A Critical Review of Active Distribution Network Reconfiguration:Concepts,Development,and Perspectives

In recent years,the large-scale grid connection of various distributed power sources has made the planning and operation of distribution grids increasingly complex.Consequently,a large number of active distribution network reconfiguration techniques have emerged to reduce system losses,improve system safety,and enhance power quality via switching switches to change the system topology while ensuring the radial structure of the network.While scholars have previously reviewed these methods,they all have obvious shortcomings,such as a lack of systematic integration of methods,vague classification,lack of constructive suggestions for future study,etc.Therefore,this paper attempts to provide a comprehensive and profound review of 52 methods and applications of active distribution network reconfiguration through systematic method classification and enumeration.Specifically,these methods are classified into five categories,i.e.,traditional methods,mathematical methods,meta-heuristic algorithms,machine learning methods,and hybrid methods.A thorough comparison of the various methods is also scored in terms of their practicality,complexity,number of switching actions,performance improvement,advantages,and disadvantages.Finally,four summaries and four future research prospects are presented.In summary,this paper aims to provide an up-to-date and well-rounded manual for subsequent researchers and scholars engaged in related fields.

Active Network研究综述

介绍了两种实现 Active Network方法 ,描述 Active Network结构与组成、Active Network封装协议和 ActiveNetwork编程模型 .讨论国内外对 Active Network的研究成果和进展 .在该文最后对 Active network研究作了总结 。

Active Network系统的结构分析与研究

现有的网络系统基于"端到端"的模型体系,是1984年由H.Salzer、D.Reed和D.Clark提出来的.在这种网络中,相关的计算和控制是在发送和接收"端点"进行的,在网络的结点上不对包进行处理.虽然在网络中路由器和交换机可以改变包头,但是对用户的数据不做任何处理,因此目前的网络系统又称为是"被动网络".

Sensor Scheduling for Target Tracking in Networks of Active Sensors

Wireless sensor network (WSN) of active sensors suffers from serious inter-sensor interference (ISI) and imposes new design and implementation challenges. In this paper, based on the ultrasonic sensor network, two time-division based distributed sensor scheduling schemes are proposed to deal with ISI by scheduling sensors periodically and adaptively respectively. Extended Kalman filter (EKF) is used as the tracking algorithm in distributed manner. Simulation results show that the adaptive sensor scheduling scheme can achieve superior tracking accuracy with faster tracking convergence speed.

Active Vibration Isolation of Micro-Manufacturing Platform Based on Neural Network

The micromation and precision of the Micro-Electromechanical System demand that its manufacturing, measuring and assembling must work in a micro-manufacturing platform with good ability to isolate vibrations. This paper develops a vibration isolation system of micro-manufacturing platform. The brains of many kinds of birds can isolate vibrations well, such as woodpecker’s brain. When a woodpecker pecks the wood at the speed as 1.6 times as the velocity of sound, its brain will tolerate the wallop 1 500 times of the weight of itself without any damage. The isolation mechanics and organic texture of woodpecker’s brain that has good isolation characteristics were studied. A structure model of vibration isolation system for the micro-manufacturing platform is established based on the bionics of the bird’s brain vibration isolation mechanism. In order to isolate effectively the high frequency vibrations from the ground, a rubber layer is used to isolate vibrations passively between the micro-manufacturing platform’s pedestal and the ground. This layer corresponds to the cartilage and muscles in the outer meninges of the bird’s brain. The active vibration isolation technique is adopted to isolate vibrations between the micro-manufacturing platform and the pedestal. Air springs are used as elastic components, which correspond to the interspaces between the outer meninges and the encephala of the bird’s brain. Actuators are made of giant magnetostrictive material, and it corresponds to the nerves and neural muscles linking the meninges and the encephala. The actuators and air springs are arranged vertically in parallel to make use of the giant magnetostrictive actuators effectively. The air springs support almost all weight of the micro-manufacturing platform and the giant magnetostrictive actuators support almost no weight. In order to realize high performance to isolate complex micro-vibration, the control method using a three-layer neural network is presented. This vibration control system takes into account the floor disturbance and the direct disturbance acting on the micro-manufacturing platform. The absolute acceleration of the micro-manufacturing platform is used as the performance index of vibration control. The performance of the control system is tested by numerical simulation. Simulation results show that the active vibration isolation system has good isolation performance against the floor disturbance and the direct disturbance acting on the micro-manufacturing platform in all the frequency range.

