The Clinical Value of Accelerated Recovery Care in Pulmonary Rehabilitation of Perioperative Lung Cancer Patients

Aim: To study the clinical value of accelerated recovery care in pulmonary rehabilitation of perioperative lung cancer patients. Methods: 98 lung cancer patients undergoing surgery were admitted to our hospital from March 2020 to November 2021 and randomly divided into an observation group and an ACBT (Active Cycle of Breathing Technique) training group. Accelerated recovery care and routine care were respectively used in the perioperative period to compare the nursing effects of the two groups. Results: All perioperative indicators in the observation group were shorter than those in the ACBT training group. The pain scores at different time periods after surgery were lower in the observation group than in the ACBT training group (P 0.05). The improvement in the above indicators was higher in the observation group than in the ACBT training group after nursing care (P Conclusion: Accelerated recovery care during the perioperative period for lung cancer surgery patients showed significant effectiveness.

GPU-accelerated OCT imaging: Real-time data processing and artifact suppression for enhanced monitoring of 3D bioprinted tissues and vascular-like networks

Optical coherence tomography(OCT)imaging technology has significant advantages in in situ and noninvasive monitoring of biological tissues.However,it still faces the following challenges:including data processing speed,image quality,and improvements in three-dimensional(3D)visualization effects.OCT technology,especially functional imaging techniques like optical coherence tomography angiography(OCTA),requires a long acquisition time and a large data size.Despite the substantial increase in the acquisition speed of swept source optical coherence tomography(SS-OCT),it still poses significant challenges for data processing.Additionally,during in situ acquisition,image artifacts resulting from interface reflections or strong reflections from biological tissues and culturing containers present obstacles to data visualization and further analysis.Firstly,a customized frequency domainfilter with anti-banding suppression parameters was designed to suppress artifact noises.Then,this study proposed a graphics processing unit(GPU)-based real-time data processing pipeline for SS-OCT,achieving a measured line-process rate of 800 kHz for 3D fast and high-quality data visualization.Furthermore,a GPU-based realtime data processing for CC-OCTA was integrated to acquire dynamic information.Moreover,a vascular-like network chip was prepared using extrusion-based 3D printing and sacrificial materials,with sacrificial material being printed at the desired vascular network locations and then removed to form the vascular-like network.OCTA imaging technology was used to monitor the progression of sacrificial material removal and vascular-like network formation.Therefore,GPU-based OCT enables real-time processing and visualization with artifact suppression,making it particularly suitable for in situ noninvasive longitudinal monitoring of 3D bioprinting tissue and vascular-like networks in microfluidic chips.

Unsteady MHD Casson Nanofluid Flow Past an Exponentially Accelerated Vertical Plate:An Analytical Strategy

In this study,the characteristics of heat transfer on an unsteady magnetohydrodynamic(MHD)Casson nanofluid over an exponentially accelerated vertical porous plate with rotating effects were investigated.The flow was driven by the combined effects of the magnetic field,heat radiation,heat source/sink and chemical reaction.Copper oxide(CuO)and titanium oxide(TiO2)are acknowledged as nanoparticle materials.The nondimensional governing equations were subjected to the Laplace transformation technique to derive closed-form solutions.Graphical representations are provided to analyze how changes in physical parameters,such as the magnetic field,heat radiation,heat source/sink and chemical reaction,affect the velocity,temperature and concentration profiles.The computed values of skin friction,heat and mass transfer rates at the surface were tabulated for various sets of input parameters.It is perceived that there is a drop in temperature due to the rise in the heat source/sink and the Prandtl number.It should be noted that a boost in the thermal radiation parameter prompts an increase in temperature.An increase in the Prandtl number,heat source/sink parameter,time and a decrease in the thermal radiation parameter result in an increase in theNusselt number.The computed values of the skin friction,heat andmass transfer rates at the surface were tabulated for various values of the flow parameters.The present results were compared with those of previously published studies andwere found to be in excellent agreement.This research has practical applications in areas such as drug delivery,thermal medicine and cancer treatment.

