In the selective oxidation of biomass-based 1,2-propanediol(PDO)with oxygen as the terminal oxidant,it is challenging to improve the lactic acid(LA)selectivity for nonnoble metal nanoparticles(NPs)due to their limited...In the selective oxidation of biomass-based 1,2-propanediol(PDO)with oxygen as the terminal oxidant,it is challenging to improve the lactic acid(LA)selectivity for nonnoble metal nanoparticles(NPs)due to their limited oxygen reduction rate and easy C-C cleavage.Given the high economic feasibility of nonnoble metals,i.e.,Cu,in this work,copper and nitrogen codoped porous carbon nanosheets encapsulating ultrafine Cu nanoparticles(Cu@Cu-N-C)were developed to realize highly selective of PDO oxidation to LA.The carbon-encapsulated ultrasmall Cu^(0)NPs in Cu@Cu-N-C have high PDO dehydrogenation activity while N-coordinated Cu(Cu-N)sites are responsible for the high oxygen reduction efficacy.Therefore,the performance of catalytic PDO conversion to LA is optimized by a proposed pathway of PDO→hydroxylacetone→lactaldehyde→LA.Specifically,the enhanced LA selectivity is 88.5%,and the PDO conversion is up to 75.1%in an O_(2)-pressurized reaction system(1.0 MPa O_(2)),superior to other Cu-based catalysts,while in a milder nonpressurized system(O_(2)flow rate of 100 mL min-1),a remarkable LA selectivity(94.2%)is obtained with 39.8%PDO conversion,2.2 times higher than that of supported Au nanoparticles(1%Au/C).Moreover,carbon encapsulation offers Cu@Cu-N-C with strong leaching resistance for better recycling.展开更多
The ZnO molecule plays an important role in the industry due to it special features, anti-corrosion anti-bacterial properties, as well as due to its low electrical conductivity and heat resistance. In these experiment...The ZnO molecule plays an important role in the industry due to it special features, anti-corrosion anti-bacterial properties, as well as due to its low electrical conductivity and heat resistance. In these experimental researches, the sol-gel method was chosen, which enables control of nucleation, aging and growth of particles in the solution. ZnO synthesis was prepared utilizing chemical method with Zinc acetate dyhidrate and NaOH with the appropriate methanol solvent and heating (60˚C). The methods used in identification and characterization are FTIR, UV/VIS, OPTICAL MICROSCOPY, SEM and XRD. The FTIR spectra of synthesized ZnO with corresponding ones show characteristic bands at the corresponding wavelengths, which confirm the presence of ZnO nanoparticles. SEM characterization of ZnO shows the morphology of needle-shaped nanoparticles. XRD spectar in this research by chemical method indicates the particle size of 17.76 nm.展开更多
Objective:To synthesize zinc oxide nanoparticles(ZnONPs)and evaluate their antibacterial and wound healing effects against wounds infected with methicillin-resistant Staphylococcus aureus(MRSA).Methods:ZnONPs were pre...Objective:To synthesize zinc oxide nanoparticles(ZnONPs)and evaluate their antibacterial and wound healing effects against wounds infected with methicillin-resistant Staphylococcus aureus(MRSA).Methods:ZnONPs were prepared by sol-gel method and characterized by X-ray diffraction(XRD)analysis and scanning electron microscopy(SEM).A total of 18 rabbits were divided into three groups:the ZnONPs group,the gentamicin group and the control group.A wound of 3 cm^(2) was inflicted on each rabbit and contaminated with MRSA inoculum.Treatment was started from the fourth day post-surgery.Wound healing,microbiological analysis,and histopathological analysis were performed to assess the efficacy of ZnONPs ointment.Results:XRD analysis confirmed the hexagonal wurtzite structure of the ZnONPs with an average crystallite size of 29.23 nm.SEM revealed discoid-shaped ZnONPs with a rough surface and an average size of 48.36 nm.Energy-dispersive X-ray analysis confirmed the purity of ZnONPs.Moreover,the particle size ranged from 100-700 nm with a high agglomeration trend.Treatment with ZnONPs promoted MRSA-infected wound healing.In addition,ZnONPs showed a good antibacterial effect as evidenced by a dose-dependent increase in the zone of inhibition.Conclusions:ZnONPs accelerate the healing of MRSA-infected wounds.Therefore,it can be explored for the treatment of MRSA infection.展开更多
