期刊文献+
共找到78篇文章
< 1 2 4 >
每页显示 20 50 100
Electrical and deep levels characteristics of ZnO/Si heterostructure by MOCVD deposition 被引量:5
1
作者 刘磁辉 刘秉策 付竹西 《Chinese Physics B》 SCIE EI CAS CSCD 2008年第6期2292-2296,共5页
ZnO films have been prepared on p-type Si substrates by metal-organic chemical vapour deposition (MOCVD) at different total gas flow rates. The current versus voltage and temperature (I - V - T) characteristics, t... ZnO films have been prepared on p-type Si substrates by metal-organic chemical vapour deposition (MOCVD) at different total gas flow rates. The current versus voltage and temperature (I - V - T) characteristics, the deep-level transient spectroscopy (DLTS) and the photoluminescence (PL) spectra of the samples were measured. DLTS shows two deep-level centres of E1 (Ec-0.13±0.02eV) and E2 (Ec-0.43±0.05eV) in sample 1202a, which has a ZnO/p-Si heterostructure. A deep level at Ec-0.13±0.01 eV was also obtained from the I -T characteristics. It was considered to be the same as E1 obtained from DLTS measurement. The emission related to this deep level center was detected by PL spectra. In addition, the energy location and the relative trap density of E1 was varied when the total gas flow rate was changed. 展开更多
关键词 MOCVD zno/Si heterostructure PL spectra deep-level emission
下载PDF
Electrochemical Synthesis of Novel Zn-Doped TiO_2 Nanotube/ZnO Nanoflake Heterostructure with Enhanced DSSC Efficiency 被引量:2
2
作者 Aijo John K Johns Naduvath +6 位作者 Sudhanshu Mallick Jacob W.Pledger S.K.Remillard P.A.De Young Manju Thankamoniamma T.Shripathi Rachel Reena Philip 《Nano-Micro Letters》 SCIE EI CAS 2016年第4期381-387,共7页
The paper reports the fabrication of Zn-doped TiO_2 nanotubes(Zn-TONT)/ZnO nanoflakes heterostructure for the first time,which shows improved performance as a photoanode in dye-sensitized solar cell(DSSC).The layered ... The paper reports the fabrication of Zn-doped TiO_2 nanotubes(Zn-TONT)/ZnO nanoflakes heterostructure for the first time,which shows improved performance as a photoanode in dye-sensitized solar cell(DSSC).The layered structure of this novel nanoporous structure has been analyzed unambiguously by Rutherford backscattering spectroscopy,scanning electron microscopy,and X-ray diffractometer.The cell using the heterostructure as photoanode manifests an enhancement of about an order in the magnitude of the short circuit current and a seven-fold increase in efficiency,over pure TiO_2 photoanodes.Characterizations further reveal that the Zn-TONT is preferentially oriented in [001] direction and there is a Ti metal-depleted interface layer which leads to better band alignment in DSSC. 展开更多
