The bi-functional carbazole-based photorefractive polyphosphazenes with different content of C_（60）-doped were fabricated. The glass transition temperature（T_g） of these polymer composite materials was determined ...The bi-functional carbazole-based photorefractive polyphosphazenes with different content of C_（60）-doped were fabricated. The glass transition temperature（T_g） of these polymer composite materials was determined using a differential scanning calorimetric（DSC） method. According to the DSC measurement results with different heating rates, the variation of T_g and the active energy of glass transition（E_g） were analyzed in detail. The analysis results indicate that the transition region shifts to higher temperatures with increasing heating rate, and C_（60） content（below 1.0 wt%） can influence the T_g of photorefractive polyphosphazenes. The T_g first increases and then decreases with the C_（60） content（below 1.0 wt%）. The probable causes of the influence of C_（60） on T_g was proposed.展开更多
A novel epoxy-imide resin based on diglycidyl ether of bisphenol-A and N-（4-hydroxyphenyl）terahydrophthalic anhydrideimide（HTAM） was synthesized. The structural characterization of the epoxy-imide resin was conduc...A novel epoxy-imide resin based on diglycidyl ether of bisphenol-A and N-（4-hydroxyphenyl）terahydrophthalic anhydrideimide（HTAM） was synthesized. The structural characterization of the epoxy-imide resin was conducted by FT-IR spectra. 4,4＇-diaminodiphneylmethane（DDM） was used as a curing agent for the epoxy-imide resin. The thermal properties of the cured resin were evaluated with dynamic mechanical analyses（DMA） and thermogravimetric analysis（TGA）. The results showed that the cured resin exhibited a high glass transition temperature（Tg） of 186 ℃ when the molar amount of HTAM was 0.04 mol in the resin. The yields of the cured resin at 800 ℃ raised from 16.45% to 19.41%. The flexural properties were also measured, the flexural strength raised from 79.4 to 95.7 MPa, and the flexural modulus exhibited from 2.6 to 3.0 GPa.展开更多
基金the National Science Foundation of China(No.11174258)the Development Foundation of China Academy of Engineering Physics(No.2013A0302016)
文摘The bi-functional carbazole-based photorefractive polyphosphazenes with different content of C_（60）-doped were fabricated. The glass transition temperature（T_g） of these polymer composite materials was determined using a differential scanning calorimetric（DSC） method. According to the DSC measurement results with different heating rates, the variation of T_g and the active energy of glass transition（E_g） were analyzed in detail. The analysis results indicate that the transition region shifts to higher temperatures with increasing heating rate, and C_（60） content（below 1.0 wt%） can influence the T_g of photorefractive polyphosphazenes. The T_g first increases and then decreases with the C_（60） content（below 1.0 wt%）. The probable causes of the influence of C_（60） on T_g was proposed.
基金Funded by the National Natural Science Foundation of China(No.51572205)the National Natural Science Foundation of Hubei Province,China(No.2014CFB854)the Equipment Pre-Research Joint Fund of EDD and MOE(No.6141A02033209)
文摘A novel epoxy-imide resin based on diglycidyl ether of bisphenol-A and N-（4-hydroxyphenyl）terahydrophthalic anhydrideimide（HTAM） was synthesized. The structural characterization of the epoxy-imide resin was conducted by FT-IR spectra. 4,4＇-diaminodiphneylmethane（DDM） was used as a curing agent for the epoxy-imide resin. The thermal properties of the cured resin were evaluated with dynamic mechanical analyses（DMA） and thermogravimetric analysis（TGA）. The results showed that the cured resin exhibited a high glass transition temperature（Tg） of 186 ℃ when the molar amount of HTAM was 0.04 mol in the resin. The yields of the cured resin at 800 ℃ raised from 16.45% to 19.41%. The flexural properties were also measured, the flexural strength raised from 79.4 to 95.7 MPa, and the flexural modulus exhibited from 2.6 to 3.0 GPa.
