HPR1000 is an advanced nuclear power plant(NPP)with the significant feature of an active and passive safety design philosophy,developed by the China National Nuclear Corporation.On one hand,it is an evolutionary desig...HPR1000 is an advanced nuclear power plant(NPP)with the significant feature of an active and passive safety design philosophy,developed by the China National Nuclear Corporation.On one hand,it is an evolutionary design based on proven technology of the existing pressurized water reactor NPP;on the other hand,it incorporates advanced design features including a 177-fuel-assembly core loaded with CF3 fuel assemblies,active and passive safety systems,comprehensive severe accident prevention and mitigation measures,enhanced protection against external events,and improved emergency response capability.Extensive verification experiments and tests have been performed for critical innovative improvements on passive systems,the reactor core,and the main equipment.The design of HPR1000fulfills the international utility requirements for advanced light water reactors and the latest nuclear safety requirements,and addresses the safety issues relevant to the Fukushima accident.Along with its outstanding safety and economy,HPR1000 provides an excellent and practicable solution for both domestic and international nuclear power markets.展开更多
Although the performance of membrane reactors(MR) is highly affected by the ratio of membrane area-toreaction volume, there are few studies on this effect owing to the difficulties associated with reactor manufacture....Although the performance of membrane reactors(MR) is highly affected by the ratio of membrane area-toreaction volume, there are few studies on this effect owing to the difficulties associated with reactor manufacture. In this study, an MR with high A/V ratio, a diameter of 35 m,and a height of 0.8 mm was fabricated. Separation performance of this MR was investigated in an n-butanol/water system. Esterification of acetic acid and n-butanol was used as the model reaction to investigate the performance of catalytically active membrane reactors(CAMR)with different A/V ratios. The reaction conversion was 38.59% in the CAMR with the high A/V ratio of 12,497/m,which was much higher than that in other CAMRs, for reaction time of 60 min and W/Vfratio of 0.093 g/mL.Excellent catalytic stability of the CAMR was confirmed by performing long-term stability experiments.展开更多
Activation analyses play a vital role in nuclear reactor design.Activation analyses,along with nuclear analyses,provide important information for nuclear safety and maintenance strategies.Activation analyses also help...Activation analyses play a vital role in nuclear reactor design.Activation analyses,along with nuclear analyses,provide important information for nuclear safety and maintenance strategies.Activation analyses also help in the selection of materials for a nuclear reactor,by providing the radioactivity and dose rate levels after irradiation.This information is important to help define maintenance activity for different parts of the reactor,and to plan decommissioning and radioactive waste disposal strategies.The study of activation analyses of candidate structural materials for near-term fusion reactors or ITER is equally essential,due to the presence of a highenergy neutron environment which makes decisive demands on material selection.This study comprises two parts; in the first part the activation characteristics,in a fusion radiation environment,of several elements which are widely present in structural materials,are studied.It reveals that the presence of a few specific elements in a material can diminish its feasibility for use in the nuclear environment.The second part of the study concentrates on activation analyses of candidate structural materials for near-term fusion reactors and their comparison in fusion radiation conditions.The structural materials selected for this study,i.e.India-specific Reduced Activation Ferritic-Martensitic steel(IN-RAFMS),P91-grade steel,stainless steel 316 LN ITER-grade(SS-316 LN-IG),stainless steel 316 L and stainless steel 304,are candidates for use in ITER either in vessel components or test blanket systems.Tungsten is also included in this study because of its use for ITER plasma-facing components.The study is carried out using the reference parameters of the ITER fusion reactor.The activation characteristics of the materials are assessed considering the irradiation at an ITER equatorial port.The presence of elements like Nb,Mo,Co and Ta in a structural material enhance the activity level as well as the dose level,which has an impact on design considerations.IN-RAFMS was shown to be a more effective low-activation material than SS-316 LN-IG.展开更多
