high concentration Zn O content.A shift in the microbiota composition in the small intestine was observed that could be characterized as a non-pathological change,where mainly the commensals inter-changed.In the immediate post weaning period,i.e.,d 0–14,the highest number of differentially expressed genes(DEGs)in intestinal tissue were observed between animals receiving a diet with a low or high concentration Zn O content,i.e.,23 DEGs in jejunal tissue and 11 DEGs in ileal tissue.These genes are involved in biological processes related to immunity and inflammatory responses.For example,genes CD59 and REG3G were downregulated in the animals receiving a diet with a high concentration Zn O content compared to low Zn O content in both jejunum and ileum tissue.In the second study,a similar result was obtained regarding the expression of genes in intestinal tissue related to immune pathways when comparing piglets receiving a diet with a high concentration Zn O content compared to low Zn O content.Conclusions Supplementing a diet with a pharmaceutical level of Zn as Zn O for clinically healthy post weaning piglets influences various aspects intestinal functionality,in particular in the first two weeks post-weaning.The model intervention increased both the alpha diversity of the intestinal microbiome and the expression of a limited number of genes linked to the local immune system in intestinal tissue.The effects do not seem related to a direct antimicrobial effect of Zn O.展开更多
The doping of ZnO has attracted lots of attention because it is an important way to tune the properties of ZnO.Postdoping after growth is one of the efficient strategies.Here,we report a unique approach to successfull...The doping of ZnO has attracted lots of attention because it is an important way to tune the properties of ZnO.Postdoping after growth is one of the efficient strategies.Here,we report a unique approach to successfully dope the single crystalline ZnO with Ag by the laser-induced method,which can effectively further post-treat grown samples.Magnetron sputtering was used to coat the Ag film with a thickness of about 50 nm on the single crystalline ZnO.Neodymium-doped yttrium aluminum garnet(Nd:YAG)laser was chosen to irradiate the Ag-capped ZnO samples,followed by annealing at700℃for two hours to form ZnO:Ag.The three-dimensional(3D)information of the elemental distribution of Ag in ZnO was obtained through time-of-flight secondary ion mass spectrometry(TOF-SIMS).TOF-SIMS and core-level x-ray photoelectron spectroscopy(XPS)demonstrated that the Ag impurities could be effectively doped into single crystalline ZnO samples as deep as several hundred nanometers.Obvious broadening of core level XPS profiles of Ag from the surface to depths of hundred nms was observed,indicating the variance of chemical state changes in laser-induced Ag-doped ZnO.Interesting features of electronic mixing states were detected in the valence band XPS of ZnO:Ag,suggesting the strong coupling or interaction of Ag and ZnO in the sample rather than their simple mixture.The Ag-doped ZnO also showed a narrower bandgap and a decrease in thermal diffusion coefficient compared to the pure ZnO,which would be beneficial to thermoelectric performance.展开更多
Given the consistent release of zinc oxide(ZnO)nanoparticles into the environment,it is urgent to study their impact on plants in depth.In this study,grains of rice were treated with two different concentrations of Zn...Given the consistent release of zinc oxide(ZnO)nanoparticles into the environment,it is urgent to study their impact on plants in depth.In this study,grains of rice were treated with two different concentrations of ZnO nanoparticles(NP-ZnO,10 and 100 mg/L),and their bulk counterpart(B-ZnO)were used to evaluate whether ZnO action could depend on particle size.To test this hypothesis,root growth and development assessment,oxidative stress parameters,indole-3-acetic acid(IAA)content and molecules/enzymes involved in IAA metabolism were analyzed.In situ localization of Zn in control and treated roots was also performed.Though Zn was visible inside root cells only following nanoparticle treatment,both materials(NP-ZnO and B-ZnO)were able to affect seedling growth and root morphology,with alteration in the concentration/pattern of localization of oxidative stress markers and with a different action depending on particle size.In addition,only ZnO supplied as bulk material induced a significant increase in both IAA concentration and lateral root density,supporting our hypothesis that bulk particles might enhance lateral root development through the rise of IAA concentration.Apparently,IAA concentration was influenced more by the activity of the catabolic peroxidases than by the protective action of phenols.展开更多
The zinc oxide rotary kiln,as an essential piece of equipment in the zinc smelting industrial process,is presenting new challenges in process control.China’s strategy of achieving a carbon peak and carbon neutrality ...The zinc oxide rotary kiln,as an essential piece of equipment in the zinc smelting industrial process,is presenting new challenges in process control.China’s strategy of achieving a carbon peak and carbon neutrality is putting new demands on the industry,including green production and the use of fewer resources;thus,traditional stability control is no longer suitable for multi-objective control tasks.Although researchers have revealed the principle of the rotary kiln and set up computational fluid dynamics(CFD)simulation models to study its dynamics,these models cannot be directly applied to process control due to their high computational complexity.To address these issues,this paper proposes a multi-objective adaptive optimization model predictive control(MAO-MPC)method based on sparse identification.More specifically,with a large amount of data collected from a CFD model,a sparse regression problem is first formulated and solved to obtain a reduction model.Then,a two-layered control framework including real-time optimization(RTO)and model predictive control(MPC)is designed.In the RTO layer,an optimization problem with the goal of achieving optimal operation performance and the lowest possible resource consumption is set up.By solving the optimization problem in real time,a suitable setting value is sent to the MPC layer to ensure that the zinc oxide rotary kiln always functions in an optimal state.Our experiments show the strength and reliability of the proposed method,which reduces the usage of coal while maintaining high profits.展开更多
In this paper, we present a proof-of-concept study of the enhancement of photocatalytic activity via a combined strategy of fabricating a visible-light responsive ternary heterostructure and improving overall photosta...In this paper, we present a proof-of-concept study of the enhancement of photocatalytic activity via a combined strategy of fabricating a visible-light responsive ternary heterostructure and improving overall photostability by incorporating magnetic zinc oxide/graphene/iron oxide (ZGF). A solvothermal approach was used to synthesize the catalyst. X-ray diffraction (XRD), scanning electron microscopic, energy dispersive X-ray, transmission electron microscopic, vibrating sample magnetometric, and ultraviolet–visible diffuse reflectance spectroscopic techniques were used to characterize the synthesized samples. The obtained optimal Zn(NO_(3))_(2) concentration, temperature, and heating duration were 0.10 mol/L, 600℃, and 1 h, respectively. The XRD pattern revealed the presence of peaks corresponding to zinc oxide, graphene, and iron oxide, indicating that the ZGF catalyst was effectively synthesized. Furthermore, when the developed ZGF was used for methylene blue dye degradation, the optimum irradiation time, dye concentration, catalyst dosage, irradiation intensity, and solution pH were 90 min, 10 mg/L, 0.03 g/L, 100 W, and 8.0, respectively. Therefore, the synthesized ZGF system could be used as a catalyst to degrade dyes in wastewater samples. This hybrid nanocomposite consisting of zinc oxide, graphene, and iron oxide could also be used as an effective photocatalytic degrader for various dye pollutants.展开更多