Cu doped Mg(OH)_(2) nanoparticles were synthesized with varying concentrations from 0 to 10%by a chemical synthesis technique of coprecipitation.X-rays diffraction (XRD) of the samples confirms that all the samples ac...Cu doped Mg(OH)_(2) nanoparticles were synthesized with varying concentrations from 0 to 10%by a chemical synthesis technique of coprecipitation.X-rays diffraction (XRD) of the samples confirms that all the samples acquire the hexagonal crystal structure.XRD results indicated the solubility limit of dopant in the host material and the secondary phase of CuO was observed beyond 3%Cu doping in Mg(OH)_(2).The reduction in the size of nanoparticles was observed from 166 to 103 nm for Mg(OH)_(2) and 10% Cu doped Mg(OH)_(2)samples,respectively.The shift in absorption spectra exhibited the systematical enhancement in optical bandgap from 5.25 to 6.085 eV.A good correlation was observed between the bandgap energy and crystallite size of the nanocrystals which confirmed the size induced effect in the nanoparticles.The transformation in the sample morphology was observed from irregular spherical particles to sepals like shapes with increasing the Cu concentration in the host material.The energy dispersive X-Ray (EDX) analysis confirmed the purity of mass percentage composition of the elements present in the samples.展开更多
Cu- and Ni-codoped FeZnO particles with the wurzite structure were successfully synthesized at low temperature by a co-precipitation method. The samples were characterized using a vibrating sample magnetometer, X-ray ...Cu- and Ni-codoped FeZnO particles with the wurzite structure were successfully synthesized at low temperature by a co-precipitation method. The samples were characterized using a vibrating sample magnetometer, X-ray diffraction, energy dispersive X-ray spectroscopy, UV-Vis spectrophotometry and electron spin resonance. The results demonstrated that room temperature ferromagnetic order was observed in both samples and the magnetization was higher than that of Fe-doped ZnO. The correlation between the structural and magnetic properties is discussed.展开更多
ZnO nanoparticles were synthesized via precipitation-pyrolysis (P&P), where the precursor zinc hydroxide carbonate (Zn5(CO3)2(OH)6) was obtained and then pyrolyzed. The results of TEM indicate that pyrolysis tempe...ZnO nanoparticles were synthesized via precipitation-pyrolysis (P&P), where the precursor zinc hydroxide carbonate (Zn5(CO3)2(OH)6) was obtained and then pyrolyzed. The results of TEM indicate that pyrolysis temperature is the predominant factor for controlling mean sizes of nanoparticles, ranging from 8 nm to 80 nm. Increasing the pyrolysis temperature enhances the mean size. The results of XRD show that nanoparticles are all of crystalline zincite. The mean size observed by TEM is in agreement with that calculated from the specific surface area(SSA) and the crystalline size calculated from the XRD patterns, indicating that the primary particles are rather uniform in size and have single crystals. The growth behaviors of epitaxy along the C-axis are responsible for the morphology of ZnO changing from sphere to rod-like shape, and then to reticulation. Compared with other synthesis approaches, P&P can get fairly good product with a relatively low cost.展开更多
Zn（1-x）Cux O（x=0.00, 0.01, 0.03, and 0.05） nanoparticles are synthesized via the sol-gel technique using gelatin and nitrate precursors. The impact of copper concentration on the structural, optical, and antibacte...Zn（1-x）Cux O（x=0.00, 0.01, 0.03, and 0.05） nanoparticles are synthesized via the sol-gel technique using gelatin and nitrate precursors. The impact of copper concentration on the structural, optical, and antibacterial properties of these nanoparticles is demonstrated. Powder x-ray diffraction investigations have illustrated the organized Cu doping into ZnO nanoparticles up to Cu concentration of 5%（x = 0.05）. However, the peak corresponding to CuO for x= 0.01 is not distinguishable. The images of field emission scanning electron microscopy demonstrate the existence of a nearly spherical shape with a size in the range of 30–52 nm. Doping Cu creates the Cu–O–Zn on the surface and results in a decrease in the crystallite size. Photoluminescence and absorption spectra display that doping Cu causes an increment in the energy band gap. The antibacterial activities of the nanoparticles are examined against Escherichia coli（Gram negative bacteria）cultures using optical density at 600 nm and a comparison of the size of inhibition zone diameter. It is found that both pure and doped ZnO nanoparticles indicate appropriate antibacterial activity which rises with Cu doping.展开更多