Specific ATP content of volatile solids was measured to characterize the sludge activity in a sequential anaerobic/aerobic wastewater treatment system, with an upflow anaerobic sludge blanket (UASB) reactor and a thre...Specific ATP content of volatile solids was measured to characterize the sludge activity in a sequential anaerobic/aerobic wastewater treatment system, with an upflow anaerobic sludge blanket (UASB) reactor and a three-phase aerobic fluidized bed (AFB) reactor. The wastewater COD level was 2000-3000 mg/L in simulation of real textile wastewater. The ATP content and the specific ATP contents of volatile solids at different heights of the UASB reactor and those of the suspended and immobilized biomass in the AFB reactor were measured. In the UASB reactor, the maximum value of specific ATP (0.85 mg ATP/g VS) was obtained at a hydraulic retention time (HRT) 7.14 h in the blanket solution. In the AFB reactor, the specific ATP content of suspended biomass was higher than that of immobilized biomass and increased with hydraulic retention time reaching a maximum value of 1.6 mg ATP/g VS at hydraulic retention time 4.35 h. The ATP content of anaerobes in the UASB effluent declined rapidly under aerobic conditions following a 2nd-order kinetic model.展开更多
The activity concentration of natural and fallout radionuclides in the soil at some selected Thanas around the TRIGA Mark-II Research Reactor at Atomic Energy Research Establishment (AERE), Savar, Dhaka were measured ...The activity concentration of natural and fallout radionuclides in the soil at some selected Thanas around the TRIGA Mark-II Research Reactor at Atomic Energy Research Establishment (AERE), Savar, Dhaka were measured by using a high purity germanium detector (HPGe). The study revealed that only natural radionuclides were present in the samples and no trace of any artificial radionuclide was found. The average activity concentration of 238U, 232Th and 40K were found to be 37.8 ± 5.6 Bq.kg-1, 58.2 ± 11.0 Bq.kg-1 and 790.8 ± 153.4 Bq.kg-1 respectively. The radium equivalent activity (Req), absorbed dose rate (D), external radiation hazard index (Hex) and internal radiation hazard index (Hin) were also calculated to find out the probable radiological hazard of the natural radioactivity.展开更多
In order to improve poly-β-hydroxybutyrate(PHB) production in activated sludge, the anaerobic/aerobic alternative operating sequencing batch reactor(SBR) process was applied in this paper to accumulate PHB. Effec...In order to improve poly-β-hydroxybutyrate(PHB) production in activated sludge, the anaerobic/aerobic alternative operating sequencing batch reactor(SBR) process was applied in this paper to accumulate PHB. Effects of nutritional conditions and carbon concentration on PHB accumulation were studied. Results indicated that PHB accumulation reached the highest level and accounted for 11.2 % under anaerobic condition for phosphate limitation and 20.84 % under aerobic condition for nitrogen and phosphate limitation of mixed liquor suspended solid(MLSS), respectively. In addition, 4 g/L was proved to be the optimum carbon concentration in both anaerobic and aerobic experiments, and the PHB accumulation reached 17.1 %(anaerobic, phosphorus limitation) and 60.4 %(aerobic, nitrogen and phosphorus limitation) of MLSS, respectively. PHB could be successfully extracted with sodium hypochlorite and chloroform method from the activated sludge. In addition, the infrared spectrum showed that the PHB sample extracted was of high purity.展开更多
By combining sequencing batch reactor (SBR) activated sludge process and constructed wetland (CW), this study is to achieve the domestic wastewater treatment. Our purpose was to determine the optimum operating paramet...By combining sequencing batch reactor (SBR) activated sludge process and constructed wetland (CW), this study is to achieve the domestic wastewater treatment. Our purpose was to determine the optimum operating parameters of the combined process. The process involved advantages and shortages of SBR and CW. Under normal temperature, the 3rd cycle (SBR’s operation cycle is 8 h: inflow for 1 h, limited aeration for 3 h, sediment for 1 h, outflow for 1 h, and idling for 2 h; CW’s hydraulic retention time (HRT) is 24.8 h and hydraulic loading is 24.5 m3/m2 d) was the best cyclic mode. The effluents can meet the standard GB/T18921-2002: "The reuse of urban recycling water: water quality standard for scenic environment use". In the 3rd cycle, the efficiency of CW was the maximum, and energy consumption of SBR was the minimum. Under the condition of low dissolved oxygen, the removing efficiency of chemical oxygen demand (COD) and ammonia was not affected obviously. Simultaneously, nitrification and denitrification phenomena occured and phosphorus was absorbed obviously.展开更多
