COMPENSATION CONTROL OF REAL-TIME UNBALANCE FORCE FOR ACTIVE MAGNETIC BEARING SYSTEM

Aiming at the stability and others properties of active magnetic bearing （AMB） system influenced by the periodic unbalance stimulation synchronous with rotor rotational speed, a new real-time adaptive feed-forward unbalance force compensation scheme is proposed based on variable step-size least mean square（LMS） algorithm as the feed-forward compensation controller. The controller can provide some suitable sinusoidal signals to com- pensate the feedback unbalance response signals synchronous with the rotary frequency, then reduce the fluctua- tion of the control currents and weaken the active control of AMB system. The variable step-size proportional to the rotational frequency is deduced by analyzing the principle of normal LMS algorithm and its deficiency in the application of real-time filtering of AMB system. Experimental results show that the new method can implement real-time unbalance force compensation in a wide frequency band, reduce the effect of unbalance stimulant force on the housing of AMB system, and provide convenience to improve rotational speed.

An Efficient Crash Recovery Technique for Real-Time Main Memory Database

This paper presents an efficient recovery scheme suitable for real-time mainmemory database. In the recovery scheme, log records are stored in non-volatile RAM which is dividedinto four different partitions based on transaction types. Similarly, a main memory database isdivided into four partitions based data types. When the using ratio of log store area exceeds thethreshold value, checkpoint procedure is triggered. During executing checkpoint procedure, someuseless log records are deleted. During restart recovery after a crash, partition reloading policyis adopted to assure that critical data are reloaded and restored in advance, so that the databasesystem can be brought up before the entire database is reloaded into main memory. Therefore downtime is obvionsly reduced. Simulation experiments show our recovery scheme obviously improves thesystem performance, and does a favor to meet the dtadlints of real-time transactions.

Scheduling transactions in mobile distributed real-time database systems

A DMVOCC-MVDA （distributed multiversion optimistic concurrency control with multiversion dynamic adjustment） protocol was presented to process mobile distributed real-time transaction in mobile broadcast environments. At the mobile hosts, all transactions perform local pre-validation. The local pre-validation process is carried out against the committed transactions at the server in the last broadcast cycle. Transactions that survive in local pre-validation must be submitted to the server for local final validation. The new protocol eliminates conflicts between mobile read-only and mobile update transactions, and resolves data conflicts flexibly by using multiversion dynamic adjustment of serialization order to avoid unnecessary restarts of transactions. Mobile read-only transactions can be committed with no-blocking, and respond time of mobile read-only transactions is greatly shortened. The tolerance of mobile transactions of disconnections from the broadcast channel is increased. In global validation mobile distributed transactions have to do check to ensure distributed serializability in all participants. The simulation results show that the new concurrency control protocol proposed offers better performance than other protocols in terms of miss rate, restart rate, commit rate. Under high work load （think time is ls） the miss rate of DMVOCC-MVDA is only 14.6%, is significantly lower than that of other protocols. The restart rate of DMVOCC-MVDA is only 32.3%, showing that DMVOCC-MVDA can effectively reduce the restart rate of mobile transactions. And the commit rate of DMVOCC-MVDA is up to 61.2%, which is obviously higher than that of other protocols.

Real-time Design Constraints in Implementing Active Vibration Control Algorithms

Although computer architectures incorporate fast processing hardware resources, high performance real-time implementation of a complex control algorithm requires an efficient design and software coding of the algorithm so as to exploit special features of the hardware and avoid associated architecture shortcomings. This paper presents an investigation into the analysis and design mechanisms that will lead to reduction in the execution time in implementing real-time control algorithms. The proposed mechanisms are exemplified by means of one algorithm, which demonstrates their applicability to real-time applications. An active vibration control （AVC） algorithm for a flexible beam system simulated using the finite difference （FD） method is considered to demonstrate the effectiveness of the proposed methods. A comparative performance evaluation of the proposed design mechanisms is presented and discussed through a set of experiments.

Real-Time Method for Detecting Harmonic and Reactive Currents of Single-Phase Circuits

According to the characteristics of single-phase circuits and demand of using active filter for real-time detecting harmonic and reactive currents, a detecting method based on Fryze＇s power definition is proposed. The results of theoretical analysis and simula- tion show that the proposed method is effective in realtime detecting of instantaneous harmonic and reactive currents in single-phase circuits. When only detecting the total reactive currents, this method does not need a phase-locked loop circuit, and it also can be used in some special applications to provide different compensations on the ground of different requirements of electric network. Compared with the other methods based on the theory of instantaneous reactive power, this method is simple and easy to realize.

