The spontaaleous infiltration aald wetting behaviors of a Zr-based alloy melt on porous a SiC ceramic plate were studied using tile sessile drop metilod by continuous heating and holding for 1800 s at different temper...The spontaaleous infiltration aald wetting behaviors of a Zr-based alloy melt on porous a SiC ceramic plate were studied using tile sessile drop metilod by continuous heating and holding for 1800 s at different temperatures in a high-vacuum furnace. The results showed that tile Zr-based alloy melt could pastly infiltrate tile porous SiC substrate without pressure due to tile effect of capillary pressure. Wettability and infiltration rates increased witil increasing temperature, and interracial reaction products （ZrC0.7 and TiC） were detected in tile Zr-based alloy/SiC ceramic system, likely because of tile reaction of tile active elements Zr and Ti witil elemental C. Furtilelinore, tile redundant ele- ment Si diffused into tile alloy melt.展开更多
This paper reviews the development of current research in bulk glassy alloys by focusing on the trigger point for the synthesis of the first bulk glassy alloys by the conventional mold casting method. This review cove...This paper reviews the development of current research in bulk glassy alloys by focusing on the trigger point for the synthesis of the first bulk glassy alloys by the conventional mold casting method. This review covers the background, discovery, characteristics, and applications of bulk glassy alloys, as well as recent topics regarding them. Applications of bulk glassy alloys have been expanding, particularly for Fe-based bulk glassy alloys, due to their unique properties, high glass-forming ability, and low cost. In the near future, the engineering importance of bulk glassy alloys is expected to increase steadily, and continuous interest in these novel metallic materials for basic science research is anticipated.展开更多
The effect of niobium on glass-formation ability and soft magnetic properties were studied in Fe-Gd-B glassy alloys. The glassy alloys exhibited high glass-formation ability when the element of Nb was added. Bulk glas...The effect of niobium on glass-formation ability and soft magnetic properties were studied in Fe-Gd-B glassy alloys. The glassy alloys exhibited high glass-formation ability when the element of Nb was added. Bulk glassy rod （Fe0.87Co0.13）68.5Gd3.5Nb3B25 with a diameter up to 3 mm was produced by copper mold casting. The size of the atom might play an important role in increasing glass-formation ability. The coercive force of glassy （Fe0.87Co0.13）71.5.xGd3.sNbxB25 （x=1.2, 1.5, 2, 2.5, 3, 4） alloys decreased after the addition of niobium element and was in the range of 1.5-2.9 A/m. The permeability spectrum of （Fe0.87Co0.13）70.3Gd3.5Nb1.5B25 glassy ribbon showed that the relaxation frequency （f0） was 6.1 MHz.展开更多
The effect of repeated melting of the mother ingot on the thermal stabilityof a Zr_(60)Al_+(15)Ni_(25) glassy alloy was investigated by differential scanning calorimetry(DSC). Experimental results indicate that after ...The effect of repeated melting of the mother ingot on the thermal stabilityof a Zr_(60)Al_+(15)Ni_(25) glassy alloy was investigated by differential scanning calorimetry(DSC). Experimental results indicate that after the repeated melting of the ingots at 1300 and 1580K, the glass transition temperature T_g increases from 686.4 to 690.7 and 696.8 K and the onsettemperature of crystallization T_x from 757.9 to 758.6 and 763.4 K, respectively, indicating thatthe thermal stability becomes higher after the repeated arc melting of the mother ingot and that itis more effective at higher temperature. Within the framework of structure heredity, the origin ofthe improvement of the thermal stability of Zr_(60)Al_+(15)Ni_(25) bulk glassy alloy is discussed.展开更多
The work functions before and after crystallization of two glassy alloys,Pd_(83.5)Si_(16.5) and Cu_(70)Ti_(30) have been measured by means of the con- tact potential difference method in the secondary electron field a...The work functions before and after crystallization of two glassy alloys,Pd_(83.5)Si_(16.5) and Cu_(70)Ti_(30) have been measured by means of the con- tact potential difference method in the secondary electron field at room temperature under 10^(-5) Pa vacuum.The results show that the work functions of both glassy alloys are higher than those of the corresponding crystalline alloys.展开更多