treatability of synthetic sago wastewater was investigated in a laboratory anaerobic tapered fluidized bed reactor (ATFBR) with a mesoporous granular activated carbon (GAC) as a support material. The experimental ...treatability of synthetic sago wastewater was investigated in a laboratory anaerobic tapered fluidized bed reactor (ATFBR) with a mesoporous granular activated carbon (GAC) as a support material. The experimental protocol was defined to examine the effect of the maximum organic loading rate (OLR), hydraulic retention time (HRT), the efficiency of the reactor and to report on its steady- state performance. The reactor was subjected to a steady-state operation over a range of OLR up to 85.44 kg COD/(m^3·d). The COD removal efficiency was found to be 92% in the reactor while the biogas produced in the digester reached 25.38 m^3/(m^3·d) of the reactor. With the increase of OLR from 83.7 kg COD/(m^3·d), the COD removal efficiency decreased. Also an artificial neural network (ANN) model using multilayer perceptron (MLP) has been developed for a system of two input variable and five output dependent variables. For the training of the input-output data, the experimental values obtained have been used. The output parameters predicted have been found to be much closer to the corresponding experimental ones and the model was validated for 30% of the untrained data. The mean square error (MSE) was found to be only 0.0146.展开更多
Molasses wastewater was evaluated as substrate for biohydrogen production by anaerobic fermentation in a novel continuous mixed attached growth reactor ( CMAGR ) with aeration pretreated sludge attached onto granular ...Molasses wastewater was evaluated as substrate for biohydrogen production by anaerobic fermentation in a novel continuous mixed attached growth reactor ( CMAGR ) with aeration pretreated sludge attached onto granular activated carbon under continuous flow condition.It was indicated that the CMAGR system was operated at the conditions of influent COD of 2000~6000mg / L , hydraulic retention time ( HRT ) of 6hand temperature of 35 ℃ , when the pH value and oxidation-reduction potential ( ORP ) ranged from 4.16and-434 mV respectively , stable ethanol-type fermentation was formed with the sum of ethanol and acetate concentration ratio of 89.3%to the total liquid products after 40days operation.The H 2 content in biogas and chemical oxygen demand ( COD ) removal were estimated to be 46.6% and 13% , respectively.It was also investigated that the effects of organic loading rates ( OLRs ) on CMAGR hydrogen production system.It was found that hydrogen production yield increased from 3.72 mmol / hL to 12.51 mmol / hL as OLRs increased from 8 kg / m 3 d to 32 kg / m 3 d.The maximum hydrogen production rate of 12.51mmol / hL at a OLR of 32kg / m 3 d and the maximum hydrogen yield by substrate consumed was 130.57 mmol / mol happened at OLR of 16 kg / m 3 d.Greater pHs appeared to be favour to butyrate production and the maximum of 0.51mol / mol was obtained at pH of 4.14.However , ethanol / acetate ratio was greater than 1.1at pH fluctuated between 3.4 - 3.6and 4.1 - 4.4which indicated that these pHs were favour to ethanol type fermentation.Therefore , the continuous mixed attached growth reactor ( CMAGR ) could be a promising attached growth system for biohydrogen fermentation.展开更多
文摘HPR1000 is an advanced nuclear power plant(NPP)with the significant feature of an active and passive safety design philosophy,developed by the China National Nuclear Corporation.On one hand,it is an evolutionary design based on proven technology of the existing pressurized water reactor NPP;on the other hand,it incorporates advanced design features including a 177-fuel-assembly core loaded with CF3 fuel assemblies,active and passive safety systems,comprehensive severe accident prevention and mitigation measures,enhanced protection against external events,and improved emergency response capability.Extensive verification experiments and tests have been performed for critical innovative improvements on passive systems,the reactor core,and the main equipment.The design of HPR1000fulfills the international utility requirements for advanced light water reactors and the latest nuclear safety requirements,and addresses the safety issues relevant to the Fukushima accident.Along with its outstanding safety and economy,HPR1000 provides an excellent and practicable solution for both domestic and international nuclear power markets.
基金Supported by Research Project of Chinese Ministry of Education(No.v201308)National Natural Science Foundation of China(No.21476010)
文摘Although the performance of membrane reactors(MR) is highly affected by the ratio of membrane area-toreaction volume, there are few studies on this effect owing to the difficulties associated with reactor manufacture. In this study, an MR with high A/V ratio, a diameter of 35 m,and a height of 0.8 mm was fabricated. Separation performance of this MR was investigated in an n-butanol/water system. Esterification of acetic acid and n-butanol was used as the model reaction to investigate the performance of catalytically active membrane reactors(CAMR)with different A/V ratios. The reaction conversion was 38.59% in the CAMR with the high A/V ratio of 12,497/m,which was much higher than that in other CAMRs, for reaction time of 60 min and W/Vfratio of 0.093 g/mL.Excellent catalytic stability of the CAMR was confirmed by performing long-term stability experiments.