Network Pharmacology-based Research of Active Components of Albiziae Flos and Mechanisms of Its Antidepressant Effect

Albiziae Flos(AF)has been experimentally proven to have an antidepressant effect.However,due to the complexity of botanical ingredients,the exact pharmacological mechanism of action of AF in depression has not been completely deciphered.This study used the network pharmacology method to construct a component-target-pathway network to explore the active components and potential mechanisms of action of AF.The methods included collection and screening of chemical components,prediction of depression-associated targets of the active components,gene enrichment,and network construction and analysis.Quercetin and 4 other active components were found to exert an tidepressant effects mainly via monoaminergic neurotransmitters and cAMP signaling and neuroactive ligand・wceptor interaction pathways.DRD2,HTR1 A,and SLC6A4 were identified as important targets of the studied bioactive components of AF.This network pharmacology analysis provides guidance for further study of the antidepressant mechanism of AF.

Guaranteed Cost Active Fault-tolerant Control of Networked Control System with Packet Dropout and Transmission Delay

The problem of guaranteed cost active fault-tolerant controller （AFTC） design for networked control systems （NCSs） with both packet dropout and transmission delay is studied in this paper. Considering the packet dropout and transmission delay, a piecewise constant controller is adopted. With a guaranteed cost function, optimal controllers whose number is equal to the number of actuators are designed, and the design process is formulated as a convex optimal problem that can be solved by existing software. The control strategy is proposed as follows： when actuator failures appear, the fault detection and isolation unit sends out the information to the controller choosing strategy, and then the optimal stabilizing controller with the smallest guaranteed cost value is chosen. Two illustrative examples are given to demonstrate the effectiveness of the proposed approach. By comparing with the existing methods, it can be seen that our method has a better performance.

Multi-Path Routing and Resource Allocation in Active Network

An algorithm of traffic distribution called active multi-path routing (AMR)in active network is proposed. AMR adopts multi-path routing and applies nonlinear optimizeapproximate method to distribute network traffic among multiple paths. It is combined to bandwidthresource allocation and the congestion restraint mechanism to avoid congestion happening and worsen.So network performance can be improved greatly. The frame of AMR includes adaptive trafficallocation model, the conception of supply bandwidth and its' allocation model, the principle ofcongestion restraint and its' model, and the implement of AMR based on multi-agents system in activenetwork. Through simulations, AMR has distinct effects on network performance. The results show AMRisa valid traffic regulation algorithm.

Neural Network-Based Active Control for Offshore Platforms

A new active control scheme, based on neural network, for the suppression of oscillation in multiple-degree-of-freedom (MDOF) offshore platforms, is studied in this paper. With the main advantages of neural network, i.e. the inherent robustness, fault tolerance, and generalized capability of its parallel massive interconnection structure, the active structural control of offshore platforms under random waves is accomplished by use of the BP neural network model. The neural network is trained offline with the data generated from numerical analysis, and it simulates the process of Classical Linear Quadratic Regular Control for the platform under random waves. After the learning phase, the trained network has learned about the nonlinear dynamic behavior of the active control system, and is capable of predicting the active control forces of the next time steps. The results obtained show that the active control is feasible and effective, and it finally overcomes time delay owing to the robustness, fault tolerance, and generalized capability of artificial neural network.

