Relocation of the 1998 Zhangbei-Shangyi earthquake sequence using the double difference earthquake location algorithm

On January 10, 1998, at 11h50min Beijing Time (03h50min UTC), an earthquake of ML=6.2 occurred in the border region between the Zhangbei County and Shangyi County of Hebei Province. This earthquake is the most significant event to have occurred in northern China in the recent years. The earthquake-generating structure of this event was not clear due to no active fault capable of generating a moderate earthquake was found in the epicentral area, nor surface ruptures with any predominate orientation were observed, no distinct orientation of its aftershock distribution given by routine earthquake location was shown. To study the seismogenic structure of the Zhangbei- Shangyi earthquake, the main shock and its aftershocks with ML3.0 of the Zhangbei-Shangyi earthquake sequence were relocated by the authors of this paper in 2002 using the master event relative relocation technique. The relocated epicenter of the main shock was located at 41.145癗, 114.462癊, which was located 4 km to the NE of the macro-epicenter of this event. The relocated focal depth of the main shock was 15 km. Hypocenters of the aftershocks distributed in a nearly vertical plane striking 180~200 and its vicinity. The relocated results of the Zhangbei-Shangyi earthquake sequence clearly indicated that the seismogenic structure of this event was a NNE-SSW-striking fault with right-lateral and reverse slip. In this paper, a relocation of the Zhangbei-Shangyi earthquake sequence has been done using the double difference earthquake location algorithm (DD algorithm), and consistent results with that obtained by the master event technique were obtained. The relocated hypocenters of the main shock are located at 41.131癗, 114.456癊, which was located 2.5 km to the NE of the macro-epicenter of the main shock. The relocated focal depth of the main shock was 12.8 km. Hypocenters of the aftershocks also distributed in a nearly vertical N10E-striking plane and its vicinity. The relocated results using DD algorithm clearly indicated that the seismogenic structure of this event was a NNE-striking fault again.

Inter-provincial Differences in Rice Multi-cropping Changes in Main Double-cropping Rice Area in China: Evidence from Provinces and Households

Since the early 1980 s, the multi-cropping index for rice has decreased significantly in main double-cropping rice area in China, which is the primary double-cropping rice(DCR) production area. This decline may bring challenges to food security in China because rice is the staple food for more than 60% of the Chinese population. It has been generally recognized that rapidly rising labor costs due to economic growth and urbanization in China is the key driving force of the ‘double-to-single' rice cropping system adaption. However, not all provinces have shown a dramatic decline in DCR area, and labor costs alone cannot explain this difference. To elucidate the reasons for these inter-provincial distinctions and the dynamics of rice cropping system adaption, we evaluated the influencing factors using provincial panel data from 1980 to 2015. We also used household survey data for empirical analysis to explore the mechanisms driving differences in rice multi-cropping changes. Our results indicated that the eight provinces in the study can be divided into three spatial groups based on the extent of DCR area decline, the rapidly-declining marginal, core, and stable zones. Increasing labor cost due to rapid urbanization was the key driving force of rice cropping system adaption, but the land use dynamic vary hugely among different provinces. These differences between zones were due to the interaction between labor price and accumulated temperature conditions. Therefore, increasing labor costs had the greatest impact in Zhejiang, Anhui, and Hubei, where the accumulated temperature is relatively low and rice multi-cropping index declined dramaticly. However, labor costs had little impact in Guangdong and Guangxi. Differences in accumulated temperature conditions resulted in spatially different labor demands and pressure on households during the busy season. As a result, there have been different profits and rice multi-cropping changes between provinces and zones. Because of these spatial differences, regionally appropriate policies that provide appropriate subsidies for early rice in rapidly-declining marginal zone such as Zhejiang and Hubei should be implemented. In addition, agricultural mechanization and the number of agricultural workers have facilitated double-cropping; therefore, small machinery and agricultural infrastructure construction should be further supported.

A new control method based on the lattice hydrodynamic model considering the double flux difference

A new feedback control method is derived based on the lattice hydrodynamic model in a single lane. A signal based on the double flux difference is designed in the lattice hydrodynamic model to suppress the traffic jam. The stability of the model is analyzed by using the new control method. The advantage of the new model with and without the effect of double flux difference is explored by the numerical simulation. The numerical simulations demonstrate that the traffic jam can be alleviated by the control signal.

