The structure of bcc-Fe80Cu20 solid solution produced by mechanical alloying of the elemental bcc-Fe and fcc-Cu powders has been studied using X-ray diffraction and the extended X-ray absorption fine structure (EXAFS)...The structure of bcc-Fe80Cu20 solid solution produced by mechanical alloying of the elemental bcc-Fe and fcc-Cu powders has been studied using X-ray diffraction and the extended X-ray absorption fine structure (EXAFS) techniques. The disappearance of elemental Fe and Cu X-ray diffraction (XRD) peaks and the presence of bcc structural XRD peaks illustrate the formation of a nanocrystalline single-phase bcc-Fe80Cu20 solid solution. From the EXAFS result, the clear observation of Cu atoms taking on bcc coordination in the solid solution and Fe atoms remaining bcc structure further verifies the reality of atomic alloying between Fe and Cu atoms and the lattice change of Cu from fcc to bcc. However, the supersaturated bcc solid solution is not chemically uniform, i.e., some regions are rich in Fe atoms and other regions rich in Cu atoms.展开更多
The Ce_xTh_(1-x)O_2 solid solutions were prepared by citrate sol-gel method,and their structure and reduction properties were studied. XRD shows that solid solution with cubicphase formed in all the solid solutions (x...The Ce_xTh_(1-x)O_2 solid solutions were prepared by citrate sol-gel method,and their structure and reduction properties were studied. XRD shows that solid solution with cubicphase formed in all the solid solutions (x = 0.2, 0.5, 0.8) Ce_xTh_(1-x)O_2. Raman spectrum showsthat Ce-Th complex oxides can promote the formation of oxygen vacancies. Two reduction peaks appearin the TPR profiles of Ce_xTh_(1-x)O_2 solid solution. The a peak is attributed to the reduction ofCe^(4+) on the surface, and the β peak is attributed to the reduction of bulk CeO_2. Theincorporation of Th atom into CeO_2 improves the reduction of CeO_2. Ce_xTh_(1-x)O_2 mixed oxidesare promising materials for oxygen vacancies produced, as well as catalysts for many reactionsinvolved oxygen, such as the catalysts for three-way reactions for reducing the releasing pollutantsor combustion of VOCs.展开更多
By X-ray powder diffraction technique and oxygen content analysis, a solid solution Sm1+xBa2-xCu3Oy has been determined in the range 0≤x≤0.4. When x<0.25. the Sm1+xBa2-xCu3Oy presents orthorhombic symmetry, and ...By X-ray powder diffraction technique and oxygen content analysis, a solid solution Sm1+xBa2-xCu3Oy has been determined in the range 0≤x≤0.4. When x<0.25. the Sm1+xBa2-xCu3Oy presents orthorhombic symmetry, and the orthorhombic-tetragonaJ transition ocCurs at x = 0.25. With the increase of x, TC decreases and finally breaks. The correlation between ox ygen content and phase structure at different quench temperatures related to Sm Ba2Cu3Oy has been investigated as well展开更多
Samples of Ag<sub>8</sub>Ge<sub>1-x</sub>Mn<sub>x</sub>Te<sub>6</sub> solid solutions with different manganese content (x = 0, 0.05, 0.1, 0.2) were prepared by fusing an...Samples of Ag<sub>8</sub>Ge<sub>1-x</sub>Mn<sub>x</sub>Te<sub>6</sub> solid solutions with different manganese content (x = 0, 0.05, 0.1, 0.2) were prepared by fusing and further pressing their powders under the pressure of 0.6 GPa. In addition of Mn atoms to the Ag<sub>8</sub>GeTe<sub>6</sub> compound leads to compression of their lattice. All p-type samples acquire a high resistance below the transition at temperatures of 180 - 220 K. The electrical conductivity of all compositions in the range of 220 - 300 K increases due to hopping mechanism, and at temperatures T > 320 K, a semiconductor characteristic is observed. By studying impedance spectra of samples, it was established that at 80 K solid solutions behave like a homogeneous dielectric material. At high temperatures and frequencies of an external electric field, a significant role of grain boundaries in conductivity was revealed. The dielectric anomaly occurring at low frequencies is also associated with an effect that manifests itself in the grain boundary.展开更多