A FUZZY-LOGIC CONTROL ALGORITHM FOR ACTIVE QUEUE MANAGEMENT IN IP NETWORKS

Active Queue Management (AQM) is an active research area in the Internet community. Random Early Detection (RED) is a typical AQM algorithm, but it is known that it is difficult to configure its parameters and its average queue length is closely related to the load level. This paper proposes an effective fuzzy congestion control algorithm based on fuzzy logic which uses the pre- dominance of fuzzy logic to deal with uncertain events. The main advantage of this new congestion control algorithm is that it discards the packet dropping mechanism of RED, and calculates packet loss according to a preconfigured fuzzy logic by using the queue length and the buffer usage ratio. Theo- retical analysis and Network Simulator (NS) simulation results show that the proposed algorithm achieves more throughput and more stable queue length than traditional schemes. It really improves a router's ability in network congestion control in IP network.

Sum-Rate Maximization in Active RIS-Assisted Multi-Antenna WPCN

In this paper,we propose an active reconfigurable intelligent surface(RIS)enabled hybrid relaying scheme for a multi-antenna wireless powered communication network(WPCN),where the active RIS is employed to assist both wireless energy transfer(WET)from the power station(PS)to energyconstrained users and wireless information transmission(WIT)from users to the receiving station(RS).For further performance enhancement,we propose to employ both transmit beamforming at the PS and receive beamforming at the RS.We formulate a sumrate maximization problem by jointly optimizing the RIS phase shifts and amplitude reflection coefficients for both the WET and the WIT,transmit and receive beamforming vectors,and network resource allocation.To solve this non-convex problem,we propose an efficient alternating optimization algorithm with the linear minimum mean squared error criterion,semidefinite relaxation(SDR)and successive convex approximation techniques.Specifically,the tightness of applying the SDR is proved.Simulation results demonstrate that our proposed scheme with 10 reflecting elements(REs)and 4 antennas can achieve 17.78%and 415.48%performance gains compared to the single-antenna scheme with 10 REs and passive RIS scheme with 100 REs,respectively.

Predictive active control of building structures using LQR and artificial intelligence

This study presents a neural network-based model for predicting linear quadratic regulator(LQR)weighting matrices for achieving a target response reduction.Based on the expected weighting matrices,the LQR algorithm is used to determine the various responses of the structure.The responses are determined by numerically analyzing the governing equation of motion using the state-space approach.For training a neural network,four input parameters are considered:the time history of the ground motion,the percentage reduction in lateral displacement,lateral velocity,and lateral acceleration,Output parameters are LQR weighting matrices.To study the effectiveness of an LQR-based neural network(LQRNN),the actual percentage reduction in the responses obtained from using LQRNN is compared with the target percentage reductions.Furthermore,to investigate the efficacy of an active control system using LQRNN,the controlled responses of a system are compared to the corresponding uncontrolled responses.The trained neural network effectively predicts weighting parameters that can provide a percentage reduction in displacement,velocity,and acceleration close to the target percentage reduction.Based on the simulation study,it can be concluded that significant response reductions are observed in the active-controlled system using LQRNN.Moreover,the LQRNN algorithm can replace conventional LQR control with the use of an active control system.

Fractional Gradient Descent RBFNN for Active Fault-Tolerant Control of Plant Protection UAVs

With the increasing prevalence of high-order systems in engineering applications, these systems often exhibitsignificant disturbances and can be challenging to model accurately. As a result, the active disturbance rejectioncontroller (ADRC) has been widely applied in various fields. However, in controlling plant protection unmannedaerial vehicles (UAVs), which are typically large and subject to significant disturbances, load disturbances andthe possibility of multiple actuator faults during pesticide spraying pose significant challenges. To address theseissues, this paper proposes a novel fault-tolerant control method that combines a radial basis function neuralnetwork (RBFNN) with a second-order ADRC and leverages a fractional gradient descent (FGD) algorithm.We integrate the plant protection UAV model’s uncertain parameters, load disturbance parameters, and actuatorfault parameters and utilize the RBFNN for system parameter identification. The resulting ADRC exhibits loaddisturbance suppression and fault tolerance capabilities, and our proposed active fault-tolerant control law hasLyapunov stability implications. Experimental results obtained using a multi-rotor fault-tolerant test platformdemonstrate that the proposed method outperforms other control strategies regarding load disturbance suppressionand fault-tolerant performance.

