Co-doped BaFe_(2)As_(2) Josephson junction fabricated with a focused helium ion beam

Josephson junction plays a key role not only in studying the basic physics of unconventional iron-based superconductors but also in realizing practical application of thin-film based devices,therefore the preparation of high-quality iron pnictide Josephson junctions is of great importance.In this work,we have successfully fabricated Josephson junctions from Co-doped BaFe_(2)As_(2)thin films using a direct junction fabrication technique which utilizes high energy focused helium ion beam(FHIB).The electrical transport properties were investigated for junctions fabricated with various He^(+)irradiation doses.The junctions show sharp superconducting transition around 24 K with a narrow transition width of 2.5 K,and a dose correlated foot-structure resistance which corresponds to the effective tuning of junction properties by He^(+)irradiation.Significant J_c suppression by more than two orders of magnitude can be achieved by increasing the He^(+)irradiation dose,which is advantageous for the realization of low noise ion pnictide thin film devices.Clear Shapiro steps are observed under 10 GHz microwave irradiation.The above results demonstrate the successful fabrication of high quality and controllable Co-doped BaFe_(2)As_(2)Josephson junction with high reproducibility using the FHIB technique,laying the foundation for future investigating the mechanism of iron-based superconductors,and also the further implementation in various superconducting electronic devices.

Neutral and metallic vs.charged and semiconducting surface layer in acceptor doped CeO_(2)

The monomolecular surface layer of acceptor doped CeO_(2) may become neutral and metallic or charged and semiconducting.This is revealed in the theoretical analysis of the oxygen pressure dependence of the surface defects concentration in acceptor doped ceria with two different dopant types and operated under different oxygen pressures.Recently published experimental data for highly reduced Sm0.2Ce0.8O1.9-x(SDC)containing a fixed valence dopant Sm3+are very different from those published for Pr0.1Ce0.9O_(2)-x(PCO) with the variable valence dopant Pr4+/Pr3+being reduced under milder conditions.The theoretical analysis of these experimental results fits very well the experimental results of SDC and PCO.It leads to the following predictions:the highly reduced surface of SDC is metallic and neutral,the metallic surface electron density of state is gs=0.9×10^(38)J-1·m^(-2)(1.4×1015eV^(-1)·cm^(-2)),the electron effective mass is meff,s=3.3me,and the phase diagram of the reduced surface has theα(fcc)structure as in the bulk.In PCO a double layer is predicted to be formed between the surface and the bulk with the surface being negatively charged and semiconducting.The surface of PCO maintains high Pr^(3+) defect concentration as well as relative high oxygen vacancy concentration at oxygen pressures higher than in the bulk.The reasons for the difference between a metallic and semiconducting surface layer of acceptor doped CeO_(2) are reviewed,as well as the key theoretical considerations applied in coping with this problem.For that we make use of the experimental data and theoretical analysis available for acceptor doped ceria.

Durable hierarchical phosphorus‐doped biphase MoS_(2)electrocatalysts with enhanced H^(*)adsorption

Phase engineering is an efficient strategy for enhancing the kinetics of electrocatalytic reactions.Herein,phase engineering was employed to prepare high‐performance phosphorous‐doped biphase(1T/2H)MoS_(2)(P‐BMS)nanoflakes for hydrogen evolution reaction(HER).The doping of MoS_(2)with P atoms modifies its electronic structure and optimizes its electrocatalytic reaction kinetics,which significantly enhances its electrical conductivity and structural stability,which are verified by various characterization tools,including X‐ray photoelectron spectroscopy,high‐resolution transmission electron microscopy,X‐ray absorption near‐edge spectroscopy,and extended X‐ray absorption fine structure.Moreover,the hierarchically formed flakes of P‐BMS provide numerous catalytic surface‐active sites,which remarkably enhance its HER activity.The optimized P‐BMS electrocatalysts exhibit low overpotentials(60 and 72 mV at 10 mA cm^(−2))in H_(2)SO_(4)(0.5 M)and KOH(1.0 M),respectively.The mechanism of improving the HER activity of the material was systematically studied using density functional theory calculations and various electrochemical characterization techniques.This study has shown that phase engineering is a promising strategy for enhancing the H*adsorption of metal sulfides.

