The hot deformation behavior and workability of pre-extruded ZK60A magnesium alloy were investigated by compression tests in the temperature range of 250-450 ℃and the strain rate range of 0.001-10 s 1. The constituti...The hot deformation behavior and workability of pre-extruded ZK60A magnesium alloy were investigated by compression tests in the temperature range of 250-450 ℃and the strain rate range of 0.001-10 s 1. The constitutive equation for the pre-extruded ZK60A alloy can be described by hyperbolic sine function. Processing maps were constructed from true strains of -0.2 to -0.8. The alloy experienced complete dynamic recrystallization （DRX） and showed good workability in the temperature range of 300-400 ℃ and the strain rate range of 0.01-0.001 s-Z, where hot working in pre-extruded ZK60A, such as forging, can be carried out. For large deformation to true strain of over -0.5, strain rates above 0.1 s-1 are not recommended at all temperatures, where flow instability such as local strain concentration, twinning deformation, abnormal grain growth, micro-cracks, and shear fracture were observed. Climb-controlled dislocation creep dominates both the plastic deformation and nucleation of DRX of the pre-extruded ZK60A magnesium alloy.展开更多
基金Projects(51171113,51301107) supported by the National Natural Science Foundation of China
文摘The hot deformation behavior and workability of pre-extruded ZK60A magnesium alloy were investigated by compression tests in the temperature range of 250-450 ℃and the strain rate range of 0.001-10 s 1. The constitutive equation for the pre-extruded ZK60A alloy can be described by hyperbolic sine function. Processing maps were constructed from true strains of -0.2 to -0.8. The alloy experienced complete dynamic recrystallization （DRX） and showed good workability in the temperature range of 300-400 ℃ and the strain rate range of 0.01-0.001 s-Z, where hot working in pre-extruded ZK60A, such as forging, can be carried out. For large deformation to true strain of over -0.5, strain rates above 0.1 s-1 are not recommended at all temperatures, where flow instability such as local strain concentration, twinning deformation, abnormal grain growth, micro-cracks, and shear fracture were observed. Climb-controlled dislocation creep dominates both the plastic deformation and nucleation of DRX of the pre-extruded ZK60A magnesium alloy.