In this study we used a chemical solution method from oxalic acid (OX. acid) and zinc acetate (ZnAc) to prepare Zinc Oxide nanoparticles (ZnONPs) and Zinc Oxide nanoparticles doped with Chlorine (Cl:ZnONPs). The chara...In this study we used a chemical solution method from oxalic acid (OX. acid) and zinc acetate (ZnAc) to prepare Zinc Oxide nanoparticles (ZnONPs) and Zinc Oxide nanoparticles doped with Chlorine (Cl:ZnONPs). The characterizations (FTIR, X-ray, SEM, TEM) of ZnONPs and Cl:ZnONPs were determined. Amylase inhibitors of ZnONPs and Cl:ZnONPs also were determined. SEM indicated that the ZnONPs and Cl:ZnONPs have an average particle size of 46.65 - 74.64 nm. TEM images of the ZnONPs and Cl:ZnONPs showed the round shaped. Compounds b,<span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">d and e exhibited significant inhibitory activity against amylase enzyme</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">(from 69.21</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">±</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">1.44 to 76.32</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">±</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">0.78), respectively, and were comparable with that of acarbose (86.32 ± 0.63) at 1000</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">μg, thereby, projecting ZnONPs and Cl:ZnONPs as </span><i><span style="font-family:Verdana;">α</span></i><span style="font-family:Verdana;">-amylase inhibitors.</span></span></span></span>展开更多
Transparent and conducting zirconium-doped zinc oxide films with high transparency and relatively low resistivity have been successfully prepared by radio frequency (RF) msgnetron sputtering at room temperature, The...Transparent and conducting zirconium-doped zinc oxide films with high transparency and relatively low resistivity have been successfully prepared by radio frequency (RF) msgnetron sputtering at room temperature, The RF power is varied from 75 to 150 W. At first the crystallinity and conductivity of the film are improved and then both of them show deterioration with the increase of the RF power, The lowest resistivity achieved is 2.07 × 10^-3Ωcm at an RF power of 100W with a Hall mobility of 16cm^2V^-1s^-1 and a carrier concentration of 1.95 × 10^20 cm^-3. The films obtained are polycryetalline with a hexagonal structure and a preferred orientation along the c-axis, All the films have a high transmittance of approximately 92% in the visible range. The optical band gap is about 3.33 eV for the films deposited at different RF powers.展开更多
Currently,electromagnetic radiation and interference have a significant effect on the operation of electronic devices and human health systems.Thus,developing excellent microwave absorbers have a huge significance in ...Currently,electromagnetic radiation and interference have a significant effect on the operation of electronic devices and human health systems.Thus,developing excellent microwave absorbers have a huge significance in the material research field.Herein,a kind of ultrafine zinc oxide(ZnO)nanoparticles(NPs)supported on three-dimensional(3D)ordered mesoporous carbon spheres(ZnO/OMCS)is prepared from silica inverse opal by using phenolic resol precursor as carbon source.The prepared lightweight ZnO/OMCS nanocomposites exhibit 3D ordered carbon sphere array and highly dispersed ultrafine ZnO NPs on the mesoporous cell walls of carbon spheres.ZnO/OMCS-30 shows microwave absorbing ability with a strong absorption(−39.3 dB at 10.4 GHz with a small thickness of 2 mm)and a broad effective absorption bandwidth(9.1 GHz).The outstanding microwave absorbing ability benefits to the well-dispersed ultrafine ZnO NPs and the 3D ordered mesoporous carbon spheres structure.This work opened up a unique way for developing lightweight and high-efficient carbon-based microwave absorbing materials.展开更多
t Molecular dynamics (MD) simulations are carried out to characterize the mechanical and thermal responses of [011^-1]-oriented ZnO nanobelts with lateral dimensions of 21.22A × 18.95 A, 31.02A× 29.42 A, a...t Molecular dynamics (MD) simulations are carried out to characterize the mechanical and thermal responses of [011^-1]-oriented ZnO nanobelts with lateral dimensions of 21.22A × 18.95 A, 31.02A× 29.42 A, and40.81A ×39.89A over the temperature range of 300-1000 K. The Young's modulus and thermal conductivity of the nanobelts are evaluated. Significant surface effects on properties due to the highsurface-to-volume ratios of the nanobelts are observed. For the mechanical response, surface-stress-induced internal stress plays an important role. For the thermal response, surface scattering of phonons dominates. Calculations show that the Young's modulus is higher than the corresponding value for bulk ZnO and decreases by -33% as the lateral dimensions increase from 21.22 A × 18.95A to 40.81 A × 39.89A. The thermal conductivity is one order of magnitude lower than the corresponding value for bulk ZnO single crystal and decreases with wire size. Specifically, the conductivity of the 21.22 A × 18.95 A belt is approximately (31-18)% lower than that of the 40.81 A × 39.89 A belt over the temperature range analyzed. A significant dependence of properties on temperature is also observed, with the Young's modulus decreasing on average by 12% and the conductivity decreasing by 50% as temperature increases from 300 K to 1000 K.展开更多
This article reviews recent progresses in growth mechanism, synthesis, and applications of zinc oxide nano-materials (mainly focusing on one-dimensional (1D) nanomaterials). In the first part of this article, we b...This article reviews recent progresses in growth mechanism, synthesis, and applications of zinc oxide nano-materials (mainly focusing on one-dimensional (1D) nanomaterials). In the first part of this article, we briefly introduce the importance, the synthesis methods and growth mechanisms, the properties and applications of ZnO 1D nanomaterials. In the second part of this article, the growth mechanisms of ZnO 1D nanomaterials will be discussed in detail in the framework of vapor-liquid-solid (VLS), vapor-solid (VS), and aqueous solution growth (ASG) approaches. Both qualitative and quantitative information will be provided to show how a controlled synthesis of ZnO 1D nanomaterials can be achieved. In the third part of this article, we present recent progresses in our group for the synthesis of ZnO 1D nanomaterials, and the results from other groups will only be mentioned briefly. Especially, experiment designing according to theories will be elaborated to demonstrate the concept of controlled synthesis. In the fourth part of this article, the properties and potential applications of ZnO 1D nanomaterials will be treated. Finally, a summary part will be presented in the fifth section. The future trend of research for ZnO 1D nanomaterials will be pointed out and key issues to be solved will be proposed.展开更多
