Hierarchically porous carbons(HPCs)with multimodal pores have attracted considerable attention due to their unique physical and chemical properties and various application potentials in heterogeneous catalysis,environ...Hierarchically porous carbons(HPCs)with multimodal pores have attracted considerable attention due to their unique physical and chemical properties and various application potentials in heterogeneous catalysis,environmental treatment,and energy storage and conversion.Herein,we report a general and simple zinc salts-assisted method for the synthesis of HPCs with varied porosity and chemical func-tionalities by the direct carbonization of diverse biomass and wastes.During the carbonization,zinc salts are thermally decomposed into nanoparticles that serve as in-situ templates to introduce nanopores in carbons.The prepared HPCs exhibit high specific surface areas(up to 2432 m2 g-1),large pore volumes(up to 4.30 cm^(3)g^(-1)),and broad pore size distributions.Moreover,the zinc salts can be recovered and recycled,supporting the sustainable production of HPCs on large scale.The prepared HPCs-supported catalysts with atomically dispersed metal sites exhibit promising electrocatalytic performance for the oxygen reduction reaction.展开更多
The title zinc（Ⅱ） complex salt [Zn（H2O）6]（ClO4）2-（PNOS）4, where PNOS is derived from picolinaldehyde N-oxide with semicarbazone, has been prepared and structurally characterized by X-ray single-crystal analys...The title zinc（Ⅱ） complex salt [Zn（H2O）6]（ClO4）2-（PNOS）4, where PNOS is derived from picolinaldehyde N-oxide with semicarbazone, has been prepared and structurally characterized by X-ray single-crystal analysis. It crystallizes in triclinic, space group PI with a = 7.529（3）, b = 10.206（4）, c = 14.678（6）A, a = 86.293（6）, β= 87.686（7）, γ= 81.382（6）°, C28H44Cl2N16O22Zn, Mr = 1093.06, V = 1112.3（8） ,A^3 Z = 1, Dc = 1.632 g/cm^3, S = 1.089, μ（MoKa） = 0.773 mm^-1, F（000） = 564, the final R = 0.0438 and wR = 0.1076 for 3888 independent reflections with Rint = 0.0224. The crystal structure possesses a [Zn（H2O）6]^2＋ cation, two ClO4^- anions and four PNOSs. In the crystal structure, Zn^2＋ cation is located at the symcenter and coordinated by six water molecules. In [Zn（H2O）6]^2＋, an elongate octahedral complex cation, the average Zn-O bond length is 2.087（2） A. There exist a lot of H bonds in the structure, linking the cation [Zn（H2O）6]^2＋, anion ClO4^- and PNOS to form a 3D network.展开更多
The solubility properties of ZnCl\-2/ZnAc\-2/ZnSO\-4MetH\-2O systems at 25℃ in the whole cocentration range have been investigated by phase equilibrium method. The results indicate that ZnAc\-2 and ZnSO\-4 systems ar...The solubility properties of ZnCl\-2/ZnAc\-2/ZnSO\-4MetH\-2O systems at 25℃ in the whole cocentration range have been investigated by phase equilibrium method. The results indicate that ZnAc\-2 and ZnSO\-4 systems are both simple systems, which do not exist any compound; there are 2 complexes formed in ZnCl\-2 system: Zn（Met）Cl\-2 and Zn（Met）\-2Cl\-2·2H\-2O. Under the direction of phase equilibrium result, 2 solid complexes have been prepared in water and characterized by chemical analysis, IR, Xray diffraction. Their combustion energies have also been determined by means of a RBCtype1 rotatingbomb calorimeter, and their standard enthalpies of formation, Δ f, coor（s）H O-, have been calculated which are （-828.32±3.00） kJ·mol -1 and （-1 117.08±6.15） kJ·mol -1, respectively.展开更多
Biocompatible devices are widely employed in modernized lives and medical fields in the forms of wearable and implantable devices,raising higher requirements on the battery biocompatibility,high safety,low cost,and ex...Biocompatible devices are widely employed in modernized lives and medical fields in the forms of wearable and implantable devices,raising higher requirements on the battery biocompatibility,high safety,low cost,and excellent electrochemical performance,which become the evaluation criteria toward developing feasible biocompatible batteries.Herein,through conducting the battery implantation tests and leakage scene simulations on New Zealand rabbits,zinc sulfate electrolyte is proved to exhibit higher biosecurity and turns out to be one of the ideal zinc salts for biocompatible zinc-ion batteries(ZIBs).Furthermore,in order to mitigate the notorious dendrite growth and hydrogen evolution in mildly acidic electrolyte as well as improve their operating stability,Sn hetero nucleus is introduced to stabilize the zinc anode,which not only facilitates the planar zinc deposition,but also contributes to higher hydrogen evolution overpotential.Finally,a long lifetime of 1500 h for the symmetrical cell,the specific capacity of 150 mAh g^(-1)under 0.5 A g^(-1)for the Zn-MnO_(2)battery and 212 mAh g^(-1)under 5 A g^(-1)for the Zn—NH4V4O10 battery are obtained.This work may provide unique perspectives on biocompatible ZIBs toward the biosecurity of their cell components.展开更多