Clinical Practice of Evidence-Based PDCA Cycle Management Model in Accelerated Recovery of Lung Cancer Patients

Objective: To explore the nursing effect of evidence-based PDCA cycle management mode in accelerated rehabilitation of patients undergoing thoracoscopic lung cancer radical surgery. Methods: 104 patients who underwent thoracoscopic lung cancer radical surgery in our hospital from June 2022 to February 2023 were randomly divided into control group and intervention group, with 52 cases in each group. The control group implemented evidence-based ERAS clinical pathway management, while the intervention group implemented evidence-based PDCA cycle quality management. The postoperative recovery of the two groups of patients was compared. Results: The postoperative recovery of the intervention group was significantly better than that of the control group. The first time to get out of bed, the first time to eat, the duration of chest drainage tube placement, and the length of hospital stay were significantly shorter than those of the control group. The incidence of postoperative chest complications and hospitalization costs were significantly lower than those of the control group, and patient satisfaction was significantly higher than that of the control group (P Conclusion: Evidence-based PDCA cycle quality management mode can effectively improve the implementation quality of accelerated rehabilitation nursing for patients undergoing thoracoscopic lung cancer radical surgery, and it is worthy of clinical promotion.

Clinical Study of Accelerated Rehabilitation Concept Combined with Tianji Robot-Assisted Surgery in Lumbar Degenerative Diseases

Objective: To compare the effectiveness and safety of two surgical methods for lumbar degenerative diseases;the combination of the concept of accelerated rehabilitation with the assistance of Tianji Robotics and the concept of accelerated rehabilitation combined with manual pedicle screw placement assisted by conventional C-arm fluoroscopy. Methods: A retrospective analysis was performed on 70 patients who received the concept of accelerated rehabilitation combined with spinal surgery for lumbar degenerative diseases in Baise People’s Hospital from January 2022 to January 2024. Among them, 35 patients in the robot group received accelerated rehabilitation concept combined with robot-assisted surgery;In the conventional C-arm group, 35 patients received the accelerated rehabilitation concept combined with manual pedicle screw placement assisted by conventional C-arm fluoroscopy. VAS score (preoperative/postoperative), ODI score (preoperative/postoperative), intraoperative bleeding volume, postoperative hospital stay, postoperative complications and the accuracy rate of screw placement were compared between the two groups. Result: There was no statistically significant difference in preoperative VAS scores between the robot group and the conventional C-arm group (6.45 ± 0.82 VS 6.63 ± 0.81, P = 0.6600). The postoperative VAS score of the robot group was better than that of the conventional C-arm group (1.69 ± 0.80 VS 2.45 ± 0.85, P = 0.0000*). There was no statistically significant difference in preoperative ODI scores between the robot group and the conventional C-arm group (32.11 ± 3.18 VS 31.66 ± 2.25, P = 0.4900). The postoperative ODI score of the robot group was better than that of the conventional C-arm group (22.68 ± 1.94 VS 24.57 ± 2.25, P = 0.0000*). The postoperative complications in the robot group were less than those in the conventional C-arm group (2.7778% VS 28.5724%, P = 0.0030*). The intraoperative bleeding in the robot group was lower than that in the conventional C-arm group (320.85 ± 276.28 VS 490.00 ± 395.34, P = 0.0420*). The postoperative hospital stay of the robot group was shorter than that of the conventional C-arm group (10.00 ± 9.32 VS 14.49 ± 7.55, P = 0.0300*). The screw placement inaccuracy score of the robot group was lower than that of the conventional C-arm group (0.17 ± 0.51 VS 1.45 ± 1.46, P = 0.0000*). Conclusion: The combination of the concept of accelerated rehabilitation and Tianji Orthopedic robot-assisted surgery is more effective and safer in posterior lumbar decompression and internal fixation surgery with a screw rod system, and is worthy of promotion and application.

Early changes in corneal densitometry after FS-LASIK combined with accelerated corneal cross-linking for correction of high myopia