Indium was recovered from zinc oxide flue dust(ZOFD)with sulfuric acid by oxidative pressure leaching in an autoclave, and the effects of different technological conditions on indium leaching were studied.Potassium pe...Indium was recovered from zinc oxide flue dust(ZOFD)with sulfuric acid by oxidative pressure leaching in an autoclave, and the effects of different technological conditions on indium leaching were studied.Potassium permanganate and hydrogen peroxide were used as oxidants.The atmospheric pressure leaching experiments were also carried out.The experimental results show that the leaching rate of indium can be effectively improved by oxidative pressure leaching.The optimum conditions of pressure leaching are determined as sulfuric 5.10 mol/L acid,leaching time 150 min,temperature 90℃,and the H2O2 dosage of 0.5 mL/g or 2.5%KMnO4.The leaching rate of indium is more than 90%,which is increased by 13%compared with that of atmospheric pressure leaching process without oxidant under the optimum conditions.展开更多
Industrial application of microwave, as a heating source for material processing, was reviewed. The feasibility of carbothermic reduction of zinc oxide concentrate, as well as the effect of operating parameters was in...Industrial application of microwave, as a heating source for material processing, was reviewed. The feasibility of carbothermic reduction of zinc oxide concentrate, as well as the effect of operating parameters was investigated, using a home style microwave oven at 2.45 GHz. Zinc oxide concentrate does not effectively absorb microwave energy, while any source of carbon, which is used as the reduction agent, absorbs microwave energy very well. In this respect coke breeze was found to be the best, and thus, coke was used both as the reducing agent and the absorbent of microwave energy. It was also found that any increase in the carbon content and size, increases the reduction rate. Increasing the microwave power and the size of the sample could also increase the reduction rate. Further investigation shows that when zinc oxide is exposed to the microwave for some time, the rate of the reduction by conventional method increases.展开更多
Zinc oxide(ZnO) nanoparticles of varying sizes(20, 44 and 73 nm) have been successfully synthesized by a hybrid electrochemical-thermal method using aqueous sodium bicarbonate electrolyte and sacrificial Zn anode and ...Zinc oxide(ZnO) nanoparticles of varying sizes(20, 44 and 73 nm) have been successfully synthesized by a hybrid electrochemical-thermal method using aqueous sodium bicarbonate electrolyte and sacrificial Zn anode and cathode in an undivided cell under galvanostatic mode at room temperature. The as-synthesized product was characterized by X-ray diffraction(XRD), X-ray photoelectron spectra(XPS), Scanning electron microscopy along with Energy dispersive analysis of X-ray(SEM/EDAX), Transmission electron microscopy(TEM), Ultra Violet- Diffuse reflectance spectroscopic methods(UV-DRS). and UV-DRS spectral methods.The as-synthesized compound were single-crystalline and Rietveld refinement of calcined samples exhibited hexagonal(Wurtzite) structure with space group of P63mc(No.186). The band gaps for synthesized ZnO nanoparticles were 3.07, 3.12 and 3.13 e V, respectively, based on the results of diffuse reflectance spectra(DRS). The electrochemically synthesized ZnO powder was used as photocatalysts for UV-induced degradation of Methylene blue(MB). Photodegradation was also found to be function of exposure time and dye solution p H. It has been found that as-synthesized powder has excellent photocatalytic activity with 92% degradation of MB, indicating ZnO nanoparticles can play an important role as a semiconductor photocatalyst.展开更多
Nanoparticles are increasingly being recognized for their potential utility in biological applications including nanomedicine.Here,we have synthesized zinc oxide(ZnO)nanorods using zinc acetate and hexamethylenetetram...Nanoparticles are increasingly being recognized for their potential utility in biological applications including nanomedicine.Here,we have synthesized zinc oxide(ZnO)nanorods using zinc acetate and hexamethylenetetramine as precursors followed by characterizing using X-ray diffraction,fourier transform infrared spectroscopy,scanning electron microscopy and transmission electron microscopy.The growth of synthesized zinc oxide nanorods was found to be very close to its hexagonal nature,which is confirmed by X-ray diffraction.The nanorod was grown perpendicular to the long-axis and grew along the[001]direction,which is the nature of ZnO growth.The morphology of synthesized ZnO nanorods from the individual crystalline nucleus was confirmed by scanning and transmission electron microscopy.The length of the nanorod was estimated to be around 21 nm in diameter and 50 nm in length.Our toxicology studies showed that synthesized ZnO nanorods exposure on hela cells has no significant induction of oxidative stress or cell death even in higher concentration(10μg/ml).The results suggest that ZnO nanorods might be a safer nanomaterial for biological applications.展开更多
Zinc oxide(ZnO) is a compound semiconductor with a direct band gap and high exciton binding energy.The unique property,i.e.,high efficient light emission at ultraviolet band,makes ZnO potentially applied to the shor...Zinc oxide(ZnO) is a compound semiconductor with a direct band gap and high exciton binding energy.The unique property,i.e.,high efficient light emission at ultraviolet band,makes ZnO potentially applied to the short-wavelength light emitting devices.However,efficient p-type doping is extremely hard for ZnO.Due to the wide band gap and low valence band energy,the self-compensation from donors and high ionization energy of acceptors are the two main problems hindering the enhancement of free hole concentration.Native defects in ZnO can be divided into donor-like and acceptorlike ones.The self-compensation has been found mainly to originate from zinc interstitial and oxygen vacancy related donors.While the acceptor-like defect,zinc vacancy,is thought to be linked to complex shallow acceptors in group-VA doped ZnO.Therefore,the understanding of the behaviors of the native defects is critical to the realization of high-efficient p-type conduction.Meanwhile,some novel ideas have been extensively proposed,like double-acceptor co-doping,acceptor doping in iso-valent element alloyed ZnO,etc.,and have opened new directions for p-type doping.Some of the approaches have been positively judged.In this article,we thus review the recent(2011-now) research progress of the native defects and p-type doping approaches globally.We hope to provide a comprehensive overview and describe a complete picture of the research status of the p-type doping in ZnO for the reference of the researchers in a similar area.展开更多
