Jet formation and penetration performance of a double-layer charge liner with chemically-deposited tungsten as the inner liner

This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double-layer charge liners were fabricated by using CVD to deposit tungsten layers on the inner surfaces of pure T2 copper liners.The microstructures of the tungsten layers were analyzed using a scanning electron microscope(SEM).The feasibility analysis was carried out by pulsed X-rays,slug-retrieval test and static penetration tests.The shaped charge jet forming and penetration law of inner tungsten-coated double-layer liner were studied by numerical simulation method.The results showed that the double-layer liners could form well-shaped jets.The errors between the X-ray test results and the numerical results were within 11.07%.A slug-retrieval test was found that the retrieved slug was similar to a numerically simulated slug.Compared with the traditional pure copper shaped charge jet,the penetration depth of the double-layer shaped charge liner increased by 11.4% and>10.8% respectively.In summary,the test results are good,and the numerical simulation is in good agreement with the test,which verified the feasibility of using the CVD method to fabricate double-layer charge liners with a high-density and high-strength refractory metal as the inner liner.

Integrated design and control technology of liner completion and drilling for horizontal wells

Aiming at the problems of large load of rotation drive system,low efficiency of torque transmission and high cost for operation and maintenance of liner steering drilling system for the horizontal well,a new method of liner differential rotary drilling with double tubular strings in the horizontal well is proposed.The technical principle of this method is revealed,supporting tools such as the differential rotation transducer,composite rotary steering system and the hanger are designed,and technological process is optimized.A tool face control technique of steering drilling assembly is proposed and the calculation model of extension limit of liner differential rotary drilling with double tubular strings in horizontal well is established.These results show that the liner differential rotary drilling with double tubular strings is equipped with measurement while drilling(MWD)and positive displacement motor(PDM),and directional drilling of horizontal well is realized by adjusting rotary speed of drill pipe to control the tool face of PDM.Based on the engineering case of deep coalbed methane horizontal well in the eastern margin of Ordos Basin,the extension limit of horizontal drilling with double tubular strings is calculated.Compared with the conventional liner drilling method,the liner differential rotary drilling with double tubular strings increases the extension limit value of horizontal well significantly.The research findings provide useful reference for the integrated design and control of liner completion and drilling of horizontal wells.

Simulation Study of Solid Rocket Motor C/C Throat Liner Ablation Based on Two Regions

Based on the ablation micro-morphological characteristics, thermo-chemical ablation mechanism, and mechanical stripping mechanism, a dual-region solid rocket motor C/C throat liner ablation model and physical model are established. The ablation program was written and the experimental data of 70 lb BATES engine platform was used for model validation. The relative errors between the simulation calculation results and the experimental results were −6.83% - 10.20%. The ablation program was applied to study the effects of combustion chamber temperature, pressure, oxidation component concentration, throat particle concentration and particle scouring angle on the nozzle throat liner, which provides a reference for the design of the nozzle throat liner and the estimation of solid rocket motor ablation.

GO/HTPB composite liner for anti-migration of small molecules

Hydroxyl-terminated polybutadiene/toluene diisocyanate(HTPB/TDI)system is widely used in composite solid propellants.The migrations of plasticizers and water molecules from solid propellants and surrounding environment to the inhibitor have always been the important issues.This study focuses on the preparation,characterization and anti-migration behavior of graphene oxide(GO)/HTPB nanocomposite liner.The GO/HTPB(GH)composite liners affect the migration of small molecules through a tighter cross-linked structure and weakening function of small molecule adsorption.The anti-migration performance of the liner at different temperatures was analyzed,and the influence of the added amount of GO on the anti-migration performance and adhesion performance was also systematically studied.The overall performance of the liner is optimized when the amount of GO filler is 0.3 wt%.After adding 0.3 wt%GO,the concentration of dioctyl sebacate(DOS)migrated into the liner is decreased by 23.28%,and the concentration of water molecules is decreased by 51.89%,indicating that the introduction of GO can significantly improve the anti-migration performance of the liner.In addition,the bond strength is greatly increased from 0.25 MPa to 0.95 MPa,which meets the application requirements of the current propellant system.This research provides an important way for the preparation of structure-function synergistic anti-migration composite liners.