Double Difference Location of the Mainshock and Aftershocks of the Hutubi MS6.2 Earthquake That Occurred on December 8,2016

The mainshock and aftershocks of the Hutubi M_S6.2 earthquake on December 8,2016 were relocated by applying the double difference method, and we relocated 477 earthquakes in the Hutubi region. The earthquake relocation results show that the aftershocks are distributed in the east-west direction towards the north side of the southern margin of the Junggar Basin fault,and are mainly distributed in the western region of the mainshock. The distance between the mainshock after relocation and the southern margin of the Junggar Basin fault is obviously shortened. Combined with the focal mechanism and the spatial distribution of the mainshock and aftershocks,it is inferred that the southern margin of the Junggar Basin fault is the main seismogenic structure of the Hutubi earthquake.

Enhancing the crop yield through capacity building programs: Application of double difference method for evaluation of drip capacity building program in Tamil Nadu State, India

A capacity building program on drip irrigation (TNDRIP) was undertaken in certain regions of the Indian State of Tamil Nadu during 2009-2010. An assessment of the impact of the program in terms of effective use of drip irrigation and increased crop yields was made in 2011 by applying double difference method (a combination of both with and without and before and after approaches). The results had indicated that the drip capacity building program resulted in a yield increase of 2.5 t/ha for Banana 1, 1.9 t/ha for Banana 2, 3.3 t/ha for sugarcane and 0.3 t/ha for turmeric. The conventional method using the before and after situations had shown a yield increase of 4.3 t/ha for Banana 1, 12.1 t/ha for Banana 2, 40.6 t/ha for sugarcane and 2.6 t/ha for turmeric. The conventional approach is highly upward biased in estimating the impact of the drip capacity building program and thus the double difference method will be an appropriate method to evaluate the impact of the programs that involve both with and without as well as before and after situations.

Relocation of the M_S≥2.0 Earthquakes in the Northern Tianshan Region, Xinjiang, Using the Double-Difference Earthquake Relocation Algorithm

We applied the double-difference earthquake rdocation algorithm to 1348 earthquakes with Ms ≥2.0 that occurred in the northern Tianshan region, Xinjiang, from April 1988 to June 2003, using a total of 28701 P- and S-wave arrival times recorded by 32 seismic stations in Xinjiang. Aiming to obtain most of these Ms ≥ 2.0 earthquakes relocations, and considering the requirements of the DD method and the condition of data, we added the travel time data of another 437 earthquakes with 1.5 ≤ Ms 〈 2.0. Finally, we obtained the relocation results for 1253 earthquakes with Ms ≥2.0, which account for 93 % of all the 1348 earthquakes with Ms ≥ 2.0 and includes all the Ms ≥ 3.0 earthquakes. The reason for not relocating the 95 earthquakes with 2.0 ≤ Ms 〈 3.0 is analyzed in the paper. After relocation, the RMS residual decreased from 0.83s to 0.14s, the average error is 0.993 km in E-W direction, 1.10 km in N- S direction, and 1.33 km in vertical direction. The hypocenter depths are more convergent than before and distributed from 5 km to 35 kin, with 94% being from 5km to 35 kin, 68.2% from 10 km to 25 kin. The average hypocenter depth is 19 kin.

Double-difference tomography of P- and S-wave velocity structure beneath the western part of Java, Indonesia

West Java in the western part of the Sunda Arc has a relatively high seismicity due to subduction activity and faults.In this study,double-difference tomography was used to obtain the 3D velocity tomograms of P and S waves beneath the western part of Java.To infer the geometry of the structure beneath the study area,precise earthquake hypo・center determination was first performed before tomographic imaging.For this,earthquake waveform data were extracted from the regional Meteorological,Climatological,Geophysical Agency(BMKG)network of Indonesia from South Sumatra to Central Java.The P and S arrival times for about 1,000 events in the period April 2009 to July 2016 were selected,the key features being events of magnitude>3,azimuthal gap<210°and number of phases>8.A nonlinear method using the oct-tree sampling algorithm from the NonLinLoc program was employed to determine the earthquake hypocenters.The hypocenter locations were then relocated using double-difference tomography(tomoDD).A significant reduction of travel-time(root mean square basis)and a better clustering of earthquakes were achieved which correlated well with the geological structure in West Java.Double-difference tomography was found to give a clear velocity structure,especially beneath the volcanic arc area,i.e.,under Mt Anak Krakatau,Mt Salak and the mountains complex in the southern part of West Java.Low velocity anomalies for the P and S waves as well as the vp/vs ratio below the volcanoes indicated possible partial melting of the upper mantle which ascended from the subducted slab beneath the volcanic arc.