关键词 Zn-doped TiO2 nanotubes zno nanoflakes heterostructures DSSC
下载PDF
Self-Assembled Al Nanostructure/ZnO Quantum Dot Heterostructures for High Responsivity and Fast UV Photodetector 被引量:4
3
作者 Sisi Liu Ming‑Yu Li +4 位作者 Jianbing Zhang Dong Su Zhen Huang Sundar Kunwar Jihoon Lee 《Nano-Micro Letters》 SCIE EI CAS CSCD 2020年第9期96-108,共13页
Light confinement induced by spontaneous near-surface resonance is inherently determined by the location and geometry of metallic nanostructures(NSs),offering a facile and effective approach to break through the limit... Light confinement induced by spontaneous near-surface resonance is inherently determined by the location and geometry of metallic nanostructures(NSs),offering a facile and effective approach to break through the limitation of the light-mater interaction within the photoactive layers.Here,we demonstrate high-performance Al NS/ZnO quantum dots(Al/ZnO) heterostructure UV photodetectors with controllable morphologies of the self-assembled Al NSs.The Al/ZnO heterostructures exhibit a superior light utilization than the ZnO/Al heterostructures,and a strong morphological dependence of the Al NSs on the optical properties of the heterostructures.The inter-diffusion of Al atoms into ZnO matrixes is of a great benefit for the carrier transportation.Consequently,the optimal photocurrent of the Al/ZnO heterostructure photodetectors is significantly increased by 275 times to ~1.065 mA compared to that of the pristine ZnO device,and an outstanding photoresponsivity of 11.98 A W-1 is correspondingly achieved under 6.9 MW cm-2 UV light illumination at 10 V bias.In addition,a relatively fast response is similarly witnessed with the Al/ZnO devices,paving a path to fabricate the high-performance UV photodetectors for applications. 展开更多
关键词 Al/zno heterostructure photodetectors Plasmonic enhancement zno quantum dots Self-assembled Al nanostructures
下载PDF
Synergistic coupling of 0D-2D heterostructure from ZnO and Ti_(3)C_(2)T_(x)MXene-derived TiO_(2)for boosted NO_(2)detection at room temperature 被引量:1
4
作者 Hong-Peng Li Jie Wen +7 位作者 Shu-Mei Ding Jia-Bao Ding Zi-Hao Song Chao Zhang Zhen Ge Xue Liu Rui-Zheng Zhao Feng-Chao Li 《Nano Materials Science》 EI CAS CSCD 2023年第4期421-428,共8页
