Preparation and Performance of Chitosan/Citric Acid Modified Magnesium Oxychloride Cement

Citric acid(CA)and chitosan(CS)were employed to modify magnesium oxychloride cement(MOC).Multiscale measurements were implemented to study the properties of the modified MOC pastes.Results show that the addition of CA/CS significantly changes the content of each phase and the microstructure of phase 5.The single addition of CA can effectively increase the compressive strength of MOC after 7 d curing,while CS exerts no obvious effect on the compressive strength.As to the simultaneous addition of CA and CS,the compressive strength of MOC gradually decreases with the increasing content of CS.Interestingly,mixing CA and CS significantly enhances the water resistance of MOC and decreases the degradation rate of MOC in phosphate buffered solution,which can be ascribed to the low specific surface area of the plate-like crystals in the modified MOC and the reduction of pores in the structure.

Three novel dendritic chitosan derivatives for inhibiting acid corrosion of petroleum pipelines

In the process of exploration and development of oil and gas fields, the acidic environment of oil reservoir, production and transport processes cause corrosion of pipelines and equipment, resulting in huge economic losses and production safety risks. Corrosion inhibitors were widely used in oil industry because of simple operation process and economical. In this study, three environmentally friendly corrosion inhibitors were synthesized based on the natural polysaccharide chitosan. Corrosion inhibition of three dendritic chitosan derivatives (We name them BH, CH and DH) on mild steel in 1 mol/L HCl solution with natural ventilation system was evaluated by weight loss experiment, electrochemical analysis and surface morphology characterization. The experimental results showed that when the three dendritic chitosan derivatives added in the corrosive medium were 500 mg L^(−1), the corrosion inhibition efficiencies were all more than 80%. Based on quantum chemical calculation, inhibition mechanisms of three dendritic chitosan derivatives were investigated according to molecular structures. The results showed that the benzene ring, Schiff base and N atom contained in the molecule were the active centers of electron exchange, which were more likely to form a film on the carbon steel surface, thereby slowing or inhibiting corrosion. The results also predicted the corrosion inhibition effect BH > DH > CH, which was consistent with the experimental conclusion.

Properties enhancement of antimicrobial chitosan-deposited polylactic acid films via cold plasma treatment

The present study aimed to understand the effect of dielectric barrier discharge cold plasma(DBD-CP)technology on the antimicrobial chitosan deposition and the properties enhancement of polylactic acid(PLA)films.The results indicated that DBD-CP was an effective method for improving the adhesion and surface hydrophilicity of PLA,facilitating the deposition of chitosan coating.This modification was attributed to the increased surface roughness,as well as the presence of polar functional groups observed through atomic force microscopy,surface free energy and Fourier transform infrared spectroscopy analysis.The study further revealed that both water resistance and mechanical properties were significantly improved after DBD-CP treatment,which was positively correlated with the amount of chitosan deposited on the PLA surfaces.Following comprehensive evaluation,the treatment at 75 W was determined as the optimal condition for enhancing the properties.Additionally,the modified film exhibited strong antimicrobial activity against Staphylococcus aureus.Consequently,the DBD-CP technology could be a promising tool for better utilization of PLA-based materials in the antibacterial food packaging industry.

Effects of Chitosan and Salicylic Acid on Cold Resistance of Litchi under Low Temperature

This paper focused on the effect of spraying chitosan and salicylic acid to Litchi under low temperature stress conditions.The physiology and biochemistry of litchi were studied as well.Results showed that the appropriate concentration of chitosan and salicylic acid treatment could effectively reduce injury caused by low temperature to litchi,compared with water control,chlorophyll,proline,soluble protein content of litchi after treatment and the activity of protective enzyme increasing significantly.However,the accumulation of resistance could significantly be improved.Furthermore,when 1 000 mg/L chitosan combined with 50 mg/L salicylic acid,the litchi acquired the best cold resistance capability.

