In order to design the scale model in a wide frequency range,a method based on the reflective loss is proposed according to the high-frequency approximation algorithm,and an example of designing the scale model of a p...In order to design the scale model in a wide frequency range,a method based on the reflective loss is proposed according to the high-frequency approximation algorithm,and an example of designing the scale model of a plate-shaped absorber is given in this paper.In the example,the frequency of the full-size measurement ranges from 2.0 GHz to 2.4 GHz,the thickness of the full-size absorber is 1 mm and the scale ratio is 1/5.A two-layer scale absorber is obtained by the proposed method.The thickness values of the bottom and top layer are 0.4 mm and 0.5 mm,respectively.Furthermore,the scattering properties of a plate model and an SLICY model are studied by FEKO to verify the effectiveness of the designed scale absorber.Compared with the corresponding values from the theoretical scale model,the average values of the absolute deviations in 10 GHz～12 GHz are 0.53 d Bm^2,0.65 d Bm^2,0.76 d Bm^2 for the plate model and 0.20 d Bm^2,0.95 d Bm^2,0.77 d Bm^2 for the SLICY model while the incident angles are 0°,30°,and 60°,respectively.These deviations fall within the Radar cross section（RCS） measurement tolerance.Thus,the work in this paper has important theoretical and practical significance.展开更多
The multilayer impedance composite sound absorption structure of the new muffler is proposed by combining the microporous plate structure with the resonant sound absorption structure of the porous material.Firstly,the...The multilayer impedance composite sound absorption structure of the new muffler is proposed by combining the microporous plate structure with the resonant sound absorption structure of the porous material.Firstly,the acoustic impedance and acoustic absorption coefficient of the new muffler structure are calculated by acoustic electric analogy method,and then the noise attenuation is calculated.When the new muffler structure parameters change,the relationship among the noise frequency,the sound absorption coefficient and the noise attenuation is calculated by using MATLAB.Finally,the calculated results are compared with the experimental data to verify the correctness of the theoretical calculation.The variation of resonance peak,resonance frequency and attenuation band width of each structural parameter is analyzed by the relation curve.The conclusion shows that it is feasible to use multilayer sound absorbing materials as the body structure of the new muffler.And the influence relationship between the change of various parameters of the sound absorption structure with the sound absorption coefficient and noise attenuation is obtained.展开更多
In this work, we have selected three number of stepped type solar stills of the same overall dimensions 620 mm (W) × 808 mm (L) but with different absorber surface areas due to the variation in the shape of the b...In this work, we have selected three number of stepped type solar stills of the same overall dimensions 620 mm (W) × 808 mm (L) but with different absorber surface areas due to the variation in the shape of the basin surface. The other design parameters like depth of water, thickness of glass cover, insulation thickness, type of condensing cover, absorbing material provided over the basin, and angle of inclination of the still were kept constant to study the effect of shape of the absorber surface over the distillate yield obtained. The shape of the absorber surface provided in the basins of solar stills A, E and F was flat, convex and concave respectively. When the convex and concave type stepped solar stills are used, the average daily water production has been found to be 56.60% and 29.24% higher than that of flat type stepped solar still respectively. Also an economic analysis was made. The payback period of flat type, convex type and concave type stepped solar still is 823 days, 525 days and 637 days respectively. Thus, the convex type solar still gives the returns within the least possible time as compared to other two types of stepped solar stills. The laboratory tests were conducted to test the quality of water after distillation. The tests indicate that the quality of water in terms of pH, electrical conductivity, total hardness, TDS, Alkalinity, Nitrates etc. is well within the desirable limits as prescribed by WHO for Indian specific conditions.展开更多
