In this study,the Heishan coal was used to prepare a series of activated carbon(AC)samples via a vapor deposition method.The effects of the Fe(NO_(3))3/coal weight ratio on the physicochemical properties of the activa...In this study,the Heishan coal was used to prepare a series of activated carbon(AC)samples via a vapor deposition method.The effects of the Fe(NO_(3))3/coal weight ratio on the physicochemical properties of the activated carbon were systematically investigated,and the AC samples were analyzed by the N2 adsorption-desorption technique,the scanning electron microscopy,the X-ray diffraction,the Raman spectroscopy,and the Fourier transform infrared spectroscopy.Furthermore,the adsorption properties of ethyl acetate were investigated.The results indicated that as the Fe(NO_(3))3/coal mass ratio increased from 1:8 to 1:2,the specific surface area,the total pore volume and the micropore volume initially increased and then decreased.The specific surface area increased from 560.86 m^(2)/g to 685.90 m^(2)/g,and then decreased to 299.56 m^(2)/g.The total pore volume and micropore volume increased from 0.29 cm^(3)/g and 0.17 cm^(3)/g to 0.30 cm^(3)/g and 0.22 cm^(3)/g,and then decreased to 0.16 cm^(3)/g and 0.10 cm^(3)/g,respectively.The optimized ratio was 1:8.During the activation process,iron ions infiltrated the activated carbon to promote the development of the pore structure,the pore size of which was between 2.5 nm and 3 nm in daimeter.This approach could enhance the capacity for adsorption of ethyl acetate.It is worth noting that the ACs displaying the largest specific surface area and total pore volume(685.90 m^(2)/g and 0.30 cm^(3)/g)were formed under the optimized activation conditions(950℃,20%(volume)of CO_(2),ratio 1:5),and the maximum AC capacity for adsorption of ethyl acetate was 962.62 mg/g.After seven repeated thermal regeneration experiments,the saturated AC adsorption capacity was still above 90%.展开更多
We prepared a kind of metal oxide-modified walnut-shell activated carbon(MWAC) by KOH chemical activation method and used for PH_3 adsorption removal. Meanwhile, the PH_3 adsorption equilibrium was investigated experi...We prepared a kind of metal oxide-modified walnut-shell activated carbon(MWAC) by KOH chemical activation method and used for PH_3 adsorption removal. Meanwhile, the PH_3 adsorption equilibrium was investigated experimentally and fitted by the Toth equation, and the isosteric heat of PH_3 adsorption was calculated by the Clausius-Clapeyron Equation. The exhausted MWAC was regenerated by water washing and air drying. Moreover, the properties of five different samples were characterized by N_2 adsorption isotherm, SEM/EDS, XPS, and FTIR. The results showed that the maximum PH_3 equilibrium adsorption capacity was 595.56 mg/g. The MWAC had an energetically heterogeneous surface due to values of isosteric heat of adsorption ranging from 43 to 90 kJ/mol. The regeneration method provided an effective way for both adsorption species recycling and exhausted carbon regeneration. The high removal efficiency and big equilibrium adsorption capacity for PH_3 adsorption on the MWAC were related to its large surface area and high oxidation activity in PH_3 adsorption-oxidation to H_3 PO_4 and P_2 O_5. Furthermore, a possible PH_3 adsorption mechanism was proposed.展开更多
An experimental study of the adsorption performances of NH3 on several commercial activated carbons was described. Firstly, the specific surface area, pore size distribution and morphological structure of the activate...An experimental study of the adsorption performances of NH3 on several commercial activated carbons was described. Firstly, the specific surface area, pore size distribution and morphological structure of the activated carbons have been characterized by N2 adsorption, Scanning Electron Microscope (SEM), and X-ray diffraction (XRD). The adsorption capacities of four kinds of activated carbons were compared based on adsorption isotherms at 30℃. Results show that a type of activated carbon MSC30 with high adsorption capacity of NH3 is a promising adsorbent for NH3 because of its large specific surface area and high pore volume. Secondly, the effect of adsorption temperature on the adsorption capacity of NH3 on MSC30 was investigated. A modified Dubinin-Astakhov equation was employed to describe the adsorption isotherms, with the reliability and accuracy evaluation. The isosteric heat of adsorption of MSC30-NH3 as a function of the amount adsorbed was calculated applying the Clausius-Clapeyron equation with isotherms obtained at 20℃ and 30℃. Thirdly, a packed-bed type adsorber was used to evaluate the influence of cycle time on the system cooling performance (coefficient of performance, specific cooling performance, and volumetric cooling performance) of the MSC30-NH3 pair at the evaporating temperatures of 5℃, 10℃ and 15℃ with a fixed adsorption/condensing temperature and desorption temperature of 30?C and 80℃, respectively. Finally, a long term operation without degradation for MSC30-NH3 adsorption was experimentally demonstrated from the 80 consecutive adsorption-desorption cycles.展开更多