Preparation of chitosan-polyaspartic acid-5-fluorouracil nanoparticles and its anti-carcinoma effect on tumor growth in nude mice

AIM: To prepare chitosan-polyaspartic acid-5-fluorouracil (CTS-Pasp-5Fu) nanoparticles and investigate its anti-carcinoma effect and toxicity. METHODS: CTS-Pasp-5Fu nanoparticles were synthesized by ionic gelatification. Male BABL/c nude mice were injected with SGC-7901 gastric carcinoma cell line mass to establish a human gastric carcinoma model. They were randomly allocated into 4 groups: CTS-Pasp-5Fu (containing 5-Fu 1.25 mg/kg), 5-Fu (1.25 mg/kg), CTS-Pasp and normal saline groups. Tumor weight was measured and assay of colony forming unit-granulocyte and macrophage (CFU-GM) was performed. The structural change of cells and tissues was observed and the Bax and Bcl-2 genes were detected. RESULTS: Compared with normal saline, the inhibition rates of tumor growth for the CTS-Pasp, 5-Fu and CTS-Pasp-5Fu groups were 5.58%, 58.69% and 70.82%, respectively. The tumor inhibition rates for the CTS-Pasp, 5-Fu and CTS-Pasp-5Fu groups were 5.09%, 65.3% and 72.79%, respectively. There was a significant decrease in the number of CFU-GMformation and increase of total bilirubin, and alanine aminotransferase in the 5-Fu group, but no change in those of the other three groups. There was no change in white blood cell count and creatinine among the four groups. Pathological section of liver and nephridial tissues showed that the damage in the 5-Fu group was more severe than that in the CTS-Pasp-5Fu group. 5-Fu and CTS-Pasp-5Fu groups could both down-regulate the Bcl-2 expression and up-regulate the Bax expression to different extent, and the accommodate effect of CTS-Pasp-5Fu was more obvious than 5-Fu. CONCLUSION: The tumor inhibition rate of CTS-Pasp-5Fu nanoparticles is much higher than that of 5-Fu alone.

Preparation and Charaterization of Self-assembled Nanoparticles Based on Linolenic-acid Modified Chitosan

Chitosan was modified by conjugating coupling with linolenic acid through the 1-ethyl-3-（3-dimethylami- nopropyyl） carbodiimide （EDC）-mediated reaction. The degree of substitution 1.8% （ i.e. 1.8 linolenic acid group per 100 anhydroglucose units） was measured by ^1H NMR. The critical aggregation concentration （CAC） of the self-aggregate of hydrophobically modified chitosan was determined by measuring the fluorescence intensity of the pyrene as a fluorescent probe. The CAC value in phosphate-buffered saline （PBS） solution （pH 7.4） was 5 × 10^-2 mg mL^-1. The average particle size of selfaggregates of hydrophobically modified chitosan in PBS solution （pH7.4） was 210.8 nm with a unimodal size distribution ranging from 100 to 500 nm. Transmission electron microscopy （TEM） study showed that the formation of near spherical shape nanoparticles has enough structural integrity. The loading ability of hydrophibically modified chitosan （LA-chitosan） was investigated by using bovine serum albumin （BSA） as the model. The loading capacity of self-aggregated nanoparticles increases （ 19.85 % ± 0.04 % to 37.57 % ± 0.25 % ） with the concentration of BSA （0.1-0.5 mg mL^-1 ）.

CROSS-LINKING OF CHITOSAN WITH GLUTARALDEHYDE IN THE PRESENCE OF CITRIC ACID——A NEW GELLING SYSTEM

The procedure for preparing a new type of uniform and porous chitosan gel from citric acid medium is described. Its swelling behavior in different media was compared with those of the gels prepared by other methods. The ultrastructure of the xerogel prepared from citric acid was characterized using electron microscopy (SEM).

