Acid mine drainage activation mechanism on lime-depressed pyrite flotation from copper sulfide ore

The lime-depressed pyrite from Cu differential flotation tailings with acid mine drainage(AMD)as a natural activator was recovered.The effect of AMD on lime-depressed pyrite flotation was investigated by a series of laboratory flotation tests and surface analytical techniques.Flotation test results indicated that AMD could effectively activate the pyrite flotation with a sodium butyl xanthate(SBX)collector,and a high-quality sulfur concentrate was obtained.Pulp ion concentration analysis results indicated that AMD facilitated desorption of Ca^(2+)and adsorption of Cu^(2+)on the depressed-pyrite surface.Adsorption measurements and contact angle analysis results confirmed that adding AMD improved the adsorption amount of SBX collector on the pyrite surface and increased the contact angle by 31°.Results of Raman spectroscopy and X-ray photoelectron spectroscopy analysis indicated that AMD treatment promoted the formation of hydrophobic species(S^(0) hydrophobic entity and copper sulfides)and the removal of hydrophilic calcium and iron species on the pyrite surface,which reinforced the adsorption of collector.The findings of the present research provide important theoretical basis and technical support for a cleaner production of copper sulfide ores.

Human AKR1A1 involves in metabolic activation of carcinogenic aristolochic acidⅠ

OBJECTIVE To investigate whether aldo-keto reductases(AKRs)can act as a nitrore⁃ductase(NR)and bioactivate aristolochic acidⅠ(AA-Ⅰ)to produce AA-Ⅰ-DNA adducts.METHODS①Human-induced hepatocytes(hiHeps)and human bladder RT4 cells were used as tool cells and treated with AA-Ⅰ0,0.5,1.0 and 2μmol·L^(-1)for 24 h.Cell viability was detected using the CCK-8 method,and the half maximal inhibition concentration(IC_(50))was calculated using the CCK-8 method and the level of DNA adduct production was calculated.②hiHeps and RT4 cells were treated with AKR inhibitor luteotin(0,5,10 and 25μmol·L^(-1))+AA-Ⅰ0.2 and 1.0μmol·L^(-1)for 24 h,respectively,and the levels of DNA adducts were detected by a liquid chromatography-tandem mass spectrometer(LC-MS/MS).③hiHeps cells were incubated with 80 nmol·L^(-1)small interfering RNAs(si-AKRs)for 48 h and treated with AA-Ⅰ1.0μmol·L^(-1)for 24 h.Real-time qualitative PCR(RT-qPCR)method was used to detect the mRNA expression of AKRs gene and LC-MS/MS technology was used to investigate the effect of specific AKR gene knockdown on DNA adduct levels.④500 nmol·L^(-1)human AKR recombinant proteins AKR1A1 and AA-Ⅰwere incubated in vitro under anaerobic conditions and the formation of AA-Ⅰ-DNA adducts was detected.RESULTS①The IC_(50)of AA-Ⅰto hiHeps and RT4 cells was 1.9 and 0.42μmol·L^(-1),respec⁃tively.The level of DNA adduct production of the two cell lines was significantly different(P<0.01).②Luteolin≥5μmol·L^(-1)significantly inhibited the production of AA-Ⅰ-DNA adducts in both cells(P<0.05),and there was a concentration-dependent effect in hiHeps cells(P<0.01,R=0.84).③In the AKR family,the knockdown of AKR1A1 gene up to 80%inhibited the generation of AA-Ⅰ-DNA adducts by 30%-40%.④The AA-Ⅰ-DNA adducts were detected in the incubation of recombinant protein AKR1A1 and AA-Ⅰunder anaerobic conditions in vitro,approximately 1 adduct per 107 nucleotides.CONCLU⁃SION AKR1A1 is involved in AA-Ⅰbioactivation,providing a reference for elucidation of the carcino⁃genic mechanism of AA-Ⅰ.