AIM:To observe the effects of femtosecond laserassisted excimer laser in situ keratomileusis combined with accelerated corneal cross-linking(FS-LASIK Xtra)on corneal densitometry after correcting for high myopia.METHODS:In this prospectively study,130 patients underwent FS-LASIK or FS-LASIK Xtra for high myopia.Their right eyes were selected for inclusion in the study,of which 65 cases of 65 eyes in the FS-LASIK group,65 patients with 65 eyes in the FS-LASIK Xtra group.Patients were evaluated for corneal densitometry at 1,3,and 6mo postoperatively using Pentacam Scheimpflug imaging.RESULTS:Preoperative differences in corneal densitometry between the FS-LASIK and FS-LASIK Xtra groups in different ranges were not statistically significant(P>0.05).Layer-by-layer analysis revealed statistically significant differences in the anterior(120μm),central,and total layer corneal densitometry between the FS-LASIK and FS-LASIK Xtra groups at 1 and 3mo postoperatively(all P<0.05),the FS-LASIK Xtra group is higher than that of the FS-LASIK group.Analysis of different diameter ranges showed statistically significant differences between the FS-LASIK group and the FS-LASIK Xtra group at 1mo postoperatively in the ranges of 0–2,2–6,and 6–10 mm(both P<0.05);At 3mo postoperatively,the FS-LASIK Xtra group is higher than that of the FS-LASIK group in the ranges of 0–2 and 2–6 mm(P<0.05).At 6mo postoperatively,there were no statistically significant differences in corneal densitometry between the FS-LASIK group and the FS-LASIK Xtra group in different diameter ranges(all P>0.05).CONCLUSION:There is an increase in internal corneal densitometry during the early postoperative period after FS-LASIK Xtra for correction of high myopia.However,the densitometry values decreased to the level of conventional FS-LASIK at 6mo after surgery,with the most significant changes observed in the superficial central zone.

Accelerated Particle Swarm Optimization Algorithm for Efficient Cluster Head Selection in WSN

Numerous wireless networks have emerged that can be used for short communication ranges where the infrastructure-based networks may fail because of their installation and cost.One of them is a sensor network with embedded sensors working as the primary nodes,termed Wireless Sensor Networks(WSNs),in which numerous sensors are connected to at least one Base Station(BS).These sensors gather information from the environment and transmit it to a BS or gathering location.WSNs have several challenges,including throughput,energy usage,and network lifetime concerns.Different strategies have been applied to get over these restrictions.Clustering may,therefore,be thought of as the best way to solve such issues.Consequently,it is crucial to analyze effective Cluster Head(CH)selection to maximize efficiency throughput,extend the network lifetime,and minimize energy consumption.This paper proposed an Accelerated Particle Swarm Optimization(APSO)algorithm based on the Low Energy Adaptive Clustering Hierarchy(LEACH),Neighboring Based Energy Efficient Routing(NBEER),Cooperative Energy Efficient Routing(CEER),and Cooperative Relay Neighboring Based Energy Efficient Routing(CR-NBEER)techniques.With the help of APSO in the implementation of the WSN,the main methodology of this article has taken place.The simulation findings in this study demonstrated that the suggested approach uses less energy,with respective energy consumption ranges of 0.1441 to 0.013 for 5 CH,1.003 to 0.0521 for 10 CH,and 0.1734 to 0.0911 for 15 CH.The sending packets ratio was also raised for all three CH selection scenarios,increasing from 659 to 1730.The number of dead nodes likewise dropped for the given combination,falling between 71 and 66.The network lifetime was deemed to have risen based on the results found.A hybrid with a few valuable parameters can further improve the suggested APSO-based protocol.Similar to underwater,WSN can make use of the proposed protocol.The overall results have been evaluated and compared with the existing approaches of sensor networks.

Accelerated Primal-Dual Projection Neurodynamic Approach With Time Scaling for Linear and Set Constrained Convex Optimization Problems

The Nesterov accelerated dynamical approach serves as an essential tool for addressing convex optimization problems with accelerated convergence rates.Most previous studies in this field have primarily concentrated on unconstrained smooth con-vex optimization problems.In this paper,on the basis of primal-dual dynamical approach,Nesterov accelerated dynamical approach,projection operator and directional gradient,we present two accelerated primal-dual projection neurodynamic approaches with time scaling to address convex optimization problems with smooth and nonsmooth objective functions subject to linear and set constraints,which consist of a second-order ODE(ordinary differential equation)or differential conclusion system for the primal variables and a first-order ODE for the dual vari-ables.By satisfying specific conditions for time scaling,we demonstrate that the proposed approaches have a faster conver-gence rate.This only requires assuming convexity of the objective function.We validate the effectiveness of our proposed two accel-erated primal-dual projection neurodynamic approaches through numerical experiments.

Almost Sure Convergence of Proximal Stochastic Accelerated Gradient Methods

Proximal gradient descent and its accelerated version are resultful methods for solving the sum of smooth and non-smooth problems. When the smooth function can be represented as a sum of multiple functions, the stochastic proximal gradient method performs well. However, research on its accelerated version remains unclear. This paper proposes a proximal stochastic accelerated gradient (PSAG) method to address problems involving a combination of smooth and non-smooth components, where the smooth part corresponds to the average of multiple block sums. Simultaneously, most of convergence analyses hold in expectation. To this end, under some mind conditions, we present an almost sure convergence of unbiased gradient estimation in the non-smooth setting. Moreover, we establish that the minimum of the squared gradient mapping norm arbitrarily converges to zero with probability one.