The effects of the supporting reagents hexamethylenetetramine(HMTA)and potassium chloride(KCl)mixed in zinc nitrate hexahydrate(Zn(NO3)2 6H2O)on the morphological,structural,and optical properties of the resulting Zn ...The effects of the supporting reagents hexamethylenetetramine(HMTA)and potassium chloride(KCl)mixed in zinc nitrate hexahydrate(Zn(NO3)2 6H2O)on the morphological,structural,and optical properties of the resulting Zn O nanostructures electrodeposited on graphene/glass substrates were investigated.The supporting reagent HMTA does not increase the density of nanorods,but it does remarkably improve the smoothness of the top edge surfaces and the hexagonal shape of the nanorods even at a low temperature of 75°C.Hydroxyl(OH-)ions from the HMTA suppress the sidewall growth of non-polar planes and promote the growth of Zn O on the polar plane to produce vertically aligned nanorods along the c axis.By contrast,the highly electronegative chlorine(Cl-)ions from the supporting reagent KCl suppress the growth of Zn O on the polar plane and promote the growth on non-polar planes to produce vertical stacking nanowall structures.HMTA was found to be able to significantly improve the crystallinity of the grown Zn O structures,as indicated by the observation of much lower FWHM values and a higher intensity ratio of the emission in the UV region to the emission in the visible region.Equimolar mixtures of Zn(NO3)2 6H2O and the supporting reagents HMTA and KCl seem to provide the optimum ratio of concentrations for the growth of high-density,uniform Zn O nanostructures.The corresponding transmittances for such molar ranges are approximately 55–58%(HMTA)and 63–70%(KCl),which are acceptable for solar cell and optoelectronic devices.展开更多
The determination of trace impurities in high purity zinc oxide by high resolution inductively coupled plasma mass spectrometry ( HR-ICP-MS ) was investigated. To overcome some poteutially problematic spectral iuter...The determination of trace impurities in high purity zinc oxide by high resolution inductively coupled plasma mass spectrometry ( HR-ICP-MS ) was investigated. To overcome some poteutially problematic spectral iuterference, measurements were acquired in both middle and high resolution modes. The matrix effects due to the presence of excess HCl and zinc were evaluated. The optimum conditions for the determination were tested and discussed. The standard addition method was employed for quantitative analysis. The detection limits ranged from 0.02μg/ g to 6 μg/ g depending on the elements. The experimental resalts for the determination of Na, Mg, Ca, Cr, Mn, Fe, Co, Ni, Cu, Mo, Cd, Sb and Pb in several high purity zinc oxide powders were presented.展开更多
The aim of this study was to synthesize zinc borate using zinc oxide, reference boric acid, and reference zinc borate (reference ZB) as the seed, and to investigate the effects of modifying agents and reaction param...The aim of this study was to synthesize zinc borate using zinc oxide, reference boric acid, and reference zinc borate (reference ZB) as the seed, and to investigate the effects of modifying agents and reaction parameters on the hydrophobicity and yield, respectively. The reaction parameters include reaction time (1-5 h), reactant ratio (H3BO3/ZnO by mass: 2-5), seed ratio (seed crystal/(H3BO3+ZnO) by mass: 0-2wt%), reaction temperature (50-120~C), cooling temperature (10-80~C), and stirring rate (400-700 r/min); the modifying agents involve propylene glycol (PG, 0-6wt%), kerosene (lwt%-6wt%), and oleic acid (OA, lwt%-6wt%) with solvents (isopropyl alcohol (IPA), ethanol, and methanol). The results of reaction yield obtained from either magnetically or mechanically stirred systems were compared. Zinc borate produced was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and contact angle tests to identify the hydrophobicity. In conclusion, zinc borate is synthesized successfully under the optimized reaction conditions, and the different modifying agents with various solvents affect the hydrophobicity of zinc borate.展开更多
BACKGROUND Gastric cancer(GC)is a common malignancy that results in a high rate of cancerrelated mortality.Cisplatin(DDP)-based chemotherapy is the first-line clinical treatment for GC therapy,but chemotherapy resista...BACKGROUND Gastric cancer(GC)is a common malignancy that results in a high rate of cancerrelated mortality.Cisplatin(DDP)-based chemotherapy is the first-line clinical treatment for GC therapy,but chemotherapy resistance remains a severe clinical challenge.Zinc oxide nanoparticle(ZnO-NP)has been identified as a promising anti-cancer agent,but the function of ZnO-NP in GC development is still unclear.AIM To explore the effect of ZnO-NP on chemotherapy resistance during GC progression.METHODS ZnO-NP was synthesized,and the effect and underlying mechanisms of ZnO-NP on the malignant progression and chemotherapy resistance of GC cells were analyzed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide(MTT)assays,colony formation assays,transwell assays,wound healing assays,flow cytometry,and Western blot analysis in GC cells and DDP-resistant GC cells,and by tumorigenicity analyses in nude mice.RESULTS Our data revealed that ZnO-NP was able to inhibit proliferation,migration,and invasion and induce apoptosis of GC cells.Meanwhile,ZnO-NP significantly reduced the half maximal inhibitory concentration(IC50)of DDP for the inhibition of cell proliferation of DDP-resistant SGC7901/DDP cell lines.Autophagy was increased in DDP-resistant GC cells,as demonstrated by elevated light chain 3-like protein 2(LC3II)/LC3I and Beclin-1 expression and repressed p62 expression in SGC7901/DDP cells compared to SGC7901 cells.Mechanically,ZnO-NP inhibited autophagy in GC cells and treatment with DDP induced autophagy,which was reversed by ZnO-NP.Functionally,ZnO-NP attenuated the tumor growth of DDP-resistant GC cells in vivo.CONCLUSION We conclude that ZnO-NP alleviates the chemoresistance of GC cells by inhibiting autophagy.Our findings present novel insights into the mechanism by which ZnO-NP regulates the chemotherapy resistance of GC.ZnO-NP may serve as a potential therapeutic candidate for GC treatment.The potential role of ZnO-NP in the clinical treatment of GC needs clarification in future investigations.展开更多
We present in this paper a study of the structural and photoluminescence (PL) properties of terbium (Tb) doped zinc oxide (ZnO) nanoparticles synthesized by a simple low temperature chemical precipitation method...We present in this paper a study of the structural and photoluminescence (PL) properties of terbium (Tb) doped zinc oxide (ZnO) nanoparticles synthesized by a simple low temperature chemical precipitation method, using zinc acetate and terbium nitrate in an isopropanol medium with diethanolamine (DEA) as the capping agent at 60 ℃. The as-prepared samples were heat treated and the PL of the annealed samples were studied. The prepared nanoparticles were characterized with X-ray diffraction (XRD). The XRD patterns show the pattern of typical ZnO nanoparticles and correspond with the standard XRD pattern given by JCPDS card No. 36-1451, showing the hexagonal phase structure. The PL intensity was enhanced due to Tb^3+ doping, and it decreased at higher concentrations of Tb^3+ doping after reaching a certain optimum concentration. The PL spectra of Tb^3+ doped samples exhibited blue, bluish green, and green emissions at 460 nm (5^D3 - 7^F3), 484 nm (5^D4 - 7^F6), and 530 nm (5^D4 - 7^F5), respectively, which were more intense than the emissions for the undoped ZnO sample. Based on the results, an energy level schematic diagram was proposed to explain the possible electron transition processes.展开更多
基金partially funded by the Ministry of AgricultureNature and Food Quality(project number BO-55-001-015)partly by“Vereniging Diervoederonderzoek Nederland”。
