Potential energy surfaces(PESs), vibrational frequencies, and infrared spectra are calculated for NF_(3)^(+) using ab initio calculations, based on UCCSD(T)/cc-p VTZ combined with vibrational configuration interaction...Potential energy surfaces(PESs), vibrational frequencies, and infrared spectra are calculated for NF_(3)^(+) using ab initio calculations, based on UCCSD(T)/cc-p VTZ combined with vibrational configuration interaction(VCI). Based on an iterative algorithm, the surfaces(SURF) program adds automatic points to the lattice representation of the potential function, the one-dimensional and two-dimensional PESs are calculated after reaching a convergence threshold, finally the smooth image of the potential energy surface is fitted. The PESs accurately account for the interaction between the different modes, with the mode q_(6) symmetrical stretching vibrations having the greatest effect on the potential energy change of the whole system throughout the potential energy surface shift. The anharmonic frequencies are obtained when the VCI matrix is diagonalized. Fundamental frequencies, overtones, and combination bands of NF_(3)^(+) are calculated, which generate the degenerate phenomenon between their frequencies. Finally, the calculated anharmonic frequency is used to plot the infrared spectra.Modal antisymmetric stretching ν_(5) and symmetric stretching ν_(6) exhibit a phenomenon of large-intensity borrowing. This study can provide data to support the characterization in the laboratory.展开更多
The experimental research programs of 1950s, to understand the adsorption of CO on W surfaces, changed to ab initio studies in 2000s. The goals were to seek improved practical applications. Most of the studies were ba...The experimental research programs of 1950s, to understand the adsorption of CO on W surfaces, changed to ab initio studies in 2000s. The goals were to seek improved practical applications. Most of the studies were based on density functional theory. Many studies also used programs, such as VASP (Vienna Abinitio simulation package) and CPMD. The computational procedures used plane wave approximations. This needed studies with selection of K points and cutoff energy selection to assure convergence in energy calculations. Observations and analysis of papers published from 2006 to 2022 indicate that the cutoff energies were selected arbitrarily without any needed convergence studies. By selecting a published 2006 paper, this paper has clearly showed that an arbitrary selection of cutoff energy, such as 460 eV, is not in the range of, cutoff energies that assure convergence of energy calculations, with ab initio methods and have indicated correction procedures. .展开更多
In this letter ab initio electronic structure calculations are performed for extensive geometries Of CS2. A newly written program is used to fit the computed energies into the Sorbie-Murrel function, whose contour plo...In this letter ab initio electronic structure calculations are performed for extensive geometries Of CS2. A newly written program is used to fit the computed energies into the Sorbie-Murrel function, whose contour plots are illustrated.展开更多
A globally accurate single-sheeted double many-body expansion potential energy surface is reported for the first excited state of HS_2 by fitting the accurate ab initio energies, which are calculated at the multirefer...A globally accurate single-sheeted double many-body expansion potential energy surface is reported for the first excited state of HS_2 by fitting the accurate ab initio energies, which are calculated at the multireference configuration interaction level with the aug-cc-pVQZ basis set. By using the double many-body expansion-scaled external correlation method,such calculated ab initio energies are then slightly corrected by scaling their dynamical correlation. A grid of 2767 ab initio energies is used in the least-square fitting procedure with the total root-mean square deviation being 1.406 kcal · mol^(-1).The topographical features of the HS_2(A_2A') global potential energy surface are examined in detail. The attributes of the stationary points are presented and compared with the corresponding ab initio results as well as experimental and other theoretical data, showing good agreement. The resulting potential energy surface of HS_2(A_2A') can be used as a building block for constructing the global potential energy surfaces of larger S/H molecular systems and recommended for dynamic studies on the title molecular system.展开更多
Kinetic investigations including quasi-classical trajectory and canonical unified statistical theory method calculations are carried out on a potential energy surface for the hydrogen-abstraction reaction from methane...Kinetic investigations including quasi-classical trajectory and canonical unified statistical theory method calculations are carried out on a potential energy surface for the hydrogen-abstraction reaction from methane by atom O(^3P).The surface is constructed using a modified Shepard interpolation method.The ab initio calculations are performed at the CCSD(T)level.Taking account of the contribution of inner core electrons to electronic correlation interaction in ab initio electronic structure calculations,modified optimized aug-cc-pCVQZ basis sets are applied to the all-electrons calculations.On this potential energy surface,the triplet oxygen atom attacks methane in a near-collinear H-CH3 direction to form a saddle point with barrier height of 13.55 kcal/mol,which plays a key role in the kinetics of the title reaction.For the temperature range of 298-2500 K,our calculated thermal rate constants for the O(^3P)+CH4→OH+CH3 reaction show good agreement with relevant experimental data.This work provides detailed mechanism of this gas-phase reaction and a theoretical guidance for methane combustion.展开更多
