The elastocalorie effect of PbTiO3 thin films with 180° domain structure is studied using the phase field method. The influence of external stress σ33, misfit strain μm and domain wall energy on the adiabatic t...The elastocalorie effect of PbTiO3 thin films with 180° domain structure is studied using the phase field method. The influence of external stress σ33, misfit strain μm and domain wall energy on the adiabatic temperature change （ △ Tσ） at room temperature are carried out. The calculation results indicate that ｜△Tσ｜ increases as ｜σ33｜ or ｜μm｜ increases. The largest △ Tσ wlue of--7.81（ is obtained at σ33 = 2 GPa and Um =-0.02. Furthermore, the domain switching behaviors under different gradient coeffcients are different, and finally affect the elastocaloric effect in PTO thin films. These results could provide a guide to choose the substrate and the preparation process in experiments.展开更多
The transmittance technique with a phase object（T-PO）,for measuring optical nonlinear coefficients is proposed with a top-hat beam.The sensitivity of the T-PO with a top-hat beam is a factor of 4 greater than that w...The transmittance technique with a phase object（T-PO）,for measuring optical nonlinear coefficients is proposed with a top-hat beam.The sensitivity of the T-PO with a top-hat beam is a factor of 4 greater than that with a Gaussian beam.The validity of this method is verified by measuring the nonlinearity of a well-characterized liquid,CS 2 at 532-nm wavelength.The ease of use of this method has been proved by measuring a new compound 4-（N-methyl,N-hydroxyethyl）amino,4＇-nitroazobenzene（ANAB） at 600-nm wavelength,indicating that this method can be extended to the measurement of optical nonlinearities in a wide-band spectrum.展开更多
Ultrasound imaging is the most widely used noninvasive medical imaging modality. Its latest elite concept is Superharmonic Imaging which is the most talked-about future of medical diagnostic ultrasound. In this paper,...Ultrasound imaging is the most widely used noninvasive medical imaging modality. Its latest elite concept is Superharmonic Imaging which is the most talked-about future of medical diagnostic ultrasound. In this paper, the computational and analytical study for superharmonic field generation from phased array transducer of 16 × 16 elements is presented. For this, the model preferred, includes the calculation for diffraction effect in frequency domain and nonlinear effect in time domain. The attenuation is included along with the diffraction in frequency domain as well. The comparative analysis of superharmonic field is also carried out with simulated fundamental and second harmonic fields by the same model. Similarly, the comparison with the results from the literature is also reported.展开更多
The aim of this work is evaluate the intergranular corrosion on UNS S31803 steel, with heat treatments at 800 ℃, varying treatment times of 30 mins, 360 mins and 1,440 mins. The results confirm the formation of o pha...The aim of this work is evaluate the intergranular corrosion on UNS S31803 steel, with heat treatments at 800 ℃, varying treatment times of 30 mins, 360 mins and 1,440 mins. The results confirm the formation of o phases and secondary austenite （γ2）. For the analysis of the influence of o and γ2 phases, metallographic analysis were conducted through optical microscopy, potentiokinetic reactivation electrochemical techniques and potentiodynamic polarization in NaCI 3.5% solution. Microstructural analysis has shown a formation of γ2 and o phase in heat treatment, due to diffusion of chromium and molybdenum from δ phase to y phase, precipitating on δ/γ and δ/δ interfaces. The DL-EPR （Double loop electrochemical potentiokinetic reactivation） results have shown an increase of the DOS （degree of sensitization） for long periods of time on heat treatment. The results of potentiodynamic polarization showed a reduction of the corrosion and pitting potentials, followed by an increase of the current density when the UNS S31830 steel is heat treated during long periods of time.展开更多
SAF2507 plates （ 12 mm thickness ） were welded using shield metal arc welding （SMAW） process with E2594 electrode. The microstructure, o-phase, and impact fraetograph of the welded joints were analyzed using optic...SAF2507 plates （ 12 mm thickness ） were welded using shield metal arc welding （SMAW） process with E2594 electrode. The microstructure, o-phase, and impact fraetograph of the welded joints were analyzed using optical microscope and scanning electron mieroseope. The results show that the fusion zone consists of ferrite, chromium nitride, and secondary aastenite precipitation when welding is performed at low heat input （0. 5 kJ/mm）. However, the increase in heat input causes precipitation of brittle o＂ phase at the y/c~ interface in weld metal and heat-affected zone, as well as a brittle fracture along the grain boundary. Heat input in the range of O. 5 kJ/mm to 1.5 kJ/mm is suitable for joining SAF2507 plates.展开更多