Chlorogenic acid loaded chitosan nanoparticles with sustained release property,retained antioxidant activity and enhanced bioavailability

In this study,chlorogenic acid(CGA),a phenolic compound widely distributed in fruits and vegetables,was encapsulated into chitosan nanoparticles by ionic gelation method.The particles exhibited the size and zeta potential of 210 nm and 33 mV respectively.A regular,spherical shaped distribution of nanoparticles was observed through scanning electron microscopy(SEM)and the success of entrapment was confirmed by FTIR analysis.The encapsulation efficiency of CGA was at about 59%with the loading efficiency of 5.2%.In vitro ABTS assay indicated that the radical scavenging activity of CAG was retained in the nanostructure and further,the release kinetics study revealed the burst release of 69%CGA from nanoparticles at the end of 100th hours.Pharmacokinetic analysis in rats showed a lower level of Cmax,longer Tmax,longer MRT,larger AUC0et and AUC0e∞for the CGA nanoparticles compared to free CGA.Collectively,these results suggest that the synthesised nanoparticle with sustained release property can therefore ease the fortification of food-matrices targeted for health benefits through effective delivery of CGA in body.

Synthesis and Characterization of Chitosan-g-poly- (D, L-lactic acid) Copolymer

Biodegradable chitosan-g-poly (D, L-lactic acid) copolymers were prepared via two methods. (1) The lactide was grafted onto hydroxyl groups of chitosan by using macromolecular initiator sodium of trimethylsilyl-chitosan, (2) poly (D,L-lactic acid)(PLA) with low molecular weight can be linked to the amino group by coupling activated PLA to trimethylsilyl-chitosan. Two graft copolymers had hydrophilic-hydrophobic character and can be applied as carriers for drug delivery.

Dorsal root ganglion-derived Schwann cells combined with poly(lactic-co-glycolic acid)/chitosan conduits for the repair of sciatic nerve defects in rats

Schwann cells, nerve regeneration promoters in peripheral nerve tissue engineering, can be used to repair both the peripheral and central nervous systems. However, isolation and puriifcation of Schwann cells are complicated by contamination with ifbroblasts. Current reported measures are mainly limited by either high cost or complicated procedures with low cell yields or purity. In this study, we collected dorsal root ganglia from neonatal rats from which we obtained highly puriifed Schwann cells using serum-free melanocyte culture medium. The purity of Schwann cells （〉95%） using our method was higher than that using standard medium containing fetal bovine serum. The obtained Schwann cells were implanted into poly（lactic-co-glycolic acid）/chi-tosan conduits to repair 10-mm sciatic nerve defects in rats. Results showed that axonal diameter and area were signiifcantly increased and motor functions were obviously improved in the rat sciatic nerve tissue. Experimental ifndings suggest that serum-free melanocyte culture medium is conducive to purify Schwann cells and poly（lactic-co-glycolic acid）/chitosan nerve conduits combined with Schwann cells contribute to restore sciatic nerve defects.

Synthesis of a magnetic-separated chitosan-palladium complex and its catalytic activity in the reaction of acrylic acid with iodobenzene

A magnetic-separated catalyst of chitosan-palladium complex （Fe3O-CS-Pd） based on chitosan coated Fe3O4 microspheres was prepared by the ＂bottom-up＂ approach. The catalytic behavior of the catalyst in the cross coupling reaction of acrylic acid （AA） with iodobenzene （ArI） was investigated. Compared with the traditional homogeneous palladium catalysts, the catalyst was easily separated and reused.

Preparation and functional characterization of tumor-targeted folic acid-chitosan conjugated nanoparticles loaded with mitoxantrone

Folic acid conjugated chitosan was prepared by cross-linking reaction with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride(EDC), and then used as a template to prepare folic acid-chitosan(FA-CS) conjugated nanoparticles and load mitoxantrone nanoparticles(FA-CSNP/MTX). Drug dissolution testing, CCK-8 method, and confocal microscopy were used to detect their controlled-release capability in different situations and the specific uptake by HONE1 cells. The experimental results show that the nanoparticles have uniform size distribution of 48-58 nm. The highest encapsulation rate of the particles on mitoxantrone hydrochloride(MTX) is(77.5±1.9)%, and the drug loading efficiency is(18.4±0.4)%. The sustained release effect, cell growth inhibition activity and targeting effect of the FA-CS/MTX nanoparticles are good in artificial gastric fluid and intestinal fluid. It is demonstrated that the FA-CSNP system is a potentially useful system for the targeted delivery of anticancer drug MTX.

