A Polyvinyl Alcohol/Acrylamide Hydrogel with Enhanced Mechanical Properties Promotes Full-Thickness Skin Defect Healing by Regulating Immunomodulation and Angiogenesis Through Paracrine Secretion

Hydrogel-based tissue-engineered skin has attracted increased attention due to its potential to restore the structural integrity and functionality of skin.However,the mechanical properties of hydrogel scaffolds and natural skin are substantially different.Here,we developed a polyvinyl alcohol(PVA)/acrylamide based interpenetrating network(IPN)hydrogel that was surface modified with polydopamine(PDA)and termed Dopa-gel.The Dopa-gel exhibited mechanical properties similar to native skin tissue and a superior ability to modulate paracrine functions.Furthermore,a tough scaffold with tensile resistance was fabricated using this hydrogel by three-dimensional printing.The results showed that the interpenetration of PVA,alginate,and polyacrylamide networks notably enhanced the mechanical properties of the hydrogel.Surface modification with PDA endowed the hydrogels with increased secretion of immunomodulatory and proangiogenic factors.In an in vivo model,Dopa-gel treatment accelerated wound closure,increased vascularization,and promoted a shift in macrophages from a proinflammatory M1 phenotype to a prohealing and anti-inflammatory M2 phenotype within the wound area.Mechanistically,the focal adhesion kinase(FAK)/extracellular signal-related kinase(ERK)signaling pathway may mediate the promotion of skin defect healing by increasing paracrine secretion via the Dopa-gel.Additionally,proangiogenic factors can be induced through Rho-associated kinase-2(ROCK-2)/vascular endothelial growth factor(VEGF)-mediated paracrine secretion under tensile stress conditions.Taken together,these findings suggest that the multifunctional Dopa-gel,which has good mechanical properties similar to those of native skin tissue and enhanced immunomodulatory and angiogenic properties,is a promising scaffold for skin tissue regeneration.

Probiotic microorganisms affect the reproductive and nervous systems of male rats treated with acrylamide

Objective:To evaluate the protective effects of probiotic microorganisms on the reproductive and nervous systems of male rats treated with acrylamide.Methods:Thirty-two rats were randomly divided into 4 groups and received normal saline through gavage(control),acrylamide 20 mg/kg body weight,acrylamide plus probiotic microorganisms(Lactobacillus acidophilus,Lactobacillus casei,Lactobacillus bulgaricus,Lactobacillus rhamnosus,Bifidobacterium breve,Bifidobacterium infantis,Streptococcus thermophilus and fructooligosaccharides,all mixed in sachets)20 or 200 mg/kg body weight,respectively.After 30 days,the testis,prostate,seminal vesicle and cerebellum were removed,fixed and stained with hematoxylin-eosin(H&E).The Johnsen score was used to classify spermatogenesis.Cavalieri's principle method was used to evaluate the total volume(in mm3)of the testes.The number of each intratubular cell type as well as intertubular Leydig cells in whole samples was measured using the physical dissector counting techniques.Stereological analysis and the grids were used to determine the volume of cerebellar layers as well as the Purkinje cell number.Results:The testis weight decreased significantly in the acrylamide-treated group compared to the other groups(P<0.001).The number of spermatogonia,spermatocytes,spermatids and Leydig cells in the acrylamide-treated group were significantly less compared to the control group(P<0.05),while they were increased significantly in the acrylamide+200 mg/kg probiotic group(P<0.05;P<0.01).The mean Johnsen score in the acrylamide-treated group was lower than in the control group(P<0.001).Acrylamide-induced changes including congestion,vacuolization in the secretory epithelial cells,and epithelial rupture were observed in the prostate and seminal vesicle.The volumes of cerebellar layers were decreased in the acrylamide group compared to the control group while recovered in both probiotic treated groups.Conclusions:Probiotic microorganisms alleviate acrylamide-induced toxicities against the reproductive and cerebellar tissues in rats.

