Recognition of an additional mechanism leading to myocardial abnormalities

A growing body of evidence explicitly suggests the significant role of inflammatory processes in the development and progressive deterioration of vascular diseases and cardiomyopathies.1-3 In recent years, a large variety of infections have been reported to be associated with the development of cardiomyopathy; the pathogenic factors include rickets, bacteria, protozoa and other parasites,and also, at least 17 viruses.2。

Stereoselective Addition of N-Alkylhydroxylamines to α,β-Unsaturated Nitro Compounds

N-Alkylhydroxylamines have been shown to undergo a stereospecific cis addition to 1-phenyl-2 -nitropropene compounds, whereas the corresponding O-alkylhydroxylamines give no diastereoselectivity. The concerted addition mechanism was provided to explain the difference.

Influence of Rare Earth(Ce and La) Addition on the Performance of Al-3.0 wt%Mg Alloy

The influences of rare earth elements（cerium and lanthanum） on the microstructure and phases of Al-3.0 wt%Mg alloys used for electromagnetic shielding wire were characterized by scanning electron microscopy（SEM）, energy-dispersive spectroscopy（EDS）, X-ray diffraction（XRD） and differential scanning calorimetry（DSC）. The mechanical properties and electrical resistivity were also investigated. The results indicated that a certain content of rare earth could improve the purification of the aluminum molten, enhance the strength, and reduce the electrical resistivity of Al-3.0 wt%Mg alloys. The strength reached the top value when RE content was 0.3 wt% while the alloy with 0.2 wt% RE addition had the smallest electrical resistivity. The elongation varied little when RE addition was no more than 0.2 wt%. But the excessive addition of rare earth would be harmful to the microstructure and properties of Al-3.0 wt%Mg alloys.

Improving Densification and Mechanical Properties of FeAl/TiC Composites by Addition of Ni

FeAl/TiC composites were fabricated by hot pressing blended elemental powders. The effects of Ni-doping on thedensification and mechanical properties of the composites were studied. Results show that the density of the composites decreases with the content of TiC increasing, and the addition of Ni significantly improves the densificationprocess by enhancing mass transfer in the bonding phase. The mechanical properties of the composites are closelyrelated with their porosity. Besides increasing the density of the composites, the addition of Ni improves the mechanical properties by other three effects: solution-strengthening the bonding phase, strengthening the FeAI-TiC interfaceand increasing ductile fracture in FeAl phase.

Effects of A1 Additions on Microstructure and Mechanical Properties of MoSi_2

The effects of Al additions on the microstructure and mechanical properties of MoSi2 have been studied. With the A1 additions from 2.5 wt pct to 5 wt pct, the siliceous grain boundary phase in hot pressed samples was eliminated because of the formation of Al2O3 particles. It was shown that Al and SiO2 reacted at 860℃. During the reaction, A1 atoms were mainly transferred to Al2O3 particles, and to some extent, diffused into MoSi2 grains. Both the toughness and strength of Al containing composites exceeded those of pure MoSi2 material. Bending strength and fracture toughness reach the highest value of 350 MPa, 4.05 MPa.m1/2, respectively, at ambient temperature when Al addition was of 3.5 wt pct.

The Effect and Mechanism of Nano-Cu Lubricating Additives on the Electroless Deposited Ni-W-P Coating

The coating and deposition process with excellent anti wear and suitable for industrial application were developed, and the optimum bath composition and process were obtained by studying the influence of the bath composition, temperature and pH value on the deposition rate and the plating solution stability. Moreover, the tribological properties of nano-Cu lubricating additives and electroless deposited Ni-W-P coating as well as their synergistic effect are researched using ring-block abrasion testing machine and energy dispersive spectrometer. Research results show that Ni-W-P alloy coating and nano-Cu lubricating additive have excellent synergistic effect, e g, the wear resistance of Ni-W-P alloy coating （with heat treatment and the oil with nano-Cu additives） has increased hundreds times than 45 steel as the metal substrate with the basic oil, and zero wear is achieved, which breaks through the bottleneck of previous separate research of the above-mentioned two aspects.

