Modeling and optimization of a multi-carrier renewable energy system for zero-energy consumption buildings

For the carbon-neutral,a multi-carrier renewable energy system(MRES),driven by the wind,solar and geothermal,was considered as an effective solution to mitigate CO2emissions and reduce energy usage in the building sector.A proper sizing method was essential for achieving the desired 100%renewable energy system of resources.This paper presented a bi-objective optimization formulation for sizing the MRES using a constrained genetic algorithm(GA)coupled with the loss of power supply probability(LPSP)method to achieve the minimal cost of the system and the reliability of the system to the load real time requirement.An optimization App has been developed in MATLAB environment to offer a user-friendly interface and output the optimized design parameters when given the load demand.A case study of a swimming pool building was used to demonstrate the process of the proposed design method.Compared to the conventional distributed energy system,the MRES is feasible with a lower annual total cost(ATC).Additionally,the ATC decreases as the power supply reliability of the renewable system decreases.There is a decrease of 24%of the annual total cost when the power supply probability is equal to 8%compared to the baseline case with 0%power supply probability.

Improved method for zero-energy mode suppression in peridynamic correspondence model

The peridynamic correspondence model provides a general formulation to incorporate the classical local model and,therefore,helps to solve mechanical problems with discontinuities easily.But it suffers from zero-energy mode instability in numerical implementation due to the approximation of deformation gradient tensor.To suppress zero-energy modes,previous stabilized methods were generally more based on adding a supplemental force state derived from bond-based peridynamic theory,which requires a bond-based peridynamic micro-modulus.In this work,we present an improved stabilized method where the stabilization force state is derived directly from the peridynamic correspondence model.Hence,the bond-based peridynamic micro-modulus is abandoned.This improved method needs no extra constant to control the magnitude of stabilization force state and it is suitable for either isotropic or anisotropic materials.Several examples are presented to demonstrate its performance in simulating crack propagation,and numerical results show its efficiency and effectiveness.

Orthogonal basic deformation mode method for zero-energy mode suppression of hybrid stress elements

A set of basic deformation modes for hybrid stress finite elements are directly derived from the element displacement field. Subsequently, by employing the so-called united orthogonal conditions, a new orthogonalization method is proposed. The result- ing orthogonal basic deformation modes exhibit simple and clear physical meanings. In addition, they do not involve any material parameters, and thus can be efficiently used to examine the element performance and serve as a unified tool to assess different hybrid elements. Thereafter, a convenient approach for the identification of spurious zero-energy modes is presented using the positive definiteness property of a flexibility matrix. More- over, based on the orthogonality relationship between the given initial stress modes and the orthogonal basic deformation modes, an alternative method of assumed stress modes to formulate a hybrid element free of spurious modes is discussed. It is found that the orthogonality of the basic deformation modes is the sufficient and necessary condition for the suppression of spurious zero-energy modes. Numerical examples of 2D 4-node quadrilateral elements and 3D 8-node hexahedral elements are illustrated in detail to demonstrate the efficiency of the proposed orthogonal basic deformation mode method.

Zero-energy modes in serially coupled double quantum dots

We investigate symmetrically coupled double quantum dots via the hierarchical equations of motion method and propose a novel zero-energy mode(ZEM) at a temperature above the spin singlet–triplet transition temperature. Owing to the resonance of electron quasi-particle and hole quasi-particle, ZEM has a peak at ω = 0 in the spectral density function.We further examine the effect of the magnetic field on the ZEM, where an entanglement of spin and charge has been determined;therefore, the magnetic field can split the ZEM in the spectra.

Simulation Technology of Environmental Impacts by Zero-energy Residential Buildings Based on Emergy Analysis Method

This paper presents a simulation technology of environmental impact for the building. By emergy analysis method,emergy costs of building( or construction engineering) can be calculated in the life cycle. It includes the engineering cost, environmental cost and social cost of building. Through integrating GIS technology with multi-agent technology,life cycle substance and energy metabolism of building( construction engineering) can be simulated and their environmental influence can be dynamically displayed. Based on the case study of entries works‘Sunny Inside'by Xiamen University in 2013 China International Solar Decathlon Competition,we discovered the changing pattern of surrounding environmental impact from waste streams of the zero-energy building and ordinary construction. The simulation results verified and showed the Odum principles of maximum power. This paper provides a new research perspective and integration approach for the environmental impact assessment in building and construction engineering. The result will help decision-making in design and construction engineering scheme.

Infinite Freedom of Space-Time for Zero-Energy-Entity in Quantum Mechanics

Zero-energy state is investigated by taking infinitesimal energy and observing its uncertainty in space-time, adopting quantum mechanics. In this paper, the uncertainty in conventional quantum mechanics is found to be interpreted as freedom in space-time, which results in possibility of time travel and space transition of the zero-energy state, which could be information or mind. The wave function of a physical system composed of multiple particles or wave-packets is examined and found that it can be arbitrarily changed by grouping by observers. It leads to an idea that even infinitesimal energy or wave-packets in a heavy physical system may separately exist and it has the infinite freedom of space-time.