2D MXenes are highly attractive for fabricating high-precision gas sensors operated at room temperature(RT)due to their high surface-to-volume ratio.However,the limited selectivity and low sensitivity are still long-s... 2D MXenes are highly attractive for fabricating high-precision gas sensors operated at room temperature(RT)due to their high surface-to-volume ratio.However,the limited selectivity and low sensitivity are still long-standing challenges for their further applications.Herein,the self-assembly of 0D-2D heterostructure for highly sensitive NO_(2) detection was achieved by integrating ZnO nanoparticles on Ti_(3)C_(2)Tx MXene-derived TiO_(2) nanosheets(designated as ZnO@MTiO_(2)).ZnO nanoparticles can not only act as spacers to prevent the restacking of MTiO_(2) nanosheets and ensure effective transfer for gas molecules,but also enhance the sensitivity of the sensor the through trapping effect on electrons.Meanwhile,MTiO_(2) nanosheets facilitate gas diffusion for rapid sensor response.Benefiting from the synergistic effect of individual components,the ZnO@MTiO_(2)0D-2D heterostructure-based sensors revealed remarkable sensitivity and excellent selectivity to low concentration NO_(2) at RT.This work may facilitate the sensing application of MXene derivative and provide a new avenue for the development of high-performance gas sensors in safety assurance and environmental monitoring. 展开更多
关键词 MXene derivative heterostructure Gas sensors TiO_(2)zno
下载PDF
SiS_(2)/ZnO范德华异质结光催化水分解第一性原理研究
5
作者 李家豪 黄欣 杨志红 《原子与分子物理学报》 CAS 北大核心 2025年第6期31-36,共6页
基于第一性原理方法,研究了SiS_(2)/ZnO范德华异质结的电子结构和光催化性质.结果表明,SiS_(2)/ZnO异质结是带隙值为1.32 eV的半导体材料,表现出交错排列的能带结构.在异质结界面处,形成了从ZnO指向SiS_(2)的内置电场,该内置电场的存在... 基于第一性原理方法,研究了SiS_(2)/ZnO范德华异质结的电子结构和光催化性质.结果表明,SiS_(2)/ZnO异质结是带隙值为1.32 eV的半导体材料,表现出交错排列的能带结构.在异质结界面处,形成了从ZnO指向SiS_(2)的内置电场,该内置电场的存在使得SiS_(2)/ZnO异质结中形成了特殊的“Z-型”载流子迁移模式,有利于电子空穴对的有效分离,同时增强了载流子的氧化还原能力.异质结构具有良好的热力学稳定性,且带边位置跨越水的氧化还原电位.与单层材料相比,SiS_(2)/ZnO异质结光吸收谱出现红移现象,表现出更宽的光吸收范围(从可见光到紫外光)及更强的光吸收强度(达到10~5 cm^(-1)量级).另外,通过施加双轴应变,可以有效调控SiS_(2)/ZnO异质结的带隙值.以上结果表明SiS_(2)/ZnO异质结有潜力成为新型光催化剂用于全解水. 展开更多
关键词 SiS_(2)/zno Z-型范德华异质结 光催化 电子结构 第一性原理
下载PDF
Current transport in ZnO/Si heterostructure grown by laser molecular beam epitaxy
6
作者 滕晓云 吴艳华 +2 位作者 于威 高卫 傅广生 《Chinese Physics B》 SCIE EI CAS CSCD 2012年第9期440-444,共5页