Protective mechanism of quercetin compounds against acrylamide-induced hepatotoxicity

Quercetin compounds have antioxidant,anti-inflammatory and anticancer pharmacological functions.Longterm exposure to acrylamide(AA)can cause liver injury and endanger human health.However,whether quercetin compounds can attenuate AA-induced liver injury and the specific mechanism are not clear.Here,we studied the mechanism and structure-activity relationship of quercetin compounds in reducing AA-induced hepatotoxicity in vivo and in vitro.In vivo studies found that quercetin-like compounds protect against AAinduced liver injury by reducing oxidative stress levels,activating the Akt/m TOR signaling pathway to attenuate autophagy,and improving mitochondrial apoptosis and endoplasmic reticulum stress-mediated apoptosis.In vitro studies found that quercetin compounds protected Hep G2 cells from AA by attenuating the activation of AA-induced autophagy,lowering reactive oxygen species(ROS)levels by exerting antioxidant effects and thus attenuating oxidative stress,increasing mitochondrial membrane potential(MMP),and improving apoptosis-related proteins,thus attenuating AA-induced apoptosis.Furthermore,the conformational differences between quercetin compounds correlated with their protective capacity against AA-induced hepatotoxicity,with quercetin showing the best protective capacity due to its strongest antioxidant activity.In conclusion,quercetin compounds can protect against AA-induced liver injury through multiple pathways of oxidative stress,autophagy and apoptosis,and their protective capacity correlates with antioxidant activity.

Procyanidin A_1 and its digestive products alleviate acrylamide-induced IPEC-J2 cell damage through regulating Keap1/Nrf2 pathway

Our previous study has revealed that procyanidin A_(1)(A_(1))and its simulated digestive product(D-A,)can alleviate acrylamide(ACR)-induced intestine cell damage.However,the underlying mechanism remains unknown.In this study,we elucidated the molecular mechanism for and D-A_(1) to alleviate ACR-stimulated IPEC-J2 cell damage.ACR slightly activated nuclear factor erythroid 2-related factor 2(Nrf2)signaling and its target genes,but this activation could not reduce intestine cell damage.A_(1) and D-A_(1) could alleviate ACR-induced cell damage,but the effect was abrogated in cells transiently transfected with Nrf2 small interfering RNA(siRNA).Further investigation confirmed that A_(1) and D-A_(1) interacted with Ketch-like ECH-associated protein 1(Keapl),which boosted the stabilization of Nrf2,subsequently promoted the translocation of Nrf2 into the nucleus,and further increased the expression of antioxidant proteins,thereby inhibiting glutathione(GSH)consumption,maintaining redox balance and eventually alleviating ACR-induced cell damage.Importantly,there was no difference between A_(1) and D-A_(1) treated groups,indicating that A_(1) can tolerate gastrointestinal digestion and may be a potential compound to limit the toxicity of ACR.

ZnO Incorporated Acrylamide Grafted Chitosan Based Composite Film for Advanced Wound Healing Applications

This study was carried out to prepare ZnO nanoparticles incorporated acrylamide grafted chitosan composite film for possible biomedical application especially drug loading in wound healing. ZnO nanoparticles were prepared by co-precipitation method from zinc acetate di-hydrate and incorporated in acrylamide grafted chitosan. FT-IR and TGA of the prepared composite film confirmed the successful incorporation of ZnO nanoparticles in the acrylamide-grafted polymer matrix. SEM images showed that the ZnO nanoparticles were homogeneously distributed on the porous matrix of the composite film. Water uptake and buffer uptake analysis revealed that the composite film could hold water and buffer sufficiently, which facilitated the absorption of exudate from the wound site. Amoxicillin was loaded in the prepared composite film and the maximum loading efficiency was found to be 67.33% with drug concentration of 300 ppm. In vitro studies showed greater antimicrobial activity of drug-loaded composite film compared to both pure film and standard antibiotic disc. Finally, the In vivo mouse model showed maximum healing efficiency compared to conventional gauge bandages because the loading of antibiotic in the film produced a synergistic effect and healing time was reduced.