A conversion film was obtained on zinc deposit by immersing zinc coated specimens in a mischmetal salt solution. Several factors affecting the anticorrosive efficiency of the conversion film were studied. The suitabl...A conversion film was obtained on zinc deposit by immersing zinc coated specimens in a mischmetal salt solution. Several factors affecting the anticorrosive efficiency of the conversion film were studied. The suitable technological conditions were established. The composition and the thickness of the conversion film were determined by Auger electron spectroscopy(AES).展开更多
The results of recent mineral exploration in the Yuele lead-zinc mining area of Daguan County, northeastern Yunnan province, showed that there are much early Paleozoic strata under thick late Paleozoic strata in north...The results of recent mineral exploration in the Yuele lead-zinc mining area of Daguan County, northeastern Yunnan province, showed that there are much early Paleozoic strata under thick late Paleozoic strata in northeastern Yunnan province, where developed some hidden salt structures (SSs), often with lead-zinc polymetallic mineralization varying degrees along the tension torsional fault (belts) or fracture (joint). The ore-bodies belong to the epigenetic hydrothermal filling vein-type deposit, and the prospecting potential is great. In this area, the superficial mineralization information displayed clear, but the deep mineralization is unknown, so the exploration work is restricted. The audio-megnetotelluric (AMT) surveying is an advantageous method to characterize the size, resistivity and skin depth of the polarizable mineral deposit concealed beneath thick overburden. This paper presents the surveying results using AMT method to evaluate the concealed lead-zinc mineralization in Yuele lead-zinc ore field, Daguancounty, NE Yunnan province, China. After comparing the interpretation result of AMT surveying data with the geological data and the drilling data, it is found that there is some distinct difference in resistivity and polarizable between ore-bodies hosted strata, upper strata and gypsum strata. The results show that AMT method is helpful to identify lead-zinc mineralization under this geological condition.展开更多
It was found that the steel plate in the composite plate in the WJ-8 fastener used in high speed rail is rusty. The objective of this study is to test the zinc coating of the steel plate. A literature review was condu...It was found that the steel plate in the composite plate in the WJ-8 fastener used in high speed rail is rusty. The objective of this study is to test the zinc coating of the steel plate. A literature review was conducted to identify the zinc coating techniques, and the companies that can provide different coating service was identified. A salt fog chamber was built that was in compliance with the ANSI B117 code, and the steel plates that were coated by the identified companies were tested using the salt fog chamber. The results indicated that the coating technique that had the best performance in preventing corrosion was the Greenkote plates with passivation. The galvanized option had the roughest coating layer, and it was the most reactive in the salt water solution. This makes it non-ideal for the dynamic rail environment because the increased friction of the plate could damage the supports, especially during extreme temperatures that would cause the rail to expand or contract. Greenkote with Phosphate and ArmorGalv also provided increased corrosion prevention with a smooth, strong finish, but it had more rust on the surface area than the Greenkote with ELU passivation. The ArmorGalv sample had more rust on the surface area than the Greenkote samples. This may not be a weakness in the ArmorGalv process;rather, it likely was the result of this particular sample not having the added protection of a colored coating.展开更多
基金the funding support from the National Key Research and Development Program of China(grant No.2018YFA0702001)the National Natural Science Foundation of China(grant Nos.22071225 and 22221003)+4 种基金the Plan for Anhui Major Provincial Science&Technology Project(grant Nos.202203a0520013 and 202103a05020015)the Fundamental Research Funds for the Central Universities(grant No WK2060190103)the Joint Funds from Hefei National Synchrotron Radiation Laboratory(grant No.KY2060000175)Collaborative Innovation Program of Hefei Science Center of CAS(grant No.2021HSC-CIP015)USTC Research Funds of the Double First-Class Initiative.