Unveiling the pressure-driven metal–semiconductor–metal transition in the doped TiS_(2)

Conventional theories expect that materials under pressure exhibit expanded valence and conduction bands,leading to increased electrical conductivity.Here,we report the electrical properties of the doped 1T-TiS_(2) under high pressure by electrical resistance investigations,synchrotron x-ray diffraction,Raman scattering and theoretical calculations.Up to 70 GPa,an unusual metal-semiconductor-metal transition occurs.Our first-principles calculations suggest that the observed anti-Wilson transition from metal to semiconductor at 17 GPa is due to the electron localization induced by the intercalated Ti atoms.This electron localization is attributed to the strengthened coupling between the doped Ti atoms and S atoms,and the Anderson localization arising from the disordered intercalation.At pressures exceeding 30.5 GPa,the doped TiS_(2) undergoes a re-metallization transition initiated by a crystal structure phase transition.We assign the most probable space group as P2_(1)2_(1)2_(1).Our findings suggest that materials probably will eventually undergo the Wilson transition when subjected to sufficient pressure.

Small but mighty:Empowering sodium/potassium-ion battery performance with S-doped SnO_(2) quantum dots embedded in N,S codoped carbon fiber network

SnO_(2) has been extensively investigated as an anode material for sodium-ion batteries(SIBs)and potassium-ion batteries(PIBs)due to its high Na/K storage capacity,high abundance,and low toxicity.However,the sluggish reaction kinetics,low electronic conductivity,and large volume changes during charge and discharge hinder the practical applications of SnO_(2)-based electrodes for SIBs and PIBs.Engineering rational structures with fast charge/ion transfer and robust stability is important to overcoming these challenges.Herein,S-doped SnO_(2)(S-SnO_(2))quantum dots(QDs)(≈3 nm)encapsulated in an N,S codoped carbon fiber networks(S-SnO_(2)-CFN)are rationally fabricated using a sequential freeze-drying,calcination,and S-doping strategy.Experimental analysis and density functional theory calculations reveal that the integration of S-SnO_(2) QDs with N,S codoped carbon fiber network remarkably decreases the adsorption energies of Na/K atoms in the interlayer of SnO_(2)-CFN,and the S doping can increase the conductivity of SnO_(2),thereby enhancing the ion transfer kinetics.The synergistic interaction between S-SnO_(2) QDs and N,S codoped carbon fiber network results in a composite with fast Na+/K+storage and extraordinary long-term cyclability.Specifically,the S-SnO_(2)-CFN delivers high rate capacities of 141.0 mAh g^(−1) at 20 A g^(−1) in SIBs and 102.8 mAh g^(−1) at 10 A g^(−1) in PIBs.Impressively,it delivers ultra-stable sodium storage up to 10,000 cycles at 5 A g^(−1) and potassium storage up to 5000 cycles at 2 A g^(−1).This study provides insights into constructing metal oxide-based carbon fiber network structures for high-performance electrochemical energy storage and conversion devices.

Sn-doped BiOCl nanosheet with synergistic H^(+)/Zn^(2+)co-insertion for“rocking chair”zinc-ion battery

The development of insertion-type anodes is the key to designing“rocking chair”zinc-ion batteries.However,there is rare report on high mass loading anode with high performances.Here,{001}-oriented Bi OCl nanosheets with Sn doping are proposed as a promising insertion-type anode.The designs of cross-linked CNTs conductive network,{001}-oriented nanosheet,and Sn doping significantly enhance ion/electron transport,proved via experimental tests and theoretical calculations(density of states and diffusion barrier).The H^(+)/Zn^(2+)synergistic co-insertion mechanism is proved via ex situ XRD,Raman,XPS,and SEM tests.Accordingly,this optimized electrode delivers a high reversible capacity of 194 m A h g^(-1)at 0.1 A g^(-1)with a voltage of≈0.37 V and an impressive cyclability with 128 m A h g^(-1)over 2500 cycles at 1 A g^(-1).It also shows satisfactory performances at an ultrahigh mass loading of 10 mg cm^(-2).Moreover,the Sn-Bi OCl//MnO_(2)full cell displays a reversible capacity of 85 m A h g^(-1)at 0.2 A g^(-1)during cyclic test.