Importance of V^(4)and optimal acid environment in the hydroxylation of inert benzene via activation of C_(sp2)-H bond

Hydroxylation of inert benzene through the activation of the C_(sp2)-H bond is a representative reaction about the transformation of C-H bonds to C-O bonds,which has far-reaching guiding significance but remains a challenging scientific problem.To overcome this problem,a series of VOx-Ga_(2)O_(3)/SiO_(2)-Al_(2)O_(3)were prepared to achieve an efficient and economical hydroxylation path of benzene to phenol.The results showed that the phenol yield was 72.89%(selectivity>98.1%)under the optimum conditions.The reason is that the C-H bond in the benzene ring is activated by heterolysis over a VOx-Ga_(2)O_(3)/SiO_(2)-Al_(2)O_(3)catalyst.Meanwhile,the introduction of aluminum(Al)and gallium(Ga)made a qualitative change in the catalyst,enhancing the electron motion and spin motion of vanadium species,resulting in the increase of V4^(+)/V5^(+)ratio.In addition,the catalyst can provide an optimal acidic environment and a threedimensional cross-linked surface structure that facilitates product diffusion.

Effect of root derived organic acids on the activation of nutrients in the rhizosphere soil

Four types of soils, including brown coniferous forest soil, dark brown soil, black soil, and black calic soil, sampled from three different places in northeast China were used in this test. The functions of two root-derived organic acids and water were simulated and compared in the activation of mineral nutrients from the rhizosphere soil. The results showed that the organic acids could activate the nutrients and the activated degree of the nutrient elements highly depended on the amount and types of the organic acid excreted and on the physiochemical and biochemical properties of the soil tested. The activation effect of the citric acid was obviously higher than that of malic acid in extracting Fe, Mn, Cu, and Zn for all the tested soil types. However, the activation efficiencies of P, K, Ca, and Mg extracting by the citric acid were not much higher, sometimes even lower, than those by malic acid. The solution concentration of all elements increased with increase of amount of the citric acid added.

Preparation of Ti-rich material from titanium slag by activation roasting followed by acid leaching

A method of activation roasting followed by acid leaching using titanium slag was introduced to prepare Ti-rich material. The effects of HaPO4 dosage, roasting temperature, and roasting time on TiO2 grade were investigated. A Ti-rich material containing 88.54% TiO2, 0.42% （CaO＋MgO） was obtained when finely ground titanium slag was roasted with 7.5% H3PO4 at 1000 ℃ for 2 h, followed by a two-stage leaching in boiling dilute sulfuric acid for 2 h. The XRD patterns show that the product is titanium dioxide with a rutile structure. Mechanism studies show that structures of anosovite solid solution and silicate minerals are destroyed in the roasting process. As a result, titanium components in titanium slag are transformed into TiO2 （futile） while impurities are transformed into acid-soluble phosphate and quartz.

Effects of mechanical activation and oxidation-reduction on hydrochloric acid leaching of Panxi ilmenite concentration

The effects of oxidation-reduction treatment and mechanical activation on the hydrochloric acid leaching performance of Panxi ilmenite concentration were investigated.The results show that both of oxidation-reduction treatment and mechanical activation significantly accelerate the extraction of Fe,Ca and Mg from Panxi ilmenite concentration;however,the CaO and MgO contents of the calcined residues obtained from oxidized-reduced ilmenite concentration are higher than the standard values required by chlorination process.The Ca and Mg in oxidized-reduced ilmenite concentration can be leached much faster after mechanical activation,yielding a synthetic rutile which meets the requirements of chlorination process containing 90.50% TiO2 and 1.37% total iron as well as combined CaO and MgO of 1.00%.The optimum oxidation and reduction conditions are as follows：oxidization at 900 ℃ in the presence of oxygen for 15 min and reduction at 750 ℃ by hydrogen for 30 min.

Optimization of an innovative approach involving mechanical activation and acid digestion for the extraction of lithium from lepidolite

The recovery of lithium from hard rock minerals has received increased attention given the high demand for this element. There- fore, this study optimized an innovative process, which does not require a high-temperature calcination step, for lithium extraction from le- pidolite. Mechanical activation and acid digestion were suggested as crucial process parameters, and experimental design and re- sponse-surface methodology were applied to model and optimize the proposed lithium extraction process. The promoting effect of amorphi- zation and the formation of lithium sulfate hydrate on lithium extraction yield were assessed. Several factor combinations led to extraction yields that exceeded 90%, indicating that the proposed process is an effective approach for lithium recovery.

Activation flotation and mechanism of lime-depressed pyrite with oxalic acid

Flotation tests, contact angle measurements, infrared spectrum analyses, X-ray analyses and computer simulation were carried out in order to study the activation mechanism of lime-depressed pyrite with oxalic acid. The results show that the oxalic acid effectively eliminated the hydrophilic calcium film from the surface of pyrite. Therefore, the efficiency of pyrite flotation was also activated. The results indicate that after reacting with hydrophobic insoluble remainders on the surface of pyrite, oxalic acid can pro- duce hydrophilic compounds, such as CaC03, Ca（OH）2 and Fe（OH）3. As a consequence, a flesh pyrite layer was exposed and its flotation activated.

