Commercial spherical activated carbon(SAC) was modified by impregnation to enhance the catalytic properties of SAC in acetylene hydrochlorination through melamine modification. Different modification conditions for ...Commercial spherical activated carbon(SAC) was modified by impregnation to enhance the catalytic properties of SAC in acetylene hydrochlorination through melamine modification. Different modification conditions for SAC with nitrogen were compared by changing the SAC-Melamine ratios. The effect of carbonization temperature on the modification was also investigated. Surface chemistry and adsorption properties of the modified and unmodified SACs were studied by scanning electron microscope(SEM), X-ray photoelectron spectroscopy(XPS), elementary analysis, BET, and temperature-programmed desorption(TPD). Moreover, the catalytic properties of SAC in acetylene hydrochlorination under differently modified conditions were also investigated. Elemental analysis showed that the nitrogen content of the modified SAC was greatly improved. XPS revealed that nitrogen mainly exists in Pyrrole nitrogen and Pyridine nitrogen. TPD showed that desorption of C2H2 was changed by modification. The conversion rate of acetylene was up to 70% under the following reaction conditions: temperature, 150 ℃; C2H2 hourly space velocity(GHSV), 36 h-1; feed volume ratio V(HCl)/V(C2H2) = 1.15. The catalytic properties of SAC were improved significantly via melamine modification.展开更多
1 Introduction In recent years porous carbons have been widely used in many fields such as energy storage(Mc Creery,2008;Liu et al,2009;Ho et al,2014;Yang et al,2015),adsorption,wastewater treatment,air purification
TiO2-loaded activated carbon fibers (ACF) were prepared by a hydrothermal method. The samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR...TiO2-loaded activated carbon fibers (ACF) were prepared by a hydrothermal method. The samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectrometry and UV-vis diffuse reflectance spectra (DRS). SEM images showed that the TiO2 nanoparticles were deposited on the surface of ACF, and the particle size and loading amount of TiO2 were varied by changing the initial concentration of tetrabutyl titanate (TBOT). The results of an ash experiment showed that the loading amounts of TiO2 were 18.4%, 43.3%, 52.5%, 75.1%, and 91.1% for initial concentrations of TBOT of 0.07,014, 0.21,0.28, and 0.35 tool/L, respectively, Physical interactions played an important role in the formation of TiO2/ACF composite fibers that absorb UV and visible light. Compared with those of ACF, improved adsorption and photocatalytic activity toward Rhodamine B (RhB) were observed for TiO2/ACF composite fiber. The Rhodamine B could be removed efficiently by TiO2/ACF composite fibers, and the TiO2 loading amount had a significant effect on the photocatalytic activity of TiO2/ACF composite fibers.展开更多
基金Funded by the National Basic Research Program of China(973 Program,2012CB720302)the Program for Changjiang Scholars and Innovative Research Team in University(No.IRT1161)the Corps Science and Technology Innovation Team Scheme(2011CC001)
文摘Commercial spherical activated carbon(SAC) was modified by impregnation to enhance the catalytic properties of SAC in acetylene hydrochlorination through melamine modification. Different modification conditions for SAC with nitrogen were compared by changing the SAC-Melamine ratios. The effect of carbonization temperature on the modification was also investigated. Surface chemistry and adsorption properties of the modified and unmodified SACs were studied by scanning electron microscope(SEM), X-ray photoelectron spectroscopy(XPS), elementary analysis, BET, and temperature-programmed desorption(TPD). Moreover, the catalytic properties of SAC in acetylene hydrochlorination under differently modified conditions were also investigated. Elemental analysis showed that the nitrogen content of the modified SAC was greatly improved. XPS revealed that nitrogen mainly exists in Pyrrole nitrogen and Pyridine nitrogen. TPD showed that desorption of C2H2 was changed by modification. The conversion rate of acetylene was up to 70% under the following reaction conditions: temperature, 150 ℃; C2H2 hourly space velocity(GHSV), 36 h-1; feed volume ratio V(HCl)/V(C2H2) = 1.15. The catalytic properties of SAC were improved significantly via melamine modification.
基金financial support from the National Natural Science Foundation of China (51274015)National Program on Key Basic Research Project (973 Program) (2014CB846000)Test Fund of Peking University
文摘1 Introduction In recent years porous carbons have been widely used in many fields such as energy storage(Mc Creery,2008;Liu et al,2009;Ho et al,2014;Yang et al,2015),adsorption,wastewater treatment,air purification
基金financial support of the National Natural Science Foundation of China(No.21103017No.51104042)the Fundamental Research Funds for the Central Universities(No.110405007)
文摘TiO2-loaded activated carbon fibers (ACF) were prepared by a hydrothermal method. The samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectrometry and UV-vis diffuse reflectance spectra (DRS). SEM images showed that the TiO2 nanoparticles were deposited on the surface of ACF, and the particle size and loading amount of TiO2 were varied by changing the initial concentration of tetrabutyl titanate (TBOT). The results of an ash experiment showed that the loading amounts of TiO2 were 18.4%, 43.3%, 52.5%, 75.1%, and 91.1% for initial concentrations of TBOT of 0.07,014, 0.21,0.28, and 0.35 tool/L, respectively, Physical interactions played an important role in the formation of TiO2/ACF composite fibers that absorb UV and visible light. Compared with those of ACF, improved adsorption and photocatalytic activity toward Rhodamine B (RhB) were observed for TiO2/ACF composite fiber. The Rhodamine B could be removed efficiently by TiO2/ACF composite fibers, and the TiO2 loading amount had a significant effect on the photocatalytic activity of TiO2/ACF composite fibers.