Density of excess modes below the first phonon mode in four-dimensional glasses

Glasses are known to possess low-frequency excess modes beyond the Debye prediction.For decades,it has been assumed that evolution of low-frequency density of excess modes D(ω) with frequency ω follows a power-law scaling:D(ω)~ω~γ.However,it remains debated on the value of γ at low frequencies below the first phonon-like mode in finitesize glasses.Early simulation studies reported γ=4 at low frequencies in two-(2D),three-(3D),and four-dimensional(4D)glasses,whereas recent observations in 2D and 3D glasses suggested γ=3.5 in a lower-frequency regime.It is uncertain whether the low-frequency scaling of D(ω)~ω^(3.5) could be generalized to 4D glasses.Here,we conduct numerical simulation studies of excess modes at frequencies below the first phonon-like mode in 4D model glasses.It is found that the system size dependence of D(ω) below the first phonon-like mode varies with spatial dimensions:D(ω) increases in2D glasses but decreases in 3D and 4D glasses as the system size increases.Furthermore,we demonstrate that the ω^(3.5)scaling,rather than the ω~4 scaling,works in the lowest-frequency regime accessed in 4D glasses,regardless of interaction potentials and system sizes examined.Therefore,our findings in 4D glasses,combined with previous results in 2D and 3D glasses,suggest a common low-frequency scaling of D(ω)~ ω^3.5) below the first phonon-like mode across different spatial dimensions,which would inspire further theoretical studies.

Evaluation of mitral chordae tendineae length using four-dimensional computed

BACKGROUND Mitral valvuloplasty using artificial chordae tendineae represents an effective surgical approach for treating mitral regurgitation.Achieving precise measurements of artificial chordae tendineae length(CL)is an important factor in the procedure;however,no objective index currently exists to facilitate this measurement.Therefore,preoperative assessment of CL is critical for surgical planning and support.Four-dimensional x-ray micro-computed tomography(4D-CT)may be useful for accurate CL measurement considering that it allows for dynamic three-dimensional(3D)evaluation compared to that with transthoracic echocardiography,a conventional inspection method.AIM To investigate the behavior and length of mitral chordae tendineae during systole using 4D-CT.METHODS Eleven adults aged>70 years without mitral valve disease were evaluated.A 64-slice CT scanner was used to capture 20 phases in the cardiac cycle in electrocardiographic synchronization.The length of the primary chordae tendineae was measured from early systole to early diastole using the 3D image.The primary chordae tendineae originating from the anterior papillary muscle and attached to the A1-2 region and those from the posterior papillary muscle and attached to the A2-3 region were designated as cA and cP,respectively.The behavior and maximum lengths[cA(ma),cP(max)]were compared,and the correlation with body surface area(BSA)was evaluated.RESULTS In all cases,the mitral anterior leaflet chordae tendineae could be measured.In most cases,the cA and cP chordae tendineae could be measured visually.The mean cA(max)and cP(max)were 20.2 mm±1.95 mm and 23.5 mm±4.06 mm,respectively.cP(max)was significantly longer.The correlation coefficients(r)with BSA were 0.60 and 0.78 for cA(max)and cP(max),respectively.Both cA and cP exhibited constant variation in CL during systole,with a maximum 1.16-fold increase in cA and a 1.23-fold increase in cP from early to mid-systole.For cP,CL reached a plateau at 15%and remained elongated until end-systole,whereas for cA,after peaking at 15%,CL shortened slightly and then moved toward its peak again as end-systole approached.CONCLUSION The study suggests that 4D-CT is a valuable tool for accurate measurement of both the length and behavior of chordae tendineae within the anterior leaflet of the mitral valve.