Amino-functionalized magnetic nanoparticle （NH2-MNP） were prepared by a sol-gel approach. The adsorption behavior of Cu（II） ions on NH2-MNP was discussed systematically by batch experiments. The effects of initial...Amino-functionalized magnetic nanoparticle （NH2-MNP） were prepared by a sol-gel approach. The adsorption behavior of Cu（II） ions on NH2-MNP was discussed systematically by batch experiments. The effects of initial Cu（II） ions concentration, time, pH and temperature were investigated. In kinetic studies, the pseudo-second-order model was successfully employed, and the pseudo-first-order model substantiated that Cu（II） adsorption on NH2-MNP was a diffusion-based process. Langmuir model and Dubinin-Radushkevich model （R2〉0.99） were more corresponded with the adsorption isotherm data of Cu（II） ions than Freundlich model. The adsorption capacity was increased with the increment of temperature and pH. NH2-MNP remains excellent Cu（II） recoveries after reusing five adsorption and desorption cycles, making NH2-MNP a promising candidate for repetitively removing heavy metal ions from environmental water samples. According to the results obtained from adsorption activation energy and thermodynamic studies, it can be inferred that the main adsorption mechanism between absorbent and Cu（II） ions is ion exchange-surface complexation.展开更多
Cu2O@Cu2O core-shell nanoparticles (NPs) were prepared by using solution phase strategy. It was found that Cu2O@Cu2O NPs were easily converted to Cu2O@Cu NPs with the help of polyvinylpyrrolidine (PVP) and excessive a...Cu2O@Cu2O core-shell nanoparticles (NPs) were prepared by using solution phase strategy. It was found that Cu2O@Cu2O NPs were easily converted to Cu2O@Cu NPs with the help of polyvinylpyrrolidine (PVP) and excessive ascorbic acid (AA) in air at room temperature, which was an interesting phenomenon. The features of the two kinds of NPs were characterized by XRD, TEM and extinction spectra. Cu2O@Cu NPs with different shell thicknesses showed wide tunable optical properties for the localized surface plasmon (LSP) in metallic Cu. But Cu2O@Cu2O NPs did not indicate this feature. FTIR results reveal that Cu+ ions on the surface of Cu2O shell coordinate with N and O atoms in PVP and are further reduced to metallic Cu by excessive AA and then form a nucleation site on the surface of Cu2O nanocrystalline. PVP binds onto different sites to proceed with the reduction utill all the Cu sources in Cu2O shell are completely assumed.展开更多
Cu nanoparticles were prepared by reducing Cu2＋ ions with ascorbic acid through aqueous solution reduction method. The effects of solution pH and average size of Cu2O particles on the preparation of Cu nanoparticles ...Cu nanoparticles were prepared by reducing Cu2＋ ions with ascorbic acid through aqueous solution reduction method. The effects of solution pH and average size of Cu2O particles on the preparation of Cu nanoparticles were investigated. Cu particles were prepared at pH 3, 5 or 7, with the smallest Cu particles obtained at pH 7. However, Cu particles could not be prepared at pH 9 or 11. The average size of Cu2O particles can affect that of Cu particles. Larger Cu2O particles result in larger Cu particles. In addition, experiments were conducted to explore the reaction process by measuring the X-ray diffraction （XRD） patterns of specimens collected at different time points during the reaction. It was found that Cu（OH）2 was initially formed as a precursor, followed by the formation of Cu2O, which was finally reduced to Cu particles.展开更多
The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions f...The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.展开更多
基金supported by the National Natural Science Foundation of China(32371407,82160421)the Natural Science Foundation of Jiangsu Province(BK20211322)。
文摘In the selective oxidation of biomass-based 1,2-propanediol(PDO)with oxygen as the terminal oxidant,it is challenging to improve the lactic acid(LA)selectivity for nonnoble metal nanoparticles(NPs)due to their limited oxygen reduction rate and easy C-C cleavage.Given the high economic feasibility of nonnoble metals,i.e.,Cu,in this work,copper and nitrogen codoped porous carbon nanosheets encapsulating ultrafine Cu nanoparticles(Cu@Cu-N-C)were developed to realize highly selective of PDO oxidation to LA.The carbon-encapsulated ultrasmall Cu^(0)NPs in Cu@Cu-N-C have high PDO dehydrogenation activity while N-coordinated Cu(Cu-N)sites are responsible for the high oxygen reduction efficacy.Therefore,the performance of catalytic PDO conversion to LA is optimized by a proposed pathway of PDO→hydroxylacetone→lactaldehyde→LA.Specifically,the enhanced LA selectivity is 88.5%,and the PDO conversion is up to 75.1%in an O_(2)-pressurized reaction system(1.0 MPa O_(2)),superior to other Cu-based catalysts,while in a milder nonpressurized system(O_(2)flow rate of 100 mL min-1),a remarkable LA selectivity(94.2%)is obtained with 39.8%PDO conversion,2.2 times higher than that of supported Au nanoparticles(1%Au/C).Moreover,carbon encapsulation offers Cu@Cu-N-C with strong leaching resistance for better recycling.