The n-ZnO/p-Si heterojunction was fabricated by depositing high quality single crystalline aluminium-doped n-type ZnO film on p-type Si using the laser molecular beam epitaxy technique. The heterojunction exhibited a ... The n-ZnO/p-Si heterojunction was fabricated by depositing high quality single crystalline aluminium-doped n-type ZnO film on p-type Si using the laser molecular beam epitaxy technique. The heterojunction exhibited a good rectifying behavior. The electrical properties of the heterojunction were investigated by means of temperature dependence current density-voltage measurements. The mechanism of the current transport was proposed based on the band structure of the heterojunction. When the applied bias V is lower than 0.15 V, the current follows the Ohmic behavior. When 0.15 V ~ V 〈 0.6 V, the transport property is dominated by diffusion or recombination in the junction space charge region, while at higher voltages (V 〉 0.6 V), the space charge limited effect becomes the main transport mechanism. The current-voltage characteristic under illumination was also investigated. The photovoltage and the short circuit current density of the heterojunction aproached 270 mV and 2.10 mA/cm^2, respectively. 展开更多
关键词 zno/Si heterostructure current transport laser molecular beam epitaxy
下载PDF
Comparative Study on the Effects of Surface Area, Conduction Band and Valence Band Positions on the Photocatalytic Activity of ZnO-M<sub>x</sub>O<sub>y</sub>Heterostructures
7
作者 Mysore Byrappa Nayan Krishnegowda Jagadish +2 位作者 Mavinakere Ramesh Abhilash Keerthiraj Namratha Shivanna Srikantaswamy 《Journal of Water Resource and Protection》 2019年第3期357-370,共14页
ZnO-MxOy heterostructures (M=Co, Mn, Ni, or In) are fabricated via hydrothermal synthesis method. X-ray diffraction and Fourier-transform infrared spectroscopy analyses endorse the successive formation of the various ... ZnO-MxOy heterostructures (M=Co, Mn, Ni, or In) are fabricated via hydrothermal synthesis method. X-ray diffraction and Fourier-transform infrared spectroscopy analyses endorse the successive formation of the various heterostructures. Field Emission Scanning electron microscope and Brunauer-Emmett-Teller (BET) surface area studies confirm the porous nature of the heterostructures obtained. The band gaps of various heterostructures are calculated that, 3.1, 2.71, 2.64, and 2.19 eV for ZnO-NiO, ZnO-In2O3, ZnO-Co3O4, and ZnO-MnO2, respectively. The photocatalytic activities of the fabricated heterostructures are investigated through the degradation of phenol under direct sunlight irradiation. The results show that the photocatalytic activity is affected by the conduction band (CB) and valence band (VB) positions rather than surface area of ZnO-MxOy heterostructure nanocomposites. 展开更多
