Vibration Suppression for Active Magnetic Bearings Using Adaptive Filter with Iterative Search Algorithm

Active Magnetic Bearing(AMB) is a kind of electromagnetic support that makes the rotor movement frictionless and can suppress rotor vibration by controlling the magnetic force. The most common approach to restrain the rotor vibration in AMBs is to adopt a notch filter or adaptive filter in the AMB controller. However, these methods cannot obtain the precise amplitude and phase of the compensation current. Thus, they are not so effective in terms of suppressing the vibrations of the fundamental and other harmonic orders over the whole speed range. To improve the vibration suppression performance of AMBs,an adaptive filter based on Least Mean Square(LMS) is applied to extract the vibration signals from the rotor displacement signal. An Iterative Search Algorithm(ISA) is proposed in this paper to obtain the corresponding relationship between the compensation current and vibration signals. The ISA is responsible for searching the compensating amplitude and shifting phase online for the LMS filter, enabling the AMB controller to generate the corresponding compensation force for vibration suppression. The results of ISA are recorded to suppress vibration using the Look-Up Table(LUT) in variable speed range. Comprehensive simulations and experimental validations are carried out in fixed and variable speed range, and the results demonstrate that by employing the ISA, vibrations of the fundamental and other harmonic orders are suppressed effectively.

COMPENSATION CONTROL OF REAL-TIME UNBALANCE FORCE FOR ACTIVE MAGNETIC BEARING SYSTEM

Aiming at the stability and others properties of active magnetic bearing （AMB） system influenced by the periodic unbalance stimulation synchronous with rotor rotational speed, a new real-time adaptive feed-forward unbalance force compensation scheme is proposed based on variable step-size least mean square（LMS） algorithm as the feed-forward compensation controller. The controller can provide some suitable sinusoidal signals to com- pensate the feedback unbalance response signals synchronous with the rotary frequency, then reduce the fluctua- tion of the control currents and weaken the active control of AMB system. The variable step-size proportional to the rotational frequency is deduced by analyzing the principle of normal LMS algorithm and its deficiency in the application of real-time filtering of AMB system. Experimental results show that the new method can implement real-time unbalance force compensation in a wide frequency band, reduce the effect of unbalance stimulant force on the housing of AMB system, and provide convenience to improve rotational speed.

Improving Kinetic Energy Storage for Vehicles through the Combination of Rolling Element and Active Magnetic Bearing

The demand for short term energy storage providing high power for electric and hybrid-electric vehicles is increasing drastically. Stationary FESS （flywheel energy storage systems） is established as UPS （uninterruptible power supply） and represent an emerging market. In contrast, mobile FESSs are currently only used in a few application, e.g., in motor sports. To enable a wider use in personal and public transportation the life-span of the flywheel＇s bearings needs to be increased significantly. This paper presents an alternative approach to extend the lifespan of the flywheel＇s bearings significantly by using a CREAMB （combination of rolling element and active magnetic bearings）.

Unbalance Vibratory Displacement Compensation for Active Magnetic Bearings

As the dynamic stiffness of radial magnetic bearings is not big enough, when the rotor spins at high speed, unbalance displacement vibration phenomenon will be produced. The most effective way for reducing the displacement vibration is to enhance the radial magnetic bearing stiffness through increasing the control currents, but the suitable control currents are not easy to be provided, especially, to be provided in real time. To implement real time unbalance displacement vibration compensation, through analyzing active magnetic bearings （AMB） mathematical model, the existence of radial displacement runout is demonstrated. To restrain the runout, a new control scheme-adaptive iterative learning control （A1LC） is proposed in view of rotor frequency periodic uncertainties during the startup process. The previous error signal is added into AILC learning law to enhance the convergence speed, and an impacting factor/3 influenced by the rotor rotating frequency is introduced as learning output coefficient to improve the rotor control effects, As a feed-forward compensation controller, AILC can provide one tmknown and perfect compensatory signal to make the rotor rotate around its geometric axis through power amplifier and radial magnetic bearings. To improve AMB closed-loop control system robust stability, one kind of incomplete differential PID feedback controller is adopted. The correctness of the AILC algorithm is validated by the simulation of AMB mathematical model adding AILC compensation algorithm through MATLAB soft. And the compensation for fixed rotational frequency is implemented in the actual AMB system. The simulation and experiment results show that the compensation scheme based on AILC algorithm as feed-forward compensation and PID algorithm as close-loop control can realize AMB system displacement minimum compensation at one fixed frequency, and improve the stability of the control system. The proposed research provides a new adaptive iterative/earning control algorithm and control strategy for AMB displacement minimum compensation, and provides some references for time-varied displacement minimum compensation.