Validation concurrency control protocol in parallel real-time database systems

In parallel real-time database systems, concurrency control protocols must satisfy time constraints as well as the integrity constraints. The authors present a validation concurrency control(VCC) protocol, which can enhance the performance of real-time concurrency control mechanism by reducing the number of transactions that might miss their deadlines, and compare the performance of validation concurrency control protocol with that of HP2PL(High priority two phase locking) protocol and OCC-TI-WAIT-50(Optimistic concurrency control-time interval-wait-50) protocol under shared-disk architecture by simulation. The simulation results reveal that the protocol the author presented can effectively reduce the number of transactions restarting which might miss their deadlines and performs better than HP2PL and OCC-TI-WAIT-50. It works well when arrival rate of transaction is lesser than threshold. However, due to resource contention the percentage of missing deadline increases sharply when arrival rate is greater than the threshold.

A dynamic crash recovery scheme for distributed real-time database systems

Recovery performance in the event of failures is very important for distributed real-time database systems. This paper presents a time-cognizant logging-based crash recovery scheme （TCLCRS） that aims at distributed real-time databases, which adopts a main memory database as its ground support. In our scheme, each site maintains a real-time log for local transactions and the subtransactions, which execute at the site, and execte local checkpointing independently. Log records are stored in non-volatile high- speed store, which is divided into four different partitions based on transaction classes. During restart recovery after a site crash, partitioned crash recovery strategy is adopted to ensure that the site can be brought up before the entire local secondary database is reloaded in main memory. The partitioned crash recovery strategy not only guarantees the internal consistency to be recovered, but also guarantee the temporal consistency and recovery of the sates of physical world influenced by uncommitted transactions. Combined with two- phase commit protocol, TCLCRS can guarantee failure atomicity of distributed real-time transactions.

Incorporating Fuzzy Inference in Active Database Rules

Active databases react to stimulation, or event from inside or outside the system without user or application interference through Events Conditions Actions(ECA) rules (triggers). ECA rule is defined as: ON event IF condition THEN action, which means when an event happens, if the condition is satisfied then the corresponding action is executed. The nature of ECA rule makes it an appropriate means to model dynamic character of systems, as gained much studies during recent years. Traditional ECA rule is crisp, which means their events, condition (s) and action(s) are accurate. As indicate that ECA rules can only represent precise knowledge. But knowledge is usually fuzzy in engineering. A concept of fuzzy ECA rules characterized with fuzzy event, fuzzy condition and fuzzy action is proposed in this article.The realization avenues of fuzzy triggers are discussed. The work we have done blazes a way in representing approximate syntax in active database application systems. At last a case of 'overheating alarm' is given to illustrate the approach.

Quasi Serializable Concurrency Control in Distributed Real-Time Database Systems

This paper formally defines and analyses the new notion of correctness called quasi serializability, and then outlines corresponding concurrency control protocol QDHP for distributed real-time databases. Finally, through a series of simulation studies, it shows that using the new concurrency control protocol the performance of distributed real-time databases can be much improved.

Real-Time Detection of Unstable Control Loop Behavior in a Feedback Active Noise Cancellation System for In-Ear Headphones

Active noise controls are used in a wide field of applications to cancel out unwanted surrounding noise. Control systems based on the feedback structure however have the disadvantage that they may become unstable during run-time due to changes in the control path—in this context including the listener’s ear. Especially when applied to active noise cancellation (ANC) headphones, the risk of instability is associated with the risk of harmful influence on the listener’s ear, which is exposed to the speaker in striking distance. This paper discusses several methods to enable the analysis of a feedback ANC system during run-time to immediately detect instability. Finally, a solution is proposed, which identifies the open loop behavior parametrically by means of an adaptive filter to subsequently evaluate the coefficients regarding stability.

An Introduction to the Latest-generation Spatial Database of Active Tectonics of China

Based on ArcGIS and MapInfo software, we digitized the active tectonics map (1:4,000,000) of China, which was compiled and revised by academician Deng Qidong, and built the spatial database of active tectonics of China. The database integrates rich active tectonic data, such as a catalogue of earthquakes with magnitude above 6.0, active faults, Quaternary basins, active folds and their associated attribute parameters, and implements scientific and effective management to this data. At the same time, the spatial database joins the spatial map data and the associated attribute data together, which implements the data query between spatial properties and attribute parameters and also makes it possible to perform spatial analysis with different data layers. These provide much convenience for earthquake study and allows engineering construction institutions to use this data in practical applications.

Intercross real-time control strategy in alternating activated sludge process for short-cut biological nitrogen removal treating domestic wastewater

To develop technically feasible and economically favorable dynamic process control(DPC)strategies for an alternating activated sludge(AAS)system,a bench-scale continuous-flow alternating aerobic and anoxic reactor,performing short-cut nitrogen removal from real domestic wastewater was operated under different control strategies for more than five months.A fixed-time control(FTC) study showed that bending-points on pH and oxidation-reduction potential(ORP)profiles accurately coincided with the major biologic...

