Gas phase hydrogenation of crotonaldehyde was performed over 1 wt% Rh/ZnO-Al2O3 catalysts with various Zn/Rh atomic ratios. Monometallic Rh/Al2O3 was also prepared for comparison. The samples were prepared by the succ...Gas phase hydrogenation of crotonaldehyde was performed over 1 wt% Rh/ZnO-Al2O3 catalysts with various Zn/Rh atomic ratios. Monometallic Rh/Al2O3 was also prepared for comparison. The samples were prepared by the successive impregnation of Al2O3 with chlo-ride precursors of zinc and rhodium. The solids have been characterized by H2 chemisorption,temperature-programmed reduction,scanning electron microscopy,and cyclohexane dehydrogenation. Their catalytic behaviour in the gas phase crotonaldehyde hydrogenation reaction after reduction treatment in flowing hydrogen at 723 K was investigated. The relationship between catalytic activity,selectivity for crotyl alcohol,and physicochemical properties of the catalysts was examined. Results obtained showed that the presence of Zn clearly promotes the hydrogenation of the carbonyl bond. The catalyst with Zn/Rh atomic ratio of 5 displayed good catalytic stability and the highest selectivity for crotyl alcohol(70%) along with alloy formation.展开更多
Extracting, transportation and the using from fossil fuels can damage to the hydrosphere, the biosphere and the Earth＇s atmosphere. But humans always need to this valuable substance. The production of oil derivatives...Extracting, transportation and the using from fossil fuels can damage to the hydrosphere, the biosphere and the Earth＇s atmosphere. But humans always need to this valuable substance. The production of oil derivatives by means of forest waste and coal through the Fischer-Tropsch process is an appropriate solution for the cleanliness of all parts of the environment. For the production of favorite products by the synthesis of Fischer-Tropsch, the performance of the catalyst under different operating conditions should be predictable. For this reason, in this paper, eight mathematical models were determined for the selectivity of five products of methane, light hydrocarbons, gasoline, diesel and wax based on three factors of reduction temperature, time on stream, and He/CO ratio inlet gas on iron-based catalyst. The results showed that the reduction temperature factor had the most effective on the selectivity of hydrocarbon products, exception diesel, so that the increase of the reduction temperature led to increase of the selectivity of methane, light hydrocarbons, gasoline and reduce of the degree of selectivity of the wax and vice versa. For the diesel selectivity, factor of the He/CO ratio inlet gas was the most effective than other factors.展开更多
基金supported by the Centre de Recherche Scientifique et Technique en Analyses Physico-Chimiques (C.R.A.P.C)Université des Sciences et de la Technologie,Houari Boumediene (USTHB)
文摘Gas phase hydrogenation of crotonaldehyde was performed over 1 wt% Rh/ZnO-Al2O3 catalysts with various Zn/Rh atomic ratios. Monometallic Rh/Al2O3 was also prepared for comparison. The samples were prepared by the successive impregnation of Al2O3 with chlo-ride precursors of zinc and rhodium. The solids have been characterized by H2 chemisorption,temperature-programmed reduction,scanning electron microscopy,and cyclohexane dehydrogenation. Their catalytic behaviour in the gas phase crotonaldehyde hydrogenation reaction after reduction treatment in flowing hydrogen at 723 K was investigated. The relationship between catalytic activity,selectivity for crotyl alcohol,and physicochemical properties of the catalysts was examined. Results obtained showed that the presence of Zn clearly promotes the hydrogenation of the carbonyl bond. The catalyst with Zn/Rh atomic ratio of 5 displayed good catalytic stability and the highest selectivity for crotyl alcohol(70%) along with alloy formation.
文摘Extracting, transportation and the using from fossil fuels can damage to the hydrosphere, the biosphere and the Earth＇s atmosphere. But humans always need to this valuable substance. The production of oil derivatives by means of forest waste and coal through the Fischer-Tropsch process is an appropriate solution for the cleanliness of all parts of the environment. For the production of favorite products by the synthesis of Fischer-Tropsch, the performance of the catalyst under different operating conditions should be predictable. For this reason, in this paper, eight mathematical models were determined for the selectivity of five products of methane, light hydrocarbons, gasoline, diesel and wax based on three factors of reduction temperature, time on stream, and He/CO ratio inlet gas on iron-based catalyst. The results showed that the reduction temperature factor had the most effective on the selectivity of hydrocarbon products, exception diesel, so that the increase of the reduction temperature led to increase of the selectivity of methane, light hydrocarbons, gasoline and reduce of the degree of selectivity of the wax and vice versa. For the diesel selectivity, factor of the He/CO ratio inlet gas was the most effective than other factors.