Intelligent geochemical interpretation of mass chromatograms:Based on convolution neural network

Gas chromatography-mass spectrometry(GC-MS)is an extremely important analytical technique that is widely used in organic geochemistry.It is the only approach to capture biomarker features of organic matter and provides the key evidence for oil-source correlation and thermal maturity determination.However,the conventional way of processing and interpreting the mass chromatogram is both timeconsuming and labor-intensive,which increases the research cost and restrains extensive applications of this method.To overcome this limitation,a correlation model is developed based on the convolution neural network(CNN)to link the mass chromatogram and biomarker features of samples from the Triassic Yanchang Formation,Ordos Basin,China.In this way,the mass chromatogram can be automatically interpreted.This research first performs dimensionality reduction for 15 biomarker parameters via the factor analysis and then quantifies the biomarker features using two indexes(i.e.MI and PMI)that represent the organic matter thermal maturity and parent material type,respectively.Subsequently,training,interpretation,and validation are performed multiple times using different CNN models to optimize the model structure and hyper-parameter setting,with the mass chromatogram used as the input and the obtained MI and PMI values for supervision(label).The optimized model presents high accuracy in automatically interpreting the mass chromatogram,with R2values typically above 0.85 and0.80 for the thermal maturity and parent material interpretation results,respectively.The significance of this research is twofold:(i)developing an efficient technique for geochemical research;(ii)more importantly,demonstrating the potential of artificial intelligence in organic geochemistry and providing vital references for future related studies.

An improved deep dilated convolutional neural network for seismic facies interpretation

With the successful application and breakthrough of deep learning technology in image segmentation,there has been continuous development in the field of seismic facies interpretation using convolutional neural networks.These intelligent and automated methods significantly reduce manual labor,particularly in the laborious task of manually labeling seismic facies.However,the extensive demand for training data imposes limitations on their wider application.To overcome this challenge,we adopt the UNet architecture as the foundational network structure for seismic facies classification,which has demonstrated effective segmentation results even with small-sample training data.Additionally,we integrate spatial pyramid pooling and dilated convolution modules into the network architecture to enhance the perception of spatial information across a broader range.The seismic facies classification test on the public data from the F3 block verifies the superior performance of our proposed improved network structure in delineating seismic facies boundaries.Comparative analysis against the traditional UNet model reveals that our method achieves more accurate predictive classification results,as evidenced by various evaluation metrics for image segmentation.Obviously,the classification accuracy reaches an impressive 96%.Furthermore,the results of seismic facies classification in the seismic slice dimension provide further confirmation of the superior performance of our proposed method,which accurately defines the range of different seismic facies.This approach holds significant potential for analyzing geological patterns and extracting valuable depositional information.

Angular unconformity in Pennsylvanian strata from 3-D seismic interpretation,Goldsmith Field,West Texas

The Pennsylvanian unconformity,which is a detrital surface,separates the beds of the Permian-aged strata from the Lower Paleozoic in the Central Basin Platform.Seismic data interpretation indicates that the unconformity is an angular unconformity,overlying multiple normal faults,and accompanied with a thrust fault which maximizes the region's structural complexity.Additionally,the Pennsylvanian angular unconformity creates pinch-outs between the beds above and below.We computed the spectral decomposition and reflector convergence attributes and analyzed them to characterize the angular unconformity and faults.The spectral decomposition attribute divides the broadband seismic data into different spectral bands to resolve thin beds and show thickness variations.In contrast,the reflector convergence attribute highlights the location and direction of the pinch-outs as they dip south at angles between 2° and 6°.After reviewing findings from RGB blending of the spectrally decomposed frequencies along the Pennsylvanian unconformity,we observed channel-like features and multiple linear bands in addition to the faults and pinch-outs.It can be inferred that the identified linear bands could be the result of different lithologies associated with the tilting of the beds,and the faults may possibly influence hydrocarbon migration or act as a flow barrier to entrap hydrocarbon accumulation.The identification of this angular unconformity and the associated features in the study area are vital for the following reasons:1)the unconformity surface represents a natural stratigraphic boundary;2)the stratigraphic pinch-outs act as fluid flow connectivity boundaries;3)the areal extent of compartmentalized reservoirs'boundaries created by the angular unconformity are better defined;and 4)fault displacements are better understood when planning well locations as faults can be flow barriers,or permeability conduits,depending on facies heterogeneity and/or seal effectiveness of a fault,which can affect hydrocarbon production.The methodology utilized in this study is a further step in the characterization of reservoirs and can be used to expand our knowledge and obtain more information about the Goldsmith Field.