The Efect of Rich Synthetic Copper-rich Solution on Antiseepage Dense Pre-hydration Geosynthetic Clay Liner

Dense pre-hydrated geosynthetic clay liners(DPH GCLs)were manufactured as innovative materials accompanied by the advantage of lower hydraulic conductivity(k).The k of DPH GCLs permeated with de-ionized water(DIW)was 9.8×10^(−12) m/s.The effect of Cu^(2+)synthetic solution on DPH GCLs was discussed.Furthermore,the effect mechanism was studied on the basis of test technologies.A significant adverse impact on hydraulic performance of DPH GCLs is found when the concentration of Cu^(2+)is greater than 1 g/L.SEM,XRD,XRF,FTIR,and XPS analyses show that the effect of Cu^(2+)on DPH GCLs includes two steps.Firstly,Cu^(2+)interacts with hydrophobic organic matter(HOM),and the adhesion of bentonite is destroyed,and some holes appear.The Cu^(2+)contacts with bentonite directly,and Cu^(2+)interacts with bentonite through ion exchange.Passivated phenomenon occurs on the surface of the bentonite,and swelling ability of bentonite is reduced,which causes permeable DPH GCLs.

Structural design of the fluted shaped charge liner using multi-section optimization method

Spin effect of the small diameter shaped charge results in the centrifugal stress during the jet stretching process. Consequently, the jet scatters, which deceases the jet penetration capability. In the present study, a multi-section method was proposed to design the spin-compensation liner. The spincompensation rate(SCR) of the liner was defined as the specific angular velocity that a fluted liner can offset. Based on the plain stress theory, SPH numerical method was applied to study the converging process of the 2D fluted structure. The spin-compensation mechanism of the fluted structure was illustrated. Then, nine cross sections were chosen along the liner axis equidistantly. On each of the section, a 2D fluted structure was designed to offset a given initial angular velocity. After, the optimized fluted structures were integrated into a 3D fluted liner. Jet appearances of the normal liner and the fluted liners under different initial angular velocities were compared, which verifies the practicality of the multi-sectional method. The multi-section optimization method provides a new efficient method of designing the shaped charge liner for a specific usage.

Viscoelastic Burger’s model for tunnels supported with tangentially yielding liner

This study proposed an analytical model for the tunnel supported with a tangentially yielding liner in viscoelastic ground.The efficiency of the developed analytical model was verified by comparing the calculated results with associated numerical simulation results.Using the analytical model,a comprehensive parameter sensitivity analysis was performed to examine the effects of the rate of tunnel face advancement,concrete liner thickness,installation time of liner,and strength and thickness of yielding elements on the tunnel responses.The results highlight the significant benefit of the tangentially yielding liner to relieve overstress in the tunnel liner and improve the stability of the tunnel.The yield efficiency of the tangentially yielding liner depends highly on the yielding strength and deformable capacity of the yielding elements and less on the installation time.

Parameter Study on a Composite Sound-Absorbing Structure Liner in Elevator Shafts

With the growing global environmental awareness,the development of renewable and green materials has gained increased worldwide interest to substitute conventional materials and are favorable for sustainable economic development.This paper proposed a novel eco-friendly sound absorbing structure(NSAS)liner for noise reduction in elevator shafts.The base layer integrated with the shaft walls is a damping gypsum mortarboard,and a rock wool board and a perforated cement mortarboard are used to compose the NSAS.Based on the acoustic impedance theory of porous materials and perforated panels,the sound absorption theory of the NSAS was proposed;the parameter effects of the rock wool board(flow resistivity,porosity,structure factor)and perforated panel(perforated rates,thickness,density,perforated diameter)on NSAS absorption were discussed theoretically for absorption improvement,and experiments were also conducted.Numerical results showed that the perforation rate,the thickness of the perforated plate,and the porosity,flow resistance,and volume density of the rock wool board played a key issue in the absorption performances of the NSAS.Experiments verified the accuracy of the proposed theoretical model.Wideband sound absorption performance of the NSAS at frequencies between 500–1600 Hz was achieved in both numerical analysis and experiments,and the sound absorption coefficient was improved to 0.72 around 1000 Hz after parameter adjustments.The NSAS proposed in this paper can also be made of other renewable materials with preferable structure strength and still has the potential to broaden the absorption bandwidth.It can provide a reference for controlling the elevator shaft noise.