文摘Activation analyses play a vital role in nuclear reactor design.Activation analyses,along with nuclear analyses,provide important information for nuclear safety and maintenance strategies.Activation analyses also help in the selection of materials for a nuclear reactor,by providing the radioactivity and dose rate levels after irradiation.This information is important to help define maintenance activity for different parts of the reactor,and to plan decommissioning and radioactive waste disposal strategies.The study of activation analyses of candidate structural materials for near-term fusion reactors or ITER is equally essential,due to the presence of a highenergy neutron environment which makes decisive demands on material selection.This study comprises two parts; in the first part the activation characteristics,in a fusion radiation environment,of several elements which are widely present in structural materials,are studied.It reveals that the presence of a few specific elements in a material can diminish its feasibility for use in the nuclear environment.The second part of the study concentrates on activation analyses of candidate structural materials for near-term fusion reactors and their comparison in fusion radiation conditions.The structural materials selected for this study,i.e.India-specific Reduced Activation Ferritic-Martensitic steel(IN-RAFMS),P91-grade steel,stainless steel 316 LN ITER-grade(SS-316 LN-IG),stainless steel 316 L and stainless steel 304,are candidates for use in ITER either in vessel components or test blanket systems.Tungsten is also included in this study because of its use for ITER plasma-facing components.The study is carried out using the reference parameters of the ITER fusion reactor.The activation characteristics of the materials are assessed considering the irradiation at an ITER equatorial port.The presence of elements like Nb,Mo,Co and Ta in a structural material enhance the activity level as well as the dose level,which has an impact on design considerations.IN-RAFMS was shown to be a more effective low-activation material than SS-316 LN-IG.
文摘Specific ATP content of volatile solids was measured to characterize the sludge activity in a sequential anaerobic/aerobic wastewater treatment system, with an upflow anaerobic sludge blanket (UASB) reactor and a three-phase aerobic fluidized bed (AFB) reactor. The wastewater COD level was 2000-3000 mg/L in simulation of real textile wastewater. The ATP content and the specific ATP contents of volatile solids at different heights of the UASB reactor and those of the suspended and immobilized biomass in the AFB reactor were measured. In the UASB reactor, the maximum value of specific ATP (0.85 mg ATP/g VS) was obtained at a hydraulic retention time (HRT) 7.14 h in the blanket solution. In the AFB reactor, the specific ATP content of suspended biomass was higher than that of immobilized biomass and increased with hydraulic retention time reaching a maximum value of 1.6 mg ATP/g VS at hydraulic retention time 4.35 h. The ATP content of anaerobes in the UASB effluent declined rapidly under aerobic conditions following a 2nd-order kinetic model.
文摘The activity concentration of natural and fallout radionuclides in the soil at some selected Thanas around the TRIGA Mark-II Research Reactor at Atomic Energy Research Establishment (AERE), Savar, Dhaka were measured by using a high purity germanium detector (HPGe). The study revealed that only natural radionuclides were present in the samples and no trace of any artificial radionuclide was found. The average activity concentration of 238U, 232Th and 40K were found to be 37.8 ± 5.6 Bq.kg-1, 58.2 ± 11.0 Bq.kg-1 and 790.8 ± 153.4 Bq.kg-1 respectively. The radium equivalent activity (Req), absorbed dose rate (D), external radiation hazard index (Hex) and internal radiation hazard index (Hin) were also calculated to find out the probable radiological hazard of the natural radioactivity.
基金Funded by the Fundamental Research Funds for the Central Universities(No.2572014CA23)the National Natural Science Foundation of China(No.51678120)
文摘In order to improve poly-β-hydroxybutyrate(PHB) production in activated sludge, the anaerobic/aerobic alternative operating sequencing batch reactor(SBR) process was applied in this paper to accumulate PHB. Effects of nutritional conditions and carbon concentration on PHB accumulation were studied. Results indicated that PHB accumulation reached the highest level and accounted for 11.2 % under anaerobic condition for phosphate limitation and 20.84 % under aerobic condition for nitrogen and phosphate limitation of mixed liquor suspended solid(MLSS), respectively. In addition, 4 g/L was proved to be the optimum carbon concentration in both anaerobic and aerobic experiments, and the PHB accumulation reached 17.1 %(anaerobic, phosphorus limitation) and 60.4 %(aerobic, nitrogen and phosphorus limitation) of MLSS, respectively. PHB could be successfully extracted with sodium hypochlorite and chloroform method from the activated sludge. In addition, the infrared spectrum showed that the PHB sample extracted was of high purity.