Comprehensive evaluation and analysis of a nearly zero-energy building heating system using a multi-source heat pump in severe cold region

The integrated application of multi-energy coupled technology in nearly zero-energy building(NZEB)is promising from the perspective of low-carbon development to achieve the goal of net zero energy.PVT(photovoltaic/thermal),air,and ground sources were combined organically to establish an experimental platform of a multi-source heat pump(MSHP)system,which can realize flexible switching of multi-energy sources.The paper presents the analytical hierarchy process and fuzzy comprehensive evaluation method to comprehensively evaluate the five modes of the MSHP system with regard to energy,economic and environmental benefits.The results indicate that the waste heat of the PVT cavity can improve the coefficient of performance of the heat pump unit(COP)by approximately 8.0%.The initial investment in air source heat pump(ASHP)modes is lower than that of a coal-powered system.The ground source heat pump(GSHP)modes have high stability and their payback period is 8.81–10.66 years.The photovoltaic/thermal-dual source heat pump(PVT-DSHP)mode presents the most appropriate system applied in the NZEB in severe cold region,followed by the DSHP,GSHP,ASHP,and PVT-ASHP mode.When compared with other modes,COP,annual saving cost,carbon dioxide emission reduction,and comprehensive value of the PVT-DSHP mode have improved by 7.07%–29.57%,2.21%–23.88%,3.38%–14.83%,and 27.91%–52.62%,respectively.The study provides important insights into the practical application and sustainable development of multi-energy coupled systems in the NZEB in severe cold region.

The Thermal Comfort and Hygrothermal Performance of the First Certified Passive House in Estonia

This study presents the thermal comfort and hygrothermal performance of building envelope of the first certified passive single-family detached house in Estonia.Temperature and humidity conditions were measured from different rooms and building envelopes.This article presents analysis of measurement results during the first year after construction.Results showed high room temperature,achieved mainly due to large windows with southern exposure and the small heat loss of the building envelope.High indoor temperature decreased the indoor RH(relative humidity)to quite low levels.Even the RH was low,the moisture excess was high indicating that the design of PH(passive houses)indoor humidity loads cannot be decreased.Humidity in the externally insulated cross-laminated timber panels was observed to be high,caused by drying out of the constructional moisture and the high diffusion resistance of the wood fibre sheathing board.That caused water vapour condensation and risk for mould growth.In conclusion,while planning buildings with high-energy efficiency,more focused attention should be paid to the performance of the building service systems and moisture safety already in the preliminary stages of design.

Analysis of the effect of passive measures on the energy consumption and zero-energy prospects of residential buildings in Pakistan

Climate change can adversely impact the thermal comfort and energy efficiency of the buildings stock. The South Asian countries are particularly vulnerable to the adverse impacts of climate change specially in the form of rising temperatures and increasing frequency of heat waves. The passive building design measures can be useful in mitigating and adapting to the climate change by increasing energy efficiency and reducing greenhouse gas (GHG) emissions. In this study various passive climate change adaptation measures (PCAMs) have been used individually and in form of combinations in order to analyze their impact on the energy efficacy of residential buildings in Pakistan. It has been found that the natural ventilation and front green wall are the most efficient options for reducing the overall energy consumption. By implementation of these PCAMs, cooling demand can be decreased by 27.75% while heating demand can be reduced by 35%. Secondly, the prospect of net zero-energy building and reduced CO2 emissions are also studied. It has been shown that building can achieve net-zero energy on an annual basis at every orientation and it can attain the status of nearly zero-energy building on a monthly basis. Moreover, emitted CO2 can be reduced by 31% by using the renewable energy.

Carbon Footprint Analysis of Buildings Based on LCA Theory Under Carbon Neutrality Goals:Taking the 3rd China International Solar Decathlon Competition as an Example

This paper focuses on the design of residential buildings oriented to the efficient use of solar energy,and selects the entries HUI HOUSE of Hefei University of Technology and Lille I University of France in the 3rd China International Solar Decathlon China Competition,based on the theory of the life cycle assessment(LCA)of buildings,and analyzes the carbon footprint from four aspects:building materials production and transportation stage,building construction stage,building operation stage,and building demolition stage.Through the calculation of the carbon footprint of buildings,the socio-economic benefits of HUI HOUSE in carbon reduction were analyzed;the result of the calculation was that HUI HOUSE achieved carbon neutrality in the ninth year,and continued carbon reduction after that,contributing a cumulative total of 947.54 tons of carbon negative in the life cycle of buildings.

