The effects of Y on the microstructure and mechanical properties of Mg-6Zn-lMn alloy were investigated. The results show that the addition of Y has significant effect on the phase composition, microstructure and mecha...The effects of Y on the microstructure and mechanical properties of Mg-6Zn-lMn alloy were investigated. The results show that the addition of Y has significant effect on the phase composition, microstructure and mechanical properties of Mg-6Zn-lMn alloy. Varied phases compositions, including Mg7Zn3, I-phase (Mg3YZn6), W-phase (Mg3Y2Zn3) and X-phase (MgI2YZn), are obtained by adjusting the Zn to Y mass ratio. Mn element exists as the fine Mn particles, which are well distributed in the alloy. Thermal analysis and microstructure observation reveal that the phase stability follows the trend of X〉W〉/〉MgTZn3. In addition, Y can improve the mechanical properties of Mg-Zn-Mn alloy significantly, and the alloy with Y content of 6.09% has the best mechanical properties. The high strength is mainly due to the strengthening by the grain size refinement, dispersion strengthening by fine Mn particles, and introduction of the Mg-Zn-Y ternary phases.展开更多
利用共沉淀法制备了四组分的Cu Zn Al Mn和Cu Zn Al Ce催化剂以及三组分的Cu Zn Al催化剂。利用组成H2/CO/CO2/N2=66/27/3/4(体积比)的富CO原料气对催化剂进行了活性评价,并研究了温度、压力和空速等反应条件对催化剂活性的影响。结果...利用共沉淀法制备了四组分的Cu Zn Al Mn和Cu Zn Al Ce催化剂以及三组分的Cu Zn Al催化剂。利用组成H2/CO/CO2/N2=66/27/3/4(体积比)的富CO原料气对催化剂进行了活性评价,并研究了温度、压力和空速等反应条件对催化剂活性的影响。结果发现添加适量的锰助剂能显著提高催化剂的活性和热稳定性。利用SEM和XRD方法进行了催化剂的结构和形貌表征,同样表明锰助剂可以起到阻止CuO晶粒长大和促进CuO分散作用。利用富CO2的生物质原料气体积比为H2/CO/CO2/N2=50/25/20/5对Cu Zn Al Mn催化剂进行的评价表明:Cu Zn Al Mn催化剂上CO/CO2加氢合成甲醇的甲醇产率和选择性均有下降,在试验范围内,甲醇产率下降11%~25%,选择性为93%~95%。展开更多
基金supported by the Hunan Provincial Natural Science Foundation,China(No.2023JJ40626)Science and Technology Innovation Program of Hunan Province,China(No.2020RC2080)the National Natural Science Foundation of China(No.51971190)。
基金Project(2007CB613700)supported by the National Basic Research Program of ChinaProject(2011BAE22B01-3)supported by the National Key Technologies R&D Program of China+1 种基金Project(2010DFR50010,2008DFR50040)supported by the International Scientific and Technological Cooperation Program of Ministry of Science and Technology of ChinaProject(CSTC,2010AA4048)supported by Chongqing Science and Technology Commission,China
文摘The effects of Y on the microstructure and mechanical properties of Mg-6Zn-lMn alloy were investigated. The results show that the addition of Y has significant effect on the phase composition, microstructure and mechanical properties of Mg-6Zn-lMn alloy. Varied phases compositions, including Mg7Zn3, I-phase (Mg3YZn6), W-phase (Mg3Y2Zn3) and X-phase (MgI2YZn), are obtained by adjusting the Zn to Y mass ratio. Mn element exists as the fine Mn particles, which are well distributed in the alloy. Thermal analysis and microstructure observation reveal that the phase stability follows the trend of X〉W〉/〉MgTZn3. In addition, Y can improve the mechanical properties of Mg-Zn-Mn alloy significantly, and the alloy with Y content of 6.09% has the best mechanical properties. The high strength is mainly due to the strengthening by the grain size refinement, dispersion strengthening by fine Mn particles, and introduction of the Mg-Zn-Y ternary phases.
文摘利用共沉淀法制备了四组分的Cu Zn Al Mn和Cu Zn Al Ce催化剂以及三组分的Cu Zn Al催化剂。利用组成H2/CO/CO2/N2=66/27/3/4(体积比)的富CO原料气对催化剂进行了活性评价,并研究了温度、压力和空速等反应条件对催化剂活性的影响。结果发现添加适量的锰助剂能显著提高催化剂的活性和热稳定性。利用SEM和XRD方法进行了催化剂的结构和形貌表征,同样表明锰助剂可以起到阻止CuO晶粒长大和促进CuO分散作用。利用富CO2的生物质原料气体积比为H2/CO/CO2/N2=50/25/20/5对Cu Zn Al Mn催化剂进行的评价表明:Cu Zn Al Mn催化剂上CO/CO2加氢合成甲醇的甲醇产率和选择性均有下降,在试验范围内,甲醇产率下降11%~25%,选择性为93%~95%。