Identification and distribution of 13003 landslides in the northwest margin of Qinghai-Tibet Plateau based on human-computer interaction remote sensing interpretation

The periphery of the Qinghai-Tibet Plateau is renowned for its susceptibility to landslides.However,the northwestern margin of this region,characterised by limited human activities and challenging transportation,remains insufficiently explored concerning landslide occurrence and dispersion.With the planning and construction of the Xinjiang-Tibet Railway,a comprehensive investigation into disastrous landslides in this area is essential for effective disaster preparedness and mitigation strategies.By using the human-computer interaction interpretation approach,the authors established a landslide database encompassing 13003 landslides,collectively spanning an area of 3351.24 km^(2)(36°N-40°N,73°E-78°E).The database incorporates diverse topographical and environmental parameters,including regional elevation,slope angle,slope aspect,distance to faults,distance to roads,distance to rivers,annual precipitation,and stratum.The statistical characteristics of number and area of landslides,landslide number density(LND),and landslide area percentage(LAP)are analyzed.The authors found that a predominant concentration of landslide origins within high slope angle regions,with the highest incidence observed in intervals characterised by average slopes of 20°to 30°,maximum slope angle above 80°,along with orientations towards the north(N),northeast(NE),and southwest(SW).Additionally,elevations above 4.5 km,distance to rivers below 1 km,rainfall between 20-30 mm and 30-40 mm emerge as particularly susceptible to landslide development.The study area’s geological composition primarily comprises Mesozoic and Upper Paleozoic outcrops.Both fault and human engineering activities have different degrees of influence on landslide development.Furthermore,the significance of the landslide database,the relationship between landslide distribution and environmental factors,and the geometric and morphological characteristics of landslides are discussed.The landslide H/L ratios in the study area are mainly concentrated between 0.4 and 0.64.It means the landslides mobility in the region is relatively low,and the authors speculate that landslides in this region more possibly triggered by earthquakes or located in meizoseismal area.

Application of Secondary Logging Interpretation—Taking Yan 9 Reservoir in X Area as an Example

Logging data and its interpretation results are one of the most important basic data for understanding reservoirs and oilfield development. Standardized and unified logging interpretation results play a decisive role in fine reservoir description and reservoir development. Aiming at the problem of the conflict between the development effect and the initial interpretation result of Yan 9 reservoir in Hujianshan area of Ordos Basin, by combining the current well production performance, logging, oil test, production test and other data, on the basis of making full use of core, coring, logging, thin section analysis and high pressure mercury injection data, the four characteristics of reservoir are analyzed, a more scientific and reasonable calculation model of reservoir logging parameters is established, and the reserves are recalculated after the second interpretation standard of logging is determined. The research improves the accuracy of logging interpretation and provides an effective basis for subsequent production development and potential horizons.

Effects and Causes of VR-Supported Interpreting Learning Environment on the Interpretation Classroom Anxiety of Student Interpreter

Interpreting activity is considered a high-anxiety activity due to its immediacy, multitasking, complexity of cognitive processing, and uncertainty of cognitive processing. Research has shown that interpreting anxiety, as the biggest emotional obstacle in the interpreting process, is the main emotional factor that leads to individual differences in interpreting. Students often claim to have fear or anxiety behaviors in interpreting exams, interpreting competitions, and interpreting classes. However, the research on interpreting teaching attaches importance to the cultivation of language knowledge, cultural knowledge, and interpreting skills, and does not pay enough attention to emotional factors such as motivation and anxiety in interpreting learning, which makes it difficult for the cultivated interpreters to meet the requirements of professional practice. In recent years, virtual reality technology (VR) has been gradually applied in the field of foreign language and interpreting teaching for creating a real, interactive and experiential language learning environment. Situated Learning Theory stresses that the fundamental mechanism for learning to take place is for individuals to participate in the real context in which knowledge is generated, and to realize the construction of knowledge through the interaction with the community of practice and the environment. Virtual reality technology can satisfy the needs of language learners for real contexts by providing learners with immersive, imaginative and interactive scenario simulations, and has a certain positive effect on alleviating learning anxiety. Therefore, relying on the virtual simulation course “United Nations Kubuqi International Desert Ecological Science and Technology Innovation International Volunteer Language Service Practical Training System”, this paper adopts a combination of quantitative and qualitative analyses to investigate the interpretation anxiety level of the interpreter trainees and the factors affecting them in the VR situation to help them discover effective responses to interpreter anxiety.