文摘Hierarchically porous carbons(HPCs)with multimodal pores have attracted considerable attention due to their unique physical and chemical properties and various application potentials in heterogeneous catalysis,environmental treatment,and energy storage and conversion.Herein,we report a general and simple zinc salts-assisted method for the synthesis of HPCs with varied porosity and chemical func-tionalities by the direct carbonization of diverse biomass and wastes.During the carbonization,zinc salts are thermally decomposed into nanoparticles that serve as in-situ templates to introduce nanopores in carbons.The prepared HPCs exhibit high specific surface areas(up to 2432 m2 g-1),large pore volumes(up to 4.30 cm^(3)g^(-1)),and broad pore size distributions.Moreover,the zinc salts can be recovered and recycled,supporting the sustainable production of HPCs on large scale.The prepared HPCs-supported catalysts with atomically dispersed metal sites exhibit promising electrocatalytic performance for the oxygen reduction reaction.
基金Natural Science Foundation and Education Department Foundation of Guangxi Province
文摘The title zinc（Ⅱ） complex salt [Zn（H2O）6]（ClO4）2-（PNOS）4, where PNOS is derived from picolinaldehyde N-oxide with semicarbazone, has been prepared and structurally characterized by X-ray single-crystal analysis. It crystallizes in triclinic, space group PI with a = 7.529（3）, b = 10.206（4）, c = 14.678（6）A, a = 86.293（6）, β= 87.686（7）, γ= 81.382（6）°, C28H44Cl2N16O22Zn, Mr = 1093.06, V = 1112.3（8） ,A^3 Z = 1, Dc = 1.632 g/cm^3, S = 1.089, μ（MoKa） = 0.773 mm^-1, F（000） = 564, the final R = 0.0438 and wR = 0.1076 for 3888 independent reflections with Rint = 0.0224. The crystal structure possesses a [Zn（H2O）6]^2＋ cation, two ClO4^- anions and four PNOSs. In the crystal structure, Zn^2＋ cation is located at the symcenter and coordinated by six water molecules. In [Zn（H2O）6]^2＋, an elongate octahedral complex cation, the average Zn-O bond length is 2.087（2） A. There exist a lot of H bonds in the structure, linking the cation [Zn（H2O）6]^2＋, anion ClO4^- and PNOS to form a 3D network.
文摘The solubility properties of ZnCl\-2/ZnAc\-2/ZnSO\-4MetH\-2O systems at 25℃ in the whole cocentration range have been investigated by phase equilibrium method. The results indicate that ZnAc\-2 and ZnSO\-4 systems are both simple systems, which do not exist any compound; there are 2 complexes formed in ZnCl\-2 system: Zn（Met）Cl\-2 and Zn（Met）\-2Cl\-2·2H\-2O. Under the direction of phase equilibrium result, 2 solid complexes have been prepared in water and characterized by chemical analysis, IR, Xray diffraction. Their combustion energies have also been determined by means of a RBCtype1 rotatingbomb calorimeter, and their standard enthalpies of formation, Δ f, coor（s）H O-, have been calculated which are （-828.32±3.00） kJ·mol -1 and （-1 117.08±6.15） kJ·mol -1, respectively.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.82103472,82202480,and 52372252)the Hunan Natural Science Fund for Distinguished Young Scholar(2021JJ10064)the Program of Youth Talent Support for Hunan Province(2020RC3011).