A general research program, focusing on activated carbon fiber cloths (ACFC) and felt for environmental protection was performed. The objectives were multiple: (i) a better understanding of the adsorption mecha- ...A general research program, focusing on activated carbon fiber cloths (ACFC) and felt for environmental protection was performed. The objectives were multiple: (i) a better understanding of the adsorption mecha- nisms of these kinds of materials; (ii) the specification and optimization of new processes using these adsorbents; (iii) the modeling of the adsorption of organic pollutants using both the usual and original approaches; (iv) applications of ACFC in industrial processes. The general question was: how can activated carbon fiber cloths and felts be used in air treatment processes for the protection of environment. In order to provide an answer, different approaches were adopted. The materials (ACFC) were characterized in terms of macro structure and internal porosity. Specific studies were performed to get the air flow pattern through the fabrics. Head loss data were generated and modeled as a fi.mction of air velocity. The performances of ACF to remove volatile organic compounds (VOCs) were approached with the adsorption isotherms and breakthrough curves in various operating conditions. Regenera- tion by Joule effect shows a homogenous heating of adsorber modules with rolled or pleated layers. Examples of industrial developments were presented showing an interesting technology for the removal of VOCs, such as dichloromethane, benzene, isopropyl alcohol and toluene, alone or in a complex mixture.展开更多
Regenerated activated carbon(RAC)samples were prepared by carbon activation using waste activated carbon from solid waste resources as the carbon source precursor coupled with adding alkaline additives,and then were f...Regenerated activated carbon(RAC)samples were prepared by carbon activation using waste activated carbon from solid waste resources as the carbon source precursor coupled with adding alkaline additives,and then were further modified by potassium ferrate to finally prepare high-performance carbon for VOCs adsorption.At the same time,the samples before and after modification were systematically studied through characterization techniques such as SEM,Raman spectrometry,FT-IR,XPS,and dynamic/static adsorption.The results showed that the specific surface area and pore volume of the RAC after modification by the strong oxidant potassium ferrate increased by 1.4 times;the degree of defects was enhanced and the content of oxygen-containing functional groups on the surface increased significantly.Among them,the sample modified with potassium ferrate for 24 h had the best dynamic toluene adsorption performance(375.5 mg/g),and the dynamic adsorption capacity was twice that of the original sample(192.8 mg/g).The static adsorption test found that the maximum adsorption capacity of RAC-6%K_(2)FeO_(4)+H_(2)SO_(4)-24h was 796 mg/g,which indicated that the potassium ferrate modification treatment could significantly increase the VOCs adsorption performance of RAC.In addition,through consecutive toluene adsorption-desorption cycle tests,it was found that the RAC-6%K_(2)FeO_(4)+H_(2)SO_(4)-24h sample still retained 91%of adsorption activity after the fifth regeneration cycle.This indicates that RAC-6%K_(2)FeO_(4)+H_(2)SO_(4)-24h has good cycle stability and great application value for the efficient purification of industrial waste VOCs gas.展开更多
The study of the performances of regenerated activated carbons for the adsorption of MO(methyl orange)in an aqueous medium was carried out with the aim to evaluate the adsorption capacities of these activated carbons....The study of the performances of regenerated activated carbons for the adsorption of MO(methyl orange)in an aqueous medium was carried out with the aim to evaluate the adsorption capacities of these activated carbons.Three regenerated activated carbons issued from the unit of oil treatment of the thermal power station of Dibamba(Cameroon)-DPDC(Dibamba Power Development Company)were obtained thermally and chemically.These three samples(namely CAR 400℃(chemical regenerated activated carbon at 400℃),CAR 700℃(physical regenerated activated carbon at 700℃)and CAR 900℃(physical regenerated activated carbon at 900℃))and the non-used one CA were characterized by iodine number,XRD(X-ray Diffraction)and FTIR(Fourier-transform infrared spectroscopy).MO adsorption tests were performed in batch mode;this technique allowed the study of the influence of the parameters such as:the contact time,the initial’s MO concentration and the pH.Moreover,different kinetic models(first-order,pseudo-second-order and Webber and Morris intra-particle