文摘Background To improve our understanding of host and intestinal microbiome interaction,this research investigated the effects of a high-level zinc oxide in the diet as model intervention on the intestinal microbiome and small intestinal functionality in clinically healthy post-weaning piglets.In study 1,piglets received either a high concentration of zinc(Zn)as zinc oxide(Zn O,Zn,2,690 mg/kg)or a low Zn concentration(100 mg/kg)in the diet during the post weaning period(d 14–23).The effects on the piglet's small intestinal microbiome and functionality of intestinal tissue were investigated.In study 2,the impact of timing of the dietary zinc intervention was investigated,i.e.,between d 0–14 and/or d 14–23 post weaning,and the consecutive effects on the piglet's intestinal functionality,here referring to microbiota composition and diversity and gene expression profiles.Results Differences in the small intestinal functionality were observed during the post weaning period between piglets receiving a diet with a low or high concentration Zn O content.A shift in the microbiota composition in the small intestine was observed that could be characterized as a non-pathological change,where mainly the commensals inter-changed.In the immediate post weaning period,i.e.,d 0–14,the highest number of differentially expressed genes(DEGs)in intestinal tissue were observed between animals receiving a diet with a low or high concentration Zn O content,i.e.,23 DEGs in jejunal tissue and 11 DEGs in ileal tissue.These genes are involved in biological processes related to immunity and inflammatory responses.For example,genes CD59 and REG3G were downregulated in the animals receiving a diet with a high concentration Zn O content compared to low Zn O content in both jejunum and ileum tissue.In the second study,a similar result was obtained regarding the expression of genes in intestinal tissue related to immune pathways when comparing piglets receiving a diet with a high concentration Zn O content compared to low Zn O content.Conclusions Supplementing a diet with a pharmaceutical level of Zn as Zn O for clinically healthy post weaning piglets influences various aspects intestinal functionality,in particular in the first two weeks post-weaning.The model intervention increased both the alpha diversity of the intestinal microbiome and the expression of a limited number of genes linked to the local immune system in intestinal tissue.The effects do not seem related to a direct antimicrobial effect of Zn O.
基金Project supported by the National Key Research and Development Program of China(Grant No.2022YFB3605403)。
文摘The doping of ZnO has attracted lots of attention because it is an important way to tune the properties of ZnO.Postdoping after growth is one of the efficient strategies.Here,we report a unique approach to successfully dope the single crystalline ZnO with Ag by the laser-induced method,which can effectively further post-treat grown samples.Magnetron sputtering was used to coat the Ag film with a thickness of about 50 nm on the single crystalline ZnO.Neodymium-doped yttrium aluminum garnet(Nd:YAG)laser was chosen to irradiate the Ag-capped ZnO samples,followed by annealing at700℃for two hours to form ZnO:Ag.The three-dimensional(3D)information of the elemental distribution of Ag in ZnO was obtained through time-of-flight secondary ion mass spectrometry(TOF-SIMS).TOF-SIMS and core-level x-ray photoelectron spectroscopy(XPS)demonstrated that the Ag impurities could be effectively doped into single crystalline ZnO samples as deep as several hundred nanometers.Obvious broadening of core level XPS profiles of Ag from the surface to depths of hundred nms was observed,indicating the variance of chemical state changes in laser-induced Ag-doped ZnO.Interesting features of electronic mixing states were detected in the valence band XPS of ZnO:Ag,suggesting the strong coupling or interaction of Ag and ZnO in the sample rather than their simple mixture.The Ag-doped ZnO also showed a narrower bandgap and a decrease in thermal diffusion coefficient compared to the pure ZnO,which would be beneficial to thermoelectric performance.
基金financed by local funding of the University of Pisa。
文摘Given the consistent release of zinc oxide(ZnO)nanoparticles into the environment,it is urgent to study their impact on plants in depth.In this study,grains of rice were treated with two different concentrations of ZnO nanoparticles(NP-ZnO,10 and 100 mg/L),and their bulk counterpart(B-ZnO)were used to evaluate whether ZnO action could depend on particle size.To test this hypothesis,root growth and development assessment,oxidative stress parameters,indole-3-acetic acid(IAA)content and molecules/enzymes involved in IAA metabolism were analyzed.In situ localization of Zn in control and treated roots was also performed.Though Zn was visible inside root cells only following nanoparticle treatment,both materials(NP-ZnO and B-ZnO)were able to affect seedling growth and root morphology,with alteration in the concentration/pattern of localization of oxidative stress markers and with a different action depending on particle size.In addition,only ZnO supplied as bulk material induced a significant increase in both IAA concentration and lateral root density,supporting our hypothesis that bulk particles might enhance lateral root development through the rise of IAA concentration.Apparently,IAA concentration was influenced more by the activity of the catabolic peroxidases than by the protective action of phenols.
基金supported in part by the National Key Research and Development Program of China(2022YFB3304900)in part by the National Natural Science Foundation of China(61988101,62073340,and 61860206014)+2 种基金in part by the Major Key Project of Peng Cheng Laboratory(PCL)(PCL2021A09)in part by the Science and Technology Innovation Program of Hunan Province(2022JJ10083,2021RC3018,and 2021RC4054)in part by the Innovation-Driven Project of Central South University,China(2019CX020)。
文摘The zinc oxide rotary kiln,as an essential piece of equipment in the zinc smelting industrial process,is presenting new challenges in process control.China’s strategy of achieving a carbon peak and carbon neutrality is putting new demands on the industry,including green production and the use of fewer resources;thus,traditional stability control is no longer suitable for multi-objective control tasks.Although researchers have revealed the principle of the rotary kiln and set up computational fluid dynamics(CFD)simulation models to study its dynamics,these models cannot be directly applied to process control due to their high computational complexity.To address these issues,this paper proposes a multi-objective adaptive optimization model predictive control(MAO-MPC)method based on sparse identification.More specifically,with a large amount of data collected from a CFD model,a sparse regression problem is first formulated and solved to obtain a reduction model.Then,a two-layered control framework including real-time optimization(RTO)and model predictive control(MPC)is designed.In the RTO layer,an optimization problem with the goal of achieving optimal operation performance and the lowest possible resource consumption is set up.By solving the optimization problem in real time,a suitable setting value is sent to the MPC layer to ensure that the zinc oxide rotary kiln always functions in an optimal state.Our experiments show the strength and reliability of the proposed method,which reduces the usage of coal while maintaining high profits.
基金supported by the Research and Development Institute at Nakhon Si Thammarat Rajabhat University and the Nanomaterials Chemistry Research Unit at Nakhon Si Thammarat Rajabhat University,Nakhon Si Thammarat,Thailand(Grant No.004/2563).