A room temperature ionic liquid crystal, 1-dodecyl-3-ethylimidazolium iodide （C12EImI）, and an ionic liquid, 1-decyl-3- ethylimidazolium iodide （Cl0EImI）, have been synthesized, characterized and employed as the e...A room temperature ionic liquid crystal, 1-dodecyl-3-ethylimidazolium iodide （C12EImI）, and an ionic liquid, 1-decyl-3- ethylimidazolium iodide （Cl0EImI）, have been synthesized, characterized and employed as the electrolyte for dye-sensitized solar cells （DSSC）. The physicochemical properties show that a smectic A （SmA） phase with a lamellar structure is formed in CIzEImI. Both C^2EImI and Cl0EImI have good electrochemical and thermal stability facilitating their use in DSSC. The steady-state voltammograms reveal that the diffusion coefficient of I3- in C^2EImI is larger than that in CmEImI, which is at- tributed to the existence of the SmA phase in Ca2EImI. Because the iodide species are located between the layers of imidazo- lium cations in CjzEImI, exchange reaction-based diffusion is increased with a consequent increase in, the overall diffusion. The electrochemical impedance spectrum reveals that charge recombination at the dyed TiOJelectrolyte interface of a C12EImI-based DSSC is reduced due to the increase in I3- diffusion, resulting in higher open-circuit voltage. Moreover, both short-circuit current density and fill factor of the Cl2EImI based DSSC increase, as a result of the increasing transport of I3 in C^2EImI. Consequently, the photoelectric conversion efficiency of C^2EImI-based DSSC is higher than that of the Cl0EImI-based DSSC.展开更多
Aromatic amphiphilic molecules（1） consisting of three biphenyl groups linked together with ether bonds as a rigid rod segment and poly（ethylene oxide） with the number of repeating units of 17 as a coil segment wer...Aromatic amphiphilic molecules（1） consisting of three biphenyl groups linked together with ether bonds as a rigid rod segment and poly（ethylene oxide） with the number of repeating units of 17 as a coil segment were synthesized, and their self-assembly behavior in the bulk state and aqueous solution was investigated. In bulk, molecules 1 self-assembled into 1-D lamellar structure in the solid state or smectic A phase in the liquid crystalline phase via the cooperative effects of ？-？ stacking, micro-phase separation and hydrogen bond interactions. In dilute aqueous solutions, molecules 1 were observed to selfassemble into cylindrical micelles owned uniform diameter and length of hundreds of nanometers.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 11502078 and 11402222the General Project of Hunan Provincial Department of Education under Grant No 15C0535the Start-up Foundation of High-talent Research Project of Hunan University of Science and Technology under Grant No E51517
文摘The elastocalorie effect of PbTiO3 thin films with 180° domain structure is studied using the phase field method. The influence of external stress σ33, misfit strain μm and domain wall energy on the adiabatic temperature change （ △ Tσ） at room temperature are carried out. The calculation results indicate that ｜△Tσ｜ increases as ｜σ33｜ or ｜μm｜ increases. The largest △ Tσ wlue of--7.81（ is obtained at σ33 = 2 GPa and Um =-0.02. Furthermore, the domain switching behaviors under different gradient coeffcients are different, and finally affect the elastocaloric effect in PTO thin films. These results could provide a guide to choose the substrate and the preparation process in experiments.
文摘The transmittance technique with a phase object（T-PO）,for measuring optical nonlinear coefficients is proposed with a top-hat beam.The sensitivity of the T-PO with a top-hat beam is a factor of 4 greater than that with a Gaussian beam.The validity of this method is verified by measuring the nonlinearity of a well-characterized liquid,CS 2 at 532-nm wavelength.The ease of use of this method has been proved by measuring a new compound 4-（N-methyl,N-hydroxyethyl）amino,4＇-nitroazobenzene（ANAB） at 600-nm wavelength,indicating that this method can be extended to the measurement of optical nonlinearities in a wide-band spectrum.
文摘Ultrasound imaging is the most widely used noninvasive medical imaging modality. Its latest elite concept is Superharmonic Imaging which is the most talked-about future of medical diagnostic ultrasound. In this paper, the computational and analytical study for superharmonic field generation from phased array transducer of 16 × 16 elements is presented. For this, the model preferred, includes the calculation for diffraction effect in frequency domain and nonlinear effect in time domain. The attenuation is included along with the diffraction in frequency domain as well. The comparative analysis of superharmonic field is also carried out with simulated fundamental and second harmonic fields by the same model. Similarly, the comparison with the results from the literature is also reported.