diffusion)and adsorption isotherms(Langmuir and Freundlich)are used for the evaluation of adsorption capacities.The physicochemical characterization of these adsorbents showed that they were micro-porous(iodine value:600 mg/g)and strongly crystallized according to their regeneration pathways.The influence of the parameters revealed that the adsorption of MO is the most favorable for concentrations from 5 to 25 mg/L(for materials CA and CAR 400℃)and 10 to 25 g/L(for materials CAR 700℃ and 900℃);and that it was maximum in acid medium(at pH=3 on the materials CA,CAR 400℃,CAR 900℃ and at pH=5 on the material CAR 900℃).The modeling of the adsorption kinetics of MO has revealed the conformity of the kinetic model of pseudosecond-order and intra-particle diffusion for some of these materials.The study of isotherms has shown that the Langmuir isotherm best describes the adsorption of MO on most of these adsorbents.展开更多
Effluents containing inorganic contaminants are releasing into the environment untreated despite being hazardous to man and environment. It is costly and unsustainable to use conventional methods to remove them from d...Effluents containing inorganic contaminants are releasing into the environment untreated despite being hazardous to man and environment. It is costly and unsustainable to use conventional methods to remove them from dilute aqueous solution. Adsorption involving granular activated carbon is an alternative method for treating such effluents. Granular activated carbon is structurally strong, highly resistance to attrition and wearing, large and can easily separate from the effluents. However, its surface is highly hydrophobic and has little surface charge thereby reducing its adsorption capacity for anion or cation. This article reviews surfactant modification of activated carbon to enhance its adsorption capacity for inorganic contaminants and key factors affecting the adsorption efficiency. They include initial concentration of contaminants, contact time, solution pH, solution temperature, adsorbent concentration, ionic strength, competing ions, type of surfactant, and surfactant concentration. The modified activated carbon usually shows maximum contaminant uptake around its critical micelles concentration. Surfactant modification reduces specific surface area and/or micro pore volume but hot NaOH or HNO3 treatment before surfactant modification minimises this drawbacks and increases the net surface charge. Overall, surfactant modification is a simple but efficient method of enhancing adsorption capacity of activated carbon for removing anion or cation from aqueous solution. However, a handful publication is available on the regeneration of the spent (saturated) surfactant modified activated carbons. Hence, more research efforts should be directed towards proper regenerating reagents and the optimise conditions such as contact time, concentration, and temperature for regenerating spent modified activated carbons.展开更多
The nitrogen adsorption isotherms at 77.69 K were measured for two samples of activated carbon fibers and their microstructures were investigated. Among established isotherm equations, the Dubinin-Radushkevieh equatio...The nitrogen adsorption isotherms at 77.69 K were measured for two samples of activated carbon fibers and their microstructures were investigated. Among established isotherm equations, the Dubinin-Radushkevieh equation showed the best agreement with the experimental data, while the Langmuir equation showed a large deviation when employed at low relative pressures. The MP method, t-method and as-method were used to analyze the pore size distribution. The calculated average pore widths and BET (Brunauer-Emmett-Teller) surface areas for the sample A-13 were 0.86 nm and 1 286.60 m^2/g, while for the sample A-16, they were 0.82 nm and 1 490.64 m^2/g. The sample with larger pore width was more suitable to be used as additive in chemical heat pumps, while the other one could be used as adsorbent in adsorption refrigeration systems .展开更多
There is an increased global demand for activated carbon(AC)in application of water treatment and purification.Water pollutants that have exhibited a greater removal efficiency by AC included but not limited to heavy ...There is an increased global demand for activated carbon(AC)in application of water treatment and purification.Water pollutants that have exhibited a greater removal efficiency by AC included but not limited to heavy metals,pharmaceuticals,pesticides,natural organic matter,disinfection by-products,and microplastics.Granular activated carbon(GAC)is mostly used in aqueous so-lutions and adsorption columns for water treatment.Commercial AC is not only costly,but also obtained from non-renewable sources.This has prompted the search for alternative renewable materials for AC production.Biomass wastes present a great potential of such materials because of their availability and carbonaceous