Preliminary report of coseismic surface rupture(part)of Türkiye's M_(W)7.8 earthquake by remote sensing interpretation

Both M_(W) 7.8 and M_(W) 7.5 earthquakes occurred in southeastern Türkiye on February 6,2023,resulting in numerous buildings collapsing and serious casualties.Understanding the distribution of coseismic surface ruptures and secondary disasters surrounding the epicentral area is important for post-earthquake emergency and disaster assessments.High-resolution Maxar and GF-2 satellite data were used after the events to extract the location of the rupture surrounding the first epicentral area.The results show that the length of the interpreted surface rupture zone(part of)is approximately 75 km,with a coseismic sinistral dislocation of 2-3 m near the epicenter;however,this reduced to zero at the tip of the southwest section of the East Anatolia Fault Zone.Moreover,dense soil liquefaction pits were triggered along the rupture trace.These events are in the western region of the Eurasian Seismic Belt and result from the subduction and collision of the Arabian and African Plates toward the Eurasian Plate.The western region of the Chinese mainland and its adjacent areas are in the eastern section of the Eurasian Seismic Belt,where seismic activity is controlled by the collision of the Indian and Eurasian Plates.Both China and Türkiye have independent tectonic histories.

Problems of Music Interpretation and Its Expression: On the Example of the Violin

Music is essentially a sonic phenomenon, an intangible art that we experience through our auditory organs. It is written as a physical note on paper. It is the result of harmony and composition of music that expresses the meaning of music created from the author’s mind, thinking, skills, and feelings, or composition or work. If a composition is not interpreted by a musician and set to music, it is nothing more than a notation and notation written down on paper. The main process of conveying the composition to the listeners through the musician’s interpretation of the music is somewhat overlooked. Therefore, in this research, the musician’s thinking and editing method, and how to express it through interpretation, were the doctoral dissertation and articles of researchers such as have been studied in comparison.

A method to interpret fracture aperture of rock slope using adaptive shape and unmanned aerial vehicle multi-angle nap-of-the-object photogrammetry

The aperture of natural rock fractures significantly affects the deformation and strength properties of rock masses,as well as the hydrodynamic properties of fractured rock masses.The conventional measurement methods are inadequate for collecting data on high-steep rock slopes in complex mountainous regions.This study establishes a high-resolution three-dimensional model of a rock slope using unmanned aerial vehicle(UAV)multi-angle nap-of-the-object photogrammetry to obtain edge feature points of fractures.Fracture opening morphology is characterized using coordinate projection and transformation.Fracture central axis is determined using vertical measuring lines,allowing for the interpretation of aperture of adaptive fracture shape.The feasibility and reliability of the new method are verified at a construction site of a railway in southeast Tibet,China.The study shows that the fracture aperture has a significant interval effect and size effect.The optimal sampling length for fractures is approximately 0.5e1 m,and the optimal aperture interpretation results can be achieved when the measuring line spacing is 1%of the sampling length.Tensile fractures in the study area generally have larger apertures than shear fractures,and their tendency to increase with slope height is also greater than that of shear fractures.The aperture of tensile fractures is generally positively correlated with their trace length,while the correlation between the aperture of shear fractures and their trace length appears to be weak.Fractures of different orientations exhibit certain differences in their distribution of aperture,but generally follow the forms of normal,log-normal,and gamma distributions.This study provides essential data support for rock and slope stability evaluation,which is of significant practical importance.

Enhancing Emergency ECG Interpretation: A Practical Checklist Developed from a Study Assessing Young Physicians’ Diagnostic Abilities

Effective interpretation of electrocardiograms (ECGs) is a critical skill for healthcare professionals, especially in emergency settings. This study assessed the diagnostic abilities of 200 final-year medical students and young doctors in ECG interpretation. Subsequently, based on the study findings, a practical checklist was developed, and a comprehensive book entitled “Critical ECG in Emergencies” was authored by the researchers. The checklist provides cognitive aids and serves as a systematic guide to enhance ECG interpretation in urgent situations. The study revealed a need for improved confidence in interpreting critical ECGs among the participants. The checklist offers promise for reducing diagnostic errors and improving patient outcomes. Further research is required to evaluate its impact on daily practice and patient care, while the book provides valuable resources for healthcare professionals in emergency medicine.