Nanosized Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions（x = 0.00-0.20） were synthesized by means of hydrothermal method.Then the solid solutions were ball milled with Mg2Ni and Ni powders for 20 h to get the...Nanosized Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions（x = 0.00-0.20） were synthesized by means of hydrothermal method.Then the solid solutions were ball milled with Mg2Ni and Ni powders for 20 h to get the Mg2Ni–Ni–5 mol% Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） composites.The structures and spectrum characteristics of the Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions catalysts were analyzed systemically.XRD results showed that the doped samples exhibited single phase of CeO2 fluorite structure.The cell parameters and cell volumes were increased with increasing the doped content.Raman spectrum revealed that the peak position of F^2g mode shift to higher wavenumbers and the peak corresponding to oxygen vacancies were observed distinctly for the doped samples.UV-Vis technique indicated that the absorption peaks of Eu^3＋ and Nd^3＋ ions appeared; the bandgap energy was decreased linearly.The electrochemical and kinetic properties of the Mg2Ni–Ni–5 mol% Ce1-x（Nd0.5Eu0.5xO2-δ composites were measured.The maximum discharge capacity was increased from 722.3 mA h/g for x = 0.00 to 819.7 mA h/g for x = 0.16,and the cycle stability S20 increased from 25.0%（x = 0.00） to 42.2%（x = 0.20）.The kinetic measurement proved that the catalytic activity of composite surfaces and the hydrogen diffusion rate were improved for the composites with doped catalysts,especially for the composites with x = 0.16 and x = 0.20.The catalysis mechanism was analyzed from the point of microstructure and spectrum features of the Ce1-x（Nd0.5Eu0.5）xO2-δ solid solutions.展开更多
Ce Zr O solid solution was prepared by four different methods, i.e., decomposition of nitrate, coprecipiation, hydroxysuainic acid sol gel as well as citrate sol gel, and characterized by using X ray powder diffr...Ce Zr O solid solution was prepared by four different methods, i.e., decomposition of nitrate, coprecipiation, hydroxysuainic acid sol gel as well as citrate sol gel, and characterized by using X ray powder diffraction, Raman and temperature programmed reduction. The phase composition and the reduction properties of Ce Zr O depend on the preparation method. A cubic Ce 0.5 Zr 0.5 O 2 solid solution can be obtained by using the sol gel method. The Ce Zr O solid solution prepared by using decomposition or coprecipiation was composed of cubic Ce 0.8 Zr 0.2 O 2 and tetragonal Ce 0.2 Zr 0.8 O 2 solid solution. The Ce Zr O solid solution prepared with different methods shows the different reduction properties owing to different phase composition. Results of differential thermal analysis and XRD show that Ce 0.5 Zr 0.5 O 2 solid solution is formed during the decomposition or combustion of the gel.展开更多
基金Natural Science Foundation of Guangdong Province (Grant No. 20010056).
文摘The structure of bcc-Fe80Cu20 solid solution produced by mechanical alloying of the elemental bcc-Fe and fcc-Cu powders has been studied using X-ray diffraction and the extended X-ray absorption fine structure (EXAFS) techniques. The disappearance of elemental Fe and Cu X-ray diffraction (XRD) peaks and the presence of bcc structural XRD peaks illustrate the formation of a nanocrystalline single-phase bcc-Fe80Cu20 solid solution. From the EXAFS result, the clear observation of Cu atoms taking on bcc coordination in the solid solution and Fe atoms remaining bcc structure further verifies the reality of atomic alloying between Fe and Cu atoms and the lattice change of Cu from fcc to bcc. However, the supersaturated bcc solid solution is not chemically uniform, i.e., some regions are rich in Fe atoms and other regions rich in Cu atoms.
文摘The Ce_xTh_(1-x)O_2 solid solutions were prepared by citrate sol-gel method,and their structure and reduction properties were studied. XRD shows that solid solution with cubicphase formed in all the solid solutions (x = 0.2, 0.5, 0.8) Ce_xTh_(1-x)O_2. Raman spectrum showsthat Ce-Th complex oxides can promote the formation of oxygen vacancies. Two reduction peaks appearin the TPR profiles of Ce_xTh_(1-x)O_2 solid solution. The a peak is attributed to the reduction ofCe^(4+) on the surface, and the β peak is attributed to the reduction of bulk CeO_2. Theincorporation of Th atom into CeO_2 improves the reduction of CeO_2. Ce_xTh_(1-x)O_2 mixed oxidesare promising materials for oxygen vacancies produced, as well as catalysts for many reactionsinvolved oxygen, such as the catalysts for three-way reactions for reducing the releasing pollutantsor combustion of VOCs.