文摘The ZnO molecule plays an important role in the industry due to it special features, anti-corrosion anti-bacterial properties, as well as due to its low electrical conductivity and heat resistance. In these experimental researches, the sol-gel method was chosen, which enables control of nucleation, aging and growth of particles in the solution. ZnO synthesis was prepared utilizing chemical method with Zinc acetate dyhidrate and NaOH with the appropriate methanol solvent and heating (60˚C). The methods used in identification and characterization are FTIR, UV/VIS, OPTICAL MICROSCOPY, SEM and XRD. The FTIR spectra of synthesized ZnO with corresponding ones show characteristic bands at the corresponding wavelengths, which confirm the presence of ZnO nanoparticles. SEM characterization of ZnO shows the morphology of needle-shaped nanoparticles. XRD spectar in this research by chemical method indicates the particle size of 17.76 nm.
文摘Objective:To synthesize zinc oxide nanoparticles(ZnONPs)and evaluate their antibacterial and wound healing effects against wounds infected with methicillin-resistant Staphylococcus aureus(MRSA).Methods:ZnONPs were prepared by sol-gel method and characterized by X-ray diffraction(XRD)analysis and scanning electron microscopy(SEM).A total of 18 rabbits were divided into three groups:the ZnONPs group,the gentamicin group and the control group.A wound of 3 cm^(2) was inflicted on each rabbit and contaminated with MRSA inoculum.Treatment was started from the fourth day post-surgery.Wound healing,microbiological analysis,and histopathological analysis were performed to assess the efficacy of ZnONPs ointment.Results:XRD analysis confirmed the hexagonal wurtzite structure of the ZnONPs with an average crystallite size of 29.23 nm.SEM revealed discoid-shaped ZnONPs with a rough surface and an average size of 48.36 nm.Energy-dispersive X-ray analysis confirmed the purity of ZnONPs.Moreover,the particle size ranged from 100-700 nm with a high agglomeration trend.Treatment with ZnONPs promoted MRSA-infected wound healing.In addition,ZnONPs showed a good antibacterial effect as evidenced by a dose-dependent increase in the zone of inhibition.Conclusions:ZnONPs accelerate the healing of MRSA-infected wounds.Therefore,it can be explored for the treatment of MRSA infection.
文摘Cu doped Mg(OH)_(2) nanoparticles were synthesized with varying concentrations from 0 to 10%by a chemical synthesis technique of coprecipitation.X-rays diffraction (XRD) of the samples confirms that all the samples acquire the hexagonal crystal structure.XRD results indicated the solubility limit of dopant in the host material and the secondary phase of CuO was observed beyond 3%Cu doping in Mg(OH)_(2).The reduction in the size of nanoparticles was observed from 166 to 103 nm for Mg(OH)_(2) and 10% Cu doped Mg(OH)_(2)samples,respectively.The shift in absorption spectra exhibited the systematical enhancement in optical bandgap from 5.25 to 6.085 eV.A good correlation was observed between the bandgap energy and crystallite size of the nanocrystals which confirmed the size induced effect in the nanoparticles.The transformation in the sample morphology was observed from irregular spherical particles to sepals like shapes with increasing the Cu concentration in the host material.The energy dispersive X-Ray (EDX) analysis confirmed the purity of mass percentage composition of the elements present in the samples.
文摘Cu- and Ni-codoped FeZnO particles with the wurzite structure were successfully synthesized at low temperature by a co-precipitation method. The samples were characterized using a vibrating sample magnetometer, X-ray diffraction, energy dispersive X-ray spectroscopy, UV-Vis spectrophotometry and electron spin resonance. The results demonstrated that room temperature ferromagnetic order was observed in both samples and the magnetization was higher than that of Fe-doped ZnO. The correlation between the structural and magnetic properties is discussed.
基金Project(50371024) supported by the National Natural Science Foundation of China
文摘ZnO nanoparticles were synthesized via precipitation-pyrolysis (P&P), where the precursor zinc hydroxide carbonate (Zn5(CO3)2(OH)6) was obtained and then pyrolyzed. The results of TEM indicate that pyrolysis temperature is the predominant factor for controlling mean sizes of nanoparticles, ranging from 8 nm to 80 nm. Increasing the pyrolysis temperature enhances the mean size. The results of XRD show that nanoparticles are all of crystalline zincite. The mean size observed by TEM is in agreement with that calculated from the specific surface area(SSA) and the crystalline size calculated from the XRD patterns, indicating that the primary particles are rather uniform in size and have single crystals. The growth behaviors of epitaxy along the C-axis are responsible for the morphology of ZnO changing from sphere to rod-like shape, and then to reticulation. Compared with other synthesis approaches, P&P can get fairly good product with a relatively low cost.