Evaluation of Hydrocarbon Reservoir in the “SIMA” Field of Niger Delta Nigeria from Interpretation of 3D Seismic and Petrophysical Log Data

3D seismic and petrophysical log data interpretation of reservoir sands in “SIMA” Field, onshore Niger Delta has been undertaken in this study to ascertain the reservoir characteristics in terms of favourable structural and petrophysical parameters suitable for hydrocarbon accumulation and entrapment in the field. Horizon and fault interpretation were carried out for subsurface structural delineation. In all, seven faults (five normal and two listric faults) were mapped in the seismic section. These faults were major structure building faults corresponding to the growth and antithetic faults in the area within the well control. The antithetic fault trending northwest-southeast and the normal fault trending northeast-southwest on the structural high in the section act as good trapping mechanisms for hydrocarbon accumulations in the reservoir. From the manual and auto-tracking methods applied, several horizons were identified and mapped. The section is characterized by high amplitude with moderate-to-good continuity reflections appearing parallel to sub-parallel, mostly disturbed by some truncations which are more fault related than lithologic heterogeneity. The southwestern part is, however, characterized by low-to-high or variable amplitude reflections with poor-to-low continuity. Normal faults linked to roll-over anticlines were identified. Some fault truncations were observed due to lithologic heterogeneity. The combination of these faults acts as good traps for hydrocarbon accumulations in the reservoir. Reservoir favourable petrophysical qualities, having average NTG, porosity, permeability and water saturation of 5 m, 0.20423, 1128.219 kD and 0.458 respectively.

Physical Interpretation of Electricity and Magnetism and Electromagnetic Induction

Electricity and magnetism and electromagnetic induction are phenomena that can be perceived by people. But their interpretation and theoretical study took a long time. The theoretical research on electricity began with the discovery of Coulomb’s law in 1785, while the theoretical research on magnetism began with the discovery of Oersted’s Law in 1820. From the 1850s to the 1870s, Maxwell summarized a set of theoretical equations for electromagnetism based on some laws of predecessors. However, this set of equations contains a few statistical relationships and empirical concepts, so it is difficult to explain the physical nature of electromagnetic phenomena and principles. This paper explained that the macro phenomenon of electricity is the separation of unlike charges of new electrons produced by the orthogonal collision of old particles under the action of external forces. The physical nature of magnetism is the potential energy (magnetic energy) and information associated with the overall orientation of the moving electrons solidly recorded in the material. The physical principle of electromagnetic induction describes how change in electric current intensity generates change in magnetic intensity and vice versa through orthogonal interaction of ordered electrons. This theoretical interpretation does not require the concepts of traditional electromagnetic forces, electromagnetic fields, magnetic moments, and magnetic domains.

Earthquake-triggered landslide interpretation model of high resolution remote sensing imageries based on bag of visual word

Traditional visual interpretation is often inefficient due to its excessively workload professional knowledge and strong subjectivity.Therefore,building an automatic interpretation model on high spatial resolution remote sensing images is the key to the quick and efficient interpretation of earthquake-triggered landslides.Aiming at addressing this problem,a landslide interpretation model of high-resolution images based on bag of visual word(BoVW)feature was proposed.The high-resolution images were pre-processed,and then BoVW feature and support vector machine(SVM)was adopted to establish an automatic landslide interpretation model.This model was further compared with the currently widely used Histogram of Oriented Gradient(HoG)feature extraction model.In order to test the effectiveness of the method,typical landslide images were selected to construct a landslide sample library,which was subsequently utilized as the foundation for conducting an experimental study.The results show that the accuracy of landslide extraction using this method reaches as high as 89%,indicating that the method can be used for the automatic interpretation of landslides in disaster-prone areas,and has high practical value for regional disaster prevention and damage reduction.