An ab initio analytical potential energy surface called BW3 for the CIH2 reactive system is presented. The fit of this surface is based on about 1 200 ab initio energy points, computed with multi-reference configurati...An ab initio analytical potential energy surface called BW3 for the CIH2 reactive system is presented. The fit of this surface is based on about 1 200 ab initio energy points, computed with multi-reference configuration interaction(MRCI) and scaling external correlation (SEC) method and a very large basis set. The precision in the fit is very high. The BW3 surface could reproduce correctly the dissociation energy of H2 and HCI, and the endothermicity of the Cl + H2 abstraction reaction. For the Cl + H2 abstraction reaction, the saddle point of BW3 lies in collinear geometries, and the barrier height is 32.84 kJ/mol; for the H + CIH exchange reaction, the barrier of BW3 is also linear, with a height of 77.40 kJ/mol.展开更多
I. INTRODUCTION The chemisorption characteristics and reactivity near the ledge on the stepped surface as a defect on solid surface are worth noticing. In many cases, defects on metal surface not only control the adso...I. INTRODUCTION The chemisorption characteristics and reactivity near the ledge on the stepped surface as a defect on solid surface are worth noticing. In many cases, defects on metal surface not only control the adsoprtion rate of the gas molecule, but also have an impotant influence on the formation of a veriety of catalysates. For example, studying the catalytic oxidation展开更多
An accurate three-dimensional potential energy surface(PES) for the He-Na2 van der Waals comple was calculated at the coupled cluster singles-and-doubles with noniterative inclusion of connecte triple(CCSD(T)) level o...An accurate three-dimensional potential energy surface(PES) for the He-Na2 van der Waals comple was calculated at the coupled cluster singles-and-doubles with noniterative inclusion of connecte triple(CCSD(T)) level of theory.A mixed basis set,aug-cc-pVQZ for the He atom and cc-pCVQZ for th sodium atom,and an additional(3s3p2d1f) set of midbond functions were used.The computed inte action energies in 819 configurations were fitted to a 96-parameter analytic potential model by leas squares fitting.The PES has two shallow wells corresponding to the T-shaped structure and the linea configuration,which are located at 12.5a0 and 14 a0 with depths of 1.769 and 1.684 cm-1,respectivel The whole potential energy surface exhibits weak anisotropy.Based on the fitted PES,state-to-stat differential cross sections were calculated.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant Nos.52002318 and 22103061)。
文摘Potential energy surfaces(PESs), vibrational frequencies, and infrared spectra are calculated for NF_(3)^(+) using ab initio calculations, based on UCCSD(T)/cc-p VTZ combined with vibrational configuration interaction(VCI). Based on an iterative algorithm, the surfaces(SURF) program adds automatic points to the lattice representation of the potential function, the one-dimensional and two-dimensional PESs are calculated after reaching a convergence threshold, finally the smooth image of the potential energy surface is fitted. The PESs accurately account for the interaction between the different modes, with the mode q_(6) symmetrical stretching vibrations having the greatest effect on the potential energy change of the whole system throughout the potential energy surface shift. The anharmonic frequencies are obtained when the VCI matrix is diagonalized. Fundamental frequencies, overtones, and combination bands of NF_(3)^(+) are calculated, which generate the degenerate phenomenon between their frequencies. Finally, the calculated anharmonic frequency is used to plot the infrared spectra.Modal antisymmetric stretching ν_(5) and symmetric stretching ν_(6) exhibit a phenomenon of large-intensity borrowing. This study can provide data to support the characterization in the laboratory.
文摘The experimental research programs of 1950s, to understand the adsorption of CO on W surfaces, changed to ab initio studies in 2000s. The goals were to seek improved practical applications. Most of the studies were based on density functional theory. Many studies also used programs, such as VASP (Vienna Abinitio simulation package) and CPMD. The computational procedures used plane wave approximations. This needed studies with selection of K points and cutoff energy selection to assure convergence in energy calculations. Observations and analysis of papers published from 2006 to 2022 indicate that the cutoff energies were selected arbitrarily without any needed convergence studies. By selecting a published 2006 paper, this paper has clearly showed that an arbitrary selection of cutoff energy, such as 460 eV, is not in the range of, cutoff energies that assure convergence of energy calculations, with ab initio methods and have indicated correction procedures. .