文摘In this paper, we present a proof-of-concept study of the enhancement of photocatalytic activity via a combined strategy of fabricating a visible-light responsive ternary heterostructure and improving overall photostability by incorporating magnetic zinc oxide/graphene/iron oxide (ZGF). A solvothermal approach was used to synthesize the catalyst. X-ray diffraction (XRD), scanning electron microscopic, energy dispersive X-ray, transmission electron microscopic, vibrating sample magnetometric, and ultraviolet–visible diffuse reflectance spectroscopic techniques were used to characterize the synthesized samples. The obtained optimal Zn(NO_(3))_(2) concentration, temperature, and heating duration were 0.10 mol/L, 600℃, and 1 h, respectively. The XRD pattern revealed the presence of peaks corresponding to zinc oxide, graphene, and iron oxide, indicating that the ZGF catalyst was effectively synthesized. Furthermore, when the developed ZGF was used for methylene blue dye degradation, the optimum irradiation time, dye concentration, catalyst dosage, irradiation intensity, and solution pH were 90 min, 10 mg/L, 0.03 g/L, 100 W, and 8.0, respectively. Therefore, the synthesized ZGF system could be used as a catalyst to degrade dyes in wastewater samples. This hybrid nanocomposite consisting of zinc oxide, graphene, and iron oxide could also be used as an effective photocatalytic degrader for various dye pollutants.
文摘In this study we used a chemical solution method from oxalic acid (OX. acid) and zinc acetate (ZnAc) to prepare Zinc Oxide nanoparticles (ZnONPs) and Zinc Oxide nanoparticles doped with Chlorine (Cl:ZnONPs). The characterizations (FTIR, X-ray, SEM, TEM) of ZnONPs and Cl:ZnONPs were determined. Amylase inhibitors of ZnONPs and Cl:ZnONPs also were determined. SEM indicated that the ZnONPs and Cl:ZnONPs have an average particle size of 46.65 - 74.64 nm. TEM images of the ZnONPs and Cl:ZnONPs showed the round shaped. Compounds b,<span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">d and e exhibited significant inhibitory activity against amylase enzyme</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">(from 69.21</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">±</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">1.44 to 76.32</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">±</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">0.78), respectively, and were comparable with that of acarbose (86.32 ± 0.63) at 1000</span></span></span><span><span><span style="font-family:;" "=""> </span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;">μg, thereby, projecting ZnONPs and Cl:ZnONPs as </span><i><span style="font-family:Verdana;">α</span></i><span style="font-family:Verdana;">-amylase inhibitors.</span></span></span></span>
基金Project supported by the National Key Basic Research and Development Programme of China (Grant No 2001CB610504) and the National Natural Science Foundation of China (Grant Nos 60576039 and 10374060).Acknowledgments We thank Dr Wang Zhuo and Dr Yang ChangHong for their assistance in the experiment.
文摘Transparent and conducting zirconium-doped zinc oxide films with high transparency and relatively low resistivity have been successfully prepared by radio frequency (RF) msgnetron sputtering at room temperature, The RF power is varied from 75 to 150 W. At first the crystallinity and conductivity of the film are improved and then both of them show deterioration with the increase of the RF power, The lowest resistivity achieved is 2.07 × 10^-3Ωcm at an RF power of 100W with a Hall mobility of 16cm^2V^-1s^-1 and a carrier concentration of 1.95 × 10^20 cm^-3. The films obtained are polycryetalline with a hexagonal structure and a preferred orientation along the c-axis, All the films have a high transmittance of approximately 92% in the visible range. The optical band gap is about 3.33 eV for the films deposited at different RF powers.
基金The authors are grateful of the financial support by the National Natural Science Foundation of China(51902083 and 21606068)the Foundation Strengthening Program(2019-JCJQ-142-00)the Higher Education Science and Technology Research Project of Hebei Province(ZD2019087).
文摘Currently,electromagnetic radiation and interference have a significant effect on the operation of electronic devices and human health systems.Thus,developing excellent microwave absorbers have a huge significance in the material research field.Herein,a kind of ultrafine zinc oxide(ZnO)nanoparticles(NPs)supported on three-dimensional(3D)ordered mesoporous carbon spheres(ZnO/OMCS)is prepared from silica inverse opal by using phenolic resol precursor as carbon source.The prepared lightweight ZnO/OMCS nanocomposites exhibit 3D ordered carbon sphere array and highly dispersed ultrafine ZnO NPs on the mesoporous cell walls of carbon spheres.ZnO/OMCS-30 shows microwave absorbing ability with a strong absorption(−39.3 dB at 10.4 GHz with a small thickness of 2 mm)and a broad effective absorption bandwidth(9.1 GHz).The outstanding microwave absorbing ability benefits to the well-dispersed ultrafine ZnO NPs and the 3D ordered mesoporous carbon spheres structure.This work opened up a unique way for developing lightweight and high-efficient carbon-based microwave absorbing materials.
基金The project supported by the US National Science Foundation through CAREER grant no. CMS9984298the National Natural Science Foundation of China (10528205)
文摘t Molecular dynamics (MD) simulations are carried out to characterize the mechanical and thermal responses of [011^-1]-oriented ZnO nanobelts with lateral dimensions of 21.22A × 18.95 A, 31.02A× 29.42 A, and40.81A ×39.89A over the temperature range of 300-1000 K. The Young's modulus and thermal conductivity of the nanobelts are evaluated. Significant surface effects on properties due to the highsurface-to-volume ratios of the nanobelts are observed. For the mechanical response, surface-stress-induced internal stress plays an important role. For the thermal response, surface scattering of phonons dominates. Calculations show that the Young's modulus is higher than the corresponding value for bulk ZnO and decreases by -33% as the lateral dimensions increase from 21.22 A × 18.95A to 40.81 A × 39.89A. The thermal conductivity is one order of magnitude lower than the corresponding value for bulk ZnO single crystal and decreases with wire size. Specifically, the conductivity of the 21.22 A × 18.95 A belt is approximately (31-18)% lower than that of the 40.81 A × 39.89 A belt over the temperature range analyzed. A significant dependence of properties on temperature is also observed, with the Young's modulus decreasing on average by 12% and the conductivity decreasing by 50% as temperature increases from 300 K to 1000 K.
基金the National Natural Science Foundation of China under grant No.10574131Anhui Provincial Key Laboratory Special Fundthe Presidential Scholarship Special Fund.
