KINETICS OF DEPOSITION OF METAL IONS TO ACTIVATED CARBON FIBERS (ACFs) WITH FLUIDIZATION

The diffusion and mass transfer, reaction, integration and growth processes of the metal ions on the activated carbon fibers (ACFs) are discussed. Based on the diffusion film theory, the diffusion and the integration model are developed to describe the deposition processes of metal ions from the solution to ACFs in the fluidized beds. The model of heat transfer of this process is established to expound the important role-played in deposition processes by the influence of the reaction heat released at ACFs surface and the non-uniform temperature distribution caused by hydrodynamics.

Preparation and Characterization of Activated Carbon Fiber from Paper

Activated carbon fibers （ACFS） with surface area of 1388 m2/g prepared from paper by chemical activation with KOH has been utilized as the adsorbent for the removal of methylene blue from aqueous solution. The experimental data were analyzed by Langmuir and Freundlich models of adsorption. The effects of pH value on the adsorption capacity of ACFS were also investigated. The rates of adsorption were found to conform to the kinetic model of Pseudo-second-order equation with high values of the correlation coefficients （R〉0.998）. The Langmuir isotherm was found to fit the experimental data better than the Feundlich isotherm over the whole concentration range. Maximum adsorption capacity of 520 mg/g at equilibrium was achieved. It was found that pH played a major role in the adsorption process, higher pH value favored the adsorption of MB.

Modification of Activated Carbon Fiber by Loading Metals and Their Performance on SO2 Removal

Metal-loaded activated carbon fibers （ACFs） were prepared by impregnation and characterized by N2 adsorption at 77K, XRD, XPS and SEM. Their properties on SO2 removal were examined in a tubular fixed bed reactor with a model flue gas. Cobalt-loaded ACF showed the best activity among the prepared metal-loaded ACFs and a constant removal ratio of SO2 above 87% during continuous exposure to the flow of SO2/O2/H2O/N2 at 45℃ for more than 216h. The characteristic of the prepared loaded-ACFs showed that the exceptional activity of Co-ACF was attributed to the high amount of active sites due to modification by loading cobalt.

Adsorption onto Activated Carbon Fiber Cloth and Electrothermal Desorption of Volatile Organic Compound(VOCs):A Specific Review

A general research program, focusing on activated carbon fiber cloths （ACFC） and felt for environmental protection was performed. The objectives were multiple： （i） a better understanding of the adsorption mecha- nisms of these kinds of materials; （ii） the specification and optimization of new processes using these adsorbents; （iii） the modeling of the adsorption of organic pollutants using both the usual and original approaches; （iv） applications of ACFC in industrial processes. The general question was： how can activated carbon fiber cloths and felts be used in air treatment processes for the protection of environment. In order to provide an answer, different approaches were adopted. The materials （ACFC） were characterized in terms of macro structure and internal porosity. Specific studies were performed to get the air flow pattern through the fabrics. Head loss data were generated and modeled as a fi.mction of air velocity. The performances of ACF to remove volatile organic compounds （VOCs） were approached with the adsorption isotherms and breakthrough curves in various operating conditions. Regenera- tion by Joule effect shows a homogenous heating of adsorber modules with rolled or pleated layers. Examples of industrial developments were presented showing an interesting technology for the removal of VOCs, such as dichloromethane, benzene, isopropyl alcohol and toluene, alone or in a complex mixture.

Activated carbon fibers with manganese dioxide coating for flexible fiber supercapacitors with high capacitive performance

Fiber supercapacitor(FSC)is a promising power source for wearable/stretchable electronics and high capacitive performance of FSCs is highly desirable for practice flexible applications.Here,we report a composite of manganese dioxide(Mn O_2)and activated carbon fibers(ACFs)with high MnO_2mass loading and microporous structure(abbreviated as Mn O_2@ACF),which is used as a fiber electrode to produce a FSC with a high capacitive performance and a good flexibility.The MnO_2@ACF composite electrode in FSCs delivers an ultrahigh specific capacitance of 410 mF/cm^2at 0.1 mA/cm^2,corresponding to a high energy density of 36μWh/cm^2and high power density of 726μW/cm^2.Such high capacitive performance and simple fabrication method indicates that the Mn O_2@ACF composite is a very promising electrode material for flexible fiber supercapacitors.