The Accelerated Expansion of the Universe in the Light of the Maximum Ordinality Principle

The main aim of the paper is to present (and at the same time offer) a differ-ent perspective for the analysis of the accelerated expansion of the Universe. A perspective that can surely be considered as being “in parallel” to the tradition-al ones, such as those based, for example, on the hypotheses of “Dark Matter” and “Dark Energy”, or better as a “com-possible” perspective, because it is not understood as being “exclusive”. In fact, it is an approach that, when con-firmed by experimental results, always keeps its validity from an “operative” point of view. This is because, in analogy to the traditional perspectives, on the basis of Popper’s Falsification Principle the corresponding “Generative” Logic on which it is based has not the property of the perfect induction. The basic difference then only consists in the fact that the Evolution of the Universe is now modeled by considering the Universe as a Self-Organizing System, which is thus analyzed in the light of the Maximum Ordinality Principle.

Designing Adaptive Multiple Dependent State Sampling Plan for Accelerated Life Tests

A novel adaptive multiple dependent state sampling plan(AMDSSP)was designed to inspect products from a continuous manufacturing process under the accelerated life test(ALT)using both double sampling plan(DSP)and multiple dependent state sampling plan(MDSSP)concepts.Under accelerated conditions,the lifetime of a product follows the Weibull distribution with a known shape parameter,while the scale parameter can be determined using the acceleration factor(AF).The Arrhenius model is used to estimate AF when the damaging process is temperature-sensitive.An economic design of the proposed sampling plan was also considered for the ALT.A genetic algorithm with nonlinear optimization was used to estimate optimal plan parameters to minimize the average sample number(ASN)and total cost of inspection(TC)under both producer’s and consumer’s risks.Numerical results are presented to support the AMDSSP for the ALT,while performance comparisons between the AMDSSP,the MDSSP and a single sampling plan(SSP)for the ALT are discussed.Results indicated that the AMDSSP was more flexible and efficient for ASN and TC than the MDSSP and SSP plans under accelerated conditions.The AMDSSP also had a higher operating characteristic(OC)curve than both the existing sampling plans.Two real datasets of electronic devices for the ALT at high temperatures demonstrated the practicality and usefulness of the proposed sampling plan.

Quality Improvement of Recycled Concrete Aggregate by Accelerated Carbonation under Different Pressure

Due to the presence of old mortar (OM) and interfacial transition zone (ITZ),recycled concrete aggregate (RCA) is inferior to natural aggregate (NA).The purpose of this paper was to study the effect of accelerated carbonation on the macro-properties and micro-properties of RCA under different pressure(0.05,0.15,0.30 MPa).The macro-property tests included colour change,apparent density,water absorption,and crushing value of RCA.The micro-property tests included scanning electron microscopy (SEM),X-ray diffraction (XRD),thermogravimetry-differential scanning calorimetry (TG-DSC),and Vickers micro-hardness(VMH).The results showed that the change trends of apparent density,water absorption,and crushing value of RCA displayed exponential relationships as pressure increasing,with the optimum pressure of 0.30 MPa.SEM images indicated that the calcite caused by the hydration products in RCA and the Ca(OH)_(2) derived from saturated lime water improved the properties of RCA;as the apparent density increased,the water absorption and crushing value decreased.The results of XRD and TG-DSC indicated that,as the pressure increased,the masses of Ca(OH)_(2) in carbonated RCA gradually decreased,while those of CaCO_(3) gradually increased,which demonstrated that the carbonation degree gradually increased.Besides,ITZ-2 was the weakest phase in RCA,but its improvement degree of VMH by accelerated carbonation was higher than that of OM.However,RCA was not completely carbonated,but only carbonated in a certain depth after 24 h accelerated carbonation.