Density Functional Theory Studies on the Mechanism of Activation Formic Acid Catalyzed by Transition Metal Oxide MoO

This paper systematically studies the reaction mechanisms of formic acid catalyzed by transition metal oxide MoO. Three different reaction pathways of Routes I, Ⅱ and Ⅲ were found through studying the reaction mechanism of transition metal oxide MoO catalyzing the formic acid. The transition metal oxide MoO interacts with the C=O double bond to form chiral chain compounds（Routes I and Ⅱ） and metallic compound MoOH2（Route Ⅲ）. In this paper, we have studied the mechanisms of two addition reaction pathways and hydrogen abstraction reaction pathway. Routes I and Ⅱ are both addition reactions, and their products are two different chiral compounds MoO3CH2, which are enantiomeric to each other. In Route Ⅲ, metal compounds MoOH2 and CO2 are obtained from the hydrogen abstraction reaction. Among them, the hydrogen abstraction reaction occurring in Route Ⅲ is more likely to occur than the others. By comparing the results of previous studies on the reaction of MxOy-＋ ROH（M= Mo,W; R = Me, Et）, we found that the hydrogen abstraction mechanism is completely different from the mechanism of oxygen-containing organic compound catalyzed by MxOy.

Study of Physical, Chemical and Morphological Alterations of Smectite Clay upon Activation and Functionalization via the Acid Treatment

The present study was carried out on the effect of acid leaching on the modification and structure alteration of montmorillonite. A nanostructured, activated material was prepared by selective leaching of pure smectite clay with different concentrations of sulfuric acid (1 - 10 N/L) at 85°C for 120 min using a solid/liquid ratio of 1:20 and a reflux system. The Fourier transform infrared (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-Ray diffraction (XRD) techniques were used for the characterization and study of the acid-treated montmorillonite clay. Chemical structure of specimens was distinguished by FTIR. The results showed that the formation of Si-OH bonds and leaching of Al3+ ions increased progressively with severity of the acid treatment. As the FTIR studies indicated, acid treatment led to the removal of the octahedral Al3+ cations and an increase in the Si-OH bonds. The morphological alteration of the untreated and treated montmorillonite was investigated by using TEM and SEM. X-ray fluorescence (XRF) analysis revealed a considerable decrease in the relative content of Al by increasing the acid strength. Moreover, the XRD results showed that the treatment using highly concentrated acid resulted in the formation of an amorphous silica phase.

Preparation of activated carbon from sunflower straw through H_(3)PO_(4) activation and its application for acid fuchsin dye adsorption

With the development circular economy, the use of agricultural waste to prepare biomass materials to remove pollutants has become a research hotspot. In this study, sunflower straw activated carbon (SSAC) was prepared by the one-step activation method, with sunflower straw (SS) used as the raw material and H3PO4 used as the activator. Four types of SSAC were prepared with impregnation ratios (weight of SS to weight of H3PO4) of 1:1, 1:2, 1:3, and 1:5, corresponding to SSAC1, SSAC2, SSAC3, and SSAC4, respectively. The adsorption process of acid fuchsin (AF) in water using the four types of SSAC was studied. The results showed that the impregnation ratio significantly affected the structure of the materials. The increase in the impregnation ratio increased the specific surface area and pore volume of SSAC and improved the adsorption capacity of AF. However, an impregnation ratio that was too large led to a decrease in specific surface area. SSAC3, with an impregnation ratio of 1:3, had the largest specific surface area (1 794.01 m2/g), and SSAC4, with an impregnation ratio of 1:5, exhibited the smallest microporosity (0.052 7 cm3/g) and the largest pore volume (2.549 cm3/g). The adsorption kinetics of AF using the four types of SSAC agreed with the quasi-second-order adsorption kinetic model. The Langmuir isotherm model was suitable to describe SSAC3 and SSAC4, and the Freundlich isotherm model was appropriate to describe SSAC1 and SSAC2. The result of thermodynamics showed that the adsorption process was spontaneous and endothermic. At 303 K, SSAC4 showed a removal rate of 97.73% for 200-mg/L AF with a maximum adsorption capacity of 2 763.36 mg/g, the highest among the four types of SSAC. This study showed that SAAC prepared by the H3PO4-based one-step activation method is a green and efficient carbon material and has significant application potential for the treatment of dye-containing wastewater.