关键词 Metal Oxide heterostructureS zno-MxOy Nanocomposites Hydrothermal Synthesis Solar-Driven Photocatalysis Phenol Degradation
下载PDF
Type-Ⅱ Core/Shell Nanowire Heterostructures and Their Photovoltaic Applications 被引量:3
8
作者 Yiyan Cao Zhiming Wu +5 位作者 Jianchao Ni Waseem.A.Bhutto Jing Li Shuping Li Kai Huang Junyong Kang 《Nano-Micro Letters》 SCIE EI CAS 2012年第3期135-141,共7页
Nanowire-based photovoltaic devices have the advantages over planar devices in light absorption and charge transport and collection.Recently,a new strategy relying on type-Ⅱ band alignment has been proposed to facili... Nanowire-based photovoltaic devices have the advantages over planar devices in light absorption and charge transport and collection.Recently,a new strategy relying on type-Ⅱ band alignment has been proposed to facilitate efficient charge separation in core/shell nanowire solar cells.This paper reviews the type-Ⅱ heterojunction solar cells based on core/shell nanowire arrays,and specifically focuses on the progress of theoretical design and fabrication of type-Ⅱ Zn O/Zn Se core/shell nanowire-based solar cells.A strong photoresponse associated with the type-Ⅱ interfacial transition exhibits a threshold of 1.6 e V,which demonstrates the feasibility and great potential for exploring all-inorganic versions of type-Ⅱ heterojunction solar cells using wide bandgap semiconductors.Future prospects in this area are also outlooked. 展开更多
关键词 Type-Ⅱ heterostructures Core/shell nanowire solar cell zno/ZnSe
下载PDF
新型泡沫镍模板Ti_(3)C_(2)T_(x)@ZnO复合材料光降解RhB应用研究
9
作者 黄超 李孟遥 战光辉 《陶瓷学报》 CAS 北大核心 2024年第5期993-1002,共10页
工业染料废水的净化对缓解水资源危机至关重要,但传统的金属氧化物半导体光催化降解方法存在成本高、效率低等问题。与之形成鲜明对比的是,MXenes材料因其高比表面积和优秀的导电性,尤其是经过剥离的片状MXenes材料,在光照下展示出了卓... 工业染料废水的净化对缓解水资源危机至关重要,但传统的金属氧化物半导体光催化降解方法存在成本高、效率低等问题。与之形成鲜明对比的是,MXenes材料因其高比表面积和优秀的导电性,尤其是经过剥离的片状MXenes材料,在光照下展示出了卓越的电荷转移能力,MXenes材料的利用开辟了光催化反应的新途径。特别是,MXenes如Ti_(3)C_(2)T_(x)与传统ZnO相比,在催化效率和稳定性上都有显著提升。本研究将ZnO与Ti_(3)C_(2)T_(x)结合,制备了一种高比表面积的光催化复合材料,既增加了活性位点,也显著提高了光催化效率。通过水热法,成功将单层Ti_(3)C_(2)T_(x)涂覆在泡沫镍上,并在其上生长ZnO纳米棒,制备出高效的光催化降解材料。实验结果表明,性能最优的材料能在100 min内将RhB的降解率提升至97.7%,同时也有效降解了四环素和对氯苯酚。这证明MXenes材料和金属氧化物复合材料在光催化染料降解领域具有巨大的应用潜力。 展开更多
关键词 zno MXenes 光催化 异质结构 罗丹明B
下载PDF
Ag/ZnO纳米纤维的制备及光催化性能(英文) 被引量:13
10
作者 孙连志 赵圣哲 +1 位作者 高志伶 程志强 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2017年第6期907-914,共8页
