Key Techniques and Applications of Adaptive Growth Method for Stiffener Layout Design of Plates and Shells

The application of the adaptive growth method is limited because several key techniques during the design process need manual intervention of designers. Key techniques of the method including the ground structure construction and seed selection are studied, so as to make it possible to improve the effectiveness and applicability of the adaptive growth method in stiffener layout design optimization of plates and shells. Three schemes of ground structures, which are comprised by different shell elements and beam elements, are proposed. It is found that the main stiffener layouts resulted from different ground structures are almost the same, but the ground structure comprised by 8-nodes shell elements and both 3-nodes and 2-nodes beam elements can result in clearest stiffener layout, and has good adaptability and low computational cost. An automatic seed selection approach is proposed, which is based on such selection rules that the seeds should be positioned on where the structural strain energy is great for the minimum compliance problem, and satisfy the dispersancy requirement. The adaptive growth method with the suggested key techniques is integrated into an ANSYS-based program, which provides a design tool for the stiffener layout design optimization of plates and shells. Typical design examples, including plate and shell structures to achieve minimum compliance and maximum bulking stability are illustrated. In addition, as a practical mechanical structural design example, the stiffener layout of an inlet structure for a large-scale electrostatic precipitator is also demonstrated. The design results show that the adaptive growth method integrated with the suggested key techniques can effectively and flexibly deal with stiffener layout design problem for plates and shells with complex geometrical shape and loading conditions to achieve various design objectives, thus it provides a new solution method for engineering structural topology design optimization.

Geometry and size optimization of stiffener layout for three-dimensional box structures with maximization of natural frequencies

Based on the growth mechanism of natural biological branching systems and inspiration from the morphology of plant root tips,a bionic design method called Improved Adaptive Growth Method(IAGM)has been proposed in the authors’previous research and successfully applied to the reinforcement optimization of three-dimensional box structures with respect to natural frequencies.However,as a kind of ground structure methods,the final layout patterns of stiffeners obtained by using the IAGM are highly subjected to their ground structures,which restricts the optimization effect and freedom to further improve the dynamic performance of structures.To solve this problem,a novel post-processing geometry and size optimization approach is proposed in this article.This method takes the former layout optimization result as start,and iteratively finds the optimal layout angles,locations,and lengths of stiffeners with a few design variables by optimizing the positions of some specific node lines called active node lines.At the same time,thick-nesses of stiffeners are also optimized to further improve natural frequencies of three-dimensional box structures.Using this method,stiffeners can be successfully separated from their ground structures and further effectively improve natural frequencies of three-dimensional box structures with less material consumption.Typical numerical examples are illustrated to validate the effectiveness and advantages of the suggested method.