Gas phase tricholoethylene removal at low concentration using activated carbon fiber

The breakthrough adsorption behaviors of gas phase trichloroethylene in a packed bed of activated carbon fibers(ACF) were investigated. The specific surface area of the ACF was 600 m 2/g, 1400 m 2/g and 1600 m 2/g, respectively, and the concentration of trichloroethylene ranged from 270 mg/m 3 to 2700 mg/m 3. Results showed that the capacity of adsorption increased with increasing specific surface area, the relationship between the logarithms of 10% breakthrough time and concentration was approximately linear over the experimental range, the breakthrough time decreased with increasing temperature and humidity. The breakthrough curves at different inlet concentration or different temperature can be predicted by several simple theoretical models with good agreements.

Adsorption characteristics of carbon tetrachloride from aqueous solution onto polyacrylonitrile-based activated carbon fiber

The isotherm,mechanism and kinetics of carbon tetrachloride(CT) adsorption by polyacrylonitrile-based activated carbon fiber(PAN-ACF) were investigated in batch reactors and a continuous flow reactor,and the regeneration of PAN-ACF was also studied.Freundlich and Dubinin-Radushkevich(D-R) adsorption equations can well describe the adsorption isotherm.CT is mainly adsorbed on the exterior surface of PAN-ACF with low boundary layer effect and rate-controlling step of intra-particle diffusion.The adsorption dynamics in the batch reactor well fits with the pseudo-first-order model,and the breakthrough curves in the continuous flow reactor can be well described by the Yoon-Nelson model.The ACF can be recycled through thermal regeneration,whereas the adsorption capacity decreases from 7.87 to 4.98 mg/g after the fourth regeneration.78%-94%of CT can be removed from the wastewater of a fluorine chemical plant on a pilot scale,which confirms the efficacy of ACF under industrial conditions.The results indicate that PAN-ACF is applicable to CT removal from wastewater.

Analysis of α, β, γ-hexachlorocyclohexanes in water by novel activated carbon fiber-solid phase microextraction coupled with gas chromatography—mass spectrometry

A fast and simple method for determination of α, β, γ-hexachlorocyclohexanes (HCHs) in water using activated carbon fiber-solid phase microextraction(ACF-SPME) were studied. Results showed the performance of adsorption and desorption of three HCHs on ACF were excellent. A wide linear range from 10 to 100 μg/L and detection limits of the ng/L level were obtained using ACF-SPME with GC-MS in selected ion monitoring(SIM) acquisition mode. The proposed method was also successfully applied for determination of three HCHs in tap water. Compared to commercial fibers, ACF showed some advantages such as better resistance to solvents, higher thermal stability, longer lifetime and lower cost. The data demonstrated that GC-MS with ACF-SPME is well suitable for the analysis of HCHs in water.

Plasma Modification of Activated Carbon Fibers for Adsorption of SO_2

Viscose-based activated carbon fibers （VACFs） were treated by a dielectric-barrier discharge plasma under the feed gas of N2. The surface functional groups of VACFs were modified to improve the adsorption and catalysis capacity for SO2. The surface properties of the untreated and plasma-treated VACFs were diagnosed by SEM, BET, FTIR, and XPS, and the adsorption capacities of VACFs for SO2 were also compared and discussed. The results show that after the plasma treatment, the external surface of VACFs was etched and became rougher, while the surface area and the total pore volume decreased. FTIR and XPS revealed that nitrogen atoms were introduced onto the VACFs surface and the distribution of functional groups on the VACFs surface was changed remarkably. The adsorption characteristic of SO2 indicates that the plasmatreated VACFs have better adsorption capacity than the original VACFs due to the nitrogen functional groups and new functional groups formed in modification, which is beneficial to the adsorption of SO2.

A Study on the Surface Structures of Viscose-based Activated Carbon Fiber by FT-IR Spectroscopy and XPS

Using viscose fiber (VF) as starting material and common steam as activating agent, formation of oxygen structures in activated carbon fiber is investigated. In the preparation of samples, VF was first heated at temperatures between 450℃ and 900℃ in N_2 artmosphere. Then, in a successive activation stage, the product carbonized at 600℃ was activated in steam at 450-900℃ for 30 min, and at 600℃ for 5-30 min. The other carbonization products were activated at 600 and 900℃ for 30 min respectively. The products activated at 900℃ were then activated at 450℃ for 30 min again. The starting materiah carbonized products and all activation products were examined by FT-IR spectroscopy and some products were examined by X-ray photoelectron spectroscope (XPS). And the yields of the carbonized and activated products were calculated. By analysing these spectra, the amount of oxygen-containing functional groups of the activated products attained under various activation time, various activation temperature and various previous carbonization temperature was determined.