Application of the Double-difference Relocation Method Combined with Waveform Cross-correlation on the Three Gorges Reservoir Seismicity

In this paper,we use the double difference location method based on waveform crosscorrelation algorithm for precise positioning of the Three Gorges Reservoir( TGR)earthquakes and analysis of seismic activity. First,we use the bi-spectrum cross-correlation method to analyze the seismic waveform data of TGR encrypted networks from March,2009 to December,2010,and evaluate the quality of waveform cross-correlation analysis.Combined with the waveform cross-correlation of data obtained, we use the double difference method to relocate the earthquake position. The results show that location precision using bi-spectrum verified waveform cross-correlation data is higher than that by using other types of data,and the mean 2 sig-error in EW,NS and UD are 3.2 m,3.9 m and 6.2 m,respectively. For the relocation of the Three Gorges Reservoir earthquakes,the results show that the micro-earthquakes along the Shenlongxi river in the Badong reservoir area obviously show the characteristics of three linear zones with nearly east-west direction,which is in accordance with the small faults and carbonate strata line of the neotectonic period,revealing the reservoir water main along the underground rivers or caves permeated and induced seismic activity. The stronger earthquakes may have resulted from small earthquakes through the active layers.

Reinforced temperature control of a reactive double dividing-wall distillation column

The mass and thermal coupling makes the control of the reactive double dividing-wall distillation column(R-DDWDC) an especially challenging issue with a highly interactive nature. With reference to the separation of an ideal endothermic quaternary reversible reaction with the most unfavorable ranking of relative volatilities(A + B ■ C + D with α_(A)>α_(C)>α_(D)>α_(B)), the operation rationality of the R-DDWDC is studied in this contribution. The four-point single temperature control system leads to great steady-state discrepancies in the compositions of products C and D and the reason stems essentially from the failure in keeping strictly the stoichiometric ratio between reactants A and B. A temperature plus temperature cascade control scheme is then employed to reinforce the stoichiometric ratio control and helps to secure a substantial abatement in the steady-state discrepancies. A temperature difference plus temperature cascade control scheme is finally synthesized and leads even to better performance than the most effective double temperature difference control scheme. These outcomes reveal not only the operation feasibility of the R-DDWDC but also the general significance of the proposed temperature difference plus temperature cascade control scheme to the inferential control of any other complicated distillation columns.

Bubble translation driven by pulsation in a double-bubble system

The pulsation and translation of two cavitation bubbles are studied numerically in sound field. The results show that bubbles' pulsation driven by the sound makes them translate. Different pulsations lead to different translations. Two bubbles will be mutually attractive to each other if they pulsate in phase, while they will be repulsive if out of phase. Furthermore,the secondary Bjerknes force for small phase difference is attractive, and it becomes repulsive for other phase differences up to π phase difference due to the nonlinear effect, although the attractive strength between two bubbles is much larger than the repulsive strength. Finally, one bubble pulsation and the other bubble stationary make the bubbles repel each other.

Linear Track Estimation Using Double Pulse Sources for Near-Field Underwater Moving Target

The double pulse sources （DPS） method is presented for linear track estimation in this work. In the field of noise identification of underwater moving target, the Doppler will distort the frequency and amplitude of the radiated noise. To eliminate this, the track estimation is necessary. In the DPS method, we first estimate bearings of two sinusoidal pulse sources installed in the moving target through baseline positioning method. Meanwhile, the emitted and recorded time of each pulse are also acquired. Then the linear track parameters will be achieved based on the geometry pattern with the help of double sources spacing. The simulated results confirm that the DPS improves the performance of the previous double source spacing method. The simulated experiments were carried out using a moving battery car to further evaluate its performance. When the target is 40-60m away, the experiment results show that biases of track azimuth and abeam distance of DPS are under 0.6° and 3.4m, respectively. And the average deviation of estimated velocity is around 0.25m/s.

Double-row repair of rotator cuff tears: Comparing tendon contact area between techniques