采用静电纺丝技术及煅烧法制备了氧化锌纳米纤维,然后采用水热法将银纳米颗粒负载到了氧化锌纳米纤维表面.利用X射线衍射(XRD)、X射线光电子能谱(XPS)、能量色散X射线光谱(EDX)、扫描电子显微镜(SEM)及透射电子显微镜(TEM)等技术对合成... 采用静电纺丝技术及煅烧法制备了氧化锌纳米纤维,然后采用水热法将银纳米颗粒负载到了氧化锌纳米纤维表面.利用X射线衍射(XRD)、X射线光电子能谱(XPS)、能量色散X射线光谱(EDX)、扫描电子显微镜(SEM)及透射电子显微镜(TEM)等技术对合成的Ag/ZnO纳米纤维的结构和组成进行了表征.SEM结果表明,直径在5~100 nm之间的银纳米颗粒附着在直径在80~330 nm之间的氧化锌纤维表面形成了异质结构.以常见的有机污染物甲基橙、亚甲基蓝和罗丹明B等为降解底物,对Ag/ZnO纳米纤维的光催化性能进行了表征.结果表明,负载银纳米颗粒后,复合催化剂的光催化性能明显提高. 展开更多
关键词 静电纺丝 氧化锌 纳米颗粒 异质结构 水热法
下载PDF
合成ZnO纳米阵列及刺突状CuO/ZnO异质结(英文) 被引量:3
11
作者 李湘奇 范庆飞 +5 位作者 李广立 黄瑶翰 高照 范希梅 张朝良 周祚万 《物理化学学报》 SCIE CAS CSCD 北大核心 2015年第4期783-792,共10页
采用低温水热法在掺氟Sn O2(FTO)导电玻璃表面制备Zn O纳米阵列,研究了前驱体溶液浓度摩尔配比对Zn O纳米阵列形貌、光学性能及其生长机理的影响.研究发现,随着前驱体溶液浓度摩尔配比的增加,Zn O纳米阵列形貌及光学性能也随之变化.Zn ... 采用低温水热法在掺氟Sn O2(FTO)导电玻璃表面制备Zn O纳米阵列,研究了前驱体溶液浓度摩尔配比对Zn O纳米阵列形貌、光学性能及其生长机理的影响.研究发现,随着前驱体溶液浓度摩尔配比的增加,Zn O纳米阵列形貌及光学性能也随之变化.Zn O纳米阵列高度逐渐降低,Zn O纳米阵列直径和光学带隙值大体上出现先增大后降低的趋势.而当前驱体溶液(Zn(NO3)2:环六亚甲基四胺(HMT,C6H12N4))浓度摩尔配比为5:5时,其光学禁带值(3.2 e V)接近于理论值.结果显示制备Zn O纳米阵列的最优浓度摩尔配比为5:5.随后选用最优浓度摩尔配比下制备的Zn O纳米阵列为基底,通过一种两步溶液法成功在其表面制备刺突状Cu O/Zn O异质结.从场发射扫描电镜(FE-SEM)结果中可以清楚看见,大量的Cu O纳米粒子沉积在Zn O纳米阵列表面形成刺突状异质结结构.研究发现该Cu O/Zn O纳米异质结相对于纯Zn O纳米阵列在紫外光下光催化性能明显增加.最后,讨论了Cu O/Zn O纳米异质结光催化机理. 展开更多
关键词 ZN O纳米阵列 Cu O/Zn O异质结 水热法 光学性能 摩尔比
下载PDF
ZnS/ZnO异质结构的制备及其光催化性能 被引量:6
12
作者 崔磊 董晶 +2 位作者 杨丽娟 王帆 夏炜炜 《精细化工》 EI CAS CSCD 北大核心 2018年第4期580-584,共5页
以醋酸锌、硫脲为原料,采用简单的一步溶剂热法合成了花状Zn S微球,并分别在550、600和650℃下进行高温氧化处理,获得了Zn S/ZnO异质结构半导体材料。利用XRD、SEM、EDS、表面积分析仪、拉曼光谱仪和UV-Vis对材料的形貌、结构、比表面... 以醋酸锌、硫脲为原料,采用简单的一步溶剂热法合成了花状Zn S微球,并分别在550、600和650℃下进行高温氧化处理,获得了Zn S/ZnO异质结构半导体材料。利用XRD、SEM、EDS、表面积分析仪、拉曼光谱仪和UV-Vis对材料的形貌、结构、比表面积和光学性质进行了测定,并以罗丹明B(Rh B)为模型污染物考察了样品的光催化性能。结果表明:原位合成的样品为立方相Zn S微球,经过550℃高温氧化1 h后,由于O原子的进入,生成少量ZnO,经过600℃高温氧化1 h后形成了Ⅱ型异质结构Zn S/ZnO,经过650℃高温氧化1 h后,样品基本上成为ZnO。随着高温氧化温度的升高,样品的禁带宽度整体呈下降趋势。光催化结果显示:Zn S/ZnO异质结构具备较优的光催化性能,紫外光照射40 min,Rh B降解率达到98.5%。 展开更多
关键词 水热法 ZnS/zno异质结构 高温氧化 光催化性能 功能材料
下载PDF
Ag3PO4/ZnO@碳球三元异质结的合成及可见光催化性能 被引量:3
13
作者 赵晓华 魏崇 +4 位作者 苏帅 崔佳宝 周建国 李彩珠 娄向东 《材料工程》 EI CAS CSCD 北大核心 2019年第7期76-83,共8页
以片花状的ZnO@碳球(ZnO@C)为前驱物,采用原位沉淀法使Ag3PO4颗粒生长在其表面形成Ag3PO4/ZnO@碳球(Ag3PO4/ZnO@C)三元复合物。利用XRD,SEM,Raman,UV-VisDRS及瞬态光电流响应等技术对合成样品进行表征,并测试其可见光催化性能。结果表明... 以片花状的ZnO@碳球(ZnO@C)为前驱物,采用原位沉淀法使Ag3PO4颗粒生长在其表面形成Ag3PO4/ZnO@碳球(Ag3PO4/ZnO@C)三元复合物。利用XRD,SEM,Raman,UV-VisDRS及瞬态光电流响应等技术对合成样品进行表征,并测试其可见光催化性能。结果表明:ZnO@C的引入能够显著提高Ag3PO4的光催化性能,其中5%(质量分数)ZnO@C与Ag3PO4的复合物AP-Z-5光催化效果最佳。在5mg/LFe(NO3)3牺牲剂存在的情况下,AP-Z-5在20min内能完全降解亚甲基蓝,光催化循环4次后仍保持86%的降解能力。AP-Z-5在Cr(VI)与亚甲基蓝混合废水中对亚甲基蓝依然能保持较高的光催化降解能力。 展开更多
关键词 Ag3PO4 zno 碳球 异质结 可见光催化
下载PDF
氧离子束辅助激光淀积生长ZnO/Si的XPS研究 被引量:6
14
作者 李庚伟 吴正龙 +3 位作者 杨锡震 杨少延 张建辉 刘志凯 《北京师范大学学报(自然科学版)》 CAS CSCD 北大核心 2001年第2期174-179,共6页
利用X射线光电子能谱深度剖析方法对ZnO/Si异质结构进行了分析 .用该法可生长出正化学比的ZnO ,不过生长的ZnO薄膜存在孔隙 ,工艺还有待进一步改进 .