Analysis of Lavandulyl Flavonoids from Sophora flavescens with Antiinflammatory Activity Based on Molecular Network Technology

[Objectives]This study was conducted to screen lavandulyl flavonoids with anti-inflammatory activity from Sophora flavescens.[Methods]35 compounds were screened from traditional Chinese medicine S.flavescens using the nitric oxide(NO)anti-inflammatory activity model.[Results]Five components,8(xanthohumol),13(kurarinol),27(4-methoxysalicylic acid),28(b-resorcic acid)and 30(b-resorcic acid),exhibited significant anti-inflammatory activity,with IC 50 values of 5.99,4.76,6.96,3.41 and 5.22μM,respectively.Especially,8(xanthohumol)and 13(kurarinol)were typical lavandulyl flavonoids in S.flavescens,which were worth further exploration.Furthermore,UPLC-Q-Exactive and GNPS molecular networking technique were used for rapid analysis of lavandulyl flavonoids from S.flavescens.A total of 15 components were identified.[Conclusions]This work lays a theoretical foundation for further separation and analysis of lavandulyl flavonoids with anti-inflammatory activity from S.flavescens.

Artificial Neural Network Modeling for Predicting Thermal Conductivity of EG/Water-Based CNC Nanofluid for Engine Cooling Using Different Activation Functions

A vehicle engine cooling system is of utmost importance to ensure that the engine operates in a safe temperature range.In most radiators that are used to cool an engine,water serves as a cooling fluid.The performance of a radiator in terms of heat transmission is significantly influenced by the incorporation of nanoparticles into the cooling water.Concentration and uniformity of nanoparticle distribution are the two major factors for the practical use of nanofluids.The shape and size of nanoparticles also have a great impact on the performance of heat transfer.Many researchers are investigating the impact of nanoparticles on heat transfer.This study aims to develop an artificial neural network(ANN)model for predicting the thermal conductivity of an ethylene glycol(EG)/waterbased crystalline nanocellulose(CNC)nanofluid for cooling internal combustion engine.The implementation of an artificial neural network considering different activation functions in the hidden layer is made to find the bestmodel for the cooling of an engine using the nanofluid.Accuracies of the model with different activation functions in artificial neural networks are analyzed for different nanofluid concentrations and temperatures.In artificial neural networks,Levenberg–Marquardt is an optimization approach used with activation functions,including Tansig and Logsig functions in the training phase.The findings of each training,testing,and validation phase are presented to demonstrate the network that provides the highest level of accuracy.The best result was obtained with Tansig,which has a correlation of 0.99903 and an error of 3.7959×10^(–8).It has also been noticed that the Logsig function can also be a good model due to its correlation of 0.99890 and an error of 4.9218×10^(–8).Thus ourANNwith Tansig and Logsig functions demonstrates a high correlation between the actual output and the predicted output.

Research on Grid-Connected Control Strategy of Distributed Generator Based on Improved Linear Active Disturbance Rejection Control

The virtual synchronous generator(VSG)technology has been proposed to address the problem of system frequency and active power oscillation caused by grid-connected new energy power sources.However,the traditional voltage-current double-closed-loop control used in VSG has the disadvantages of poor disturbance immunity and insufficient dynamic response.In light of the issues above,a virtual synchronous generator voltage outer-loop control strategy based on improved linear autonomous disturbance rejection control(ILADRC)is put forth for consideration.Firstly,an improved first-order linear self-immunity control structure is established for the characteristics of the voltage outer loop;then,the effects of two key control parameters-observer bandwidthω_(0)and controller bandwidthω_(c)on the control system are analyzed,and the key parameters of ILADRC are optimally tuned online using improved gray wolf optimizer-radial basis function(IGWO-RBF)neural network.A simulationmodel is developed using MATLAB to simulate,analyze,and compare the method introduced in this paper.Simulations are performed with the traditional control strategy for comparison,and the results demonstrate that the proposed control method offers superior anti-interference performance.It effectively addresses power and frequency oscillation issues and enhances the stability of the VSG during grid-connected operation.