RESEARCH ON CONTROL OF FLYWHEEL SUSPENDED BY ACTIVE MAGNETIC BEARING SYSTEM WITH SIGNIFICANT GYROSCOPIC EFFECTS

Traditional PID controllers are no longer suitable formagnetic-bearing-supported high-speed flywheels with significant gyroscopic effects. Becausegyroscopic effects greatly influence the stability of the flywheel rotor, especially at highrotational speeds. Velocity cross feedback and displacement cross feedback are used to overcomeharmful effects of nutation and precession modes, and stabilize the rotor at high rotational speeds.Theoretical analysis is given to show their effects. A control platform based on RTLinut and a PCis built to control the active magnetic bearing (AMB) system, and relevant results are reported.Using velocity cross feedback and displacement cross feedback in a closed loop control system, theflywheel successfully runs at over 20000 r/min.

Real-time Feed-forward Force Compensation for Active Magnetic Bearings System Based on H∞ Controller

There are two kinds of unbalance vibrations—force vibration and displacement vibration due to the existence of unbalance excitation in active magnetic bearings（AMB） system. And two unbalance compensation methods—closed-loop feedback and open loop feed-forward are presented to reduce the force vibration. The transfer function order of the control system directly influencing the system stability will be increased when the closed-loop method is adopted, which makes the real-time compensation not easily achieved. While the open loop method would not increase the primary transfer function order, it provides conditions for real-time compensation. But the real-time compensation signals are not easy to be obtained in the open loop method. To implement real-time force compensation, a new method is proposed to reduce the force vibration caused by the rotor unbalance on the basis of AMB active control. The method realizes real-time and on-line force auto-compensation based on H∞ controller and one novel feed-forward compensation controller, which makes the rotor rotate around its inertia axis. The time-variable feed-forward compensatory signal is provided by a modified adaptive variable step-size least mean square（VSLMS） algorithm. And the relevant least mean square（LMS） algorithm parameters are used to solve the H∞ controller weighting functions. The simulation of the new method to compensate some frequency-variable and sinusoidal signals is completed by MATLAB programming, and real-time compensation is implemented in the actual AMB experimental system. The simulation and experiment results show that the compensation scheme can improve the robust stability and the anti-interference ability of the whole AMB system by using H∞ controller to achieve close-loop control, and then real-time force unbalance compensation is implemented. The proposed research provides a new control strategy containing real-time algorithm and H∞ controller for the force compensation of AMB system. And the stability of the control system is finally improved.

Experimental Study of Active Magnetic Bearing on a 150 M^(3)Turbo Oxygen Gas Expander

This paper is concerned with the investigation, experiment and design analyses on the application of active magnetic bearings for a 150M 3 turbo oxygen gas expander having 1.16 kg weight and 30 mm diameter rotor, which was supported by two aerostatic bearings formerly. Now, the machine can work steady at a rotation speed of 92,000 r/min, and can be run up to a maximum rotation speed of 104,000 r/min.

Variable Parameters PD Control and Stability of a High Rate Rigid Rotor-Journal Active Magnetic Bearing System

Stability is a key problem that means whether a high rate rotor-active magnetic bearings system works reliably or not. Aiming at a bearings system described with nonlinear equations, this paper built a linear model according to the system behavior. Considering realization of the control system and behavior of a high rate rotor system (magnetic force is far smaller than input force produced by mass eccentricity) this paper proposes a design method of variable parameters PD control algorithm that can be used universally. The control system was simplified and a mass of adjusting work of control parameters was reduced. Analysis and simulation indicated that the bearings system could get a wider stable region of harmonic motion, and proved that the algorithm is robust and advanced. The control system can be realized because the winding electric currents are positive. The method is convenient for operation and can easily be used for engineering practice.

TRANSIENT RESPONSE OF FLEXIBLE ROTOR WITH ACTIVE MAGNETIC BEARINGS DURING ROTOR DROP

A new technique so-called finite modes condensation based on modal analysis is presented to simplify a long and complicated rotor system with distributed mass into a simplified rotor model with adjustablenumber of degrees of freedom. By means of this new method, a practical example study shows that it can bedone to calculate transient response for any cross-section of a flexible rotor with enough accuracy during itsdrop in case that there exist several active magnetic bearings and traditional bearings.

Analysis on Dynamic Performance for Active Magnetic Bearing-Rotor System

In the application of active magnetic bearings (AMB), one of the key problems to be solved is the safety and stability in the sense of rotor dynamics. The project related to the present paper deals with the method for analyzing bearing rotor systems with high rotation speed and specially supported by active magnetic bearings, and studies its rotor dynamics performance, including calculation of the natural frequencies with their distribution characteristics, and the critical speeds of the system. One of the targets of this project is to formulate a theory and method valid for the analysis of the dynamic performance of the active magnetic bearing rotor system by combining the traditional theory and method of rotor dynamics with the analytical theory and design method based on modern control theory of the AMB system.

