Surface interaction between Pd and nitrogen derived from hyperbranched polyamide towards highly effective formic acid dehydrogenation

Hydrogen production from formic acid decomposition(FAD)is a promising means of hydrogen energy storage and utilization in fuel cells.Development of efficient catalysts for dehydrogenation of formic acid is a challenging topic.The surface chemical and electronic structure of the active catalysis components is important in formic acid decomposition at room-temperature.Here,the pyrdinic-nitrogen doped catalysts from hyperbranched polyamide were prepared via in situ polymerization reaction process by using activated carbon as a support.Because of the introduction of the polymer,the particles of the catalysts were stabilized,and the average particle diameter was only 1.64 nm.Under mild conditions,the catalysts activities were evaluated for FAD.The optimized Pd-N30/C catalyst exhibited high performance achieving almost full conversion,with a turnover frequency of 3481 h^-1 at 30℃.

Catalytic hydrolysis of CFC-12 over solid acid Ti(SO_4)_2

The catalytic hydrolysis of dichlorodifluoromethane (CFC-12) was investigated over solid acid Ti(SO_4)_2. The catalytic activity decreased with the calcination temperature. When space velocity was 6 1 h^(-1) g-cat^(-1). the CPC-12 conversion at 310C over Ti(SO_4)_2 calcined at 350C remained about 98.5% during 360 h on stream. and the selectivity to by-products remained zero. The findings enlarged the scope of traditional catalyst systems for the CFCs decomposition.

Low Temperature H_(2) Production from Formic Acid Aqueous Solution Catalyzed on Metal Doped Mo_(2)C

Hydrogen is recognized as a promising energy scours in the close future.Online hydrogen preparation from formic acid under mild reaction conditions causes extensive interests.Mo_(2)C and metal(Fe,Ni,Co,K)doped Mo_(2)C on granular activated carbon(GAC)were prepared and used as heterogeneous catalysts for H2 generation from formic acid on a fixed bed reactor at 100–250°C.The formic acid conversions on doped Mo_(2)C-Me/GAC are clearly improved,especially at lower reaction temperatures.Co doping presents outstanding effect on H2 selectivity and conversion rate compared to Ni and Fe.A 56.3%formic acid conversion was reached on Mo_(2)C-Co/GAC at 100°C,which triples that on Mo_(2)C/GAC at the same temperature.At 150°C,a high formic acid conversion over 90%was reached on Mo_(2)C-Co/GAC.These long lifetime catalysts with no precious metal provide a low cost route to hydrogen production from formic acid.

Precipitation of flaky moolooite and its thermal decomposition

Moolooite particles with flaky morphology were synthesized by mixing dilute solutions of copper nitrate and sodium oxalate in the presence of citric acid. Solution p H value, citric acid concentration, and stirring were found to have large effect on the shape of the precipitated particles. Under the stirring, the radial area of flaky moolooite particles was enlarged and extended to become a thinner and larger flake. This is ascribed to growth promotion caused by the selective absorption of citric ligands onto a particular crystalline surface of the moolooite particles. Flaky shape of the moolooite particles tended to become spherical and disappeared completely when decomposed under an Ar atmosphere, leading to the formation of large porous aggregated particles composed of many tiny nanosized copper crystals.

Design of Pd{111}-TiO_2 interface for enhanced catalytic efficiency towards formic acid decomposition

Supports are commonly implemented in the industrial application of heterogeneous catalysts to improve the stability and recyclability of catalysts.The supported catalysts often show the enhanced activity and selectivity in various catalytic reactions.However,the specific contributions of electronic and steric effects to a catalytic system often remain elusive due to the lack of well-defined model systems.In this work,two types of uniform Pd nanocrystals covered by{111}facets in tetrahedral and octahedral shapes,respectively,are synthesized with identical chemical environment and loaded on Ti O_2supports to form hybrid structures(Pd{111}-Ti O_2)towards the application of formic acid decomposition.Our observation suggests that the polarization effect at the interface of Pd-Ti O_2enhances its activity in formic acid decomposition.Moreover,the Pd tetrahedrons-Ti O_2hybrid structure whose Pd{111}-Ti O_2interface possesses a larger angle shows higher catalytic activity,owing to the reduced steric effect as compared to Pd octahedrons-Ti O_2.This study reveals the nature of interface effects in formic acid decomposition,and provides a guidance for the related catalyst design.

Agglomerated Pd Catalysts and Their Applications in Hydrogen Production from Formic Acid Decomposition at Room Temperature

Agglomerated Pd catalysts with the nano-porous structure were simply prepared by one-step reduction reaction without using any stabilizer. The Pd catalysts show a high catalytic activity for the decomposition of formic acid at room temperature. Among all the Pd catalysts tested, the Pdug catalyst exhibits the highest catalytic activity. Moreover, the breakthrough of the advanced catalysts is that the above agglomerated Pd catalysts can be easily separated from the liquid system to control the catalytic reaction at any time, which may further promote the practical application of formic acid as a H2 storage material.