压气储能地下储气库衬砌裂缝分布特征及演化规律研究

地下储气库衬砌的主要作用是将内压传递给围岩,且同时作为柔性密封层的附着基层。高内压作用下衬砌开裂可导致密封层出现反射型裂缝,进而引起高压气体的泄漏。为深入认识地下储气库衬砌的开裂特征,开发了基于FLAC3D平台的衬砌裂缝分析程序,研究了衬砌配筋方式、配筋率、钢筋保护层厚度、围岩类别和温压循环荷载作用等因素对衬砌开裂演化特征的影响。研究成果表明:对衬砌采取合理的配筋方式和改善围岩质量的措施可有效控制衬砌裂缝的宽度;采用分区配筋的方式可有效控制圆形断面隧洞式储气库衬砌中的最大裂缝宽度,同时降低衬砌的配筋量。空气压力和温度同步变化引起的热力耦合效应还有助于减小衬砌中出现的裂缝宽度。

基于改进EEMD-MB1DCNN的船用柴油机缸套-活塞环故障诊断

针对船用中高速柴油机缸套-活塞环振动信号非线性非平稳性以及同类型不同损伤程度故障发生时振动信号时频域特征相似、故障难以识别等问题,利用振动信号辨识故障,提出一种基于改进集成经验模态分解方法和多模块一维卷积神经网络端到端缸套-活塞环故障诊断方法,通过设计固有模态分量IMF信息质量筛选准则对EEMD分解出的IMFs进行重新排序,获得包含更多凸显故障特征成分的重构信号,输入到上述神经网络模型,通过振动信号分析并与现有方法比较,评估所设计IMF信息质量筛选准则与所搭建模型的性能,试验结果显示该方法能准确、有效地识别缸套-活塞环故障类型。在判断该易损件同类型不同磨损程度故障诊断中有较高的准确率,能对故障状况进行有效的特征提取与故障分类。

过盈量对干式缸套变形规律的影响研究

以某干式缸套柴油机为原型,采用有限元仿真的方法,建立了机体、缸盖、缸垫、缸套、螺栓等组合的有限元模型,分别在预紧工况和热机耦合工况下对比研究了施加过盈量前后的气缸套变形规律。研究结果表明:在装配工况下,从缸套顶部至缸套底部,缸套的变形量都逐渐变小,施加了过盈量后的缸套综合变形增加了近两倍,综合变形量最大出现在第四缸上部的290°区域,变形量为19.4μm。在多个载荷的耦合作用下,不同缸爆发时的缸套变形趋势和单独施加螺栓预紧力的变形趋势几乎一致,从缸套顶部至底部,变形量逐渐较小,第二、三缸变形较小,第一、四缸靠近自由端两侧变形较大,最大变形出现的位置从顶部90°方向移动至0°方向附近,变形量为302.8μm。

非晶合金药型罩的射流仿真及结构设计

采用Ls-dyna软件中的光滑粒子流体动力学(SPH)方法对非晶合金药型罩的射流成形进行数值仿真,侵彻仿真用软件中的多物质ALE算法和流固耦合,并进行试验验证。结果表明:72°锥角非晶合金药型罩的射流形态、性能更好,射流为连续性非凝聚态,锥角为72°,壁厚为2.5 mm的非晶合金药型罩穿深约为铜药型罩的86%,孔径约为铜药型罩的1.46倍,仿真结果与试验结果误差小于10%。药型罩中部对非晶合金射流成形和性能影响最大。根据非晶合金射流特征设计了一种新型药型罩结构,其侵彻45#钢穿深比锥形非晶合金药型罩提高约12%,达到相同锥角的锥形铜药型罩的穿深,孔径比铜药型罩高约44%,为非晶合金药型罩结构设计提供参考。