Effect of Chitosan Coating on the Properties of Poly(glycolic acid-lactic acid)Thread-Embedding Material

Poly( glycolic acid-lactic acid)( PGLA) threadembedding material was modified by chitosan coating which could improve the rigidity,hydrophilicity and moisture absorption of the material,and produced better stimulation effect. Thus,this kind of thread-embedding materials which can be buried into acupuncture points to produce a long-time stimulation is popular in the acupuncture and moxibustion therapies. The variation tendencies of diameter,weight, hydrophilicity, and flexibility of the samples under the change of chitosan coating concentration,coating time and coating times were studied respectively. The results showed that the hydrophilicity,weight,and rigidity after coating rose in a certain range with the increase of coating time,coating times and coating concentration. The coating time had little influence on the diameter of fiber.

Chemical functionalization of chitosan biopolymer and chitosan-magnetite nanocomposite with sulfonic acid for acid-catalyzed reactions

Chemical functionalization of chitosan biopolymer and chitosan-magnetite nanocomposite was performed with sulfonic acid functional groups to achieve new solid acid materials.The sulfonic acid functional groups were created through the ring opening nucleophilic reaction of amine groups of chitosan with 1,4-butane sultone.Fourier transform infrared spectroscopy(FT-IR)and X-ray photoelectron spectroscopies(XPS)verified the successful sulfonic acid functionalization of chitosan.The obtained sulfonic acid functionalized chitosan-magnetite nanocomposite showed superparamagnetic properties according to the vibrating sample magnetometry analysis and exhibited magnetic separation feature from dispersed mixtures.Nitrogen adsorption-desorption analysis indicated the increase in surface area after formation of chitosan-magnetite nanocomposite and functionalization with sulfonic acid.Both of the prepared solid acids exhibited high catalytic activities in the acid-catalyzed acetic acid esterification with n-butanol and benzaldehyde acetalization with ethylene glycol as model reactions.Furthermore,they can be reused several times without considerable loss of their activities.

Preparation of Gallic Acid-chitosan Copolymer and Its Antibacterial Activity against Staphylococcus Aureus and Escherichia Coli

To synthesize three different grafting ratios of gallic acid(GA)-chitosan(CS)copolymer by a free radical mediated grafting method,which is further applied to the field of antibacterial materials,crosslinking structures of the compound GA-CS copolymer were characterized,fully indicating that gallic acid is resoundingly grafted onto chitosan.The grafting ratios of three copolymers GA-CS are 45.71%(Ⅰ),36.12%(Ⅱ),and 18.96%(Ⅲ)were determined by UV-Vis spectrophotometer.The minimum inhibitory concentrations of three GA-CS copolymers are 30μg/mL against Escherichia coli and are ranged from 250 to 550μg/mL against Staphylococcus aureus.By counting viable bacterial colonies,it can be found that antibacterial property is preferable by increasing the grafting ratio of GA-CS copolymers.Findings of investigation on aforementioned bacteria experiment indicate that the CFU/mL values of GA-CS(Ⅰ,Ⅱ,Ⅲ)are 2.04×10^(6),7.56×10^(6),1.48×10^(7) to Staphylococcus aureus,and 2.96×10^(6),1.01×10^(7),2.14×10^(7) to Escherichia coli after 12 h treatment.In addition,the interaction process between GA-CS copolymer and bacteria can be observed through a transmission electron microscope.The specific manifestation is that the bacterial cell membranes are ruptured after being treated with the copolymer,which causes the cell contents to flow out,and the cell morphology is shrunk and out ofshape.

Study on graft copolymerization of chitosan with AA （acrylic acid） and flocculating ability of the product