Melatonin alleviates oxidative stress,inflammation,apoptosis,and DNA damage in acrylamide-induced nephrotoxicity in rats

Objective:To investigate the effects of melatonin on renal inflammation,oxidative stress,apoptosis,as well as DNA and tissue damage in acrylamide-induced nephrotoxicity in rats.Methods:Fifty male rats were randomly divided into five groups.The control group received distilled water by gastric lavage for 11days and the acrylamide group was administered acrylamide(50 mg/kg,i.g.)for 11 days.The MEL10+ACR and MEL20+ACR groups received intraperitoneal melatonin 10 and 20 mg/kg,respectively,for 11 days,and acrylamide(50 mg/kg,i.g.)was administered 1h after melatonin injection.The MEL20 group was injected with melatonin(20 mg/kg)for 11 days.Kidney function tests were performed and biochemical and inflammatory parameters were determined.In addition,histopathological,immunohistochemical,and immunofluorescence examinations were carried out.Results:Melatonin significantly abated acrylamide-induced rise in serum urea and creatinine levels.Acrylamide caused oxidative stress,inflammation,apoptosis,as well as DNA and tissue damage in the kidneys.Melatonin treatment alleviated acrylamide-induced renal damage by exhibiting antioxidant,anti-inflammatory,and antiapoptotic effects.Moreover,melatonin significantly ameliorated acrylamide-caused histopathological changes in kidney tissue.Conclusions:Melatonin attenuates acrylamide-induced renal oxidative stress,inflammation,apoptosis,and DNA damage in rats.

Food borne toxicants in coffee:Acrylamide and furan derivative content in Arabica and Robusta coffees with different roasting profiles and varying degrees of roast

To evaluate mitigation options for both acrylamide and furan and methylfurans a Vietnam Robusta grade 2 and a Brazil Arabica(unwashed)coffee were roasted by tangential,drum and hot air roasting.Three different roasting profiles were followed and three samples(light,medium and dark roast)were obtained per profile.Decaffeinated and steam treated batches of the two coffees were roasted.Special roasts,such as double roast(on 2 days with cooling down in between)or roasting with a sudden temperature change were studied.The contaminants were analyzed by GC-MS–in case of the furans headspace GC-MS–using deuterated standards.The acrylamide contents were highest in light roasts,and decreased after that with longer roasting time.This was true for both the Robusta and Arabica samples.The content of furan and 2-,3-and 2,5-methylfurans were low in light roasts and had a maximum in dark roasts.It is possible to minimize the content of either acrylamide and furans,however,a mitigation of both could not be established by changing the roasting parameters or using pretreatments.Among the furans determined,2-methylfuran was most abundant(average around 70%),followed by furan(average around 20%).The special roasts showed no options to minimize both contaminants as did the pretreatments.In Vietnam Robusta,furan related compounds were measured.5-hydroxymethylfurfural and 5-hydroxymethylfurfuryl-2-carboxylic acid decreased with the degree of roast and time,while furfuryl alcohol and 2-furoic acid content increased.

Enhance of Grafting Reaction of Acrylic Acid and Acrylamide onto Preirradiated Polypropylene Film

Grafting of acrylic acid (AAc) and acrylamide (AAm) onto preirradiated PP film was performed in aqueous solution of AAc and AAm, respectively. Electron beam accelerator was used as irradiation source. The effect of ferrous sulfate, sodium nitrate, methanol and glucose on the degree of grafting was demonstrated. The function of the different additives was compared by the grafting of different monomers (AAc and AAm). The results show that the four of these additives are elective on the grafting of AAc. Only two of these additives, ferrous sulfate and methanol were effective on the grafting of AAm.

Synthesis and Flocculation Property of Chitosan-Acrylamide Graft Copolymer

Chitosan, as a kind of natural polymer, has many advantages, such as abundant sources, biological degradation, no secondary contamination and facile modification. In this work, we prepared modified chitosan flocculants with double electrical behavior via polymerizing chitosan, acrylamide and sodium carboxymethyl cellulose together by using ammonium persulfate as the indicator in water. The product is a comb-type of chitosan copolymer and a polymeric ampholyte. And then we studied the product by FTIR, UV-Vis, TG, DSC spectrometeries and viscometry, etc. We also performed CACM′s water treat experiment. The effects of pH values, reaction time and dose of the new floccalant on treating various of waste water have been investigated, too.