药型罩形状对活性聚能侵彻体成型的影响

结合理论与数值模拟,对3种不同形状药型罩活性聚能侵彻体的成型行为开展了研究.数值模拟结果表明,在聚能效应下,球缺罩和大锥角圆锥罩形成尾部带有碎片云的类杆状活性聚能侵彻体,而小锥角圆锥罩则形成活性射流.相比于活性射流,类杆状活性聚能侵彻体速度较低,但凝聚性较好.进一步结合活性材料反应动力学方程,对活性聚能侵彻体成型激活反应行为进行分析.分析结果表明:活性射流激活区位于杵体外壁、射流头部和轴线附近;随炸高增加,激活区内活性材料反应不断加剧,特别是射流头部和轴线附近材料的反应,将导致活性射流膨胀发散,不利于侵彻;而类杆状活性聚能侵彻体激活区域主要集中在尾部碎片区和杆尾中心部位,化学反应对其影响相对较小.

锥形束CT评价人工耳蜗植入的电极深度和位置

目的分析人工耳蜗植入后电极植入深度、位置与耳蜗大小、盘旋方式的关系,探讨植入后电极深度的影响因素和电极移位的原因。方法选取植入CI24RE(CA)弯电极30例和SONATA ti100 Standard直电极人工耳蜗装置41例,利用锥形束CT测量术后电极植入长度、植入深度角、电极在耳蜗内的位置,分析上述指标与术前CT评估的耳蜗大小、倾斜角度的关系。结果①术后电极植入深度角和长度均存在较大的个体差异。直电极组平均植入深度角为702±53度,平均植入长度为30.02±1.29 mm;弯电极组平均植入深度角为441±45度,平均植入长度为18.4±1.0 mm,两组间差异有统计学意义(P<0.001)。②电极植入深度角与耳蜗底回的长径和宽径均呈负相关:直电极组r=-0.768(P<0.001)、r=-0.678(P<0.001),弯电极组r=-0.467(P=0.008)、r=-0.471(P=0.008)。电极植入长度与植入深度角呈正相关:直电极组r=0.578(P<0.001),弯电极组r=0.748(P<0.001)。③术后电极移位6例,均为弯电极且位于耳蜗180度位置。弯电极组中电极移位者与未移位者耳蜗底回倾斜角以及第一回和第二回之间的夹角差异有统计学意义(10.28度vs 8.75度,P=0.006;15.23度vs 14.00度,P=0.033)。结论人工耳蜗植入术后电极植入长度和深度角存在较大的个体差异,与耳蜗大小密切相关;耳蜗盘旋方式不同是引起电极移位的原因之一。

纤维缠绕塑料内胆表面处理装置的设计与分析

为提高目前塑料内胆的表面处理质量以及处理时间,节约时间和人工成本,本文针对纤维缠绕塑料内胆的表面处理设计了一套自动化的处理装置。它主要可以实现塑料内胆的自动夹持夹紧定位以及塑料内胆表面处理等功能。文中主要介绍了所设计的夹持传动装置以及等离子表面处理装置等相关结构,并在SolidWorks软件中对此套装置进行了总体设计与装配,在Workbench中对部分零部件进行了强度校核,分析Workbench中的相关结果。结果显示,该装置达到了相关力学要求且能够平稳传动,满足设计要求。

基于预补偿的缸孔型线优化设计及其密封特性研究

以某非道路高压共轨柴油机为研究对象,建立了螺栓–缸盖–缸垫–缸套–机体装配耦合模型,采用仿真分析与测试相结合的方式研究了工作状态下的缸套热机耦合失圆变形。基于缸套变形结果设计了锥形、瓶颈形、纺锤形、椭圆形、椭圆纺锤复合形5种具有不同型线特征的异形缸套预补偿方案,研究了不同异形缸套的热机耦合变形量、傅里叶变形幅值及其密封与摩擦性能。研究结果表明,在第三缸的101.8 mm截面处,椭圆形方案的最大径向变形量比原机缸套减小了15.42%;椭圆形缸套的窜气量与原机缸套相比减小了1.34%,其他方案的窜气量均比原机缸套大;与原机缸套相比,纺锤形缸套和椭圆纺锤复合形缸套的机油消耗量减小了21.36%。