A method of electroless plating was utilized to deposit Cu, Ni, Co, Ag on the surface of carbon nanotubes （CNTs） respectively, in order to prepare millimeter-wave absorbing materials. Field emission scanning electro...A method of electroless plating was utilized to deposit Cu, Ni, Co, Ag on the surface of carbon nanotubes （CNTs） respectively, in order to prepare millimeter-wave absorbing materials. Field emission scanning electron microscope （FE-SEM） and energy dispersive spectrometer （EDS） were used to observe morphologies and chemical compositions of the samples respectively. Millime- ter-wave radiometer imaging detection was employed to measure the absorbing properties of the sam- ples. FE-SEM and EDS results demonstrate the effectiveness of successful metal deposition. The re- suits of millimeter-wave radiometer imaging detection reveal that the millimeter-wave absorbing properties of electroless-silver plating are better than other kinds of samples.展开更多
A composite absorber made of a polyurethane sponge and multi-layer micro-perforated plates is pre-sented in this study.Results from an acoustic impedance tube test show that the polyurethane sponge can exhibits higher...A composite absorber made of a polyurethane sponge and multi-layer micro-perforated plates is pre-sented in this study.Results from an acoustic impedance tube test show that the polyurethane sponge can exhibits higher low-frequency sound absorption in front of the micro-perforated plate,while sound absorption at medium and high-frequencies remains low.The physical mechanism behind this is that the micro-perforated plate increases the denpth cavity.If the polyurethane sponge is placed behind the micro-perforated plate,the amplitude of the original absorption peak will remain constant,but the ab-sorption peaks will shift to lower frequencies.The reason for this phenomenon is that porous materials with low flow resistance can be approximately equivalent to fluid,which not only does not affect the res-onance absorption coefficient of micro-perforated plate,but also makes the peaks move to low frequency.This study has the potential applications in the sound absorption design of composite structure.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61601299 and 11404213)the Shanghai Municipal Science and Technology Commission,China(Grant Nos.17210730900 and 15ZR1439600)the Defense Industrial Technology,China(Grant No.B2120132001)
文摘In order to design the scale model in a wide frequency range,a method based on the reflective loss is proposed according to the high-frequency approximation algorithm,and an example of designing the scale model of a plate-shaped absorber is given in this paper.In the example,the frequency of the full-size measurement ranges from 2.0 GHz to 2.4 GHz,the thickness of the full-size absorber is 1 mm and the scale ratio is 1/5.A two-layer scale absorber is obtained by the proposed method.The thickness values of the bottom and top layer are 0.4 mm and 0.5 mm,respectively.Furthermore,the scattering properties of a plate model and an SLICY model are studied by FEKO to verify the effectiveness of the designed scale absorber.Compared with the corresponding values from the theoretical scale model,the average values of the absolute deviations in 10 GHz～12 GHz are 0.53 d Bm^2,0.65 d Bm^2,0.76 d Bm^2 for the plate model and 0.20 d Bm^2,0.95 d Bm^2,0.77 d Bm^2 for the SLICY model while the incident angles are 0°,30°,and 60°,respectively.These deviations fall within the Radar cross section（RCS） measurement tolerance.Thus,the work in this paper has important theoretical and practical significance.
基金National Natural Science Foundation of China(Nos.51705545 and 15A460041)。
文摘The multilayer impedance composite sound absorption structure of the new muffler is proposed by combining the microporous plate structure with the resonant sound absorption structure of the porous material.Firstly,the acoustic impedance and acoustic absorption coefficient of the new muffler structure are calculated by acoustic electric analogy method,and then the noise attenuation is calculated.When the new muffler structure parameters change,the relationship among the noise frequency,the sound absorption coefficient and the noise attenuation is calculated by using MATLAB.Finally,the calculated results are compared with the experimental data to verify the correctness of the theoretical calculation.The variation of resonance peak,resonance frequency and attenuation band width of each structural parameter is analyzed by the relation curve.The conclusion shows that it is feasible to use multilayer sound absorbing materials as the body structure of the new muffler.And the influence relationship between the change of various parameters of the sound absorption structure with the sound absorption coefficient and noise attenuation is obtained.