Pressure State in Deep Crust and Formation Depth of UHP Metamorphic Rocks

This paper presents some questions to the formula of pressure=depth×specific gravity from the viewpoint that the hydrostatic pressure is equal to the gravity of overlying rocks and the rocks in a static fluid state, which is drawn from the research and analysis of the research field and the corresponding problems of the pressure state in the deep crust and the formation depth of the UHP metamorphic rocks. In this research, the underground rocks are considered as the solid possessing some rheological behaviors to discuss the polysource stress state and to obtain a more reasonable method for the calculation of depths using the model of the unbalanced force solid. It is suggested from this paper that the P/SW method for the calculation of the ultrahigh pressure stemming only from the gravity has obviously overstated the formation depth of the UHP metamorphism. The formation model emphasizing the effect of the gravity, the tectonic force and the metamorphic force of the facies change concludes that such UHP minerals as coesite may have been produced in the inner crust.

High plastic Zr–Cu–Fe–Al–Nb bulk metallic glasses for biomedical applications

Four Zr–Cu–Fe–Al-based bulk metallic glasses（BMGs） with Zr contents greater than 65at% and minor additions of Nb were designed and prepared. The glass forming abilities, thermal stabilities, mechanical properties, and corrosion resistance properties of the prepared BMGs were investigated. These BMGs exhibit moderate glass forming abilities along with superior fracture and yield strengths compared to previously reported Zr–Cu–Fe–Al BMGs. Specifically, the addition of Nb into this quaternary system remarkably increases the plastic strain to 27.5%, which is related to the high Poisson＇s ratio and low Young＇s and shear moduli. The Nb-bearing BMGs also exhibit a lower corrosion current density by about one order of magnitude and a wider passive region than 316 L steel in phosphate buffer solution（PBS, pH 7.4）. The combination of the optimized composition with high deformation ability, low Young＇s modulus, and excellent corrosion resistance properties indicates that this kind of BMG is promising for biomedical applications.

Quantum chemical study on the mechanism of the consecutive addition of HCN to aminoacetonitrile

MINDO/3 method has been used to study the mechanism of the consecutive addition of HCN to aminoacetonitrile.The results obtained for the first three steps show that the reaction is exothermic,and step I is the rate determining step.

Effect of Cu Addition in Pipeline Steels on Microstructure,Mechanical Properties and Microbiologically Influenced Corrosion

In the present study, Cu-modified pipeline steels were fabricated to mitigate MIC by the antimicrobial ability of Cu element. The microstructure, mechanical properties and the antimircobial performance of the Cu-modified steel were systematically investigated. The Cu-modified steels showed good antimicrobial performance with remarkable strength enhancement by nanoscale Cu-rich precipitates and good impact toughness without changing the original base microstructures after the optimal aging treatment of 500 °C/1 h.

Facile and one-pot,electro-organic synthesis of a new bis-quinone by the ECCE mechanism in green media

Electrochemical oxidation of 4-methyl catechol（1a） is investigated in the presence of 1,3-indandione（3）as nucleophile in phosphate buffer solution（0.2 mol/L,pH 6） mixed with ethanol as organic green solvent（50/50） using cyclic voltammetry and controlled-potential coulometry.The results indicated thatquinones derived from electro-oxidation of 1a,participated in a 1,4-Michael addition reaction with1,3-indandione（3） under ECCE mechanism.In this direction,a new bis-quinone was synthesized in high yield and good purity using a facile and convenient electrochemical pathway by carbon anode electrodes in an undivided cell.

Optimization of fused deposition modeling process parameters:a review of current research and future prospects

Fused deposition modeling （FDM） is one of the most popuIar additive manufacturing technologies for various engineering applications. FDM process has been introduced commercially in early 1990s by Stratasys Inc., USA. The quality of FDM processed parts mainly depends on careful selection of process variables. Thus, identifica- tion of the FDM process parameters that significantly affect the quality of FDM processed parts is important. In recent years, researchers have explored a number of ways to improve the mechanical properties and part quality using various experimental design techniques and concepts. This article aims to review the research carried out so far in determining and optimizing the process parameters of the FDM process. Several statistical designs of experiments and optimization techniques used for the determination of optimum process parameters have been examined. The trends for future FDM research in this area are described.