Zn^(2+)和TiO_(2)合金化过程中不同成分占比对薄膜结构和光催化性能的影响

使用溶胶-凝胶法在单晶硅衬底上制备一批不同Zn^(2+)成分调节的TiO_(2)薄膜,观测Zn^(2+)和TiO_(2)合金化过程中光学和光催化性能的变化.X射线衍射光谱仪用于观测在合金化过程中薄膜的晶体结构变化并追踪ZnTiO_(3)化合物的形成.扫描电子显微镜、原子力显微镜用于观测合金化过程中因TiO_(2)晶格对Zn^(2+)溶解度有限而导致薄膜表面出现大量孔洞的现象.X射线光电子能谱和光学带隙用于观测Zn^(2+)与TiO_(2)合金化过程中电子结构层面的变化.最后,通过降解亚甲基蓝(MB)溶液,表明少量Zn^(2+)掺杂完全溶解在TiO_(2)中,并破坏TiO_(2)结晶质量.在Zn^(2+)的成分占比继续提高至15%的过程中,XPS峰形拟合结果验证了TiO_(2)对Zn^(2+)的溶解度有限,导致薄膜出现大量孔洞结构,薄膜的活性比表面积得以提升,同时Zn^(2+)可以有效地捕获光生e^(-)/h^(+).为了继续观察Zn^(2+)浓度对TiO_(2)的影响,将Zn^(2+)的浓度提升至40%,观察Zn^(2+)与TiO_(2)合金化过程中的现象.表明化合物ZnTiO_(3)的出现可以充当e^(-)/h^(+)的复合中心以及TiO_(2).占比的大幅下降导致合金化之后的薄膜光催化效率逐渐下降.

Zn^(2+)掺杂硫化物/氢氧化物异质结构的性能

为提升硫化物的倍率性能和循环稳定性,采用两步电沉积法制备过渡金属硫化物/氢氧化物异质结构复合电极。在碳布上电沉积镍层,改良活性物质与碳布的接触活性;在硫代乙酰胺中添加Zn(NO3)2·7H_(2)O,制备Zn^(2+)掺杂的过渡金属硫化物/氢氧化物异质结构(NCS-Zn-2)。NCS-Zn-2在1 A/g电流下,比电容达到2 703 F/g,在150 A/g高电流下的比电容是1 A/g的40.8%,具有较好的倍率性能。NCS-Zn-2与活性炭组装的工作电压为1.6 V高电压水系非对称超级电容器,在794 W/kg的比功率下,具有79.9 W·h/kg的比能量,以20 A/g电流在0~1.6 V循环20 000次,电容保持率为98.7%。

Thermodynamic equilibrium theory-guided design and synthesis of Mg-doped LiFe_(0.4)Mn_(0.6)PO_(4)/C cathode for lithium-ion batteries

Mn-rich LiFe_(1-x)Mn_(x)PO_(4)(x>0.5),which combines the high operation voltage of LiMnPO_(4)with excellent rate performa nce of LiFePO4,is hindered by its sluggish kinetic properties.Herein,thermodynamic equilibrium analysis of Mn^(2+)-Fe^(2+)-Mg^(2+)-C_(2)O_(4)^(2-)-H_(2)O system is used to guide the design and preparation of insitu Mg-doped(Fe_(0.4)Mn_(0.6))_(1-x)Mg_(x)C_(2)O_(4)intermediate,which is then employed as an innovative precursor to synthesize high-performance Mg-doped LiFe_(0.4)Mn_(0.6)PO_(4).It indicates that the metal ions with a high precipitation efficiency and the stoichiometric precursors with uniform element distribution can be achieved under the optimized thermodynamic conditions.Meanwhile,accelerated Li+diffusivity and reduced charge transfer resistance originating from Mg doping are verified by various kinetic characterizations.Benefiting from the contributions of inherited homogeneous element distribution,small particle size,uniform carbon layer coating,enhanced Li+migration ability and structural stability induced by Mg doping,the Li(Fe_(0.4)Mn_(0.6))_(0.97)Mg_(0.03)PO_(4)/C exhibits splendid electrochemical performance.