Molecular insight into the GaP(110)-water interface using machine learning accelerated molecular dynamics

GaP has been shown to be a promising photoelectrocatalyst for selective CO_(2)reduction to methanol.Due to the relevance of the interface structure to important processes such as electron/proton transfer,a detailed understanding of the GaP(110)-water interfacial structure is of great importance.Ab initio molecular dynamics(AIMD)can be used for obtaining the microscopic information of the interfacial structure.However,the GaP(110)-water interface cannot converge to an equilibrated structure at the time scale of the AIMD simulation.In this work,we perform the machine learning accelerated molecular dynamics(MLMD)to overcome the difficulty of insufficient sampling by AIMD.With the help of MLMD,we unravel the microscopic information of the structure of the GaP(110)-water interface,and obtain a deeper understanding of the mechanisms of proton transfer at the GaP(110)-water interface,which will pave the way for gaining valuable insights into photoelectrocatalytic mechanisms and improving the performance of photoelectrochemical cells.

The acceleration of a high-charge electron bunch to 10 GeV in a 10-cm nanoparticle-assisted wakefield accelerator

An intense laser pulse focused onto a plasma can excite nonlinear plasma waves.Under appropriate conditions,electrons from the background plasma are trapped in the plasma wave and accelerated to ultra-relativistic velocities.This scheme is called a laser wakefield accelerator.In this work,we present results from a laser wakefield acceleration experiment using a petawatt-class laser to excite the wakefields as well as nanoparticles to assist the injection of electrons into the accelerating phase of the wakefields.We find that a 10-cm-long,nanoparticle-assisted laser wakefield accelerator can generate 340 pC,10±1.86 GeV electron bunches with a 3.4 GeV rms convolved energy spread and a 0.9 mrad rms divergence.It can also produce bunches with lower energies in the 4–6 GeV range.

A Rare Entity of Accelerated Chronic Lymphocytic Leukemia: A Report of Two Cases and Review of Literature

Background: Accelerated-chronic lymphocytic leukemia (A-CLL) is a rare disease entity as it represents less than 1% of all reported cases of chronic lymphoid leukemia (CLL). Moreover, it is most likely an under diagnosed entity due to its rarity and the non-standardized practice of lymph node biopsy in CLL. Purpose: The aims of our work are to establish the diagnosis of A-CLL and to study the prognosis and treatment of this rare entity. Method: here, we report the clinical presentation and the follow up of two cases of A-CLL. Results: Distinguishing Richter transformation (RT) from A-CLL is important as it may result in a major change in disease management. The prognosis of A-CLL is intermediate between CLL and RT. The prognosis is mainly poor due to a predominance of poor prognostic markers including an increasing number of p53-positive cases. Conclusion: To this date, no prospective study has been led to define the best treatment for A-CLL. The shorter survival of A-CLL when compared to typical CLL implies the need of a more aggressive treatment.

Exhaustive review of acceleration strategies for Monte Carlo simulations in photon transit

Monte Carlo simulation techniques have become the quintessence and a pivotal nexus of inquiry in the realm of simulating photon movement within biological fabrics.Through the stochastic sampling of tissue archetypes delineated by explicit optical characteristics,Monte Carlo simulations possess the theoretical capacity to render unparalleled accuracy in the depiction of exceedingly intricate phenomena.Nonetheless,the quintessential challenge associated with Monte Carlo simulation methodologies resides in their extended computational duration,which significantly impedes the refinement of their precision.Consequently,this discourse is specifically dedicated to exploring innovations in strategies and technologies aimed at expediting Monte Carlo simulations.It delves into the foundational concepts of various acceleration tactics,evaluates these strategies concerning their speed,accuracy,and practicality,and amalgamates a comprehensive overview and critique of acceleration methodologies for Monte Carlo simulations.Ultimately,the discourse envisages prospective trajectories for the employment of Monte Carlo techniques within the domain of tissue optics.

Stepped-up development of accelerator mass spectrometry method for the detection of ^(60)Fe with the HI-13 tandem accelerator

The Moon provides a unique environment for investigating nearby astrophysical events such as supernovae.Lunar samples retain valuable information from these events,via detectable long-lived“fingerprint”radionuclides such as^(60)Fe.In this work,we stepped up the development of an accelerator mass spectrometry(AMS)method for detecting^(60)Fe using the HI-13tandem accelerator at the China Institute of Atomic Energy(CIAE).Since interferences could not be sufficiently removed solely with the existing magnetic systems of the tandem accelerator and the following Q3D magnetic spectrograph,a Wien filter with a maximum voltage of±60 kV and a maximum magnetic field of 0.3 T was installed after the accelerator magnetic systems to lower the detection background for the low abundance nuclide^(60)Fe.A 1μm thick Si_(3)N_(4) foil was installed in front of the Q3D as an energy degrader.For particle detection,a multi-anode gas ionization chamber was mounted at the center of the focal plane of the spectrograph.Finally,an^(60)Fe sample with an abundance of 1.125×10^(-10)was used to test the new AMS system.These results indicate that^(60)Fe can be clearly distinguished from the isobar^(60)Ni.The sensitivity was assessed to be better than 4.3×10^(-14)based on blank sample measurements lasting 5.8 h,and the sensitivity could,in principle,be expected to be approximately 2.5×10^(-15)when the data were accumulated for 100 h,which is feasible for future lunar sample measurements because the main contaminants were sufficiently separated.