Catalytic Effect of Activated Carbon and Activated Carbon Fiber in Non-Equilibrium Plasma-Based Water Treatment

Catalysis and regeneration efficiency of granular activated carbon （GAC） and activated carbon fiber （ACF） were investigated in a non-equilibrium plasma water treatment reactor with a combination of pulsed streamer discharge and GAC or ACF. The experimental results show that the degradation efficiency of methyl orange （MO） by the combined treatment can increase 22% （for GAC） and 24% （for ACF） respectively compared to pulsed discharge treatment alone, indicating that the combined treatment has a synergetic effect. The MO degradation efficiency by the combined treatment with pulsed discharge and saturated GAC or ACF can increase 12% and 17% respectively compared to pulsed discharge treatment alone. Both GAC and ACF show catalysis and the catalysis of ACF is prominent. Meanwhile, the regeneration of GAC and ACF are realized in this process. When H202 is introduced into the system, the utilization efficiency of ozone and ultraviolet light is improved and the regeneration efficiency of GAC and ACF is also increased.

Effects of Pre-oxidation Conditions on Adsorption Performance of Activated Carbon Fibers

In order to investigate the effects of pre-oxidation conditions on adsorption performance of activated carbon fibers （ ACFs ）, electrospun polyacrylonitrile （ PAN ） fiber webs were adopted as precursors for preparing ACFs. Firstly, the webs were stabilized under different pre-oxidation conditions; secondly, the pre-oxidative fibers were chemically activated by high temperature treatment in nitrogen. Pre-oxidation temperature, heating rate, and treatment time are the main factors on affecting the adsorption performance of the ACFs. Scanning electron microscope （ SEM）, differential scanning calorimeter （DSC）, and Fourier transform infrared spectroscopy （FTIR） were used to characterize the structure and property of the pre-oxldatlve fibers, and the dynamic benzene adsorption capacity of benzene of ACFs was measured. The results indicate that the moderate pre-oxidation condition is necessary to prepare the ACFs with better adsorption capacity, and the optimal oxidation conditions are to increase from room temperature to 230 ~C with a heating rate of 0.75 ~C ~ min -1 held at the peak temperature for 30min.

STUDY ON THE PROPERTIES OF DIFFERENT ACTIVATED CARBON FIBERS AND THEIR ADSORPTION CHARACTERISTICS FOR FORMALDEHYDE

Porous structure and surface chemistry of activated carbon fibers obtained by differ-ent precursors and activation methods were investigated. Adsorption isotherms werecharacterized by nitrogen adsorption at 77K over a relative pressure range from 10 6to 1. The regularization method according to Density Functional Theory (DFT) wasemployed to calculate the pore size distribution in the samples. Their specific surfaceareas were calculated by BET method, micropore volume and microporous specificsurface area calculated by t-plot method and MPD by Horvath-Kawazoe equation. Mi-cropore volume of rayon-based ACF was higher than that of other samples. The staticand dynamic adsorption capacity for formaldehyde on different ACFs was determined.The results show that steam activated Rayon-based A CFs had higher adsorption capac-ity than that of steam and KOH activated PAN-A CFs. Breakthrough curves illustratedthat Rayon-ACFs had longer breakthrough time, thus they possessed higher adsorp-tion capacity for formaldehyde than that of PAN-ACFs. The entire sample had smalladsorption capacity and short breakthrough time for water. Rayon-A CFs had exccl-lent adsorption selectivity for formaldehyde than PAN-ACFs. And the samples withhigh surface areas had relatively high adsorption capacity for formaldehyde. Elementaicontent of different A CFs were performed. Rayon-based A CFs contained more oxygenthan PAN-ACFs, which may be attributed to their excellent adsorption capacity forformaldehyde.

Fibrous TiO_2 prepared by chemical vapor deposition using activated carbon fibers as template via adsorption,hydrolysis and calcinations

TiO2 fibers were prepared via alternatively introducing water vapor and Ti precursor carried by N2 to an APCVD （chemical vapor deposition under atmospheric pressure） reactor at ≤200 ℃. Activated carbon fibers （ACFs） were used as templates for deposition and later removed by calcinations. The obtained catalysts were characterized by scanning electron micros- copy （SEM）, transmission electron microscopy （TEM）, Brunauer, Emmett and Teller （BET） and X-ray diffraction （XRD） analysis The pores within TiO2 fibers included micro-range and meso-range, e.g., 7 nm, and the specific surface areas for TiO2 fibers were 141 m^2/g and 148 m^2/g for samples deposited at 100 ℃ and 200℃ （using ACFI700 as template）, respectively. The deposition temperature significantly influenced TiO2 morphology. The special advantages of this technique for preparing porous nano-material include no consumption of organic solvent in the process and easy control of deposition conditions and speeds.