基于ActiveX技术的教务/学生管理Web数据库应用系统的分析与设计

分析了B/S模式的Web数据库应用系统中的ActiveX技术的应用 ,并根据ActiveX技术的运行环境和特点利用构件化程序设计方法分析和设计了教务

Safety-assured,real-time neural active fault management for resilient microgrids integration

Federated-learning-based active fault management(AFM)is devised to achieve real-time safety assurance for microgrids and the main grid during faults.AFM was originally formulated as a distributed optimization problem.Here,federated learning is used to train each microgrid’s network with training data achieved from distributed optimization.The main contribution of this work is to replace the optimization-based AFM control algorithm with a learning-based AFM control algorithm.The replacement transfers computation from online to offline.With this replacement,the control algorithm can meet real-time requirements for a system with dozens of microgrids.By contrast,distributed-optimization-based fault management can output reference values fast enough for a system with several microgrids.More microgrids,however,lead to more computation time with optimization-based method.Distributed-optimization-based fault management would fail real-time requirements for a system with dozens of microgrids.Controller hardware-in-the-loop real-time simulations demonstrate that learning-based AFM can output reference values within 10 ms irrespective of the number of microgrids.

使用Oracle Active Data Guard实现PMS2.0数据库读写分离初探

文章研究了使用Oracle Active Data Guard实现PMS2.0数据库读写分离。生产管理系统PMS是电力信息系统中重要的核心业务系统,随着数据量不断快速增长,数据库的I/O吞吐量以及资源的耗用愈发凸显性能瓶颈,造成业务用户并发操作延时甚至失败。传统的单节点数据库或ORACLE RAC集群已无法应对。根据目前成熟的业界解决方案,采用读写分离的方式,可以有效解决这个问题。

VB调用ActiveX进行VFP数据库开发

介绍了VB6.0中常用的三种数据库访问技术,通过分析ADO技术的工作原理,给出了利用VB6.0的 ActiveX数据库控件进行 VFP数据库应用开发的主要技术和实现方法。

Applying real-time control to enhance the performance of nitrogen removal in CAST system

A bench-scale reactor（72 L） red with domestic sewage, was operated more than 3 months with three operation modes： traditional mode, modified mode and real-time control mode, so as to evaluate effects of the operation mode on the system performance and to develop a feasible control strategy. Results obtained from fixed-time control study indicate that the variations of the pH and oxidation-reduction potential（ORP） profiles can represent dynamic characteristics of system and the cycle sequences can be controlled and optimized by the control points on the pH and ORP profiles. A control strategy was, therefore, developed and applied to real-time control mode. Compared with traditional mode, the total nitrogen（TN） removal can be increased by approximately 16% in modified mode and a mean TN removal of 92% was achieved in real-time control mode. Moreover, approximately 12.5% aeration energy was saved in real- time control mode. The result of this study shows that the performance of nitrogen removal was enhanced in modified operation mode. Moreover, the real-time control made it possible to optimize process operation and save aeration energy.

A sensor transaction scheduling algorithm for maintaining real-time data temporal validity

A new scheduling algorithm called deferrable scheduling with time slice exchange (DS-EXC) was proposed to maintain the temporal validity of real-time data. In DS-EXC, the time slice exchange method was designed to further defer the release time of transaction instances derived by the deferrable scheduling algorithm (DS-FP). In this way, more CPU time would be left for lower priority transactions and other transactions. In order to minimize the scheduling overhead, an off-line scheme was designed. In particular, the schedule for a transaction set is generated off-line until a repeating pattern is found, and then the pattern is used to construct the schedule on-line. The performance of DS-EXC was evaluated by sets of experiments. The results show that DS-EXC outperforms DS-FP in terms of increasing schedulable ratio. It also provides better performance under mixed workloads.

An Efficient Secure Real-Time Concurrency Control Protocol

Secure real-time databases must simultaneously satisfy two requirements in guaranteeing data security and minimizing the missing deadlines ratio of transactions. However, these two requirements can conflict with each other and achieve one requirement is to sacrifice the other. This paper presents a secure real-time concurrency control protocol based on optimistic method. The concurrency control protocol incorporates security constraints in a real-time optimistic concurrency control protocol and makes a suitable tradeoff between security and real-time requirements by introducing secure influence factor and real-time influence factor. The experimental results show the concurrency control protocol achieves data security without degrading real-time perform ance significantly.

Active并发控制—分布事务管理的目标统一

本文综述了当前分布式数据库(DDB)并发控制研究状况。提出了一种比较接近真实的DDBMS参考模型,在此基础上对典型的分布并发控制策略作出正确的集成。最后给出了Active并发控制的实现方案。