文摘The aim of this work is evaluate the intergranular corrosion on UNS S31803 steel, with heat treatments at 800 ℃, varying treatment times of 30 mins, 360 mins and 1,440 mins. The results confirm the formation of o phases and secondary austenite （γ2）. For the analysis of the influence of o and γ2 phases, metallographic analysis were conducted through optical microscopy, potentiokinetic reactivation electrochemical techniques and potentiodynamic polarization in NaCI 3.5% solution. Microstructural analysis has shown a formation of γ2 and o phase in heat treatment, due to diffusion of chromium and molybdenum from δ phase to y phase, precipitating on δ/γ and δ/δ interfaces. The DL-EPR （Double loop electrochemical potentiokinetic reactivation） results have shown an increase of the DOS （degree of sensitization） for long periods of time on heat treatment. The results of potentiodynamic polarization showed a reduction of the corrosion and pitting potentials, followed by an increase of the current density when the UNS S31830 steel is heat treated during long periods of time.
文摘SAF2507 plates （ 12 mm thickness ） were welded using shield metal arc welding （SMAW） process with E2594 electrode. The microstructure, o-phase, and impact fraetograph of the welded joints were analyzed using optical microscope and scanning electron mieroseope. The results show that the fusion zone consists of ferrite, chromium nitride, and secondary aastenite precipitation when welding is performed at low heat input （0. 5 kJ/mm）. However, the increase in heat input causes precipitation of brittle o＂ phase at the y/c~ interface in weld metal and heat-affected zone, as well as a brittle fracture along the grain boundary. Heat input in the range of O. 5 kJ/mm to 1.5 kJ/mm is suitable for joining SAF2507 plates.
基金supported by the National Basic Research Program of China(2011CBA00700)the National High Technology Research and Development Program of China(2011AA050510)the National Natural Science Foundation of China(21273242,21003130,21173227)
文摘A room temperature ionic liquid crystal, 1-dodecyl-3-ethylimidazolium iodide （C12EImI）, and an ionic liquid, 1-decyl-3- ethylimidazolium iodide （Cl0EImI）, have been synthesized, characterized and employed as the electrolyte for dye-sensitized solar cells （DSSC）. The physicochemical properties show that a smectic A （SmA） phase with a lamellar structure is formed in CIzEImI. Both C^2EImI and Cl0EImI have good electrochemical and thermal stability facilitating their use in DSSC. The steady-state voltammograms reveal that the diffusion coefficient of I3- in C^2EImI is larger than that in CmEImI, which is at- tributed to the existence of the SmA phase in Ca2EImI. Because the iodide species are located between the layers of imidazo- lium cations in CjzEImI, exchange reaction-based diffusion is increased with a consequent increase in, the overall diffusion. The electrochemical impedance spectrum reveals that charge recombination at the dyed TiOJelectrolyte interface of a C12EImI-based DSSC is reduced due to the increase in I3- diffusion, resulting in higher open-circuit voltage. Moreover, both short-circuit current density and fill factor of the Cl2EImI based DSSC increase, as a result of the increasing transport of I3 in C^2EImI. Consequently, the photoelectric conversion efficiency of C^2EImI-based DSSC is higher than that of the Cl0EImI-based DSSC.
基金financially supported by the National Natural Science Foundation of China(Nos.21304009,31471639,21562043,21206083 and 21164013)the Program for Liaoning Excellent Talents in University(Nos.LJQ2014125 and LR2014033)the Liaoning Provincial Science&Technology Department(No.2015103020)
文摘Aromatic amphiphilic molecules（1） consisting of three biphenyl groups linked together with ether bonds as a rigid rod segment and poly（ethylene oxide） with the number of repeating units of 17 as a coil segment were synthesized, and their self-assembly behavior in the bulk state and aqueous solution was investigated. In bulk, molecules 1 self-assembled into 1-D lamellar structure in the solid state or smectic A phase in the liquid crystalline phase via the cooperative effects of ？-？ stacking, micro-phase separation and hydrogen bond interactions. In dilute aqueous solutions, molecules 1 were observed to selfassemble into cylindrical micelles owned uniform diameter and length of hundreds of nanometers.