nature.This in turn can reduce on the adverse environmental effects caused by poor disposal of these wastes.The challenges associated with biomass waste based GAC are their low strength and attrition resistance which make them easily disintegrate under aqueous phase.This paper provides a comprehensive review on recent advances in production of biomass waste based GAC for water treatment and highlights future research directions.Production parameters such as granulation conditions,use of binders,carbonization,activation methods,and their effect on textural properties are discussed.Factors influencing the adsorption capacities of the derived GACs,adsorption models,adsorption mechanisms,and their regeneration potentials are reviewed.The literature reveals that biomass waste materials can produce GAC for use in water treatment with possibilities of being regenerated.Nonetheless,there is a need to explore 1)the effect of preparation pathways on the adsorptive properties of biomass derived GAC,2)sustainable production of biomass derived GAC based on life cycle assessment and techno-economic analysis,and 3)adsorption mechanisms of GAC for removal of contaminants of emerging concerns such as microplastics and unregulated disinfection by-products.展开更多
Photo-responsive adsorption-photocatalysis nanocomposites are generally used in water and wastewater decontamination;however,the prolonged adsorption capacity of composites and the role of adsorption in concomitant ph...Photo-responsive adsorption-photocatalysis nanocomposites are generally used in water and wastewater decontamination;however,the prolonged adsorption capacity of composites and the role of adsorption in concomitant photocatalysis are typically neglected.These composites can be regenerated under light irradiation as their adsorption capacity decreases.Herein,a novel adsorption-photocatalysis bifunctional nanocomposite,Bi-doped TiO2 supported on powdered activated carbon(Bi2O3/TiO2/PAC),was prepared using the solimpregnation-hydrothermal procedure.Bi2O3/TiO2/PAC with a secondary calcination temperature of 700℃under a nitrogen atmosphere was selected for maximum adsorption capacity on Methyl Orange(MO).The composite displayed an excellent adsorption capacity and was easily separated and recycled.The results demonstrate that 71.2%photocatalytic regeneration efficiency could be attained under visible light irradiation for 1 hr at an intensity of 750 W/m^2 and pH 7.Characterization of the as-prepared Bi2O3/TiO2/PAC nanocomposite(700℃)indicates that it possesses a highly specific surface area and great optical properties,showing bifunctional adsorption-photocatalysis characteristics.The p-n heterojunction of the composite played a dominant role in the photocatalytic regeneration process,and effective degradation of MO could be achieved along with composite regeneration.展开更多
基金The authors thank the National Natural Science Foundation of China(No.51906130)the Natural Science Foundation of Shandong Province(No.ZR2019BEE053)+1 种基金the Key R&D and Development Plan of Shandong Province(2020CXGC011401)the Foundation of Shandong Key Lab of Energy Carbon Reduction and Resource Utilization,Shandong University(No.ECRRU201804)for the financial support.
文摘In this study,the Heishan coal was used to prepare a series of activated carbon(AC)samples via a vapor deposition method.The effects of the Fe(NO_(3))3/coal weight ratio on the physicochemical properties of the activated carbon were systematically investigated,and the AC samples were analyzed by the N2 adsorption-desorption technique,the scanning electron microscopy,the X-ray diffraction,the Raman spectroscopy,and the Fourier transform infrared spectroscopy.Furthermore,the adsorption properties of ethyl acetate were investigated.The results indicated that as the Fe(NO_(3))3/coal mass ratio increased from 1:8 to 1:2,the specific surface area,the total pore volume and the micropore volume initially increased and then decreased.The specific surface area increased from 560.86 m^(2)/g to 685.90 m^(2)/g,and then decreased to 299.56 m^(2)/g.The total pore volume and micropore volume increased from 0.29 cm^(3)/g and 0.17 cm^(3)/g to 0.30 cm^(3)/g and 0.22 cm^(3)/g,and then decreased to 0.16 cm^(3)/g and 0.10 cm^(3)/g,respectively.The optimized ratio was 1:8.During the activation process,iron ions infiltrated the activated carbon to promote the development of the pore structure,the pore size of which was between 2.5 nm and 3 nm in daimeter.This approach could enhance the capacity for adsorption of ethyl acetate.It is worth noting that the ACs displaying the largest specific surface area and total pore volume(685.90 m^(2)/g and 0.30 cm^(3)/g)were formed under the optimized activation conditions(950℃,20%(volume)of CO_(2),ratio 1:5),and the maximum AC capacity for adsorption of ethyl acetate was 962.62 mg/g.After seven repeated thermal regeneration experiments,the saturated AC adsorption capacity was still above 90%.