基金Funded by Sustainable Water Management Improves Tomorrow’s City’s Health (SWITCH018530)
文摘By combining sequencing batch reactor (SBR) activated sludge process and constructed wetland (CW), this study is to achieve the domestic wastewater treatment. Our purpose was to determine the optimum operating parameters of the combined process. The process involved advantages and shortages of SBR and CW. Under normal temperature, the 3rd cycle (SBR’s operation cycle is 8 h: inflow for 1 h, limited aeration for 3 h, sediment for 1 h, outflow for 1 h, and idling for 2 h; CW’s hydraulic retention time (HRT) is 24.8 h and hydraulic loading is 24.5 m3/m2 d) was the best cyclic mode. The effluents can meet the standard GB/T18921-2002: "The reuse of urban recycling water: water quality standard for scenic environment use". In the 3rd cycle, the efficiency of CW was the maximum, and energy consumption of SBR was the minimum. Under the condition of low dissolved oxygen, the removing efficiency of chemical oxygen demand (COD) and ammonia was not affected obviously. Simultaneously, nitrification and denitrification phenomena occured and phosphorus was absorbed obviously.
基金Project(2021M703651)supported by the Postdoctoral Science Foundation of ChinaProject(52121004)supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China+1 种基金Project(51825403)supported by the National Natural Science Fundation for Distinguished Young Scholars of ChinaProject(2021RC2010)supported by the Science and Technology Innovation Program of Hunan Province,China。
文摘treatability of synthetic sago wastewater was investigated in a laboratory anaerobic tapered fluidized bed reactor (ATFBR) with a mesoporous granular activated carbon (GAC) as a support material. The experimental protocol was defined to examine the effect of the maximum organic loading rate (OLR), hydraulic retention time (HRT), the efficiency of the reactor and to report on its steady- state performance. The reactor was subjected to a steady-state operation over a range of OLR up to 85.44 kg COD/(m^3·d). The COD removal efficiency was found to be 92% in the reactor while the biogas produced in the digester reached 25.38 m^3/(m^3·d) of the reactor. With the increase of OLR from 83.7 kg COD/(m^3·d), the COD removal efficiency decreased. Also an artificial neural network (ANN) model using multilayer perceptron (MLP) has been developed for a system of two input variable and five output dependent variables. For the training of the input-output data, the experimental values obtained have been used. The output parameters predicted have been found to be much closer to the corresponding experimental ones and the model was validated for 30% of the untrained data. The mean square error (MSE) was found to be only 0.0146.
基金support from the National Hi-Tech R&D Program(863 Program)Ministry of Science & Technology,China(2006AA05Z109)+2 种基金Shanghai Science and Technology Bureau(071605122)Shanghai Education Committee(07ZZ156)GRAP09,Northeast Forestry University are gratefully acknowledged
文摘Molasses wastewater was evaluated as substrate for biohydrogen production by anaerobic fermentation in a novel continuous mixed attached growth reactor ( CMAGR ) with aeration pretreated sludge attached onto granular activated carbon under continuous flow condition.It was indicated that the CMAGR system was operated at the conditions of influent COD of 2000~6000mg / L , hydraulic retention time ( HRT ) of 6hand temperature of 35 ℃ , when the pH value and oxidation-reduction potential ( ORP ) ranged from 4.16and-434 mV respectively , stable ethanol-type fermentation was formed with the sum of ethanol and acetate concentration ratio of 89.3%to the total liquid products after 40days operation.The H 2 content in biogas and chemical oxygen demand ( COD ) removal were estimated to be 46.6% and 13% , respectively.It was also investigated that the effects of organic loading rates ( OLRs ) on CMAGR hydrogen production system.It was found that hydrogen production yield increased from 3.72 mmol / hL to 12.51 mmol / hL as OLRs increased from 8 kg / m 3 d to 32 kg / m 3 d.The maximum hydrogen production rate of 12.51mmol / hL at a OLR of 32kg / m 3 d and the maximum hydrogen yield by substrate consumed was 130.57 mmol / mol happened at OLR of 16 kg / m 3 d.Greater pHs appeared to be favour to butyrate production and the maximum of 0.51mol / mol was obtained at pH of 4.14.However , ethanol / acetate ratio was greater than 1.1at pH fluctuated between 3.4 - 3.6and 4.1 - 4.4which indicated that these pHs were favour to ethanol type fermentation.Therefore , the continuous mixed attached growth reactor ( CMAGR ) could be a promising attached growth system for biohydrogen fermentation.