Acceleration Factor Harmonious Particle Swarm Optimizer

A Particle Swarm Optimizer （PSO） exhibits good performance for optimization problems, although it cannot guarantee convergence to a global, or even local minimum. However, there are some adjustable parameters, and restrictive conditions, which can affect the performance of the algorithm. In this paper, the sufficient conditions for the asymptotic stability of an acceleration factor and inertia weight are deduced, the value of the inertia weight w is enhanced to （ 1, 1）. Furthermore a new adaptive PSO algorithm - Acceleration Factor Harmonious PSO （AFHPSO） is proposed, and is proved to be a global search algorithm. AFHPSO is used for the parameter design of a fuzzy controller for a linear motor driving servo system. The performance of the nonlinear model for the servo system demonstrates the effectiveness of the optimized fuzzy controller and AFHPSO.

Hyperhomocysteinemia: Risk Factors and Faster Onset of Degenerative Complications of Type 2 Diabetes in Brazzaville

Background: Type 2 diabetes (T2D) remains a major global public health problem. This complex metabolic disorder can lead to various complications, including cardiovascular diseases (leading cause of death) in T2D. Among the biochemical markers associated with increased risk for cardiovascular disease, homocysteine is currently one of the predictive markers under evaluation. We investigate the link between hyperhomocysteinemia and diabetes complications in DT2 population in Brazzaville. Methodology: We conducted a cross-sectional analytical study, from October to December 2022. One hundred and fifty participants were included, 100 patients T2D (34 with complications, 33 with comorbidities, 33 without), and 50 patients controls. Sociodemographic and clinical characteristics were collected. Homocysteine (Hcy) serum levels were measured using Sandwich ELISA method. Results: Study population was composed of 50% males and 50% females with sex ratio of 1;mean age was 52.2 ± 10.8 years (30 - 83). The prevalence of hyperhomocysteinemia (HHcy) was 36% (20% moderate Hcy, 15% intermediate and 1% severe). Mean Hcy concentration was 31.9 μmol/l (18 - 103). Age, gender and physical inactivity were strongly correlated to Hcy (OR of 3.5;9.4 and 3 respectively). Multivariate analysis showed that HHcy was a risk accelerator for degenerative complications (stroke: OR = 6.2;ischemic heart disease: 4.9;neuropathy: 9.2;retinopathy: 4.5 and peripheral arterial disease: 4.9). Conclusion: These findings suggest that hyperhomocysteinemia can be considered as a predictive marker to be taken into account in targeting cardiovascular risk in Congolese subjects with T2D.

Designing Adaptive Multiple Dependent State Sampling Plan for Accelerated Life Tests

A novel adaptive multiple dependent state sampling plan(AMDSSP)was designed to inspect products from a continuous manufacturing process under the accelerated life test(ALT)using both double sampling plan(DSP)and multiple dependent state sampling plan(MDSSP)concepts.Under accelerated conditions,the lifetime of a product follows the Weibull distribution with a known shape parameter,while the scale parameter can be determined using the acceleration factor(AF).The Arrhenius model is used to estimate AF when the damaging process is temperature-sensitive.An economic design of the proposed sampling plan was also considered for the ALT.A genetic algorithm with nonlinear optimization was used to estimate optimal plan parameters to minimize the average sample number(ASN)and total cost of inspection(TC)under both producer’s and consumer’s risks.Numerical results are presented to support the AMDSSP for the ALT,while performance comparisons between the AMDSSP,the MDSSP and a single sampling plan(SSP)for the ALT are discussed.Results indicated that the AMDSSP was more flexible and efficient for ASN and TC than the MDSSP and SSP plans under accelerated conditions.The AMDSSP also had a higher operating characteristic(OC)curve than both the existing sampling plans.Two real datasets of electronic devices for the ALT at high temperatures demonstrated the practicality and usefulness of the proposed sampling plan.

An Experimental Study on Constant Current Load Test of Reinforced Concrete based on 3D Paraffin Isolation

Aiming at the complex corrosion degradation factors of reinforced concrete and clearing the deterioration mechanism in the constant stress state,a new type of constant current accelerated corrosion method in the saline soil environment was developed.The three-dimensional paraffin isolation specimens and the three-dimensional penetration specimens were taken as the research objects,and the Cl−content and AC impedance Bode diagram were measured.The macro morphology and micro analysis were also used to evaluate the corrosion degradation laws of the two groups of specimens.A constant current three-factor system accelerated model was established for the current acceleration factor,chloride ion,and sulfate ion acceleration factor.The experimental results show that,in the constant stress test of the saline soil environmental conditions,the paraffin isolation layer can effectively isolate corrosive chloride ions,which is a brand-new research method of single factor variable control in the constant stress test.According to the basic corrosion data,the law of constant current acceleration test is summarized and divided into five corrosion degradation stages,and each stage has significant changes in the accelerated corrosion efficiency.The corrosion degradation of a constant stress test is the combined effect of constant current,positive and negative penetration of chloride ions and sulfate ions.