Lewis acid-doped transition metal dichalcogenides for ultraviolet–visible photodetectors

Ultraviolet photodetectors(UV PDs)are widely used in civilian,scientific,and military fields due to their high sensitivity and low false alarm rates.We present a temperature-dependent Lewis acid p-type doping method for transition metal dichalcogenides(TMDs),which can effectively be used to extend the optical response range.The p-type doping based on surface charge transfer involves the chemical adsorption of the Lewis acid SnCl_(4)as a light absorption layer on the surface of WS_(2),significantly enhancing its UV photodetection performance.Under 365 nm laser irradiation,WS_(2)PDs exhibit response speed of 24 ms/20 ms,responsivity of 660 mA/W,detectivity of 3.3×10^(11)Jones,and external quantum efficiency of 226%.Moreover,we successfully apply this doping method to other TMDs materials(such as MoS_(2),MoSe_(2),and WSe_(2))and fabricate WS_(2) lateral p–n heterojunction PDs.

Plasma-assisted aerogel interface engineering enables uniform Zn^(2+)flux and fast desolvation kinetics toward zinc metal batteries

The poor reversibility of Zn anodes induced by dendrite growth,surface passivation,and corrosion,severely hinders the practical applicability of Zn metal batteries.To address these issues,a plasmaassisted aerogel(PAG)interface engineering was proposed as efficient ion transport modulator that can simultaneously regulate uniform Zn^(2+)flux and desolvation behavior during battery operation.The PAG with ordered mesopores acted as an ion sieve to homogenize Zn deposition and accelerate Zn^(2+)flux,which is favorable for corrosion resistance and dendrite suppression.Importantly,the plasma-assisted aerogel with abundant hydrophilic groups can facilitate the desolvation kinetics of Zn^(2+)due to the multiple hydrogen-bonding interaction with the activated water molecules,thus accelerating the Zn^(2+)migration kinetics.Consequently,the Zn/Zn cell assembled with PAG-modified separator demonstrates stable plating and stripping behavior(over 1400 h at 1 mA cm^(-2))and high Coulombic efficiency(99.8%at1 mA cm^(-2)after 1100 cycles),and the Zn‖MnO_(2)full cell shows excellent long-term cycling stability and maintains a high capacity of 154.9 mA h g^(-1)after 1000 cycles at 1 A g^(-1).This study provides a feasible approach for the large-scale fabrication of aerogel functionalized separators to realize ultra-stable Zn metal batteries.

基于不同荧光发色基团的Zn^(2+)荧光探针的研究进展

荧光光谱法具有灵敏度高、选择性好、检出限低以及操作简单等特点,设计合成特异性识别和检测Zn^(2+)的荧光探针对化学、生物学、临床医学等研究具有十分重要的意义。以近年来文献报道的Zn^(2+)荧光探针为例,综述了基于不同荧光发色基团的Zn^(2+)荧光探针的作用机制、应用与发展前景,为Zn^(2+)荧光探针研究提供了参考(引用文献44篇)。

NaH doped TiO_(2)as a high-performance catalyst for Mg/MgH_(2)cycling stability and room temperature absorption

This paper presents the catalytic effect of NaH doped nanocrystalline TiO_(2)(designated as NaTiOxH)in the improvement of MgH_(2)hydrogen storage properties.The catalyst preparation involves ball milling NaH with TiO_(2)for 3 hr.The addition of 5 wt%NaTiOxH powder into MgH_(2)reduces its operating temperature to∼185℃,which is∼110℃lower than the additive-free as-milled MgH_(2).The composite remarkably desorbs∼7.2 wt%H_(2)within 15 min at∼290℃and reabsorbs∼4.5 wt%H_(2)in 45 min at room temperature under 50 bar H_(2).MgH_(2)dehydrogenation is activated at 57 kJ/mol by the catalyst.More importantly,the addition of 2.5 wt%NaTiOxH catalyst aids MgH_(2)to reversibly produce∼6.1 wt%H_(2)upon 100 cycles within 475 hr at 300℃.Microstructural investigation into the catalyzed MgH_(2)composite reveals a firm contact existing between NaTiOxH and MgH_(2)particles.Meanwhile,the NaTiOxH catalyst consists of catalytically active Ti_(3)O_(5),and“rod-like”Na_(2)Ti_(3)O_(7)species liberated in-situ during preparation;these active species could provide multiple hydrogen diffusion pathways for an improved MgH_(2)sorption process.Furthermore,the elemental characterization identifies the reduced valence states of titanium(Ti<4+)which show some sort of reversibility consistent with H_(2)insertion and removal.This phenomenon is believed to enhance the mobility of Mg/MgH_(2)electrons by the creation and elimination of oxygen vacancies in the defective(TiO_(2-x))catalyst.Our findings have therefore moved MgH_(2)closer to practical applications.