Zr50Al15Ni10Cu25 amorphous powder was synthesized by mechanical alloying. The effect of Si3N4 addition on the crystallization behavior of the alloy during sintering process was studied. Thermal stability of the powder...Zr50Al15Ni10Cu25 amorphous powder was synthesized by mechanical alloying. The effect of Si3N4 addition on the crystallization behavior of the alloy during sintering process was studied. Thermal stability of the powders was performed by differential scanning calorimetry （DSC）. The phase and microstructure of the powders and bulk specimens sintered were determined by X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. The results show that, introducing 0.05% （mass fraction） Si3N4 can enhance the crystallization activation energy of the ZZr50Al15Ni10Cu25 amorphous powders, which indicates that Si3N4 addition has hindrance effect on forming crystals from Zr50Al15Ni10Cu25amorphous powder. However, 0.10% Si3N4 results in the decrease of the crystallization activation energy, which makes its crystallization process easy to occur.展开更多
Bulk Zr55Al10Ni5Cu30 metallic glass plates with a dimension of 85 mm×35mm×4 mm and a complicated plate were fabricated by injecting casting method using spongy zirconium and industrial purity aluminum, nicke...Bulk Zr55Al10Ni5Cu30 metallic glass plates with a dimension of 85 mm×35mm×4 mm and a complicated plate were fabricated by injecting casting method using spongy zirconium and industrial purity aluminum, nickel and copper as raw materials. It was shown that the holding time of liquid metals at elevated temperatures had a great influence on the oxygen content of the plates due to the contamination resulting from the atmosphere. Increasing holding time resulted in the increase of oxygen content in the injected alloy. The glass transition temperatures of the bulk metallic glass plates are higher than that reported in the literature and crystallization temperature is lower for the one with higher oxygen content at the same heating rate. The extension of the undercooled liquid region △Tx reaching about 87 K is 3 K higher than that previously reported and 26 K higher than that with oxygen content of 0.076 wt pct for the one with oxygen content as high as 0.065 wt pct. Therefore the oxygen content of the alloy has a significant influence on the glass forming ability and thermal stability of bulk metal glass. It is suggested that direct correlation between high glass forming ability and large △Tx is only valid for a well-defined low oxygen concentration or has to be reconsidered by incorporating oxygen as an additional alloying element.展开更多
The non-isothermal and isothermal crystallization kinetics of Zr_（72.5）Al_（10）Fe_（17.5） glassy alloy was investigated using differential scanning calorimeter（DSC）.Under non-isothermal heating condition,the pri...The non-isothermal and isothermal crystallization kinetics of Zr_（72.5）Al_（10）Fe_（17.5） glassy alloy was investigated using differential scanning calorimeter（DSC）.Under non-isothermal heating condition,the primary phase in the initial crystallization is Zr_6Al_2Fe phase and the final crystallized products consist of Zr_6Al_2Fe,Zr_2Fe and a-Zr phases.The apparent activation energy for crystallization estimated using the Kissinger method is 342.1 ±8.1 kJ/mol.The local activation energy decreased with the increase in the crystallization volume fraction during nonisothermal crystallization.Under isothermal heating condition,the average Avrami exponent of about 2.76 implies a mainly diffusion-controlled three-dimensional growth with an increasing nucleation rate.The local activation energy for isothermal crystallization shows a different variation trend from that for nonisothermal crystallization,indicating different nucleation-and-growth mechanisms for the two crystallizaiton conditions.展开更多
The bulk glassy Cu 60 Zr 30 Ti 10 alloy with a diameter up to 4 mm and a length of 70 mm containing nanocrystalline phase was successfully developed by using copper mold casting method. The temperature interval of the...The bulk glassy Cu 60 Zr 30 Ti 10 alloy with a diameter up to 4 mm and a length of 70 mm containing nanocrystalline phase was successfully developed by using copper mold casting method. The temperature interval of the supercooled liquid region before crystallization is above 37 K. The glass transition temperature ( T g) and the reduced glass transition temperature ( T g/ T l) of the cast bulk glassy Cu 60 Zr 30 Ti 10 alloy are 713 K and 0.62. The cast bulk glassy alloy, which has high glassy forming ability, shows expected