BACKGROUND In rotator cuff repair surgery,the double-row technique is widely performed.Studies have shown that with increased contact area and pressure between tendon and bone interface,better healing is promoted.AIM To assess the different suture configurations with the double-row technique and how this influences the contact area of the rotator cuff tendon to bone.METHODS This was a controlled laboratory study where identical tears were created in 24 fresh porcine shoulders over a 1.5 cm×2.5 cm infraspinatus insertion footprint.Double-row repair techniques,with 3 to 4-suture anchors in different configurations(2 medial,2 lateral vs 2 medial,1 lateral vs 1 medial,2 lateral),were employed for three control groups.Each group consisted of eight shoulders with identical repair configurations.Footprint contact areas of the repaired tendon against the tuberosity were determined using pressure sensitive Fujifilm placed between the tendon and tuberosity.RESULTS The mean contact area between tendon and insertion footprint from the imprinted Fujifilm was obtained using computer software.The contact area measured from a standard 4-suture anchor double row repair was 75.1±9.3 mm2,whereas areas obtained for the 2 lateral-1 medial and 2 medial-1 lateral anchor configurations were 72.9±5.2 mm2 and 75.0±4.9 mm2 respectively.No statistical significance was noted between the three groups.CONCLUSION In the technique of double-row repair,using a 3-suture anchor configuration may offer a non-inferior alternative to the standard 4-anchor construct in terms of efficacy.This may also result in overall cost reduction and shorter surgical time.

Numerical simulation for 2D double-diffusive convection(DDC) in rectangular enclosures based on a high resolution upwind compact streamfunction model Ⅰ: numerical method and code validation

A high resolution upwind compact streamfunction numerical algorithm for two-dimensional(2D)double-diffusive convection(DDC)is developed.The unsteady Navier-Stokes(N-S)equations in the streamfunction-velocity form and the scalar temperature and concentration equations are used.An optimized third-order upwind compact(UCD3 opt)scheme with a low dispersion error for the first derivatives is utilized to approximate the third derivatives of the streamfunction in the advection terms of the N-S equations and the first derivatives in the advection terms of the scalar temperature and concentration equations.The remaining first derivatives of the streamfunction(velocity),temperature,and concentration variables used in the governing equations are discretized by the fourth-order compact Pade(SCD4)schemes.With the temperature and concentration variables and their approximate values of the first derivatives obtained by the SCD4 schemes,the explicit fourth-order compact schemes are suggested to approximate the second derivatives of temperature and concentration in the diffusion terms of the energy and concentration equations.The discretization of the temporal term is executed with the second-order Crank-Nicolson(C-N)scheme.To assess the spatial behavior capability of the established numerical algorithm and verify the developed computer code,the DDC flow is numerically solved.The obtained results agree well with the benchmark solutions and some accurate results available in the literature,verifying the accuracy,effectiveness,and robustness of the provided algorithm.Finally,a preliminary application of the proposed method to the DDC is carried out.

Seismic imaging of the double seismic zone in the subducting slab in Northern Chile

Double seismic zones are commonly observed in the subducting slabs in a global scale,serving as ideal examples for studying the seismogenetic mechanism of the intermediate-depth earthquakes.In this study,we relocate earthquakes and determine seismic velocity models using the double-difference seismic tomography method in the northern Chile subduction zone where a double seismic zone exists.The results suggest that the double seismic zone in northern Chile is located at about 50-140 km depth,with an interval of approximately 20 km between the two zones.The upper seismic zone is characterized by relatively low Vp(~7.8-8.0 km/s),low Vs(~4.4-4.5 km/s)and high Vp/Vs(~1.85)above the depth of~90 km,while the region below~90 km is distinguished by relatively high Vp(~8.2 km/s),high Vs(~4.8 km/s)and slightly high Vp/Vs(~1.75),which may be related to a series of dehydration reactions of hydrous minerals in the subducted oceanic crust.In comparison,the lower seismic zone is featured by the anomaly of low Vp/Vs(~1.7),although some local areas may consist of relatively high Vp/Vs values(~1.8),possibly due to the dehydration reaction of serpentine.Based on the Vp,Vs,Vp/Vs anomalies combined with previous petrological experiments and thermodynamic models,it can be derived that intermediate-depth earthquakes are mainly related to the dehydration of various hydrous minerals in the subducting slab.The dehydration process of hydrous minerals releases water into the subducting slab and subsequently leads to the increase of pore fluid pressure and the decrease of effective normal stress,thus causing the occurrence of brittle failure and intermediate-depth earthquakes in subduction zones.The imaging results of the northern Chile subduction zone further indicate that the existence of the double seismic zone is related to the dehydration process of different hydrous minerals.