Preparation of Sn-doped Ga_(2)O_(3) thin films and their solar-blind photoelectric detection performance

Sn doping is an effective way to improve the response rate of Ga_(2)O_(3) film based solar-blind detectors. In this paper,Sn-doped Ga_(2)O_(3) films were prepared on a sapphire substrate by radio frequency magnetron sputtering. The films were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and ultraviolet visible spectroscopy, and the effect of annealing atmosphere on the properties of films was studied. The Ga_(2)O_(3) films changed from amorphous to β-Ga_(2)O_(3) after annealing at 900 °C. The films were composed of micro crystalline particles with a diameter of about 5–20 nm.The β-Ga_(2)O_(3) had high transmittance for wavelengths above 300 nm, and obvious absorption for solar-blind signals at 200–280 nm.The metal semiconductor metal type solar-blind detectors were prepared. The detector based on Sn-doped β-Ga_(2)O_(3) thin film annealed in N_2 has the best response performance to 254 nm light. The photo-current is 10 μA at 20 V, the dark-current is 5.76 pA,the photo dark current ratio is 1.7 × 10~6, the response rate is 12.47 A/W, the external quantum efficiency is 6.09 × 10~3%, the specific detection rate is 2.61 × 10~(12) Jones, the response time and recovery time are 378 and 90 ms, respectively.

Boost activation of peroxymonosulfate by iron doped K_(2-x)Mn_(8)O_(16):Mechanism and properties

Among the numerous transition metal catalysts,manganese-based compounds are considered as promising peroxymonosulfate(PMS)catalysts due to their low cost and environmental friendliness,such as cryptomelane manganese oxide(K_(2-x)Mn_(8)O_(16):abbreviation KMnO).However,the limited catalytic performance of KMnO limits its practical application.In this work,iron-doped KMnO(Fe-KMnO)was prepared by one-step hydrothermal method to optimize its catalytic performance.Compared with KMnO/PMS system,Fe-KMnO/PMS system possessed more excellent removal efficiency of tetracycline(TC).Meanwhile,the Fe-KMnO/PMS system also exhibited good practical application potential and excellent stability.The mechanism of Fe-KMnO activation of PMS was further analyzed in detail.It was found that Fe participated in the redox of high-valent Mn,which promoted the activation of PMS.Moreover,The Fe site as an adsorption site enhanced the TC enrichment ability of the catalyst,reducing the mass transfer resistance and further enhancing the TC removal ability of Fe-KMnO/PMS system.This work not only provides an excellent PMS catalyst,but also offers new insights into the mechanism of PMS activation by bimetallic manganese-based catalysts.

Structural, Optical and Photocatalytic Properties of Cu2+ Doped ZnO Nanorods with Using HMTA Solvent Prepared by Hydrothermal Method

In this experiment, Cu2+ doped ZnO (Cu-ZnO) nanorods materials have been fabricated by hydrothermal method. Cu2+ ions were doped into ZnO with ratios of 2, 5 and 7 mol.% (compared to the mole’s number of Zn2+). The hexamethylenetetramine (HMTA) solvent used for the fabrication of Cu-ZnO nanorods with the mole ratio of Zn2+:HMTA = 1:4. The characteristics of the materials were analyzed by techniques, such as XRD, Raman shift, SEM and UV-vis diffuse reflectance spectra (DRS). The photocatalytic properties of the materials were investigated by the decomposition of the methylene blue (MB) dye solution under ultraviolet light. The results show that the size of Cu-ZnO nanorods was reduced when the Cu2+ doping ratio increased from 2 mol.% to 7 mol.%. The decomposition efficiency of the MB dye solution reached 92% - 97%, corresponding to the Cu2+ doping ratio changed from 2 - 7 mol.% (after 40 minutes of ultraviolet irradiation). The highest efficiency for the decomposition of the MB solution was obtained at a Cu2+ doping ratio of 2 mol.%.