Construction of Hierarchical Nanostructured N-doped TiO2 Immobilized Activated Carbon Fiber Porous Composites for Toluene Removal

The hierarchical nanostructured N-doped TiO2 immobilized activated carbon fiber(N-TiO2/ACF)porous composites are fabricated to removal dynamic toluene gas.The results show that nitrogen ions doping and ACF modification can decrease the band gap of TiO2,leading to red shift toward visible light region.Interestingly,N-TiO2/ACF exhibits strongly synergistic effect owing to high surface area,good crystallinity,enhanced bandgap structure and light harvesting.The toluene removal rate of N-TiO2/ACF composites is 2.29 times higher than that of TiO2.The N-TiO2/ACF for toluene degradation followed the Langmuir-Hinshelwood kinetic model,and the rate constant is enhanced 8 times compared with TiO2.The possible photodegradation pathway and mechanisms are proposed.

MOFs负载ACF吸附剂的制备及H_(2)S脱除特性

将活性炭纤维(ACF)负载到金属有机框架材料MOF-199上,在水热条件下制备了MOF-199@ACF吸附剂,利用固定床反应装置评价其脱H_(2)S性能;采用氮气吸/脱附、XRD、EDS、SEM、XPS表征和分析了MOF-199@ACF的物相组成;考察了ACF负载量、吸附温度、相对湿度对MOF-199@ACF脱除H_(2)S性能的影响,探究了MOF-199@ACF在H_(2)S脱除中可能的反应机理。结果表明,与MOF-199相比,ACF负载量(质量分数)为1%的吸附剂MOF-199@1%ACF的H_(2)S出现时间从180 min延后至405 min,穿透硫容从7.2 mg/g提升至14.5 mg/g;ACF负载量为1%不会干扰MOF-199结晶形成的稳定结构,ACF参与配位使MOF-199@1%ACF表面粗糙化,导致更多的吸附位点暴露,增加了比表面积(从MOF-199的1108.6 m^(2)/g增至1978.3 m^(2)/g);MOF-199@1%ACF是以化学吸附的活化吸附为主,升高温度(30~70℃)有利于加快吸附速率;适量水气(相对湿度10%)有助于性能提升(穿透硫容14.8 mg/g)。

γ-Al_(2)O_(3)/CuO-ACF电吸附除盐的影响因素及反应动力学

开发脱盐率高、寿命长的电极材料是电容去离子(CDI)水处理技术的研究热点之一。通过一锅水热法将层状CuAl双金属氧化物与活性碳纤维复合,成功制备了CDI电极(γ-Al_(2)O_(3)/CuO-ACF)。采用SEM、XRD、FTIR和CV测试对样品的形貌、结构和电极性能进行了表征。当初始NaCl浓度为500mg/L时,随着电压从0.8V逐渐增加到1.6V,两种电极的比吸附量、脱盐效率、电流效率和电耗均有所增加,γ-Al_(2)O_(3)/CuO-ACF的四项参数依次比ACF提高23.4%~55.3%、44.8%~82.0%、65.5%~90.0%和降低15.0%~21.4%。当腐殖酸浓度为5~10mg/L时,ACF脱盐效率下降明显,而γ-Al_(2)O_(3)/CuO-ACF脱盐效率仅在腐殖酸浓度10mg/L时略有下降。在15次循环后,NaCl溶液体系的脱盐效率保留率为96%;但由于腐殖酸的存在,该值下降为92%。两种电极的电吸附除盐过程遵循Langmuir等温吸附方程,表示盐离子在电极表面为单分子层物理吸附。与传统ACF电极相比,γ-Al_(2)O_(3)/CuO-ACF电极具有优异的可回收性、稳定性和增强的电化学特性。

Structural Performance and Characterization of Polyimide Doped Activated Carbon Fibers for Mercury Adsorption

Structure characteristics about activated carbon fibers (ACF) and polyimide (P84) doped ACF modified by HNO3 solution were studied to apply in mercury removal in coal-fired flue gases. The P84, which was always used in the non-woven fabric for bag filter, was intermingled with polyacrylonitrile-based ACF (PAN-ACF) in the weight ratio of 1∶1 in order to make the doped ACF with P84 (doped-ACF-P84). Then the doped-ACF-P84 fibers were modified by HNO3 solution. The structure and morphology of doped-ACF-P84 were characterized and compared with those of ACF and doped-ACF-P84 modified by HNO3solution. The results show that the modified doped-ACF-P84 fibers have almost the same pore structure and specific surface area comparing with the original one. However, contrasted with the original PAN-ACF, the doped-ACF-P84 fibers modified by HNO3 solution have more oxygen-containing groups used for mercury removal. In particular, they have more lactone and carboxyl groups.