Research on heat dissipation characteristics of magnetic fluid bearings under multiple field coupling effects

This paper analyzes the sources of heat losses in magnetic fluid bearings,proposes various cou-pling relationships of physical fields,divides the coupled heat transfer surfaces while ensuring the continuity of heat flux density,and analyzes the overall heat dissipation pathways of the bearings.By changing parameters such as input current,rotor speed,and inlet oil flow rate,the study applies a multi-physics field coupling method to investigate the influence of different parameters on the temper-ature field and heat dissipation patterns of the bearings,which is then validated through experi-ments.This research provides a theoretical basis for the optimal design of magnetic fluid bearing sys-tems.

STUDY ON CATASTROPHIC MECHANISM FOR ROTOR DROP TRANSIENT VIBRATION FOLLOWING MAGNETIC BEARING FAILURE

The nonlinear and transient vibration of a rotor, which dropped onto back-up bearings when its active magnetic bearings were out of order, was investigated. After strictly deriving its equations of motion and performing numerical simulations, the time-histories of rotating speed of the dropping rotor, and normal force at the rubbing contact point as well as the frequency spectrum of the vibration displacement of back-up bearings are fully analyzed. It is found that the strong and unsteady forced bending vibration of the unbalanced and, damped rotor decelerating through : its first. bending vibtation of the unbalanced and, damped rotor decelerating through its,first critical speed as well as chattering at high frequencies caused by the nonlinearity at the rubbing contact point between, the journal and back-up bearings may lead to the catastrophic damage. of the system.

Modeling and Analysis of Novel Integrated Radial Hybrid Magnetic Bearing for Magnetic Bearing Reaction Wheel

Conventional ball bearing reaction wheel used to control the attitude of spacecraft can＇t absorb the centrifugal force caused by imbalance of the wheel rotor,and there will be a torque spike at zero speed,which seriously influences the accuracy and stability of spacecraft attitude control.Compared with traditional ball-bearing wheel,noncontact and no lubrication are the remarkable features of the magnetic bearing reaction wheel,and which can solve the high precision problems of wheel.In general,two radial magnetic bearings are needed in magnetic bearing wheel,and the design results in a relatively large axial dimension and smaller momentum-to-mass ratios.In this paper,a new type of magnetic bearing reaction wheel（MBRW） is introduced for satellite attitude control,and a novel integrated radial hybrid magnetic bearing（RHMB） with permanent magnet bias is designed to reduce the mass and minimize the size of the MBRW,etc.The equivalent magnetic circuit model for the RHMB is presented and a solution is found.The stiffness model is also presented,including current stiffness,position negative stiffness,as well as tilting current stiffness,tilting angular position negative stiffness,force and moment equilibrium equations.The design parameters of the RHMB are given according to the requirement of the MBRW with angular momentum of 30 N ？ m ？ s when the rotation speed of rotor reaches to 5 kr/min.The nonlinearity of the RHMB is shown by using the characteristic curves of force-control current-position,current stiffness,position stiffness,moment-control current-angular displacement,tilting current stiffness and tilting angular position stiffness considering all the rotor position within the clearance space and the control current.The proposed research ensures the performance of the radial magnetic bearing with permanent magnet bias,and provides theory basis for design of the magnetic bearing wheel.

CONTROL SYSTEM OF MAGNETIC BEARINGS BASED ON LINEAR QUADRATIC METHOD OF OPTIMAL CONTROL STRATEGY

A state equation for radical 4-degree-of-freedom active magnetic bearings isbuilt, and the approach on how to use linear quadratic method of optical control theory to design acentralized and decentralized parameters control system is introduced, and also Matlab language isused to simulate and analyze. The simulation results have proved that the differences are smallbetween centralized parameters and decentralized parameters control system. The conclusions ofexperiments have shown that decentralized controllers designed from optimal state feedback theorymeet the requirements of active magnetic bearing system. The vibration amplitude of the rotor isabout 20 mu m when the speed of the rotor runs between 0 to 60 000 r/min. This method may be used inthe study and design of controllers of magnetic bearings.

Synchronous Vibration Suppression of Magnetic Bearing Systems without Angular Sensors

Active Magnetic Bearing(AMB)levitates rotor by magnetic force without friction,and it can provide active control force to suppress vibration while rotating.Most of vibration suppressing methods need angular speed sensors to obtain rotating speed,but in many occasions,angular speed sensor is difficult to install or is difficult to guarantee reliability.This paper proposed a vibration suppressing strategy without angular speed sensor based on generalized integrator and frequency locked loop(GI-FLL)and phase shift generalized integrator(PSGI).GI-FLL and high-pass filter estimate frequency from control current,PSGI is applied to generate compensating signal.Firstly,model of AMB system expressed by transfer function is established and effect of centrifugal force is analyzed.Then,principle and process of vibration suppressing strategy is introduced.Influence of parameters are analyzed by root locus and bode diagram.Simulation results display the process of frequency estimation and performance of displacement.Experiments are carried on a test rig,results of simulations and experiments demonstrate the effectiveness of proposed vibration suppressing strategy.