内燃机缸套穴蚀预测与抑制研究综述

内燃机缸套的剧烈振动会引起冷却液空化并造成穴蚀。缸套穴蚀问题一直是影响内燃机寿命和可靠性的难题之一,随着内燃机高热效率和轻量化设计要求的不断提高,缸套穴蚀问题受到越来越多的关注。实现缸套穴蚀的早期预测与抑制对清洁高效内燃机提高运行可靠性、降低开发和维护成本具有重要意义。介绍了缸套穴蚀的产生机理,总结了缸套振动的求解方法,综述了柴油机缸套穴蚀的预测与抑制研究现状。在此基础上,分别从试验和模型2个方面总结了缸套穴蚀风险的评估方法及各类方法的局限性。介绍了现有的缸套穴蚀抑制技术。论述了目前缸套穴蚀研究中存在的主要问题与挑战,并展望了未来的研究方向。

考虑热障涂层及冷却结构影响的某F级燃气轮机火焰筒数值研究

以某F级燃气轮机燃烧室火焰筒为研究对象,考虑热障涂层及冷却结构对火焰筒气动传热影响,基于流热固耦合方法对额定工况下的火焰筒进行了内部流场、温度场和应力场分析,并将数值分析结果与火焰筒实际损伤情况进行对比。结果表明:数值分析结果的火焰筒高应力区域与火焰筒实际损伤区域基本吻合,采用流热固耦合方法可以预测火焰筒实际损伤情况;不同位置的热障涂层陶瓷层隔热效果相近;基体和热障涂层陶瓷层在冷却结构附近的区域均为高应力区域。

侵蚀性淋滤液作用下HPMC改性膨润土的防渗性能

使用羟丙基甲基纤维素(HPMC)对天然钠基膨润土进行改性,以提高其对侵蚀性淋滤液的防渗性能.开展渗透试验和膨胀指数试验,以5000mg/L的Cu SO_(4)和0.5mol/L的H_(2)SO_(4)模拟侵蚀性淋滤液,研究侵蚀性溶液对HPMC改性膨润土的渗透系数和膨胀指数的影响.渗透试验结果表明:CuSO_(4)溶液作用下,添加2%和5%的HPMC可使膨润土的渗透系数降低32.28%~77.40%;而H_(2)SO_(4)溶液作用下,添加2%和5%的HPMC可使膨润土的渗透系数降低73.42%~92.83%.膨胀指数试验结果显示,添加2%的HPMC无法提高膨润土在侵蚀溶液中的膨胀指数,但添加5%的HPMC可使膨润土在侵蚀性溶液中的膨胀指数增大2倍左右.HPMC改性可以显著增强膨润土对侵蚀性溶液的防渗性能.孔隙填充是膨润土防渗性能增强的主要机制.

水平井尾管完井与钻井一体化设计控制技术

针对水平井尾管导向钻井技术存在的钻机旋转系统负载大、地面扭矩传动效率低、使用与维护成本高等问题,提出了水平井双管柱尾管差速旋转钻进新方法,揭示了相应的技术原理,设计了双管柱差速旋转传动、复合旋转导向及悬挂器等井下专用工具,优化了相关工艺流程;提出了导向钻具组合工具面控制方法,建立了水平井双管柱尾管差速旋转钻进延伸极限计算模型。结果表明:水平井双管柱尾管差速旋转钻进技术配备常规随钻测量仪器和螺杆钻具,通过调节钻柱转速可以控制导向钻具组合的工具面,实现了水平井双管柱尾管差速旋转导向钻进;基于鄂尔多斯盆地东缘深部煤层气水平井工程案例计算水平井双管柱钻进延伸极限,与常规尾管钻井方式相比,采用双管柱尾管差速旋转钻进方式显著增大了水平井延伸极限,为水平井尾管完井与钻井一体化设计控制提供了参考。