文摘Biocompatible devices are widely employed in modernized lives and medical fields in the forms of wearable and implantable devices,raising higher requirements on the battery biocompatibility,high safety,low cost,and excellent electrochemical performance,which become the evaluation criteria toward developing feasible biocompatible batteries.Herein,through conducting the battery implantation tests and leakage scene simulations on New Zealand rabbits,zinc sulfate electrolyte is proved to exhibit higher biosecurity and turns out to be one of the ideal zinc salts for biocompatible zinc-ion batteries(ZIBs).Furthermore,in order to mitigate the notorious dendrite growth and hydrogen evolution in mildly acidic electrolyte as well as improve their operating stability,Sn hetero nucleus is introduced to stabilize the zinc anode,which not only facilitates the planar zinc deposition,but also contributes to higher hydrogen evolution overpotential.Finally,a long lifetime of 1500 h for the symmetrical cell,the specific capacity of 150 mAh g^(-1)under 0.5 A g^(-1)for the Zn-MnO_(2)battery and 212 mAh g^(-1)under 5 A g^(-1)for the Zn—NH4V4O10 battery are obtained.This work may provide unique perspectives on biocompatible ZIBs toward the biosecurity of their cell components.
文摘A conversion film was obtained on zinc deposit by immersing zinc coated specimens in a mischmetal salt solution. Several factors affecting the anticorrosive efficiency of the conversion film were studied. The suitable technological conditions were established. The composition and the thickness of the conversion film were determined by Auger electron spectroscopy(AES).
文摘The results of recent mineral exploration in the Yuele lead-zinc mining area of Daguan County, northeastern Yunnan province, showed that there are much early Paleozoic strata under thick late Paleozoic strata in northeastern Yunnan province, where developed some hidden salt structures (SSs), often with lead-zinc polymetallic mineralization varying degrees along the tension torsional fault (belts) or fracture (joint). The ore-bodies belong to the epigenetic hydrothermal filling vein-type deposit, and the prospecting potential is great. In this area, the superficial mineralization information displayed clear, but the deep mineralization is unknown, so the exploration work is restricted. The audio-megnetotelluric (AMT) surveying is an advantageous method to characterize the size, resistivity and skin depth of the polarizable mineral deposit concealed beneath thick overburden. This paper presents the surveying results using AMT method to evaluate the concealed lead-zinc mineralization in Yuele lead-zinc ore field, Daguancounty, NE Yunnan province, China. After comparing the interpretation result of AMT surveying data with the geological data and the drilling data, it is found that there is some distinct difference in resistivity and polarizable between ore-bodies hosted strata, upper strata and gypsum strata. The results show that AMT method is helpful to identify lead-zinc mineralization under this geological condition.
文摘It was found that the steel plate in the composite plate in the WJ-8 fastener used in high speed rail is rusty. The objective of this study is to test the zinc coating of the steel plate. A literature review was conducted to identify the zinc coating techniques, and the companies that can provide different coating service was identified. A salt fog chamber was built that was in compliance with the ANSI B117 code, and the steel plates that were coated by the identified companies were tested using the salt fog chamber. The results indicated that the coating technique that had the best performance in preventing corrosion was the Greenkote plates with passivation. The galvanized option had the roughest coating layer, and it was the most reactive in the salt water solution. This makes it non-ideal for the dynamic rail environment because the increased friction of the plate could damage the supports, especially during extreme temperatures that would cause the rail to expand or contract. Greenkote with Phosphate and ArmorGalv also provided increased corrosion prevention with a smooth, strong finish, but it had more rust on the surface area than the Greenkote with ELU passivation. The ArmorGalv sample had more rust on the surface area than the Greenkote samples. This may not be a weakness in the ArmorGalv process;rather, it likely was the result of this particular sample not having the added protection of a colored coating.