Microstructure and magnetic properties of Ni-Zn ferrites doped with MnO_2

To improve the performance of Ni-Zn ferrites for power field use,the influence of MnO2 additive on the properties of Ni-Zn ferrites was investigated by the conventional powder metallurgy.The results show that MnO2 does not form a visible second phase in the doping mass fraction range of（0-2.0%）.The average grain size,sintering density and real permeability gradually decrease with the increase of the MnO2 content.And the DC resistivity continuously increases with the increase of MnO2 content.The saturation magnetization（magnetic moment in unit mass） first increases slightly when mass fraction of MnO2 is less than 0.4% MnO2,and then gradually decreases with increasing the MnO2 mass fraction due to the exchange interaction of the cations.When the excitation frequency is less than 1 MHz,the power loss（Pcv） continuously increases with increasing the MnO2 content due to the decrease of average grain size.However,when the excitation frequency exceeds 1 MHz,eddy current loss gradually becomes the predominant contribution to Pcv.And the sample with a higher resistivity favors a lower Pcv,except for the sample with 2.0% MnO2.The sample without additive has the best Pcv when worked at frequencies less than 1 MHz;and the sample with 1.6% MnO2 additive has the best Pcv when worked at frequencies higher than 1 MHz.

Zn^(2+)/Zn和Fe^(3+)/Fe^(2+)的电化学行为及其在液流电池中的应用

锌铁液流电池采用成本低廉的锌、铁元素作为活性物质,有望成为下一代高性价比储能电池。本文利用循环伏安法测试锌、铁离子在碳毡电极表面的电化学活性,计算Zn^(2+)/Zn与Fe^(3+)/Fe^(2+)的扩散系数与反应速率常数。结果表明,锌离子与铁离子在多孔碳毡上具有良好的电化学性能,可以作为锌铁液流电池的活性物质。充放电测试结果表明,锌铁液流电池的充放电性能良好,它具有较高的电流效率、电压效率和能量效率。

连续识别Zn^(2+)和草甘膦荧光探针的合成与应用

以2-巯基苯并噻唑为原料,设计合成了一种结构简单的苯并噻唑类荧光探针2-[2-(苯并噻吩-2-基亚甲基)肼基]苯并噻唑(简称NSS),并通过FTIR、HRMS、^(1)HNMR、^(13)CNMR对其结构进行了表征。荧光光谱表明,在二甲基亚砜中,探针NSS实现了Zn^(2+)的“关-开”型检测,具有响应时间短(30 s)、特异性强、抗干扰性强等优点。探针NSS荧光强度与Zn^(2+)浓度(0~11μmol/L)呈现良好的线性关系,检出限达19.1 nmol/L,并与Zn^(2+)形成物质的量比为1∶1的络合物。同时,络合物NSS-Zn^(2+)对草甘膦呈现特异性的荧光猝灭响应,猝灭率达99.4%,检出限16.0 nmol/L(2.71 ng/mL),且不受其他有机磷农药的干扰。

5%Ag掺杂对MNO_(2)纳米棒和海胆微球形貌及其甲苯氧化性能的影响

采用水热法制备了MNO_(2)纳米棒和海胆微球,并原位掺杂5%Ag制备了Mn-Ag复合氧化物,利用SEM、XRD、BET、Raman等表征技术对其结构进行表征,并考察不同催化剂对甲苯的去除性能。结果表明:(NH_(4))_(2)S_(2)O_(8)的掺入量会对MNO_(2)的形貌产生影响,当其掺入量为2.28 g时,形成MNO_(2)纳米棒,当其掺入量为6.84 g时,形成MNO_(2)海胆微球;MNO_(2)纳米棒掺杂5%的Ag后,形貌未发生变化,但当MNO_(2)海胆微球掺杂5%Ag时,表面的纳米线较MNO_(2)海胆微球有所增长,且出现了缠绕现象,形成了空心鸟巢状结构;5%Ag掺杂后,对MNO_(2)纳米棒和MNO_(2)海胆微球的晶型未产生影响,均为α-MNO_(2),但5%Ag-MNO_(2)纳米棒出现了Mn2O_(3)的衍射峰;MNO_(2)海胆微球较MNO_(2)纳米棒的比表面积、孔径和孔容均增大,且Ag的掺杂进一步提高了MNO_(2)海胆微球的比表面积、孔径和孔容;MNO_(2)海胆微球比MNO_(2)纳米棒具有更好的甲苯去除性能,且5%Ag掺杂后,MNO_(2)海胆微球对甲苯的去除性能达到最好。