DEFORMATION RIGIDITY OF ASSUMED STRESS MODES IN HYBRID ELEMENTS

The new methods to determine the zero-energy deformation modes in the hybrid elements and the zero-energy stress modes in their assumed stress fields are presented by the natural deformation modes of the elements. And the formula of the additional element deformation rigidity due to additional mode into the assumed stress field is derived. Based on, it is concluded in theory that the zero-energy stress mode cannot suppress the zero-energy deformation modes but increase the extra rigidity to the nonzero-energy deformation modes of the element instead. So they should not be employed to assume the stress field. In addition, the parasitic stress modes will produce the spurious parasitic energy and result the element behaving over rigidity. Thus, they should not be used into the assumed stress field even though they can suppress the zero-energy deformation modes of the element. The numerical examples show the performance of the elements including the zero-energy stress modes or the parasitic stress modes.

The Light-Dark Dual Universe for the Big Bang and Dark Energy

In the proposed light-dark dual universe, the light universe is the observable universe with light and kinetic energy that fueled the Big Bang, and the dark universe without light and kinetic energy has been observed as dark energy since about 9 billion years after the Big Bang. The light-dark dual universe started from the zero-energy universe through the four-stage cyclic transformation. Emerging from the zero-energy universe, the four-stage transformation consists of the 11D (dimensional) positive-negative energy dual membrane universe, the 10D positive-negative energy dual string universe, the 10D positive-negative energy dual particle universe, and the 4D (light)-variable D (dark) positive-negative energy dual particle asymmetrical universe. The transformation can then be reversed back to the zero-energy universe through the reverse four-stage transformation. The light universe is an observable four-dimensional universe started with the inflation and the Big Bang, and the dark universe is a variable dimensional universe from 10D to 4D. The dark universe could be observed as dark energy only when the dark universe turned into a four-dimensional universe. The four-stage transformation explains the four force fields in our universe. The theoretical calculated percentages of dark energy, dark matter, and baryonic matter are 72.8. 22.7, and 4.53, respectively, in nearly complete agreement with observed 72.8, 22.7, and 4.56, respectively. According to the calculation, dark energy started in 4.47 billion years ago in agreement with the observed 4.71 ± 0.98 billion years ago. The zero-energy cyclic universe is based on the space-object structures.

A NEW HYBRID QUADRILATERAL FINITE ELEMENT FOR MINDLIN PLATE

In this paper a new quadrilateral plate element concerning the effect of transverse shear strain has been presented. It is derived from the hybrid finite element model based on the principles of virtual work. The outstanding advantage of this element is to use more rational trial functions of the displacements. For this reason, every variety of plate deformation can be simulated really whilc the least degrees of freedom is employed.A wide range of numerical tests was conducted and the results illustrate that this element has a very wide application scope to the thickness of plates and satisfactory accuracy can be obtained by coarse mesh for all kinds of examples.

The Benefits of Integrated Methods in PV Making to Promote Their Efficiency and Achieve Low-Cost Modules

Active systems, such as solar thermal and photovoltaic offer a great potential in reducing of fuel energy consumption. To improve the sustainability of buildings, one of the challenges is to address the role of renewable energies. Today, the photovoltaic installations play an important role in creating solar renewable energy. They create 2000 MW electrical energy per year and its annual global sales grown to approximately 5.6 GWp. This paper presents a general overview on a serious effort to produce PV panels that could provide cheaper solar power. It also focuses on short background of PV. Furthermore, thin film technology benefits, the method of the most absorbing of solar spectrum and the method of solar concentration and the advantages of these systems are presented. Ultimately, a new high concentration PV power system will be assessed.

Modeling and management performances of distributed energy resource for demand flexibility in Japanese zero energy house

Zero-energy buildings(ZEBs)can contribute to decarbonizing building energy systems,while the energy mismatch between energy demand and on-site stochastic generation in ZEBs increases the need for energy flexibility.This study proposed mixed-integer linear programming energy management schemes for optimizing the flexible scheduling of distributed energy resources,including battery energy storage,heat pump,and building thermal mass as a passive thermal energy storage system.With optimally designed objectives,this study used case studies to evaluate the flexibility potential provided by the demand-side management,considering dynamic characteristics of the process.The results showed that the proposed demand-side management for battery storage offers significant potential in increasing photovoltaic(PV)self-consumption and reducing operational costs.Cost reduction ratios of flexible dispatch of combined PV and battery storage systems exceed 15%.Flexible coupling of PV and heat pump systems for meeting hot water demand can reduce energy cost by more than 20%.The flexible coupling of the heat pump and PV system also had a significant impact on the power consumption pattern of domestic heat pumps,the load-shifting potential highly depends on the available PV generation and hot water demand.The optimal trade-off between thermal energy use and thermal comfort violation may not reduce the total energy used for space heating,the increased PV consumption helped reduce grid imports.The study provides insights into the energy flexibility behavior and efficiency of the proposed demand-side management for ZEBs,which is expected to provide guidelines for exploring demand-side flexibility.