关键词 zno/Si异质结构 X射线光电子能谱 氧离子束辅助 薄膜 激光器
下载PDF
CdS/ZnO异质结构材料的光生电荷性质 被引量:6
15
作者 王凌凌 杨文胜 +1 位作者 王德军 谢腾峰 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2010年第12期2316-2318,共3页
CdS纳米材料由于具有良好的可见光光电性质而成为太阳能利用研究中的热点[1],特别是近年来对CdS进行修饰和改性构成具有异质界面的复合材料,能够提高光生电荷的分离效率,减缓光腐蚀,
关键词 CdS/zno异质结构 表面光伏相位谱 瞬态表面光伏 光生电荷转移
下载PDF
Mg_xZn_(1-x)O单晶薄膜和MgZnO/ZnO异质结构的光学性质 被引量:3
16
作者 吴春霞 吕有明 +5 位作者 申德振 李炳辉 张振中 刘益春 张吉英 范希武 《Journal of Semiconductors》 EI CAS CSCD 北大核心 2004年第10期1258-1263,共6页
报道了利用等离子辅助分子束外延技术 ,在蓝宝石 c平面上外延生长的 Mgx Zn1 - x O单晶薄膜以及 Mg Zn O/Zn O异质结构的光学性质 .室温下随着 Mg浓度增加 ,合金薄膜样品的发光峰与吸收边均向高能侧移动 .研究了样品紫外发光的起因 ,将 ... 报道了利用等离子辅助分子束外延技术 ,在蓝宝石 c平面上外延生长的 Mgx Zn1 - x O单晶薄膜以及 Mg Zn O/Zn O异质结构的光学性质 .室温下随着 Mg浓度增加 ,合金薄膜样品的发光峰与吸收边均向高能侧移动 .研究了样品紫外发光的起因 ,将 Mgx Zn1 - x O合金薄膜的发光归结为束缚激子的复合 .在 Mg0 .0 8Zn0 .92 O/ Zn O样品中 ,观察到了分别来自于 Zn O层和 Mg Zn O盖层的发光和吸收 ,并将其归因于来自 Zn O层的自由激子和 Mg Zn 展开更多
关键词 等离子体辅助分子束外延 MgxZn1-xO合金 Mgzno/zno异质结构 光致发光谱 反射式高能电子衍射
下载PDF
Ag-Ag_2Se共敏化ZnO花-棒异质结构的合成及其光电化学特性 被引量:3
17
作者 韩志钟 韦力瑗 +3 位作者 郭晔 潘海波 陈建中 陈耐生 《无机化学学报》 SCIE CAS CSCD 北大核心 2013年第9期1856-1862,共7页
采用水相法合成ZnO花-棒(ZFRs)有序阵列结构,同时利用离子交换法,制备Ag和Ag2Se量子点共敏化光ZnO光阳极(AA-ZFRs)。通过扫描电子显微镜(SEM)、X射线粉末衍射(XRD)、X射线能量色散谱(EDS)和透射电子显微镜(TEM)等手段对样品进行了分析... 采用水相法合成ZnO花-棒(ZFRs)有序阵列结构,同时利用离子交换法,制备Ag和Ag2Se量子点共敏化光ZnO光阳极(AA-ZFRs)。通过扫描电子显微镜(SEM)、X射线粉末衍射(XRD)、X射线能量色散谱(EDS)和透射电子显微镜(TEM)等手段对样品进行了分析和表征,并测试其光电化学特性以及量子效应。结果表明,Ag-Ag2Se共敏化ZnO花-棒三维有序结构对太阳光的吸收范围延展至近红外区(750 nm),并且在敏化层与ZnO基质界面形成异质结,有效的抑制光生电子-空穴对复合,增强光转换量子效应,从而提高光电化学性能,开路电压达到-0.77 V,短路电流为0.64 mA。 展开更多
关键词 zno花-棒 Ag-Ag2Se共敏化 量子点 光电化学特性
下载PDF
复合纳米棒状Ag3PO4/ZnO材料的光催化性能 被引量:5
18
作者 黄凤萍 刘博学 +3 位作者 崔梦丽 辛萌 周鑫敏 丁力 《精细化工》 EI CAS CSCD 北大核心 2020年第1期156-161,共6页
