On YBCO/LaAlO3/YBCO substrate with the dimension of 10 mm 20 mm, a miniature HTSC (high tem- perature superconductivity) bandpass filter with multi-zig- zag line structure is developed. At 77 K, the center frequency i...On YBCO/LaAlO3/YBCO substrate with the dimension of 10 mm 20 mm, a miniature HTSC (high tem- perature superconductivity) bandpass filter with multi-zig- zag line structure is developed. At 77 K, the center frequency is 1.2 GHz, the bandwidth is 50 MHz, and the insertion loss is 0.12 dB.展开更多
Zigzag line is a common defect in friction stir welding(FSW) joint.The formation mechanism of the zigzag line in Al-Cu alloy FSW joint and its influence on the microstructure and mechanical properties during post weld...Zigzag line is a common defect in friction stir welding(FSW) joint.The formation mechanism of the zigzag line in Al-Cu alloy FSW joint and its influence on the microstructure and mechanical properties during post weld heat treatment(PWHT) were studied by scanning electron microscopy(SEM),microhardness and tensile tests.It is found that the occurrence of zigzag line for PWHT joint is determined by PWHT process which in nature depends on residual stress and thermal stress of FSW joint.The optimization of PWHT process to reduce the residual and thermal stress can trigger for the deterioration of mechanical properties of PWHT joints with zigzag line.No obvious decrease of tensile properties is observed for T6-450 and T6-495 joints although zigzag line appears in the weld.PWHT determines the sizes of zigzag line cracks and consequently determines the fracture location and characteristics of FSW joint.展开更多
基金This work was supported by the“863”Project(Grant No.863-CD060201)the National Superconductor Institute.
文摘On YBCO/LaAlO3/YBCO substrate with the dimension of 10 mm 20 mm, a miniature HTSC (high tem- perature superconductivity) bandpass filter with multi-zig- zag line structure is developed. At 77 K, the center frequency is 1.2 GHz, the bandwidth is 50 MHz, and the insertion loss is 0.12 dB.
基金financially supported by the National Natural Science Foundation of China(Nos.51775397 and 51405358)the China Automobile Industry Innovation and Development Joint Fund(No.U1564202)+1 种基金the Program of the Ministry of Education of China for Introducing Talents of Discipline to Universities(No.B17034)the Open Fund of Shanghai Key Laboratory of Digital Manufacture for Thin-Walled Structures(No.2017002)
文摘Zigzag line is a common defect in friction stir welding(FSW) joint.The formation mechanism of the zigzag line in Al-Cu alloy FSW joint and its influence on the microstructure and mechanical properties during post weld heat treatment(PWHT) were studied by scanning electron microscopy(SEM),microhardness and tensile tests.It is found that the occurrence of zigzag line for PWHT joint is determined by PWHT process which in nature depends on residual stress and thermal stress of FSW joint.The optimization of PWHT process to reduce the residual and thermal stress can trigger for the deterioration of mechanical properties of PWHT joints with zigzag line.No obvious decrease of tensile properties is observed for T6-450 and T6-495 joints although zigzag line appears in the weld.PWHT determines the sizes of zigzag line cracks and consequently determines the fracture location and characteristics of FSW joint.