基金Funded by the National Natural Science Foundation of China(51566017)
文摘We prepared a kind of metal oxide-modified walnut-shell activated carbon(MWAC) by KOH chemical activation method and used for PH_3 adsorption removal. Meanwhile, the PH_3 adsorption equilibrium was investigated experimentally and fitted by the Toth equation, and the isosteric heat of PH_3 adsorption was calculated by the Clausius-Clapeyron Equation. The exhausted MWAC was regenerated by water washing and air drying. Moreover, the properties of five different samples were characterized by N_2 adsorption isotherm, SEM/EDS, XPS, and FTIR. The results showed that the maximum PH_3 equilibrium adsorption capacity was 595.56 mg/g. The MWAC had an energetically heterogeneous surface due to values of isosteric heat of adsorption ranging from 43 to 90 kJ/mol. The regeneration method provided an effective way for both adsorption species recycling and exhausted carbon regeneration. The high removal efficiency and big equilibrium adsorption capacity for PH_3 adsorption on the MWAC were related to its large surface area and high oxidation activity in PH_3 adsorption-oxidation to H_3 PO_4 and P_2 O_5. Furthermore, a possible PH_3 adsorption mechanism was proposed.
文摘An experimental study of the adsorption performances of NH3 on several commercial activated carbons was described. Firstly, the specific surface area, pore size distribution and morphological structure of the activated carbons have been characterized by N2 adsorption, Scanning Electron Microscope (SEM), and X-ray diffraction (XRD). The adsorption capacities of four kinds of activated carbons were compared based on adsorption isotherms at 30℃. Results show that a type of activated carbon MSC30 with high adsorption capacity of NH3 is a promising adsorbent for NH3 because of its large specific surface area and high pore volume. Secondly, the effect of adsorption temperature on the adsorption capacity of NH3 on MSC30 was investigated. A modified Dubinin-Astakhov equation was employed to describe the adsorption isotherms, with the reliability and accuracy evaluation. The isosteric heat of adsorption of MSC30-NH3 as a function of the amount adsorbed was calculated applying the Clausius-Clapeyron equation with isotherms obtained at 20℃ and 30℃. Thirdly, a packed-bed type adsorber was used to evaluate the influence of cycle time on the system cooling performance (coefficient of performance, specific cooling performance, and volumetric cooling performance) of the MSC30-NH3 pair at the evaporating temperatures of 5℃, 10℃ and 15℃ with a fixed adsorption/condensing temperature and desorption temperature of 30?C and 80℃, respectively. Finally, a long term operation without degradation for MSC30-NH3 adsorption was experimentally demonstrated from the 80 consecutive adsorption-desorption cycles.
文摘A general research program, focusing on activated carbon fiber cloths (ACFC) and felt for environmental protection was performed. The objectives were multiple: (i) a better understanding of the adsorption mecha- nisms of these kinds of materials; (ii) the specification and optimization of new processes using these adsorbents; (iii) the modeling of the adsorption of organic pollutants using both the usual and original approaches; (iv) applications of ACFC in industrial processes. The general question was: how can activated carbon fiber cloths and felts be used in air treatment processes for the protection of environment. In order to provide an answer, different approaches were adopted. The materials (ACFC) were characterized in terms of macro structure and internal porosity. Specific studies were performed to get the air flow pattern through the fabrics. Head loss data were generated and modeled as a fi.mction of air velocity. The performances of ACF to remove volatile organic compounds (VOCs) were approached with the adsorption isotherms and breakthrough curves in various operating conditions. Regenera- tion by Joule effect shows a homogenous heating of adsorber modules with rolled or pleated layers. Examples of industrial developments were presented showing an interesting technology for the removal of VOCs, such as dichloromethane, benzene, isopropyl alcohol and toluene, alone or in a complex mixture.