文摘This article reviews recent progresses in growth mechanism, synthesis, and applications of zinc oxide nano-materials (mainly focusing on one-dimensional (1D) nanomaterials). In the first part of this article, we briefly introduce the importance, the synthesis methods and growth mechanisms, the properties and applications of ZnO 1D nanomaterials. In the second part of this article, the growth mechanisms of ZnO 1D nanomaterials will be discussed in detail in the framework of vapor-liquid-solid (VLS), vapor-solid (VS), and aqueous solution growth (ASG) approaches. Both qualitative and quantitative information will be provided to show how a controlled synthesis of ZnO 1D nanomaterials can be achieved. In the third part of this article, we present recent progresses in our group for the synthesis of ZnO 1D nanomaterials, and the results from other groups will only be mentioned briefly. Especially, experiment designing according to theories will be elaborated to demonstrate the concept of controlled synthesis. In the fourth part of this article, the properties and potential applications of ZnO 1D nanomaterials will be treated. Finally, a summary part will be presented in the fifth section. The future trend of research for ZnO 1D nanomaterials will be pointed out and key issues to be solved will be proposed.
基金Project(2008105930817D017)supported by Graduate Student Educational Innovation Foundation of Guangxi,ChinaProject(0728238)supported by the Natural Science Foundation of Guangxi,China
文摘Indium was recovered from zinc oxide flue dust(ZOFD)with sulfuric acid by oxidative pressure leaching in an autoclave, and the effects of different technological conditions on indium leaching were studied.Potassium permanganate and hydrogen peroxide were used as oxidants.The atmospheric pressure leaching experiments were also carried out.The experimental results show that the leaching rate of indium can be effectively improved by oxidative pressure leaching.The optimum conditions of pressure leaching are determined as sulfuric 5.10 mol/L acid,leaching time 150 min,temperature 90℃,and the H2O2 dosage of 0.5 mL/g or 2.5%KMnO4.The leaching rate of indium is more than 90%,which is increased by 13%compared with that of atmospheric pressure leaching process without oxidant under the optimum conditions.
文摘Industrial application of microwave, as a heating source for material processing, was reviewed. The feasibility of carbothermic reduction of zinc oxide concentrate, as well as the effect of operating parameters was investigated, using a home style microwave oven at 2.45 GHz. Zinc oxide concentrate does not effectively absorb microwave energy, while any source of carbon, which is used as the reduction agent, absorbs microwave energy very well. In this respect coke breeze was found to be the best, and thus, coke was used both as the reducing agent and the absorbent of microwave energy. It was also found that any increase in the carbon content and size, increases the reduction rate. Increasing the microwave power and the size of the sample could also increase the reduction rate. Further investigation shows that when zinc oxide is exposed to the microwave for some time, the rate of the reduction by conventional method increases.
基金CSIR, New-Delhi for SRF [Sanction No. 09/908(0002) 2K9-EMR-I]DST [No. S.R/S3/ME/014/2007]Government of India (GOI) for research grant
文摘Zinc oxide(ZnO) nanoparticles of varying sizes(20, 44 and 73 nm) have been successfully synthesized by a hybrid electrochemical-thermal method using aqueous sodium bicarbonate electrolyte and sacrificial Zn anode and cathode in an undivided cell under galvanostatic mode at room temperature. The as-synthesized product was characterized by X-ray diffraction(XRD), X-ray photoelectron spectra(XPS), Scanning electron microscopy along with Energy dispersive analysis of X-ray(SEM/EDAX), Transmission electron microscopy(TEM), Ultra Violet- Diffuse reflectance spectroscopic methods(UV-DRS). and UV-DRS spectral methods.The as-synthesized compound were single-crystalline and Rietveld refinement of calcined samples exhibited hexagonal(Wurtzite) structure with space group of P63mc(No.186). The band gaps for synthesized ZnO nanoparticles were 3.07, 3.12 and 3.13 e V, respectively, based on the results of diffuse reflectance spectra(DRS). The electrochemically synthesized ZnO powder was used as photocatalysts for UV-induced degradation of Methylene blue(MB). Photodegradation was also found to be function of exposure time and dye solution p H. It has been found that as-synthesized powder has excellent photocatalytic activity with 92% degradation of MB, indicating ZnO nanoparticles can play an important role as a semiconductor photocatalyst.
基金supported by NASA funding NNX08BA47ANCC-1-02038+1 种基金NIH-1P20MD001822-1NSF(RISE)HRD-0734846
文摘Nanoparticles are increasingly being recognized for their potential utility in biological applications including nanomedicine.Here,we have synthesized zinc oxide(ZnO)nanorods using zinc acetate and hexamethylenetetramine as precursors followed by characterizing using X-ray diffraction,fourier transform infrared spectroscopy,scanning electron microscopy and transmission electron microscopy.The growth of synthesized zinc oxide nanorods was found to be very close to its hexagonal nature,which is confirmed by X-ray diffraction.The nanorod was grown perpendicular to the long-axis and grew along the[001]direction,which is the nature of ZnO growth.The morphology of synthesized ZnO nanorods from the individual crystalline nucleus was confirmed by scanning and transmission electron microscopy.The length of the nanorod was estimated to be around 21 nm in diameter and 50 nm in length.Our toxicology studies showed that synthesized ZnO nanorods exposure on hela cells has no significant induction of oxidative stress or cell death even in higher concentration(10μg/ml).The results suggest that ZnO nanorods might be a safer nanomaterial for biological applications.
基金Project supported by the State Key Program for Basic Research of China(Grant No.2011CB302003)the National Natural Science Foundation of China(Grant Nos.61274058,61322403,61504057,and 61574075)+1 种基金the Natural Science Foundation of Jiangsu Province,China(Grant Nos.BK20130013 and BK20150585)the Six Talent Peaks Project in Jiangsu Province,China(Grant No.2014XXRJ001)
文摘Zinc oxide(ZnO) is a compound semiconductor with a direct band gap and high exciton binding energy.The unique property,i.e.,high efficient light emission at ultraviolet band,makes ZnO potentially applied to the short-wavelength light emitting devices.However,efficient p-type doping is extremely hard for ZnO.Due to the wide band gap and low valence band energy,the self-compensation from donors and high ionization energy of acceptors are the two main problems hindering the enhancement of free hole concentration.Native defects in ZnO can be divided into donor-like and acceptorlike ones.The self-compensation has been found mainly to originate from zinc interstitial and oxygen vacancy related donors.While the acceptor-like defect,zinc vacancy,is thought to be linked to complex shallow acceptors in group-VA doped ZnO.Therefore,the understanding of the behaviors of the native defects is critical to the realization of high-efficient p-type conduction.Meanwhile,some novel ideas have been extensively proposed,like double-acceptor co-doping,acceptor doping in iso-valent element alloyed ZnO,etc.,and have opened new directions for p-type doping.Some of the approaches have been positively judged.In this article,we thus review the recent(2011-now) research progress of the native defects and p-type doping approaches globally.We hope to provide a comprehensive overview and describe a complete picture of the research status of the p-type doping in ZnO for the reference of the researchers in a similar area.