Dietary Exposure of the Chinese Population to Acrylamide

Objective To assess the current status of the acrylamide in the Chinese food supply, the dietary acrylamide exposure in the Chinese population and to estimate the public health risks of the current consumption. Methods The acrylamide content in the total diet study （TDS） food samples was analyzed using an LC-MS/MS method. Based on the analytical results, the dietary exposure calculations were performed using a deterministic method, combining mean acrylamide concentrations from the food group composite with their associated food consumptions. Results Acrylamide was detected in 43.7% of all samples collected and acrylamide concentration varied from ND to 526.6 I^g/kg. The estimated dietary intakes of acrylamide among Chinese general population given as the mean and the 95th percentile （P95） were 0.286 and 0.490 iJg.kg1 bw.day1, respectively. The margins of exposure （MOEs） for the population calculated using both benchmark dose lower confidence limit for a 10% extra risk of tumors in animals （BMDL10） 0.31 and 0.18 i^g.k8-1 bw-dayz, were 1069 and 621 for the mean dietary exposure, and 633 and 367 for the high dietary exposure respectively. Conclusion These MOE values might indicate a human health concern on acrylamide for Chinese population. Efforts should continue to reduce acrylamide levels in food in order to reduce the dietary risks to the human health.

SWELLING BEHAVIOR OF ACRYLAMIDE HYDROGEL IN DIFFERENT SOLVENTS AND pHs

Swelling property of acrylamide hydrogels,prepared from aqueous solutions of acrylamide monomer havingconcentrations in the range of 10-60 wt% by ray irradiation method using a Co-60 gamma radiation source at dosesranging 1-30.0 kGy,has been investigated under various swelling media.These swelling media were basically solvents(solutions),produced by dissolving methanol,ethanol,glucose,sucrose,sodium chloride and sodium persulfate individuallywith distilled water,and solutions prepared with pHs=3,7 and 10.The investigation was performed in order to observe theeffect of these solvents and pHs as well as the influence of monomer concentrations,radiation doses and times on swellingbehavior of hydrogels.Swelling values were found higher for hydrogels prepared with lower monomer concentrations(ca.20 wt%)and radiation doses(ca.5 kGy)and showed a leveling off tendency within 24 h.The glucose solvent and the buffersolution of pH=10 revealed significant increase of swelling of hydrogels as compared to other solutions.Results areexplained based on crosslinking density in hydrogel,polymer-solvent/polymer-polymer interactions in solutions,permeability of molecules in solutions and ionization capacity of hydrogel in pH.

Extract of Ginkgo biloba promotes neuronal regeneration in the hippocampus after exposure to acrylamide

Previous studies have demonstrated a neuroprotective effect of extract of Ginkgo biloba against neuronal damage, but have mainly focused on antioxidation of extract of Ginkgo biloba. To date, limited studies have determined whether extrasct of Ginkgo biloba has a protective effect on neuronal damage. In the present study, acrylamide and 30, 60, and 120 mg/kg extract of Ginkgo biloba were administered for 4 weeks by gavage to establish mouse models. Our results showed that 30, 60, and 120 mg/kg extract of Ginkgo biloba effectively alleviated the abnormal gait of poisoned mice, and up-regulated protein expression levels of doublecortin（DCX）, brain-derived neurotrophic factor, and growth associated protein-43（GAP-43） in the hippocampus. Simultaneously, DCX-and GAP-43-immunoreactive cells increased. These findings suggest that extract of Ginkgo biloba can mitigate neurotoxicity induced by acrylamide, and thereby promote neuronal regeneration in the hippocampus of acrylamide-treated mice.