基金financialy supported by the National Natural Science Foundation of China (No.21936005,52070114,21876093)the Postdoctoral Science Program of China (No.2019M660061)
文摘Regenerated activated carbon(RAC)samples were prepared by carbon activation using waste activated carbon from solid waste resources as the carbon source precursor coupled with adding alkaline additives,and then were further modified by potassium ferrate to finally prepare high-performance carbon for VOCs adsorption.At the same time,the samples before and after modification were systematically studied through characterization techniques such as SEM,Raman spectrometry,FT-IR,XPS,and dynamic/static adsorption.The results showed that the specific surface area and pore volume of the RAC after modification by the strong oxidant potassium ferrate increased by 1.4 times;the degree of defects was enhanced and the content of oxygen-containing functional groups on the surface increased significantly.Among them,the sample modified with potassium ferrate for 24 h had the best dynamic toluene adsorption performance(375.5 mg/g),and the dynamic adsorption capacity was twice that of the original sample(192.8 mg/g).The static adsorption test found that the maximum adsorption capacity of RAC-6%K_(2)FeO_(4)+H_(2)SO_(4)-24h was 796 mg/g,which indicated that the potassium ferrate modification treatment could significantly increase the VOCs adsorption performance of RAC.In addition,through consecutive toluene adsorption-desorption cycle tests,it was found that the RAC-6%K_(2)FeO_(4)+H_(2)SO_(4)-24h sample still retained 91%of adsorption activity after the fifth regeneration cycle.This indicates that RAC-6%K_(2)FeO_(4)+H_(2)SO_(4)-24h has good cycle stability and great application value for the efficient purification of industrial waste VOCs gas.
文摘The study of the performances of regenerated activated carbons for the adsorption of MO(methyl orange)in an aqueous medium was carried out with the aim to evaluate the adsorption capacities of these activated carbons.Three regenerated activated carbons issued from the unit of oil treatment of the thermal power station of Dibamba(Cameroon)-DPDC(Dibamba Power Development Company)were obtained thermally and chemically.These three samples(namely CAR 400℃(chemical regenerated activated carbon at 400℃),CAR 700℃(physical regenerated activated carbon at 700℃)and CAR 900℃(physical regenerated activated carbon at 900℃))and the non-used one CA were characterized by iodine number,XRD(X-ray Diffraction)and FTIR(Fourier-transform infrared spectroscopy).MO adsorption tests were performed in batch mode;this technique allowed the study of the influence of the parameters such as:the contact time,the initial’s MO concentration and the pH.Moreover,different kinetic models(first-order,pseudo-second-order and Webber and Morris intra-particle diffusion)and adsorption isotherms(Langmuir and Freundlich)are used for the evaluation of adsorption capacities.The physicochemical characterization of these adsorbents showed that they were micro-porous(iodine value:600 mg/g)and strongly crystallized according to their regeneration pathways.The influence of the parameters revealed that the adsorption of MO is the most favorable for concentrations from 5 to 25 mg/L(for materials CA and CAR 400℃)and 10 to 25 g/L(for materials CAR 700℃ and 900℃);and that it was maximum in acid medium(at pH=3 on the materials CA,CAR 400℃,CAR 900℃ and at pH=5 on the material CAR 900℃).The modeling of the adsorption kinetics of MO has revealed the conformity of the kinetic model of pseudosecond-order and intra-particle diffusion for some of these materials.The study of isotherms has shown that the Langmuir isotherm best describes the adsorption of MO on most of these adsorbents.
文摘Effluents containing inorganic contaminants are releasing into the environment untreated despite being hazardous to man and environment. It is costly and unsustainable to use conventional methods to remove them from dilute aqueous solution. Adsorption involving granular activated carbon is an alternative method for treating such effluents. Granular activated carbon is structurally strong, highly resistance to attrition and wearing, large and can easily separate from the effluents. However, its surface is highly hydrophobic and has little surface charge thereby reducing its adsorption capacity for anion or cation. This article reviews surfactant modification of activated carbon to enhance its adsorption capacity for inorganic contaminants and key factors affecting the adsorption efficiency. They include initial concentration of contaminants, contact time, solution pH, solution temperature, adsorbent concentration, ionic strength, competing ions, type of surfactant, and surfactant concentration. The modified activated carbon usually shows maximum contaminant uptake around its critical micelles concentration. Surfactant modification reduces specific surface area and/or micro pore volume but hot NaOH or HNO3 treatment before surfactant modification minimises this drawbacks and increases the net surface charge. Overall, surfactant modification is a simple but efficient method of enhancing adsorption capacity of activated carbon for removing anion or cation from aqueous solution. However, a handful publication is available on the regeneration of the spent (saturated) surfactant modified activated carbons. Hence, more research efforts should be directed towards proper regenerating reagents and the optimise conditions such as contact time, concentration, and temperature for regenerating spent modified activated carbons.