Stability analysis of particle swarm optimization without Lipschitz constraint

There are some adjustable parameters which directly influence the performance and stability of Particle Swarm Optimization algorithm. In this paper, stabilities of PSO with constant parameters and time-varying parameters are analyzed without Lipschitz constraint. Necessary and sufficient stability conditions for acceleration factor P and inertia weight w are presented. Experiments on benchmark functions show the good performance of PSO satisfying the stability condition, even without Lipschitz constraint. And the inertia weight ω value is enhanced to (-1,1). Keywords Lipschitz constraint - Time-varying discrete system - Adaptive acceleration factor - Stability

QUICK ASSESSMENT METHODOLOGY FOR RELIABILITY OF SOLDER JOINTS IN BALL GRID ARRAY(BGA)ASSEMBLY——PART Ⅱ:RELIABILITY EXPERIMENT AND NUMERICAL SIMULATION

In the present study,a facility,i.e.,a mechanical deflection system (MDS),was established and applied to assess the long-term reliability of the solder joints in plastic ball grid array (BGA) assembly.It was found that the MDS not only quickly assesses the long-term reliability of solder joints within days,but can also mimic similar failure mechanisms in accelerated thermal cycling (ATC) tests. Based on the MDS and ATC reliability experiments,the acceleration factors (AF) were obtained for different reliability testing conditions.Furthermore,by using the creep constitutive relation and fatigue life model developed in part I,a numerical approach was established for the purpose of virtual life prediction of solder joints. The simulation results were found to be in good agreement with the test results from the MDS.As a result,a new reliability assessment methodology was established as an alternative to ATC for the evaluation of long-term reliability of plastic BGA assembly.

Model Associated with the Study of the Degradation Based on the Accelerated Test: A Literature Review

Most manufacturers of solar modules guarantee the minimum performance of their modules for 20 to 25 years, and 30-year warranties have been introduced. The warranty typically guarantees that the modules will perform to at least 90% capacity in the first 10 years and to at least 80% in the following 10 - 15 years. Early degradation resulting from design flaws, materials or processing issues is often apparent from startup to the first few years in service. Importantly, many module failures and performance losses are the result of gradual accumulated damage resulting from long-term outdoor exposure in harsh environments, referred. Many of these processes occur on relatively long time scales and the various degradation processes may be chemical, electrical, thermal or mechanical in nature. These are either initiated or accelerated by the combined stresses of the service environment, in particular solar radiation, temperature and moisture, and other stresses such as salt air, wind and snow. Accelerated Life Testing (ALT) test methodology is normally predicated on first being able to reproduce a specific degradation or failure mode without altering it (correlation);and, second, to produce that result in less than real-time acceleration. Degradation and failure may result when an applied stress exceeds material or product strength. This may be a one-time catastrophic event, the result of cyclic fatigue, or a gradual decline in requisite properties due to ageing mechanisms. Engineers in the manufacturing industries have used accelerated test (AT) experiments for many decades. The purpose of AT experiments is to acquire reliability information quickly. Test units of a material, component, subsystem or entire systems are subjected to higher-than-usual levels of one or more accelerating variables such as temperature or stress. Then the AT results are used to predict life of the units at use conditions. The extrapolation is typically justified (correctly or incorrectly) on the basis of physically motivated models or a combination of empirical model fitting with a sufficient amount of previous experience in testing similar units. The need to extrapolate in both time and the accelerating variables generally necessitates the use of fully parametric models. Statisticians have made important contributions in the development of appropriate stochastic models for AT data [typically a distribution for the response and regression relationships between the parameters of this distribution and the accelerating variable(s)], statistical methods for AT planning (choice of accelerating variable levels and allocation of available test units to those levels) and methods of estimation of suitable reliability metrics. This paper provides a review of many of the AT models that have been used successfully in this area.

Improving the Reliability of a Domestic Refrigerator Compressor Subjected to Repetitive Loading

As a reliability quantitative specification, parametric accelerated life testing was used to assess the reliability of a newly designed compressor of a commercial refrigerator subjected to repetitive stresses. A generalized life-stress failure model and new sample size equation with a new load concept were derived starting with the basic refrigeration cycle. The sample size equation with the acceleration factor also enabled the parametric accelerated life testing to quickly evaluate the expected lifetime. The design of this testing should help an engineer uncover the design parameters affecting reliability during the design process of the compressor system. Consequently, it should help companies improve product reliability and avoid recalls due to the product failures in the field. A newly designed compressor in a commercial refrigerator was used as a test case.