mechanical properties. The elastic modulus, yield strength, fracture strength and elongation including elastic elongation are 114 GPa, 1 785 MPa, 2 150 MPa and 3.3% respectively in compressive deformation, and 112 GPa, 1 780 MPa, 2 000 MPa and 1.9% respectively in tensile deformation. High resolution transmission electron microscope (HRTEM) and nano beam electron diffraction (NBED) studies indicate that the cast metallic bulk glassy Cu 60 Zr 30 Ti 10 alloy consists of nanocrystals with a size of 4 nm embedded in glassy matrix. The nanoparticle is identified as CuZr and has point space group symmetry of pm3m and its lattice parameter is a =0.3 262 nm . The nanocrystalline phase grew up to 10 nm upon annealing at 430 ℃ for 10 min and caused the alloy brittle.展开更多
基金the financial support from the National Natural Science Foundation of China(No.51401131)the China's Manned Space Station Project(No.TGJZ800–2–RW024)
文摘The spontaaleous infiltration aald wetting behaviors of a Zr-based alloy melt on porous a SiC ceramic plate were studied using tile sessile drop metilod by continuous heating and holding for 1800 s at different temperatures in a high-vacuum furnace. The results showed that tile Zr-based alloy melt could pastly infiltrate tile porous SiC substrate without pressure due to tile effect of capillary pressure. Wettability and infiltration rates increased witil increasing temperature, and interracial reaction products （ZrC0.7 and TiC） were detected in tile Zr-based alloy/SiC ceramic system, likely because of tile reaction of tile active elements Zr and Ti witil elemental C. Furtilelinore, tile redundant ele- ment Si diffused into tile alloy melt.
基金supported by Guangdong Innovative Research Team Program (2009010005)
文摘This paper reviews the development of current research in bulk glassy alloys by focusing on the trigger point for the synthesis of the first bulk glassy alloys by the conventional mold casting method. This review covers the background, discovery, characteristics, and applications of bulk glassy alloys, as well as recent topics regarding them. Applications of bulk glassy alloys have been expanding, particularly for Fe-based bulk glassy alloys, due to their unique properties, high glass-forming ability, and low cost. In the near future, the engineering importance of bulk glassy alloys is expected to increase steadily, and continuous interest in these novel metallic materials for basic science research is anticipated.
基金Project supported by the National Natural Science Foundation of China (50471094)
文摘The effect of niobium on glass-formation ability and soft magnetic properties were studied in Fe-Gd-B glassy alloys. The glassy alloys exhibited high glass-formation ability when the element of Nb was added. Bulk glassy rod （Fe0.87Co0.13）68.5Gd3.5Nb3B25 with a diameter up to 3 mm was produced by copper mold casting. The size of the atom might play an important role in increasing glass-formation ability. The coercive force of glassy （Fe0.87Co0.13）71.5.xGd3.sNbxB25 （x=1.2, 1.5, 2, 2.5, 3, 4） alloys decreased after the addition of niobium element and was in the range of 1.5-2.9 A/m. The permeability spectrum of （Fe0.87Co0.13）70.3Gd3.5Nb1.5B25 glassy ribbon showed that the relaxation frequency （f0） was 6.1 MHz.
基金This work was financially supported by the National Natural Science Foundation of China (No. 50071032)
文摘The effect of repeated melting of the mother ingot on the thermal stabilityof a Zr_(60)Al_+(15)Ni_(25) glassy alloy was investigated by differential scanning calorimetry(DSC). Experimental results indicate that after the repeated melting of the ingots at 1300 and 1580K, the glass transition temperature T_g increases from 686.4 to 690.7 and 696.8 K and the onsettemperature of crystallization T_x from 757.9 to 758.6 and 763.4 K, respectively, indicating thatthe thermal stability becomes higher after the repeated arc melting of the mother ingot and that itis more effective at higher temperature. Within the framework of structure heredity, the origin ofthe improvement of the thermal stability of Zr_(60)Al_+(15)Ni_(25) bulk glassy alloy is discussed.
文摘The work functions before and after crystallization of two glassy alloys,Pd_(83.5)Si_(16.5) and Cu_(70)Ti_(30) have been measured by means of the con- tact potential difference method in the secondary electron field at room temperature under 10^(-5) Pa vacuum.The results show that the work functions of both glassy alloys are higher than those of the corresponding crystalline alloys.