A comparison study on structure-function relationship of polysaccharides obtained from sea buckthorn berries using different methods:antioxidant and bile acid-binding capacity

In this study,the structural characters,antioxidant activities and bile acid-binding ability of sea buckthorn polysaccharides(HRPs)obtained by the commonly used hot water(HRP-W),pressurized hot water(HRP-H),ultrasonic(HRP-U),acid(HRP-C)and alkali(HRP-A)assisted extraction methods were investigated.The results demonstrated that extraction methods had significant effects on extraction yield,monosaccharide composition,molecular weight,particle size,triple-helical structure,and surface morphology of HRPs except for the major linkage bands.Thermogravimetric analysis showed that HRP-U with filamentous reticular microstructure exhibited better thermal stability.The HRP-A with the lowest molecular weight and highest arabinose content possessed the best antioxidant activities.Moreover,the rheological analysis indicated that HRPs with higher galacturonic acid content and molecular weight showed higher viscosity and stronger crosslinking network(HRP-C,HRP-W and HRP-U),which exhibited stronger bile acid binding capacity.The present findings provide scientific evidence in the preparation technology of sea buckthorn polysaccharides with good antioxidant and bile acid binding capacity which are related to the structure affected by the extraction methods.

Effects of Citric Acid Concentration and Activation Temperature on the Synthesis of Carbon Nanotubes

A series of Ni-La-Mg catalyst samples were prepared by citric acid complex method, and carbon nanotubes were synthesized by catalytic decomposition of CH4 on these catalysts. The effects of the citric acid concentration and the activation temperature on catalytic activity were investigated by CO adsorption, TEM and XRD techniques. The experimental results showed that the particle size of the catalysts prepared through gel auto-combustion varied with the concentration of citric acid. Therefore carbon nanotubes with different diameters were obtained correspondingly. The effect of activation temperature on the activity of catalyst was negligible from 500 to 700 ℃, but it became pronounced at lower or higher temperatures.

Modeling and Optimization of Two Clays Acidic Activation for Phosphate Ions Removal in Aqueous Solution by Response Surface Methodology

This work deals with phosphate ions removal in aqueous solution by adsorption carried out using two clays, both in activated form. One, non-swelling clay, rich in kaolinite, is associated with illite and quartz. The other, swelling, richer in montmorillonite, is associated with kaolinite, illite and quartz. Seven factors including these two clays were taken into account in a series of experimental designs in order to model and optimize the acidic activation process favoring a better phosphate removal. In addition to the choice of clay nature, the study was also interested in the identification of the mineral acid, between hydrochloric acid and sulfuric acid, which would promote this acidic activation. Response Surface Methodology (RSM) was used for this purpose by sequentially applying Plackett and Burman Design and Full Factorial Design (FD) for screening. Then, a central composite design (CCD) was used for modeling the activation process. A mathematical surface model has been successfully established. Thus, the best acidic activation conditions were obtained by activating the montmorillonite clay with a 2N sulfuric acid solution, in an acid/clay mass ratio of 7.5 at 100°C for 16H. The phosphate removal maximum rate obtained was estimated at 89.32% ± 0.86%.

Chlorogenic acid modulates glucose and lipid metabolisms via AMPK activation in HepG2 cells and shows its anti-hyperglycemic effect on streptozocin-induced diabetic mice

Objective:In this study,we focus on the hypoglycemic effects of chlorogenic acid(CGA)in vitro and in vivo and its mechanism base on regulate glucose and lipid metabolism via AMPK activation.Methods:The cytotoxicity,glucose consumption and intracellular triglyceride assay were been detected by commercial kits.The western blots were used to detection the associated protein levels after CGA treatment,and the inhibiter blocking experiments were also be done.In vivo experiment,the fasting blood-glucose,lipid metabolism,liver function,insulin resistance,glucose tolerance,and pathological change were assessed on streptozocin induced diabetic mice.Results:We found that CGA exhibited no cytotoxicity at concentrations of 100μM,it caused a significant increasing of glucose consumption and reducing of the PA-BSA induced intracellular TG level on HepG2 cells at 50μM and 100μM treatment,CGA exhibited up-regulating the level of p-AMPK(Thr172)and p-ACC(Ser79)in dose-dependent manners in vitro and in vivo.The stimulating activities of CGA on AMPK were completely blocked by compound c(CC)on HepG2 cells.And the efficacies of CGA on glucose consumption and intracellular TG accumulation were also completely blocked by CC pretreatment.The CGA also exhibited potent anti-diabetic effects with hypoglycemic activity,improve insulin resistance and glucose tolerance,regulate glucose and lipid metabolism and protect the liver function in vivo.Conclusion:Our results suggested that CGA can regulate glucose and lipid metabolism by AMPK activation,and exhibit potent anti-hyperglycemic effect in streptozocin induced diabetes mice,and may be used as a potential effective anti-diabetes drug.