Immunotoxicity of Acrylamide in Female BALB/c Mice

Objective To investigate the immunotoxicity of acrylamide （ACR） in female BALB/c mice.Methods A total of 200 female mice weighing 18-22 g were randomly divided into four clusters based on body weight, and each weight-based cluster included five groups （10 mice per group）： negative control, positive control （cyclophosphamide）, low, intermediate, and high dose ACR groups, and all the groups were administered ACR by gavage for 30 days. At the end of the study, the immunotoxicological effects of the ACR were evaluated through immunopathology, humoral immunity, cellular immunity, and non-specific immunity. Results The terminal body weight, spleen and thymus weights, lymphocyte counts in the ACR-H group were decreased, pathological changes were observed in lymph glands, thymus and spleen. %T cells in blood lymphocytes were significantly increased in all ACR-treated groups, and a significant reduction of % natural killer（NK） cells and increase of %Th cells were observed in the ACR-H group. interleukin-6（IL-6）, Concanavalin A（ConA）-induced splenocyte proliferation and serum half hemolysis value （HCso） were also significantly suppressed in the ACR-H group. Conclusion ACR elicited an inhibitory effect on cellular and humoral immunity of mice after 30 day feeding.

Studies on LCST of poly (N-isopropylacrylamide-co-acrylic acid-co-N-diacetone acrylamide)

Linear copolymers from N-isopropylacrylamide （NIPA）, acrylic acid （AA） and diacetone acrylamide （DAA） have been prepared. The effect of composition, ionic strength and pH on their lower critical solution temperature （LCST） has been investigated.

Acrylamide exposure impairs blood-cerebrospinal fluid barrier function

Previous studies show that chronic acrylamide exposure leads to central and peripheral neu- ropathy. However, the underlying mechanisms remained unclear. In this study, we examined the permeability of the blood-cerebrospinal fluid barrier, and its ability to secrete transthyretin and transport leptin of rats exposed to acrylamide for 7, 14, 21 or 28 days. Transthyretin levels in cerebrospinal fluid began to decline on day 7 after acrylamide exposure. The sodium fluorescein level in cerebrospinal fluid was increased on day 14 after exposure. Evans blue concentration in cerebrospinal fluid was increased and the cerebrospinal fluid/serum leptin ratio was decreased on days 21 and 28 after exposure. In comparison, the cerebrospinal fluid/serum albumin ratio was increased on day 28 after exposure. Our findings show that acrylamide exposure damages the blood-cerebrospinal fluid barrier and impairs secretory and transport functions. These changes may underlie acrylamide-induced neurotoxicity.

A Temperature-sensitive Hydrogel Refolding System: Preparation of Poly(N-isopropyl acrylamide) and Its Application in Lysozyme Refolding

Temperature-sensitive hydrogel—poly(N-isopropyl acrylamide) (PNIPA) was prepared and applied to protein refolding. PNIPA gel disks and gel particles were synthesized by the solution polymerization and inverse suspension polymerization respectively. The swelling kinetics of the gels was also studied. With these prepared PNIPA gels, the model protein lysozyme was renatured. Within 24h, PNIPA gel disks improved the yield of lysozyme activity by 49.3% from 3375.2U·mg^-1 to 5038.8U·mg^-1. With the addition of faster response PNIPA gel beads, the total lysozyme activity recovery was about 68.98% in 3h, as compared with 42.03% by simple batch dilution. The novel refolding system with PNIPA enables efficient refolding especially at high protein concentrations. Discussion about the mechanism revealed that when PNIPA gels were added into the refolding buffer, the hydrophobic interactions between denatured proteins and polymer gels could prevent the aggregation of refolding intermediates, thus enhanced the protein renaturation.

PHOTO-INDUCED GRAFT POLYMERIZATION OF ACRYLAMIDE ON POLYPROPYLENE MEMBRANE SURFACE IN THE PRESENCE OF DIBENZYL TRITHIOCARBONATE

Ultraviolet （UV）-induced graft polymerization of acrylamide （AAm） on polypropylene substrates was successfully conducted using dibenzyl trithiocarbonate （DBTTC） as photoinitiator. It was confirmed by chemical analysis and surface morphology observation with attenuated total reflectance Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. A possible mechanism for this graft process was presented, which suggested that, under UV irradiation, the C： S bond in DBTTC could split and abstract a hydrogen from the polypropylene surface and a surface free radical was then formed, and initiated the graft polymerization of AAm.