Reliability Design of Ice-Maker System Subjected to Repetitive Loading

Parametric Accelerated Life Testing (ALT) was used to improve the reliability of ice-maker system with a fractured helix upper dispenser in field. By using bond graphs and state equations, a variety of mechanical loads in the assembly were analyzed. The acceleration factor was derived from a generalized life-stress failure model with a new load concept. To reproduce the failure modes and mechanisms causing the fracture, new sample size equation was derived. The sample size equation with the acceleration factor also enabled the parametric accelerated life testing to quickly reproduce early failure in field. Consequently, the failure modes and mechanisms found were identical with those of the failed sample. The design of this testing should help an engineer uncover the design parameters affecting the reliability of fractured helix upper dispenser in field. By eliminating the design flaws, gaps and weldline, the B1 life of the redesign of helix upper dispenser is now guaranteed to be over 10 years with a yearly failure rate of 0.1% that is the reliability quantitative test specifications (RQ).

An Energy Model of a Failure Mechanism and its Application

The energy expression is presented for a failure mechanism, and it is appliedin an Accelerated Life Test (ALT) and an Accelerated Reliability Growth Test (ARGT). The conditionsof the common failure mechanism are obtained. The essential relationship between the conditions andthe Accelerated Factor (A_f) is proposed by using the energy model.

Methods to determine stress profile in ALT based on theoretical life models

Abstract With the recent products being more reliable, engineers cannot obtain enough failure or degradation information through the design period and even the product lifetime, therefore, accel erated life test （ALT） ihas become the most popular way to quantify the life characteristics of prod ucts. Test design is the most essential topic, such as testing duration, stress profile, data inference, etc. In this paper, a method and procedure based on theoretical life models is proposed to determine the accelerated stress profile. Firstly, the method for theoretical life calculation is put forward based on the main failure mechanism analysis and the theoretical life models. Secondly, the method is pro vided to determine the accelerated stress profile, including the method to determine the accelerated stress types and the stress range on the basis of the main failure mechanism analysis, the method to determine the acceleration factor and the accelerated stress level based on life quantitative calcula tion models, and the collaborative analysis method of the accelerated test time while taking the mul tiple failure mechanisms into consideration. Lastly, the actuator is taken as an example to describe the procedure of the method and the engineering applicability and the validity are verified.

Acceptance sampling plan of accelerated life testing for lognormal distribution under time-censoring

Abstract Lognormal distribution is commonly used in engineering. It is also a life distribution of important research values. For long-life products follow this distribution, it is necessary to apply accelerated testing techniques to product demonstration. This paper describes the development of accelerated life testing sampling plans （ALSPs） for lognormal distribution under time-censoring conditions. ALSPs take both producer and consumer risks into account, and they can be designed to work whether acceleration factor （AF） is known or unknown. When AF is known, lift testing is assumed to be conducted under accelerated conditions with time-censoring. The producer and con- sumer risks are satisfied, and the size of test sample and the size of acceptance number arc opti- mized. Then sensitivity analyses are conducted. When AF is unknown, two or more predetermined levels of accelerated stress are used. The sample sizes and sample proportion allo- cated to each stress level are optimized. The acceptance constant that satisfies producer and consumer risk is obtdned by minimizing the generalized asymptotic variance of the test statistics. Finally, the properties of the two ALSPs （one for known-AF conditions and one for unknown AF conditions） are investigated to show that the proposed method is corrcct and usablc through numerical examples.

Exact Confidence Limits for the Parameter of an Exponential Distribution in the Accelerated Life Tests under Type-ⅠCensoring

Life data frequently arise in many reliability studies,such as accelerated life tests studies.This paper considers the part of life data where failure and censoring observations may exist.To develop statistical methods and theory for the analysis of these data,a new approach was proposed to obtain the exact lower and upper confidence limits for the mean life of the exponential distribution with Type-I censoring data.It is assumed that the acceleration factor is a random variable,and that the distribution of the acceleration factor is known from some empirical information or the meta analysis.A method for constructing the lower and upper confidence limits for the parameter based on an ordering relation among the sample space was proposed.Simulation studies and analyses of two examples suggest that the proposed method performed well.

A Multi-Level Selective Maintenance Strategy Combined to Data Mining Approach for Multi-Component System Subject to Propagated Failures

In several industrial fields like air transport,energy industry and military domain,maintenance actions are carried out during downtimes in order to maintain the reliability and availability of production system.In such a circumstance,selective maintenance strategy is considered the reliable solution for selecting the faulty components to achieve the next mission without stopping.In this paper,a novel multi-level decision making approach based on data mining techniques is investigated to determine an optimal selective maintenance scheduling.At the first-level,the age acceleration factor and its impact on the component nominal age are used to establish the local failures.This first decision making employed K-means clustering algorithm that exploited the historical maintenance actions.Based on the first-level intervention plan,the remaining-levels identify the stochastic dependence among components by relying upon Apriori association rules algorithm,which allows to discover of the failure occurrence order.In addition,at each decision making level,an optimization model combined to a set of exclusion rules are called to supply the optimal selective maintenance plan within a reasonable time,minimizing the total maintenance cost under a required reliability threshold.To illustrate the robustness of the proposed strategy,numerical examples and a FMS real study case have been solved.