基金Project supported by the Universiti Teknologi Malaysia(UTM)(Grant No.R.J1300000.7809.4F626)RMC for postdoctoral grants
文摘Zn（1-x）Cux O（x=0.00, 0.01, 0.03, and 0.05） nanoparticles are synthesized via the sol-gel technique using gelatin and nitrate precursors. The impact of copper concentration on the structural, optical, and antibacterial properties of these nanoparticles is demonstrated. Powder x-ray diffraction investigations have illustrated the organized Cu doping into ZnO nanoparticles up to Cu concentration of 5%（x = 0.05）. However, the peak corresponding to CuO for x= 0.01 is not distinguishable. The images of field emission scanning electron microscopy demonstrate the existence of a nearly spherical shape with a size in the range of 30–52 nm. Doping Cu creates the Cu–O–Zn on the surface and results in a decrease in the crystallite size. Photoluminescence and absorption spectra display that doping Cu causes an increment in the energy band gap. The antibacterial activities of the nanoparticles are examined against Escherichia coli（Gram negative bacteria）cultures using optical density at 600 nm and a comparison of the size of inhibition zone diameter. It is found that both pure and doped ZnO nanoparticles indicate appropriate antibacterial activity which rises with Cu doping.
基金Project(CXZZ11-0812)supported by Graduate Students Innovative Projects of Jiangsu Province,ChinaProject(J20122288)supported by Guizhou Provincial Natural Science Foundation of China+1 种基金Project(Y4110235)supported by Zhejiang Provincial Natural Science Foundation of ChinaProject(JKY2011008)supported by Fundamental Research Funds for the Central Universities,China
文摘Amino-functionalized magnetic nanoparticle （NH2-MNP） were prepared by a sol-gel approach. The adsorption behavior of Cu（II） ions on NH2-MNP was discussed systematically by batch experiments. The effects of initial Cu（II） ions concentration, time, pH and temperature were investigated. In kinetic studies, the pseudo-second-order model was successfully employed, and the pseudo-first-order model substantiated that Cu（II） adsorption on NH2-MNP was a diffusion-based process. Langmuir model and Dubinin-Radushkevich model （R2〉0.99） were more corresponded with the adsorption isotherm data of Cu（II） ions than Freundlich model. The adsorption capacity was increased with the increment of temperature and pH. NH2-MNP remains excellent Cu（II） recoveries after reusing five adsorption and desorption cycles, making NH2-MNP a promising candidate for repetitively removing heavy metal ions from environmental water samples. According to the results obtained from adsorption activation energy and thermodynamic studies, it can be inferred that the main adsorption mechanism between absorbent and Cu（II） ions is ion exchange-surface complexation.
基金Projects(41172110,61107090)supported by the National Natural Science Foundation of China
文摘Cu2O@Cu2O core-shell nanoparticles (NPs) were prepared by using solution phase strategy. It was found that Cu2O@Cu2O NPs were easily converted to Cu2O@Cu NPs with the help of polyvinylpyrrolidine (PVP) and excessive ascorbic acid (AA) in air at room temperature, which was an interesting phenomenon. The features of the two kinds of NPs were characterized by XRD, TEM and extinction spectra. Cu2O@Cu NPs with different shell thicknesses showed wide tunable optical properties for the localized surface plasmon (LSP) in metallic Cu. But Cu2O@Cu2O NPs did not indicate this feature. FTIR results reveal that Cu+ ions on the surface of Cu2O shell coordinate with N and O atoms in PVP and are further reduced to metallic Cu by excessive AA and then form a nucleation site on the surface of Cu2O nanocrystalline. PVP binds onto different sites to proceed with the reduction utill all the Cu sources in Cu2O shell are completely assumed.
文摘Cu nanoparticles were prepared by reducing Cu2＋ ions with ascorbic acid through aqueous solution reduction method. The effects of solution pH and average size of Cu2O particles on the preparation of Cu nanoparticles were investigated. Cu particles were prepared at pH 3, 5 or 7, with the smallest Cu particles obtained at pH 7. However, Cu particles could not be prepared at pH 9 or 11. The average size of Cu2O particles can affect that of Cu particles. Larger Cu2O particles result in larger Cu particles. In addition, experiments were conducted to explore the reaction process by measuring the X-ray diffraction （XRD） patterns of specimens collected at different time points during the reaction. It was found that Cu（OH）2 was initially formed as a precursor, followed by the formation of Cu2O, which was finally reduced to Cu particles.
文摘The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.