文摘In this work, we have selected three number of stepped type solar stills of the same overall dimensions 620 mm (W) × 808 mm (L) but with different absorber surface areas due to the variation in the shape of the basin surface. The other design parameters like depth of water, thickness of glass cover, insulation thickness, type of condensing cover, absorbing material provided over the basin, and angle of inclination of the still were kept constant to study the effect of shape of the absorber surface over the distillate yield obtained. The shape of the absorber surface provided in the basins of solar stills A, E and F was flat, convex and concave respectively. When the convex and concave type stepped solar stills are used, the average daily water production has been found to be 56.60% and 29.24% higher than that of flat type stepped solar still respectively. Also an economic analysis was made. The payback period of flat type, convex type and concave type stepped solar still is 823 days, 525 days and 637 days respectively. Thus, the convex type solar still gives the returns within the least possible time as compared to other two types of stepped solar stills. The laboratory tests were conducted to test the quality of water after distillation. The tests indicate that the quality of water in terms of pH, electrical conductivity, total hardness, TDS, Alkalinity, Nitrates etc. is well within the desirable limits as prescribed by WHO for Indian specific conditions.
文摘A method of electroless plating was utilized to deposit Cu, Ni, Co, Ag on the surface of carbon nanotubes （CNTs） respectively, in order to prepare millimeter-wave absorbing materials. Field emission scanning electron microscope （FE-SEM） and energy dispersive spectrometer （EDS） were used to observe morphologies and chemical compositions of the samples respectively. Millime- ter-wave radiometer imaging detection was employed to measure the absorbing properties of the sam- ples. FE-SEM and EDS results demonstrate the effectiveness of successful metal deposition. The re- suits of millimeter-wave radiometer imaging detection reveal that the millimeter-wave absorbing properties of electroless-silver plating are better than other kinds of samples.
基金by Aeronautical Science Foundation of China(Grant 20181553015)Foundation of Shaanxi Educational Committee(Grant 2018BSHYDZZ03)+1 种基金the National Natural Science Foundation of China(Grant 11704314)China Postdoctoral Sci-ence Foundation(Grant 2018M631194).
文摘A composite absorber made of a polyurethane sponge and multi-layer micro-perforated plates is pre-sented in this study.Results from an acoustic impedance tube test show that the polyurethane sponge can exhibits higher low-frequency sound absorption in front of the micro-perforated plate,while sound absorption at medium and high-frequencies remains low.The physical mechanism behind this is that the micro-perforated plate increases the denpth cavity.If the polyurethane sponge is placed behind the micro-perforated plate,the amplitude of the original absorption peak will remain constant,but the ab-sorption peaks will shift to lower frequencies.The reason for this phenomenon is that porous materials with low flow resistance can be approximately equivalent to fluid,which not only does not affect the res-onance absorption coefficient of micro-perforated plate,but also makes the peaks move to low frequency.This study has the potential applications in the sound absorption design of composite structure.
文摘基于螺旋声学黑洞的波导吸振器(waveguide absorber,WGA)是为解决声学黑洞尖端厚度过薄、截止频率较高等问题而提出的新构型,目前其设计方法、耗能机理和减振应用效果有待进一步研究.研究基于几何声学理论和欧拉-伯努利梁理论,提出了WGA的设计方法,构建了WGA材料参数和几何参数选取的理论模型,通过数值仿真揭示了WGA设计参数对弯曲波波数虚部的影响规律,阐明了几何参数对于截止频率的调控机制,进一步从时域和频域的角度分析了WGA的弯曲波耗散机理.开展加筋板减振实验研究对比验证了设计方法的可靠性和WGA的减振效果.结果表明,研究提出的设计方法可使WGA在更大尖端厚度的条件下获得更低的反射系数和截止频率,在降低加工难度的条件下提高其减振效果和适用范围.安装WGA后的加筋板在10~1000 Hz内加速度级降低可达26 d B,减振效果显著优于等质量阻尼层.新设计的WGA具有易安装、减振频带宽、低频减振效果好和对结构固有振动特性影响小等优点.研究为WGA的设计及其在结构减振工程中的应用提供了指导.