文摘In this letter ab initio electronic structure calculations are performed for extensive geometries Of CS2. A newly written program is used to fit the computed energies into the Sorbie-Murrel function, whose contour plots are illustrated.
基金Project supported by the National Natural Science Foundation of China(Grant No.11304185)the Taishan Scholar Project of Shandong Province,China+3 种基金the Shandong Provincial Natural Science Foundation,China(Grant No.ZR2014AM022)the Shandong Province Higher Educational Science and Technology Program,China(Grant No.J15LJ03)the China Postdoctoral Science Foundation(Grant No.2014M561957)the Post-doctoral Innovation Project of Shandong Province,China(Grant No.201402013)
文摘A globally accurate single-sheeted double many-body expansion potential energy surface is reported for the first excited state of HS_2 by fitting the accurate ab initio energies, which are calculated at the multireference configuration interaction level with the aug-cc-pVQZ basis set. By using the double many-body expansion-scaled external correlation method,such calculated ab initio energies are then slightly corrected by scaling their dynamical correlation. A grid of 2767 ab initio energies is used in the least-square fitting procedure with the total root-mean square deviation being 1.406 kcal · mol^(-1).The topographical features of the HS_2(A_2A') global potential energy surface are examined in detail. The attributes of the stationary points are presented and compared with the corresponding ab initio results as well as experimental and other theoretical data, showing good agreement. The resulting potential energy surface of HS_2(A_2A') can be used as a building block for constructing the global potential energy surfaces of larger S/H molecular systems and recommended for dynamic studies on the title molecular system.
基金Project supported by the National Natural Science Foundation of China(Grant No.51574016)and completed while the author was in residence at UNSW,Australia supported by the International Cooperation Training Program for Innovative Talents of USTB.
文摘Kinetic investigations including quasi-classical trajectory and canonical unified statistical theory method calculations are carried out on a potential energy surface for the hydrogen-abstraction reaction from methane by atom O(^3P).The surface is constructed using a modified Shepard interpolation method.The ab initio calculations are performed at the CCSD(T)level.Taking account of the contribution of inner core electrons to electronic correlation interaction in ab initio electronic structure calculations,modified optimized aug-cc-pCVQZ basis sets are applied to the all-electrons calculations.On this potential energy surface,the triplet oxygen atom attacks methane in a near-collinear H-CH3 direction to form a saddle point with barrier height of 13.55 kcal/mol,which plays a key role in the kinetics of the title reaction.For the temperature range of 298-2500 K,our calculated thermal rate constants for the O(^3P)+CH4→OH+CH3 reaction show good agreement with relevant experimental data.This work provides detailed mechanism of this gas-phase reaction and a theoretical guidance for methane combustion.
文摘An ab initio analytical potential energy surface called BW3 for the CIH2 reactive system is presented. The fit of this surface is based on about 1 200 ab initio energy points, computed with multi-reference configuration interaction(MRCI) and scaling external correlation (SEC) method and a very large basis set. The precision in the fit is very high. The BW3 surface could reproduce correctly the dissociation energy of H2 and HCI, and the endothermicity of the Cl + H2 abstraction reaction. For the Cl + H2 abstraction reaction, the saddle point of BW3 lies in collinear geometries, and the barrier height is 32.84 kJ/mol; for the H + CIH exchange reaction, the barrier of BW3 is also linear, with a height of 77.40 kJ/mol.
基金Project supported by the National Natural Science Foundation of China
文摘I. INTRODUCTION The chemisorption characteristics and reactivity near the ledge on the stepped surface as a defect on solid surface are worth noticing. In many cases, defects on metal surface not only control the adsoprtion rate of the gas molecule, but also have an impotant influence on the formation of a veriety of catalysates. For example, studying the catalytic oxidation
基金the Natural Science Foundation of Anhui Educational Committee(Grant No.2006kj072A)the Natural Science Foundation of Anhui Province(Grant No.070416236)
文摘An accurate three-dimensional potential energy surface(PES) for the He-Na2 van der Waals comple was calculated at the coupled cluster singles-and-doubles with noniterative inclusion of connecte triple(CCSD(T)) level of theory.A mixed basis set,aug-cc-pVQZ for the He atom and cc-pCVQZ for th sodium atom,and an additional(3s3p2d1f) set of midbond functions were used.The computed inte action energies in 819 configurations were fitted to a 96-parameter analytic potential model by leas squares fitting.The PES has two shallow wells corresponding to the T-shaped structure and the linea configuration,which are located at 12.5a0 and 14 a0 with depths of 1.769 and 1.684 cm-1,respectivel The whole potential energy surface exhibits weak anisotropy.Based on the fitted PES,state-to-stat differential cross sections were calculated.