Influence of acrylamide monomer addition to the acrylic denture-base resins on mechanical and physical properties

The aim of the study was to evaluate the effect of adding acrylamide monomer （AAm） on the characterization, flexural strength, flexural modulus and thermal degradation temperature of poly（methyl methacrylate） （PMMA） denture-base resins. Specimens （n= 10） were fabricated from a conventional heat-activated QC-20 （Qc-） and a microwave heat-activated Acron MC （Ac-） PMMA resins. Powder/ liquid ratio followed the manufacturer＇s instructions for the control groups （Qc-c and Ac-c） and for the copolymer groups, the resins were prepared with 5% （-5）, 10% （- 10）, 15% （- 15） and 20% （-20） acrylamide contents, according to the molecular weight ratio, respectively. The flexural strength and flexural modulus were measured by a three-point bending test. The data obtained were statistically analyzed by Kruskal-Wallis test （a=O.05） to determine significant differences between the groups, The chemical structures of the resins were characterized by the nuclear magnetic resonance spectroscopy. Thermal stabilities were determined by thermogravimetric analysis （TGA） with a heating rate of 10 ~C.min-1 from 35 ~C to 600 ~C. Control groups from both acrylic resins showed the lowest flexural strength values. Qc-15 showed significant increase in the flexural strength when compared to Qc-c （P〈O.01）. Ac-10 and Ac-15 showed significance when compared to Ac-c （P〈O.01）. Acrylamide incorporation increased the elastic modulus in Qc-10, Qc-15 and Qc-20 when compared to Qc-c （P〈0.01）. Also significant increase was observed in Ac-10, Ac-15 and Ac-20 copolymer groups when compared to Ac-c （P〈0.01）. According to the 1H-nuclear magnetic resonance （NMR） results, acrylamide copolymerization was confirmed in the experimental groups. TGA results showed that the thermal stability of PMMA is increased by the insertion of AAm.

Radiation graft of acrylamide onto polyethylene separators for lithium-ion batteries

To improve the affinity between separators and electrolyte in lithium-ion battery,microporous polyethylene(PE) separator was grafted of polyacrylamide(PAAm) by radiation.Chemical structure of the PAAmgrafted PE separators(denoted as PE-g-PAAm) was characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy.Properties of the pristine PE and PE-g-PAAm were tested by scanning electron microscope,liquid electrolyte uptake and lithium-ion conductivity.Electrochemical performances of the grafted PE separators(up to 0.76 × 10^(-3) S/cm of ionic conductivity at room temperature) were much better than pristine PE,and performance of the battery with the grafted separator behaved better than with the virgin PE separator,under the same condition(assembled in Ar-filled glove box).

Molecular Dynamics Study of Interaction between Acrylamide Copolymers and Alumina Crystal

Four acrylamide polymer flocculants, anionic polyacrylamide P（AA-co-AM）, cationic poly- acrylamide P（DMB-co-AM）, nonionic polyacrylamide P（AM）, and hydrophobical polyacry- lamide P（OA-co-AM） have been prepared by copolymerizing with acrylic acid, cationic monomer dimethylethyl （acryloxyethyl） ammonium bromide （DMB） and hydrophobical monomer octadecyl acrylate with acrylamide. The interactions between the flocculants with the （012） surface of alumina crystal （A1203） have been simulated by molecular dynamics method. All the polymers can bind tightly with A1203 crystal, the interaction between the O of polymers and A1 of the （012） surface of A1203 is significantly strong. The order of binding energy is as follows： P（DMB-co-AM）〉P（OA-co-AM）〉P（AA-co-AM）〉P（AM）, implying a better flocculation performance of P（DMB-co-AM） than the others. Analy- sis indicates that binding energy is mainly determined by Coulomb interaction. Bonds are found between the O atoms of the polymers and the A1 atoms of A1203. The poly- mers＇ structures deform when they combine with A1203 crystal, but the deformation en- ergies are low and far less than non-bonding energies. Flocculation experiments in sus- pension medium of l%Kaolin show a transmittancy of 90.8% for 6 mg/L P（DMB-co-AM） and 73.0% for P（AM）. The sequence of flocculation performance of four polymers is P（DMB-co-AM）〉P（OA-co-AM）〉P（AA-co-AM）〉P（AM）, which is in excellent agreement with the simulation results of binding energy.