液晶填充一维阶梯型Double-period结构局域模的调控特性

利用传输矩阵法研究了向列相液晶填充一维阶梯型Double-period第4代准周期结构局域模的电场方向、外界温度调控特性。通过改变电场方向和外界温度,研究该结构透射谱的调控特性。结果表明：温度一定时,液晶的有效折射率都随着夹角θ的增大而逐渐减小,局域模波长随夹角θ的增大而发生蓝移;当夹角θ接近54°时,向列相液晶的有效折射率与温度呈现近正比线性关系;夹角θ小于54°时,向列相液晶的有效折射率随温度升高而逐渐减小,局域模波长随外界温度（300~378.15K）的升高而发生蓝移;夹角θ大于54°时,随温度升高,向列相液晶的有效折射率先减小后增大,局域模波长先发生蓝移再发生红移。无论是外界温度升高还是电场方向夹角的增大,局域模的调控量始终是减小的,且局域模的调控量与液晶有效折射率差值成正比线性关系。

云南盐津地区两种地震序列的地震活动性分析

2020年9月—2021年1月,云南盐津地区出现了密集中小地震活动。为获取更完备的地震目录和更准确的震源参数,利用2020年1月—2021年2月云南及其邻区地震台网记录到地震事件的观测报告和连续波形,采用匹配定位方法检测到了1340次地震事件。利用联合波形互相关的双差地震定位方法进行重定位,获得了检测目录中351次地震的精确位置,对精定位后的地震活动时空分布特征进行分析研究,结果表明:盐津地区发生的密集中小地震活动为先后发生的2种不同类型的地震序列,沿两条不同走向和倾角的断裂分布,其中2020年9—10月的M_(L)3.9震群型地震序列发生在NNW走向、倾角约为75°的盐津—筠连断裂;2021年1月的M_(L)5.2孤立型地震序列发生在近SN走向、断层线与盐津—筠连断裂呈约30°夹角且倾角约为50°的隐伏断裂。

碳减排政策的就业效应:来自碳交易试点的经验证据

在理论探析碳减排政策影响就业的基础上,运用双重差分模型评估碳交易政策的就业效应。研究表明:碳交易政策的实施导致试点地区就业率显著提升,且碳交易政策能够加速劳动力城乡流动、行业转移以及性别转换,同时使得劳动力技能结构呈现“两头粗、中间细”的分布特征;碳交易政策的就业效应并不局限于试点地区一隅,亦能够对试点周边地区产生显著的负向溢出效应;试点地区劳动力增加来源包括“就地转换”“走的少”和“来的多”3个方面。进一步地,碳交易试点政策所诱发的就业率提升主要得益于产业结构高级化驱动的劳动力需求扩大和工资提升所驱动的劳动力供给增加。

碳排放权交易试点政策与绿色高质量发展

基于2008—2020年省级面板数据,通过熵值法构建出绿色高质量发展指标体系;使用双重差分模型将碳排放权交易政策的推行视作准自然的实验,研究分析该政策对我国绿色高质量发展产生的政策效应。研究结论如下:该试点政策的推行对绿色高质量发展具有正向的促进作用;并通过助推产业结构的优化升级,进而实现绿色高质量发展;研究表明在该项政策推动绿色高质量发展的过程中,工业化程度、碳排放水平越高的省份,碳排放权交易试点政策对绿色高质量发展的影响更显著。这一研究结论既是对助推绿色高质量发展的重要实证支撑,也是对推动我国全国碳市场建设的重要决策支持。

基于双螺旋式加热器的柔性MEMS流量传感器

针对传统流量传感器的量程限制,提出了一种基于双螺旋结构加热器的柔性基底微机电系统(MEMS)热式流量传感器。在基底上打出均匀通孔阵列以降低热传导损耗,两对测温电阻对称分布在加热器两侧,以获得较宽量程,在微小流量与大流量下均表现出较高灵敏度。采用基于惠斯通电桥的检测电路实现输出电压的测量,同时保持加热器与环境温度恒定温差200 K,对电阻自热进行补偿。传感器工作温度-100~400℃,量程为0~60 m/s;低流速下灵敏度约为12.75 V/(m·s^(-1)),分辨率可达0.001 mm/s,高流速下灵敏度约为1.4 mV/(m·s^(-1)),功耗低至1.3 mW。

美国加征关税与我国产品出口变动

基于2017~2020年HS6位码产品贸易月度数据,采用双重差分法分轮次评估了美国对华加征关税对我国产品出口的影响。研究发现,加征关税虽然抑制了我国输美产品的出口贸易额,降低了我国输美产品的出口竞争力,但也间接丰富了我国产品出口流向及路径。异质性分析表明加征关税对我国消费品和采用加工贸易方式出口的产品影响更显著。进一步分析表明加征关税对我国输美出口产品质量和产品结构产生了负面影响。本文拓展了美国加征关税经济效应的研究,为我国应对国际经贸摩擦、推进更高水平对外开放提供了政策参考。