文摘By X-ray powder diffraction technique and oxygen content analysis, a solid solution Sm1+xBa2-xCu3Oy has been determined in the range 0≤x≤0.4. When x<0.25. the Sm1+xBa2-xCu3Oy presents orthorhombic symmetry, and the orthorhombic-tetragonaJ transition ocCurs at x = 0.25. With the increase of x, TC decreases and finally breaks. The correlation between ox ygen content and phase structure at different quench temperatures related to Sm Ba2Cu3Oy has been investigated as well
文摘Samples of Ag<sub>8</sub>Ge<sub>1-x</sub>Mn<sub>x</sub>Te<sub>6</sub> solid solutions with different manganese content (x = 0, 0.05, 0.1, 0.2) were prepared by fusing and further pressing their powders under the pressure of 0.6 GPa. In addition of Mn atoms to the Ag<sub>8</sub>GeTe<sub>6</sub> compound leads to compression of their lattice. All p-type samples acquire a high resistance below the transition at temperatures of 180 - 220 K. The electrical conductivity of all compositions in the range of 220 - 300 K increases due to hopping mechanism, and at temperatures T > 320 K, a semiconductor characteristic is observed. By studying impedance spectra of samples, it was established that at 80 K solid solutions behave like a homogeneous dielectric material. At high temperatures and frequencies of an external electric field, a significant role of grain boundaries in conductivity was revealed. The dielectric anomaly occurring at low frequencies is also associated with an effect that manifests itself in the grain boundary.
基金supported by the National Natural Science Foundations of China(51501095,51371094)the Natural Science Foundation of Inner Mongolia(2017MS(LH)0516)
文摘Nanosized Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions（x = 0.00-0.20） were synthesized by means of hydrothermal method.Then the solid solutions were ball milled with Mg2Ni and Ni powders for 20 h to get the Mg2Ni–Ni–5 mol% Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） composites.The structures and spectrum characteristics of the Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions catalysts were analyzed systemically.XRD results showed that the doped samples exhibited single phase of CeO2 fluorite structure.The cell parameters and cell volumes were increased with increasing the doped content.Raman spectrum revealed that the peak position of F^2g mode shift to higher wavenumbers and the peak corresponding to oxygen vacancies were observed distinctly for the doped samples.UV-Vis technique indicated that the absorption peaks of Eu^3＋ and Nd^3＋ ions appeared; the bandgap energy was decreased linearly.The electrochemical and kinetic properties of the Mg2Ni–Ni–5 mol% Ce1-x（Nd0.5Eu0.5xO2-δ composites were measured.The maximum discharge capacity was increased from 722.3 mA h/g for x = 0.00 to 819.7 mA h/g for x = 0.16,and the cycle stability S20 increased from 25.0%（x = 0.00） to 42.2%（x = 0.20）.The kinetic measurement proved that the catalytic activity of composite surfaces and the hydrogen diffusion rate were improved for the composites with doped catalysts,especially for the composites with x = 0.16 and x = 0.20.The catalysis mechanism was analyzed from the point of microstructure and spectrum features of the Ce1-x（Nd0.5Eu0.5）xO2-δ solid solutions.
文摘Ce Zr O solid solution was prepared by four different methods, i.e., decomposition of nitrate, coprecipiation, hydroxysuainic acid sol gel as well as citrate sol gel, and characterized by using X ray powder diffraction, Raman and temperature programmed reduction. The phase composition and the reduction properties of Ce Zr O depend on the preparation method. A cubic Ce 0.5 Zr 0.5 O 2 solid solution can be obtained by using the sol gel method. The Ce Zr O solid solution prepared by using decomposition or coprecipiation was composed of cubic Ce 0.8 Zr 0.2 O 2 and tetragonal Ce 0.2 Zr 0.8 O 2 solid solution. The Ce Zr O solid solution prepared with different methods shows the different reduction properties owing to different phase composition. Results of differential thermal analysis and XRD show that Ce 0.5 Zr 0.5 O 2 solid solution is formed during the decomposition or combustion of the gel.