Synergism of Zinc Oxide/Organoclay-Loaded Poly(lactic acid) Hybrid Nanocomposite Plasticized by Triacetin for Sustainable Active Food Packaging

The synergistic effect of organoclay(OC)and zinc oxide(ZnO)nanoparticles on the crucial properties of poly(lactic acid)(PLA)nanocompositefilms was systematically investigated herein.After their incorporation into PLA via the solvent casting technique,the water vapor barrier property of the PLA/OC/ZnOfilm improved by a maximum of 86%compared to the neat PLAfilm without the deterioration of Young’s modulus or the tensile strength.Moreover,thefilm’s self-antibacterial activity against foodborne pathogens,including gram-negative(Escherichia coli,E.coli)and gram-positive(Staphylococcus aureus,S.aureus)bacteria,was enhanced by a max-imum of approximately 98–99%compared to the neat PLAfilm.Furthermore,SEM images revealed the homo-geneous dispersion of both nano-fillers in the PLA matrix.However,the thermal stability of thefilm decreased slightly after the addition of the OC and ZnO.Thefilm exhibited notable light barrier properties in the UV-Vis range.Moreover,the incorporation of a suitable biodegradable plasticizer significantly decreased the Tg and notably enhanced theflexibility of the nanocompositefilm by increasing the elongation at break approxi-mately 1.5-fold compared to that of the neat PLAfilm.This contributes to its feasibility as an active food packa-ging material.

马铃薯疮痂病菌Streptomyces acidiscabies鉴定及抑菌有机酸筛选

本研究旨在鉴定微型薯连作基质中疮痂病原菌的种类,筛选具有良好抑制活性的有机酸以利于控制疮痂病发生。研究从病薯上分离纯化病原菌,用薯片法、萝卜片法及温室盆栽接种法检测其致病性,结合形态学观察、生理生化特性测定及16S rRNA基因序列分析确定种类,对其耐盐性等生物学特性进行研究,用纸碟法测定甲酸等有机酸对疮痂链霉菌生长的影响。链霉菌19311具有致病性,其致病岛毒力相关基因型为txtAB+/tomA+/necI+,根据19311菌株培养特征、生理生化特性及16S rRNA序列分析结果鉴定为酸性疮痂链霉菌(Streptomyces acidiscabies)。甲酸、乙酸、丙酸、乳酸、柠檬酸、酒石酸可显著抑制S.acidiscabies的生长,甲酸抑菌效果最佳,抑菌圈直径为45.43 mm,抑菌最低有效浓度为1%,可通过增加细胞膜通透性抑制S.acidiscabies生长。综上所述,本研究明确了微型薯生产基质中疮痂链霉菌19311的种类及其生物学特性。未来可考虑使用1%甲酸进行疮痂病的控制试验,并评估其对原原种生产的潜在影响。

Calcination/acid-activation treatment of an anodic oxidation TiO_2/Ti film catalyst

The aim of this work was to investigate the effects of calcination/acid-activation on the composition, structure, and photocatalytic （PC） reduction property of an anodic oxidation TiO2/Ti film catalyst. The surface morphology and phase composition were examined by scanning electron microscopy and X-ray diffraction. The catalytic property of the film catalysts was evaluated through the removal rate of potassium chromate during the PC reduction process. The results showed that the film catalysts were composed of anatase and rutile TiO2 with a micro-porous surface structure. The calcination treatment increased the content of TiO2 in the film, changed the relative ratio of anatase and rutile TiO2, and decreased the size of the micro pores of the film catalysts. The removal rate of potassium chromate was related to the technique parameters of calcination/acid-activation treatment. When the anodic oxidation TiO2/Ti film catalyst was calcined at 873 K for 30 min and then acid-activated in the concentrated H2SO4 for 60 min, it presented the highest catalytic property, with the removal rate of potassium chromate of 96.3% during the PC reduction process under the experimental conditions.