Exploration of Cross-Cultural Pragmatic Failures in English Interpretation and Their Solutions

From the perspective of international market development and international cultural exchange,English is the main applied language,especially in most western countries.With the deepening of global economic integration and international trade,cultural collisions are becoming increasingly frequent,and interpretation in different languages is inevitably required.However,interpretation does not only mean transfer language,it also involves culture.In the practice of interpretation,some errors arise from the lack of cross-cultural awareness,which becomes pragmatic errors.Therefore,this article will mainly discuss cross-cultural pragmatic failures in English interpretation with some examples and specific solutions.Firstly,it will introduce what pragmatic failures are and typical types of failures,clarify the relationship between English interpretation and pragmatic failures,and then elaborate on representative cross-cultural pragmatic failures in English interpretation.Finally,it will summarize the reasons and solutions that lead to cross-cultural pragmatic failures in English interpretation,putting forward corresponding suggestions for reducing cross-cultural pragmatic failures.

Interpretation,Narrative and Study of“Disaster”Scenarios in Western Literature

Disaster runs through the whole process of human development.As a common topic faced by mankind anywhere and anytime,disaster has become the object of consideration and writing by writers in every country.This paper first identifies the etymological meaning of“disaster”in Western language and culture,and then examines the main representations of Western“disaster”literature in terms of literary genre,developing trajectory and thematic characteristics.Finally,the paper summarizes the researches of Western“disaster”literature,and provide references for worldwide study of“disaster”literature.

Four-Dimensional Mathematics Creates the Super Universe

In the common theory of the Universe, the redshift of the light wavelength from distant stars indicates the speed of the star. In this study, the model of the Universe is the surface volume of the four-dimensional sphere, and the shape of the Universe results in the most of the redshift of light wavelength. Therefore, there is no dark energy accelerating the Universe. The surface of the four-dimensional sphere is a volume, and this volume is a good model for the Universe. The surface volume of the four-dimensional sphere has been explained by a model of four-dimensional cube, within which the forming of surface volume can be easily shown. The model of four-dimensional cube containing six side cubes is ingenious for explaining the structure of the four-dimensional Universe, but it is not enough because the four-dimensional cube has not six side cubes, but eight side cubes. Therefore, in this study a better method has been created to construct the four-dimensional cube. Our three-dimensional Universe is the surface of the four-dimensional sphere Universe. The volume of our three-dimensional Universe is finite, and beneath it is the infinite volume four-dimensional Super Universe. Two important basic formulae have been derived: The surface volume of the four-dimensional sphere is π3R3 in which R is the radius of the sphere, and the fourth-power volume of the four-dimensional sphere is 1/4 π3R4. The volume of the Universe has been calculated π3R3 = 62 × 1030 ly3. Time as the fourth dimension of the space takes effect only near the speed of light, and therefore it has been ignored in this study.

A Physical Interpretation of Mass-Energy Equivalence Based on the Orthogonal Collision

Einstein described the mass-energy equivalence as the most important result of special relativity. But more than a century after Einstein first derived the relationship between mass-energy equivalence (or mass-energy equation), questions left for people are how to understand that mass and energy are somehow equivalent, and how to give the dynamical process for the conversion from mass to energy (or vice versa). This paper first interprets the formula of mass-energy equivalence published by Einstein in 1905, and then gives the equivalence relationship of mass-energy transition based on the dynamics of particle orthogonal collision. As a result, the orthogonal collision of two high-energy mass particles can generate a huge mass-energy density, equivalent to the total energy of N new particles, which is a one-way dynamic process that generates new mass-energy density and new matter. This conversion of mass into energy has nothing to do with special relativity.

Research on Well Testing Interpretation of Low Permeability Deformed Dual Medium Reservoir

Considering the influence of quadratic gradient term and medium deformation on the seepage equation, a well testing interpretation model for low permeability and deformation dual medium reservoirs was derived and established. The difference method was used to solve the problem, and pressure and pressure derivative double logarithmic curves were drawn to analyze the seepage law. The research results indicate that the influence of starting pressure gradient and medium deformation on the pressure characteristic curve is mainly manifested in the middle and late stages. The larger the value, the more obvious the upward warping of the pressure and pressure derivative curve;the parameter characterizing the dual medium is the crossflow coefficient. The channeling coefficient determines the time and location of the appearance of the “concave”. The smaller the value, the later the appearance of the “concave”, and the more to the right of the “concave”.