基金Project(50672134) supported by the National Natural Science Foundation of China
文摘Zr50Al15Ni10Cu25 amorphous powder was synthesized by mechanical alloying. The effect of Si3N4 addition on the crystallization behavior of the alloy during sintering process was studied. Thermal stability of the powders was performed by differential scanning calorimetry （DSC）. The phase and microstructure of the powders and bulk specimens sintered were determined by X-ray diffractometry （XRD） and scanning electron microscopy （SEM）. The results show that, introducing 0.05% （mass fraction） Si3N4 can enhance the crystallization activation energy of the ZZr50Al15Ni10Cu25 amorphous powders, which indicates that Si3N4 addition has hindrance effect on forming crystals from Zr50Al15Ni10Cu25amorphous powder. However, 0.10% Si3N4 results in the decrease of the crystallization activation energy, which makes its crystallization process easy to occur.
文摘Bulk Zr55Al10Ni5Cu30 metallic glass plates with a dimension of 85 mm×35mm×4 mm and a complicated plate were fabricated by injecting casting method using spongy zirconium and industrial purity aluminum, nickel and copper as raw materials. It was shown that the holding time of liquid metals at elevated temperatures had a great influence on the oxygen content of the plates due to the contamination resulting from the atmosphere. Increasing holding time resulted in the increase of oxygen content in the injected alloy. The glass transition temperatures of the bulk metallic glass plates are higher than that reported in the literature and crystallization temperature is lower for the one with higher oxygen content at the same heating rate. The extension of the undercooled liquid region △Tx reaching about 87 K is 3 K higher than that previously reported and 26 K higher than that with oxygen content of 0.076 wt pct for the one with oxygen content as high as 0.065 wt pct. Therefore the oxygen content of the alloy has a significant influence on the glass forming ability and thermal stability of bulk metal glass. It is suggested that direct correlation between high glass forming ability and large △Tx is only valid for a well-defined low oxygen concentration or has to be reconsidered by incorporating oxygen as an additional alloying element.
基金Funded by the National Natural Science Foundation of China(No.51401053)the China Postdoctoral Science Foundation(No.2015T80676)+1 种基金the Natural Science Foundation of Fujian Province(No.2014J05053)the Postdoctoral Scientific Research Foundation of Fuzhou University(No.0180-601017)
文摘The non-isothermal and isothermal crystallization kinetics of Zr_（72.5）Al_（10）Fe_（17.5） glassy alloy was investigated using differential scanning calorimeter（DSC）.Under non-isothermal heating condition,the primary phase in the initial crystallization is Zr_6Al_2Fe phase and the final crystallized products consist of Zr_6Al_2Fe,Zr_2Fe and a-Zr phases.The apparent activation energy for crystallization estimated using the Kissinger method is 342.1 ±8.1 kJ/mol.The local activation energy decreased with the increase in the crystallization volume fraction during nonisothermal crystallization.Under isothermal heating condition,the average Avrami exponent of about 2.76 implies a mainly diffusion-controlled three-dimensional growth with an increasing nucleation rate.The local activation energy for isothermal crystallization shows a different variation trend from that for nonisothermal crystallization,indicating different nucleation-and-growth mechanisms for the two crystallizaiton conditions.
文摘The bulk glassy Cu 60 Zr 30 Ti 10 alloy with a diameter up to 4 mm and a length of 70 mm containing nanocrystalline phase was successfully developed by using copper mold casting method. The temperature interval of the supercooled liquid region before crystallization is above 37 K. The glass transition temperature ( T g) and the reduced glass transition temperature ( T g/ T l) of the cast bulk glassy Cu 60 Zr 30 Ti 10 alloy are 713 K and 0.62. The cast bulk glassy alloy, which has high glassy forming ability, shows expected mechanical properties. The elastic modulus, yield strength, fracture strength and elongation including elastic elongation are 114 GPa, 1 785 MPa, 2 150 MPa and 3.3% respectively in compressive deformation, and 112 GPa, 1 780 MPa, 2 000 MPa and 1.9% respectively in tensile deformation. High resolution transmission electron microscope (HRTEM) and nano beam electron diffraction (NBED) studies indicate that the cast metallic bulk glassy Cu 60 Zr 30 Ti 10 alloy consists of nanocrystals with a size of 4 nm embedded in glassy matrix. The nanoparticle is identified as CuZr and has point space group symmetry of pm3m and its lattice parameter is a =0.3 262 nm . The nanocrystalline phase grew up to 10 nm upon annealing at 430 ℃ for 10 min and caused the alloy brittle.