A study of grid failure mode drivers and methods for accelerated life testing of a 30cm diameter ion thruster

In view of the high cost caused by the 1:1 lifetime verification test of ion thrusters,the lifetime acceleration test should be considered.This work uses the PIC-MCC(Particle-in-Cell MonteCarlo Collision)method to analyze the five failure factors that lead to the failure of the accelerator grid of a 30 cm diameter ion thruster under the working mode of 5 k W.Meanwhile,the acceleration stress levels corresponding to different failure factors are obtained.The results show that background pressure has the highest stress level on the grid's erosion.The accelerator grid aperture's mass sputtering rate under the rated vacuum degree(1×10^(-4)Pa)of 5 k W work mode is 8.78 times that of the baseline vacuum degree(1×10^(-6)Pa),and the mass sputtering rate under worse vacuum degree(5×10^(-3)Pa)is 5.08 times that of 1×10^(-4)Pa.Under the influence of the other four failure factors,namely,the voltage of the accelerator grid,upstream plasma density,the screen grid voltage and mass utilization efficiency,the mass sputtering rates of the accelerator grid hole are 2.32,2.67,1.98 and 2.51 times those of the accelerator grid hole under baseline condition,respectively.The ion sputtering results of two 30 cm diameter ion thrusters(both installed with new grids assembly)after working for 1000 h show that the mass sputtering rate of the accelerator grid hole under vacuum conditions of 5×10^(-3)Pa is 4.54 times that under the condition of 1×10^(-4)Pa,and the comparison error between simulation results and test results of acceleration stress is about 10%.In the subsequent ion thruster lifetime verification,the working vacuum degree can be adjusted according to the acceleration stress level of background pressure,so as to shorten the test time and reduce the test cost.

The Accelerated Expansion of the Universe

We use experimental data from Distant Type 1a Supernovae to calculate the Observed Magnitude (m - M) which is the Apparent Magnitude (m) minus the Absolute Magnitude (M) for different values of the Redshift z which gives us the Distance Modulus. Then, we calculate the average velocity and average acceleration for different z values and plot them as a function of time. The expansion of the space of our 3-D Universe is exponential and it will end with a Big Bang as four 3-D Universes of which we are one will come together to form one 4-D expanding spatial Universe.

A Novel Process of CO_(2) Reduction and CO_(2) Sequestration Through an Innovative Accelerated Carbonation Technique

The efiect of an innovative accelerated carbonation curing technique was evaluated on concrete containing natural zeolite powder and fine aggregate as partial replacement to alleviate the CO_(2) emission up to a certain extent from the concrete production industry and improve sequestration of CO_(2) into the concrete matrix in a stable form.An accelerated carbonation curing was accomplished by subjecting the concrete specimens to 0.5 and 0.75 M concentrations of sodium bicarbonate(NaHCO_(3)) solutions up to a curing age of 180 days after the initial 28 days of normal water curing.Tests for carbonation depth,pH value,compressive strength,calcium carbonate(CaCO_(3))content,X-ray difiraction,and thermogravimetric(TGA)analyses and Fourier transform infrared spectroscopy(FTIR)were performed to measure the extent of carbonation.The obtained results showed an increment in average compressive strength for the zeolite concrete(ZLC)mixes exposed to accelerated carbonation curing.The ZLC mixes exposed to increasing NaHCO_(3) solution concentration and exposure period exhibited greater carbonation depth and decreased pH at each depth interval indicating higher CO_(2) sequestration within the concrete matrix.The results obtained from the microstructural analysis(XRD,TGA,and FTIR)and CaCO_(3) content measurements confirm that the higher amount of CaCO_(3) formation provides a clear indication of the carbonation enhancement and CO_(2) sequestration within the concrete matrix and in turn contributing to the global warming reduction.