以一维棒状ZnO为载体,采用原位生长法制备纳米棒状Ag3PO4/ZnO复合材料。通过XRD、SEM、TEM、XPS和UV-Vis-DRS等测试对纳米棒状Ag3PO4/ZnO复合材料进行了表征,并评价了样品在可见光下的光催化性能。结果显示,ZnO几乎无可见光活性,通过水... 以一维棒状ZnO为载体,采用原位生长法制备纳米棒状Ag3PO4/ZnO复合材料。通过XRD、SEM、TEM、XPS和UV-Vis-DRS等测试对纳米棒状Ag3PO4/ZnO复合材料进行了表征,并评价了样品在可见光下的光催化性能。结果显示,ZnO几乎无可见光活性,通过水热法制备的ZnO形貌发生了改变,为比表面积的增加做出了贡献,为Ag3PO4提供了更多的负载可能。在可见光照射下,纯ZnO和Ag3PO4对苯酚的降解率分别为20%和38%,复合材料Ag3PO4/ZnO对苯酚的降解率为91.24%,光催化降解性能明显高于纯ZnO和Ag3PO4。最后,光催化稳定性的研究证明,Ag3PO4/ZnO复合材料形成了有效的异质结结构,抑制了电子-空穴的复合,提高了Ag3PO4/ZnO复合材料的稳定性。 展开更多
关键词 Ag3PO4/zno Ag3PO4 棒状zno 水热法 异质结 水处理技术
下载PDF
新型ZnO/BiOI杂化纳米花的合成及可见光驱动抗菌活性(英文) 被引量:3
19
作者 刘俊莉 邵建真 +2 位作者 李军奇 刘辉 谢乔 《材料导报》 EI CAS CSCD 北大核心 2019年第2期205-210,共6页
通过简单的水热法成功制备了新型三维异质结抗菌剂ZnO/BiOI杂化纳米花。采用X射线粉末衍射仪、扫描电镜、高分辨透射电镜、Brunauer-Emmett-Teller、X射线光电子能谱仪等对所得材料进行了表征。此外,研究了ZnO/BiOI杂化纳米花在可见光... 通过简单的水热法成功制备了新型三维异质结抗菌剂ZnO/BiOI杂化纳米花。采用X射线粉末衍射仪、扫描电镜、高分辨透射电镜、Brunauer-Emmett-Teller、X射线光电子能谱仪等对所得材料进行了表征。此外,研究了ZnO/BiOI杂化纳米花在可见光下对大肠杆菌(E. Coli)的抗菌活性。结果表明,与ZnO(56%)和BiOI(74%)相比,ZnO/BiOI异质结对大肠杆菌(E. Coli)的抗菌活性最强(93%)。这是由于ZnO/BiOI异质结高的比表面积,以及电荷从ZnO表面有效地转移到BiOI表面,有助于形成羟基自由基。研究表明,两种不同半导体之间的异质结构对于其光生载流子的动态特性起着非常重要的作用。 展开更多
关键词 zno/BiOI杂化纳米花 异质结 大肠杆菌 抗菌活性
下载PDF
花状ZnO/ZnS异质结构的简易合成、结构表征及光催化活性(英文) 被引量:2
20
作者 李本侠 王艳芬 吴玉雷 《无机化学学报》 SCIE CAS CSCD 北大核心 2012年第2期417-424,共8页
采用简便的两步溶液相化学方法,在较低温度下(80℃),制备出了花状的ZnO/ZnS异质结构。分别利用X射线衍射、X射线光电子能谱仪、扫描电子显微镜、透射电子显微镜、紫外-可见光谱仪等测试手段对所制备的样品进行表征,结果表明ZnO/ZnS异质... 采用简便的两步溶液相化学方法,在较低温度下(80℃),制备出了花状的ZnO/ZnS异质结构。分别利用X射线衍射、X射线光电子能谱仪、扫描电子显微镜、透射电子显微镜、紫外-可见光谱仪等测试手段对所制备的样品进行表征,结果表明ZnO/ZnS异质结构是由花状ZnO纳米结构和ZnS纳米粒子组成。在光降解罗丹明B(RhB)的测试中,ZnO/ZnS异质结构样品体现出了比ZnO前驱物和商业P25光催化剂更高的光催化效率,这主要可归因于异质结构更有利于电子-空穴的有效分离。ZnO/ZnS光催化剂体现出良好的循环稳定性。 展开更多
关键词 zno/ZnS异质结构 化学合成 微结构 光催化
下载PDF
上一页 1 2 4 下一页 到第
使用帮助 返回顶部