采用静电纺丝技术结合后续热处理制备了尖晶石型Li_(0.35)Zn_(0.3)Fe_(2.35)O_4微纳米纤维.利用差示扫描量热(DSC)-热重分析(TGA)、傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)和场发射扫描电子显微镜(FESEM)等手段研究了煅烧温度(700,80...采用静电纺丝技术结合后续热处理制备了尖晶石型Li_(0.35)Zn_(0.3)Fe_(2.35)O_4微纳米纤维.利用差示扫描量热(DSC)-热重分析(TGA)、傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)和场发射扫描电子显微镜(FESEM)等手段研究了煅烧温度(700,800,900,1000℃)对产物物相和形貌的影响;利用矢量网络分析仪分析了纤维状产物的吸波性能.研究结果表明,Li_(0.35)Zn_(0.3)Fe_(2.35)O_4在700℃及以上温度煅烧后可生成单一尖晶石结构.随着煅烧温度的升高,产物依次呈现出微纳米纤维状、三维网络状、竹节状和颗粒状的微观形貌.随着匹配厚度增加,微纳米纤维状Li_(0.35)Zn_(0.3)Fe_(2.35)O_4的最低反射率向低频移动,在8 GHz以下的最佳匹配厚度为6 mm,在此厚度下吸波性能优良,最低反射率为-26 d B,对应的吸收频率为5.0 GHz,低于-10 d B的吸收频带为4.0~8.0 GHz,带宽为4 GHz.展开更多
Ba\-\{0.5\}Sr\-\{0.5\}Co\-\{0.8\}Fe\-\{0.2\}O\-\{3-\%δ\%\} and Ba\-\{0.5\}Sr\-\{0.5\}Co\-\{0.8\}Ti\-\{0.2\}O\-\{3-\%δ\%\} oxides were synthesized by a combined EDTA\|citrate complexing method. The catalytic behavior...Ba\-\{0.5\}Sr\-\{0.5\}Co\-\{0.8\}Fe\-\{0.2\}O\-\{3-\%δ\%\} and Ba\-\{0.5\}Sr\-\{0.5\}Co\-\{0.8\}Ti\-\{0.2\}O\-\{3-\%δ\%\} oxides were synthesized by a combined EDTA\|citrate complexing method. The catalytic behavior of these two oxides with the perovskite structure was studied during the reaction of methane oxidation. The pre\|treatment with methane has different effect on the catalytic activities of both the oxides. The methane pre\|treatment has not resulted in the change of the catalytic activity of BSCFO owing to its excellent reversibility of the perovskite structure resulting from the excellent synergistic interaction between Co and Fe in the oxide. However, the substitution with Ti on Fe\|site in the lattice makes the methane pre\|treatment have an obvious influence on the activity of the formed BSCTO oxide.展开更多
基金supported by the Natural Science Foundation of Hebei Province,China(No.E2015506011)~~
文摘采用静电纺丝技术结合后续热处理制备了尖晶石型Li_(0.35)Zn_(0.3)Fe_(2.35)O_4微纳米纤维.利用差示扫描量热(DSC)-热重分析(TGA)、傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)和场发射扫描电子显微镜(FESEM)等手段研究了煅烧温度(700,800,900,1000℃)对产物物相和形貌的影响;利用矢量网络分析仪分析了纤维状产物的吸波性能.研究结果表明,Li_(0.35)Zn_(0.3)Fe_(2.35)O_4在700℃及以上温度煅烧后可生成单一尖晶石结构.随着煅烧温度的升高,产物依次呈现出微纳米纤维状、三维网络状、竹节状和颗粒状的微观形貌.随着匹配厚度增加,微纳米纤维状Li_(0.35)Zn_(0.3)Fe_(2.35)O_4的最低反射率向低频移动,在8 GHz以下的最佳匹配厚度为6 mm,在此厚度下吸波性能优良,最低反射率为-26 d B,对应的吸收频率为5.0 GHz,低于-10 d B的吸收频带为4.0~8.0 GHz,带宽为4 GHz.
文摘Ba\-\{0.5\}Sr\-\{0.5\}Co\-\{0.8\}Fe\-\{0.2\}O\-\{3-\%δ\%\} and Ba\-\{0.5\}Sr\-\{0.5\}Co\-\{0.8\}Ti\-\{0.2\}O\-\{3-\%δ\%\} oxides were synthesized by a combined EDTA\|citrate complexing method. The catalytic behavior of these two oxides with the perovskite structure was studied during the reaction of methane oxidation. The pre\|treatment with methane has different effect on the catalytic activities of both the oxides. The methane pre\|treatment has not resulted in the change of the catalytic activity of BSCFO owing to its excellent reversibility of the perovskite structure resulting from the excellent synergistic interaction between Co and Fe in the oxide. However, the substitution with Ti on Fe\|site in the lattice makes the methane pre\|treatment have an obvious influence on the activity of the formed BSCTO oxide.