Graft copolymerization is one of the most attractive methods to modify natural polymers. In this study, graft copolymerization of acylic acid onto chitosan in aqueous media by ceric ammonium nitrate was investigated. The graft copolymerization reaction was carried out in a three necked flask maintained at 70＋/-0.05 ℃ under nitrogen atmosphere in a homogeneous aqueous phase （containing a small potion of acetic acid） by using ceric ammonium nitrate as an initiator. Evidence of grafting was obtained. The synthetic conditions were systematically optimized through studying the influential factors on grafting. The effectiveness of each individual factor was investigated by calculating and monitoring the variations of the grafting parameters [like monomer conversation Cm, grafting efficiency （Ge） and viscosity]. Under optimum conditions monomer conversion of 100.5% and graft efficiency of 94% were obtained, at temperature of 70℃. Flocculating ability of the copolymerization product of chitosan was studied by using Kaolin suspension as the flocculating object. And the application of the product was applied in Huayue dyeing plant. The results indicate that the higher the viscosity is, the better the flocculating ability of the copolymerization product of chitosan will be. The flocculating percentage reaches 96.0%, when the concentration of the product is only 1.0 mg/L and pH fixed at 7.0. Suitable separating mixtures for the grafted copolymer were chosen and the investigation of flocculation ability of the grafted copolymer was carried out with the aim of developing a good flocculant for wastewater treatment. A test of treating dyeing wastewater with the grafted copolymer was carried out and showed that grafting of Acrylic Acid with chitosan has a high COD removal rate 75% to the dyeing wastewater when the concentration is only 6.0 mg/L.

A Multiwall Carbon Nanotube-chitosan Modified Electrode for Selective Detection of Dopamine in the Presence of Ascorbic Acid

A novel multiwall carbon nanotube-chitosan modified electrode has been prepared.The modified electrode resolves the overlapping voltammetric response of dopamine and ascorbicacid into two well-defined peak by 212 mV. The mechanism of discrimination of dopamine fromascorbic acid is discussed. Dopamine can be determined selectively with the carbonnanotube-chitosan modified electrode. The electrode shows good sensitivity, selectivity andstability.

The Adsorption Effect of Quaternized Chitosan Derivatives on Bile Acid

Three quatemized chitosan derivatives were synthesized and their adsorption performance of bile acid from aqueous solution was studied. The adsorption capacities and rates of bile acid onto quatemized chitosan derivatives were evaluated. The kinetic experimental data properly correlated with the second-order kinetic model, which indicated that the chemical sorption is the rate-limiting step. The results showed that the quatemized chitosan derivatives are favorable adsorbents for bile acid.

In Vitro Biomineralization of Glutaraldehyde Crosslinked Chitosan/Glutamic Acid Films

In vitro biomineralization of glutaraldehyde crosslinked chitosan/glutamic acid films were studied. IR and ESCA （electron spectroscopy for chemical analysis） determinations confirm that chitosan and glutamic acid are successfully crosslinked by glutaraldehyde to form chitosan-glutamic acid surfaces. Composite films were soaked in saturated Ca（OH）2 solution for 8 d and then immersed in simulated body fluid （SBF） for more than 20 d. Morphological characterizations and structure of cal-cium phosphate coatings deposited on the films were studied by SEM, XRD, and EDAX （energy dispersive X-ray analysis）. Initially, the treatment in SBF results in the formation of single-layer cal-cium phosphate particles over the film surface. As immersion time increases, further nucleation and growth produce the simulated calcium-carbonate hydroxyapatite coating. ICP results show Ca/P ratio of calcium phosphate coating is a function of SBF immersion time. The inducing of glutamic acid improves the biomineralization property of chitosan films.

Chitosan——L-Lactic Acid Scaffold for the Regeneration of Peripheral Nerve and Its NGF Release Properties

Chitosan—L-lactic acid composite scaffold for the regeneration of peripheral nerve is obtained by grafting L-lactic acid onto the amino groups in chitosan with combined vacuum freezer drier. The composite scaffold was characterized by ATR-FTIR and SEM. The scaffold has a better graft efficiency and has a dense inner layer and a loose outer layer with porous structure, and the pore size is about 100 μm.The NGF release properties of the scaffold were investigated. The experimental results showed that, at the 1st day, 15.2 ng of NGF on average was released from the scaffold. From day 2 to day 10, the release rate obviously slowed down and 1.64 ng of NGF was released on average every day. After 10 days, the release rate was slower and 10.3 ng of NGF was released on average every day. After 60 days, NGF could also maintained a certain concentration. These properties show that the scaffold is a better carrier for NGF which can be more advantageous to the regeneration of the damaged peripheral nerve. As a result, this composite scaffold would be an ideal candidate for the regeneration of damaged peripheral nerve.