An Identified Study on the Active Network of a Thermoacoustic Regenerator

An active thermo-acoustic network model of regenerator which is a key component to accomplish the con-version between thermal-and acoustic power in thermo-acoustic system has been established in this paper. The experiment was carried out to quantify the network. A method called least square is employed in order to identify the H matrix describing the system. The results obtained here show that the active thermo-acoustic network can reliably depict the characteristics of a thermo-acoustic system.

General Decay Synchronization of Competitive Fuzzy Neural Networks Involving Time Delays and Right-Hand Discontinuous Activation

This paper discusses the general decay synchronization problem for a class of fuzzy competitive neural networks with time-varying delays and discontinuous activation functions. Firstly, based on the concept of Filippov solutions for right-hand discontinuous systems, some sufficient conditions for general decay synchronization of the considered system are obtained via designing a nonlinear feedback controller and applying discontinuous differential equation theory, Lyapunov functional methods and some inequality techniques. Finally, one numerical example is given to verify the effectiveness of the proposed theoretical results. The general decay synchronization considered in this article can better estimate the convergence rate of the system, and the exponential synchronization and polynomial synchronization can be seen as its special cases.

Fusion of Activation Functions: An Alternative to Improving Prediction Accuracy in Artificial Neural Networks

The purpose of this study was to address the challenges in predicting and classifying accuracy in modeling Container Dwell Time (CDT) using Artificial Neural Networks (ANN). This objective was driven by the suboptimal outcomes reported in previous studies and sought to apply an innovative approach to improve these results. To achieve this, the study applied the Fusion of Activation Functions (FAFs) to a substantial dataset. This dataset included 307,594 container records from the Port of Tema from 2014 to 2022, encompassing both import and transit containers. The RandomizedSearchCV algorithm from Python’s Scikit-learn library was utilized in the methodological approach to yield the optimal activation function for prediction accuracy. The results indicated that “ajaLT”, a fusion of the Logistic and Hyperbolic Tangent Activation Functions, provided the best prediction accuracy, reaching a high of 82%. Despite these encouraging findings, it’s crucial to recognize the study’s limitations. While Fusion of Activation Functions is a promising method, further evaluation is necessary across different container types and port operations to ascertain the broader applicability and generalizability of these findings. The original value of this study lies in its innovative application of FAFs to CDT. Unlike previous studies, this research evaluates the method based on prediction accuracy rather than training time. It opens new avenues for machine learning engineers and researchers in applying FAFs to enhance prediction accuracy in CDT modeling, contributing to a previously underexplored area.

Active Probing Based Method for Fault Diagnosis Using Bayesian Network

Fault diagnosis on large-scale and complex networks is a challenging task, as it requires efficient and accurate inference from huge data volumes. Active probing is a cost-efficient tool for fault diagnosis. However almost all existing probing-based techniques face the following problems: 1) performing inaccurately in noisy networks; 2) generating additional traffic to the network; 3) high cost computation. To address these problems, we propose an efficient probe selection algorithm for fault diagnosis based on Bayesian network. Moreover, two approaches which could significantly reduce the computational complexity of the probe selection process are provided. Finally, we implement the new proposed algorithm and a former representative probing-based algorithm (BPEA algorithm) on different settings of networks. The results show that, the new algorithm performs much faster than BPEA does without sacrificing the diagnostic quality, especially in large, noisy and multiple-fault networks.