基金funded by Nippon Sheet Glass Corp.the Hitachi Foundation+4 种基金the Malaysia-Japan International Institute of TechnologyUniversiti Teknologi Malaysiathe Malaysian Ministry of ScienceTechnology and Innovationthe Malaysian Ministry of Education through various research Grants
文摘The effects of the supporting reagents hexamethylenetetramine(HMTA)and potassium chloride(KCl)mixed in zinc nitrate hexahydrate(Zn(NO3)2 6H2O)on the morphological,structural,and optical properties of the resulting Zn O nanostructures electrodeposited on graphene/glass substrates were investigated.The supporting reagent HMTA does not increase the density of nanorods,but it does remarkably improve the smoothness of the top edge surfaces and the hexagonal shape of the nanorods even at a low temperature of 75°C.Hydroxyl(OH-)ions from the HMTA suppress the sidewall growth of non-polar planes and promote the growth of Zn O on the polar plane to produce vertically aligned nanorods along the c axis.By contrast,the highly electronegative chlorine(Cl-)ions from the supporting reagent KCl suppress the growth of Zn O on the polar plane and promote the growth on non-polar planes to produce vertical stacking nanowall structures.HMTA was found to be able to significantly improve the crystallinity of the grown Zn O structures,as indicated by the observation of much lower FWHM values and a higher intensity ratio of the emission in the UV region to the emission in the visible region.Equimolar mixtures of Zn(NO3)2 6H2O and the supporting reagents HMTA and KCl seem to provide the optimum ratio of concentrations for the growth of high-density,uniform Zn O nanostructures.The corresponding transmittances for such molar ranges are approximately 55–58%(HMTA)and 63–70%(KCl),which are acceptable for solar cell and optoelectronic devices.
文摘The determination of trace impurities in high purity zinc oxide by high resolution inductively coupled plasma mass spectrometry ( HR-ICP-MS ) was investigated. To overcome some poteutially problematic spectral iuterference, measurements were acquired in both middle and high resolution modes. The matrix effects due to the presence of excess HCl and zinc were evaluated. The optimum conditions for the determination were tested and discussed. The standard addition method was employed for quantitative analysis. The detection limits ranged from 0.02μg/ g to 6 μg/ g depending on the elements. The experimental resalts for the determination of Na, Mg, Ca, Cr, Mn, Fe, Co, Ni, Cu, Mo, Cd, Sb and Pb in several high purity zinc oxide powders were presented.
文摘The aim of this study was to synthesize zinc borate using zinc oxide, reference boric acid, and reference zinc borate (reference ZB) as the seed, and to investigate the effects of modifying agents and reaction parameters on the hydrophobicity and yield, respectively. The reaction parameters include reaction time (1-5 h), reactant ratio (H3BO3/ZnO by mass: 2-5), seed ratio (seed crystal/(H3BO3+ZnO) by mass: 0-2wt%), reaction temperature (50-120~C), cooling temperature (10-80~C), and stirring rate (400-700 r/min); the modifying agents involve propylene glycol (PG, 0-6wt%), kerosene (lwt%-6wt%), and oleic acid (OA, lwt%-6wt%) with solvents (isopropyl alcohol (IPA), ethanol, and methanol). The results of reaction yield obtained from either magnetically or mechanically stirred systems were compared. Zinc borate produced was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and contact angle tests to identify the hydrophobicity. In conclusion, zinc borate is synthesized successfully under the optimized reaction conditions, and the different modifying agents with various solvents affect the hydrophobicity of zinc borate.
文摘BACKGROUND Gastric cancer(GC)is a common malignancy that results in a high rate of cancerrelated mortality.Cisplatin(DDP)-based chemotherapy is the first-line clinical treatment for GC therapy,but chemotherapy resistance remains a severe clinical challenge.Zinc oxide nanoparticle(ZnO-NP)has been identified as a promising anti-cancer agent,but the function of ZnO-NP in GC development is still unclear.AIM To explore the effect of ZnO-NP on chemotherapy resistance during GC progression.METHODS ZnO-NP was synthesized,and the effect and underlying mechanisms of ZnO-NP on the malignant progression and chemotherapy resistance of GC cells were analyzed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide(MTT)assays,colony formation assays,transwell assays,wound healing assays,flow cytometry,and Western blot analysis in GC cells and DDP-resistant GC cells,and by tumorigenicity analyses in nude mice.RESULTS Our data revealed that ZnO-NP was able to inhibit proliferation,migration,and invasion and induce apoptosis of GC cells.Meanwhile,ZnO-NP significantly reduced the half maximal inhibitory concentration(IC50)of DDP for the inhibition of cell proliferation of DDP-resistant SGC7901/DDP cell lines.Autophagy was increased in DDP-resistant GC cells,as demonstrated by elevated light chain 3-like protein 2(LC3II)/LC3I and Beclin-1 expression and repressed p62 expression in SGC7901/DDP cells compared to SGC7901 cells.Mechanically,ZnO-NP inhibited autophagy in GC cells and treatment with DDP induced autophagy,which was reversed by ZnO-NP.Functionally,ZnO-NP attenuated the tumor growth of DDP-resistant GC cells in vivo.CONCLUSION We conclude that ZnO-NP alleviates the chemoresistance of GC cells by inhibiting autophagy.Our findings present novel insights into the mechanism by which ZnO-NP regulates the chemotherapy resistance of GC.ZnO-NP may serve as a potential therapeutic candidate for GC treatment.The potential role of ZnO-NP in the clinical treatment of GC needs clarification in future investigations.
文摘We present in this paper a study of the structural and photoluminescence (PL) properties of terbium (Tb) doped zinc oxide (ZnO) nanoparticles synthesized by a simple low temperature chemical precipitation method, using zinc acetate and terbium nitrate in an isopropanol medium with diethanolamine (DEA) as the capping agent at 60 ℃. The as-prepared samples were heat treated and the PL of the annealed samples were studied. The prepared nanoparticles were characterized with X-ray diffraction (XRD). The XRD patterns show the pattern of typical ZnO nanoparticles and correspond with the standard XRD pattern given by JCPDS card No. 36-1451, showing the hexagonal phase structure. The PL intensity was enhanced due to Tb^3+ doping, and it decreased at higher concentrations of Tb^3+ doping after reaching a certain optimum concentration. The PL spectra of Tb^3+ doped samples exhibited blue, bluish green, and green emissions at 460 nm (5^D3 - 7^F3), 484 nm (5^D4 - 7^F6), and 530 nm (5^D4 - 7^F5), respectively, which were more intense than the emissions for the undoped ZnO sample. Based on the results, an energy level schematic diagram was proposed to explain the possible electron transition processes.