Mechanical Characteristics of a Thrust Magnetic Bearing

Static and dynamic mechanical characteristics of a thrust magnetic bearing are studied owing to the inclination of the runner disk. The application refers to a thrust magnetic bearing for a turbo expander/compressor. The static tilt of the runner disk has remarkable influence on the mechanical characteristics of thrust magnetic bearing, it can change the static load distribution between two radial magnetic bearings and will exert violent coupling effect among a thrust magnetic bearing and two radial magnetic bearings. Such a finding can be used for the coupled electromechanical dynamics analysis of rotor system equipped with magnetic bearings.

Dynamic Responses of Rotor Drops onto Double-decker Catcher Bearing

In an active magnetic bearing （AMB） system, the catcher bearings （CBs） are indispensable to protect the rotor and stator in case the magnetic bearings fail. Most of the former researches associated with CBs are mainly focused on the dynamic responses of the rotor drops onto traditional single-decker catcher bearings （SDCBs）. But because of the lower limited speed of SDCB, it cannot withstand the ultra high speed rotation after rotor drop. In this paper, based on the analysis of the disadvantages of SDCBs, a new type of double-decker catcher bearings （DDCBs） is proposed to enhance the CB work performance in AMB system. In order to obtain thc accurate rotor movements before AMB failure, the dynamic characteristics of AMB are theoretically derived. Detailed simulation models containing rigid rotor model, contact model between rotor and inner race, DDCB force model as well as heating model after rotor drop are established. Then, using those established models the dynamic responses of rotor drops onto DDCBs and SDCBs are respectively simulated. The rotor orbits, contact forces, spin speeds of various parts and heat energies after AMB failure are mainly analyzed. The simulation results show that DDCBs can effectively improve the CBs limit rotational speed and reduce the following vibrations, impacts and heating. Finally, rotor drop experiments choosing different types of CBs are carried out on the established AMB test bench. Rotor orbits, inner race temperatures as well as the rotating speeds of both inner race and intermediate races after rotor drop are synchronously measured. The experiment results verify the advantages of DDCB and the correctness of theoretical analysis. The studies provide certain theoretical and experimental references for the application of DDCBs in AMB system.

MATLAB WEB SERVER AND ITS APPLICATION IN REMOTE COLLABORATIVE DESIGN OF MAGNETIC BEARING SYSTEMS

Acclimatizing itself to the development of network,Math Works Inc constructed a MATLAB Web Server environment by dint of which one can browse the calculation and plots of MATLAB through Internet directly.The installation and use of the environment is introduced.A code established on the platform of MATLAB,which deals with the modal analysis of magnetic bearing system(MBS) supporting rotors of five degrees of freedom and considering the coupling of thrust bearing with radical bearings is modified to work in the environment.The purpose is to realize a remote call of the code by users through Internet for the performance analysis of the system.Such an application is very important to the concurrent design of MBS and for the utilization of distributive knowledge acquisition resources in collaborative design.The work on modification and realization is described and the results are discussed.

Estimation of optimum operating point for thrust magnetic bearing with solid magnet

A carrying capacity-temperature rise analysis model has been established for analysis of the carrying capacity, temperature rise and carrying capacity-temperature rise characteristic of a thrust magnetic bearing with solid magnet. The results indicate that there must be an optimal operating point for the thrust magnetic bearing with solid magnet. The main factors having effect on carrying capacity-temperature rise include static gap and/or ampere-turns. With proper static gap chosen, the bearing can be run near the optimal operating point by adjhusting ampere-turns, thereby optimizing the bearing properties.

Design Method for the Magnetic Bearing Control System with Fuzzy-PID Approach

The five degree freedom magnetic bearing is researched and its structure and working principles are introduced also. Based on the fuzzy control technology, combining fuzzy algorithm and PID control method, identifying the transition process mode of the online system to get the PID parameters＇ self-adjusting, the magnetic beating system＇s Fuzzy-PID nonlinear controller is designed by analyzing the system control demands. The Fuzzy-PID nonlinear controller can deal with the magnetic bearing system＇ s open loop instability and strong nonlinearity, and the approach could improve the system＇s rapidity, adaptability, stability and dynamic characteristics. Comparative analysis and experiments are conducted between linear PID and nonlinear fuzzy- PID control methods, the results show that the fuzzy-PID controller is better, and the five-freedom magnetic bearing＇ s rotary precision experiments are conducted by the fuzzy-PID controller, it satisfies the control rotary precision demands and realizes the hearing＇s steady floating and rotating.