基金the National Science Fund for Distinguished Young Scholars of China(No.50225621)the Shanghai Shuguang Training Program for the Talents (No.02GG03)the Natural Science Fund of Shanghai City(No.05ZR14072)
文摘The nitrogen adsorption isotherms at 77.69 K were measured for two samples of activated carbon fibers and their microstructures were investigated. Among established isotherm equations, the Dubinin-Radushkevieh equation showed the best agreement with the experimental data, while the Langmuir equation showed a large deviation when employed at low relative pressures. The MP method, t-method and as-method were used to analyze the pore size distribution. The calculated average pore widths and BET (Brunauer-Emmett-Teller) surface areas for the sample A-13 were 0.86 nm and 1 286.60 m^2/g, while for the sample A-16, they were 0.82 nm and 1 490.64 m^2/g. The sample with larger pore width was more suitable to be used as additive in chemical heat pumps, while the other one could be used as adsorbent in adsorption refrigeration systems .
基金support from the Government of the Republic of Uganda through Makerere University Research and Innovations Fund(RIF1/CEDAT/015).
文摘There is an increased global demand for activated carbon(AC)in application of water treatment and purification.Water pollutants that have exhibited a greater removal efficiency by AC included but not limited to heavy metals,pharmaceuticals,pesticides,natural organic matter,disinfection by-products,and microplastics.Granular activated carbon(GAC)is mostly used in aqueous so-lutions and adsorption columns for water treatment.Commercial AC is not only costly,but also obtained from non-renewable sources.This has prompted the search for alternative renewable materials for AC production.Biomass wastes present a great potential of such materials because of their availability and carbonaceous nature.This in turn can reduce on the adverse environmental effects caused by poor disposal of these wastes.The challenges associated with biomass waste based GAC are their low strength and attrition resistance which make them easily disintegrate under aqueous phase.This paper provides a comprehensive review on recent advances in production of biomass waste based GAC for water treatment and highlights future research directions.Production parameters such as granulation conditions,use of binders,carbonization,activation methods,and their effect on textural properties are discussed.Factors influencing the adsorption capacities of the derived GACs,adsorption models,adsorption mechanisms,and their regeneration potentials are reviewed.The literature reveals that biomass waste materials can produce GAC for use in water treatment with possibilities of being regenerated.Nonetheless,there is a need to explore 1)the effect of preparation pathways on the adsorptive properties of biomass derived GAC,2)sustainable production of biomass derived GAC based on life cycle assessment and techno-economic analysis,and 3)adsorption mechanisms of GAC for removal of contaminants of emerging concerns such as microplastics and unregulated disinfection by-products.
基金The study received financial support from the National Natural Science Foundation of China(No.51778012).
文摘Photo-responsive adsorption-photocatalysis nanocomposites are generally used in water and wastewater decontamination;however,the prolonged adsorption capacity of composites and the role of adsorption in concomitant photocatalysis are typically neglected.These composites can be regenerated under light irradiation as their adsorption capacity decreases.Herein,a novel adsorption-photocatalysis bifunctional nanocomposite,Bi-doped TiO2 supported on powdered activated carbon(Bi2O3/TiO2/PAC),was prepared using the solimpregnation-hydrothermal procedure.Bi2O3/TiO2/PAC with a secondary calcination temperature of 700℃under a nitrogen atmosphere was selected for maximum adsorption capacity on Methyl Orange(MO).The composite displayed an excellent adsorption capacity and was easily separated and recycled.The results demonstrate that 71.2%photocatalytic regeneration efficiency could be attained under visible light irradiation for 1 hr at an intensity of 750 W/m^2 and pH 7.Characterization of the as-prepared Bi2O3/TiO2/PAC nanocomposite(700℃)indicates that it possesses a highly specific surface area and great optical properties,showing bifunctional adsorption-photocatalysis characteristics.The p-n heterojunction of the composite played a dominant role in the photocatalytic regeneration process,and effective degradation of MO could be achieved along with composite regeneration.