During the solid fluidization exploitation of marine natural gas hydrates,the hydrate particles and cuttings produced via excavation and crushing are transported by the drilling mud.The potential flow safety issues ar...During the solid fluidization exploitation of marine natural gas hydrates,the hydrate particles and cuttings produced via excavation and crushing are transported by the drilling mud.The potential flow safety issues arising during the transport process,such as the blockage of pipelines and equipment,have attracted considerable attention.This study aims to investigate the impact of hydrate adhesion features,including agglomeration,cohesion,and deposition,on the flow transport processes in solid fluidization exploitation and to provide a reference for the design and application of multiphase hydrate slurry transport in solid fluidization exploitation.We established a numerical simulation model that considers the hydrate adhesion properties using the coupled computational fluid dynamics and discrete element method(CFD-DEM)for the multiphase mixed transport in solid fluidization exploitation.An appropriate model to simulate the adhesion force of the hydrate particles and the corresponding parameter values were obtained.The conclusions obtained are as follows.Under the same operating conditions,a stationary bed is more likely to form in the transport process due to the hydrate adhesion forces;adhesion forces can increase the critical deposition velocity of the mixture of hydrate particles and cuttings.Hydrate adhesion lowers the height of the solid-phase moving bed,while the agglomeration and cohesion of particles can intensify the aggregation and deposition of hydrate debris and cuttings at the bottom of the pipe.These particles tend to form a deposit bed rather than a moving bed,which reduces the effective flow area of the pipeline and increases the risk of blockage.展开更多
Although sulfide electrode materials in lithium battery systems have been intensively investigated due to their low-cost, high theoretical specific capacity, and energy density, there are few studies fousing on the ad...Although sulfide electrode materials in lithium battery systems have been intensively investigated due to their low-cost, high theoretical specific capacity, and energy density, there are few studies fousing on the adhesion properties, including the physical origin of hetero-coordination resolved interface relaxation, binding energy and the energetic behavior, and even the accurate quantitative information. In this paper, we present an approach for quantifying the interface adhesion properties of sulfide electrode materials resolved by the combination of bond order-length-strength theory(BOLS) and X-ray photoelectron spectroscopy(XPS), which has enabled clarification of the interface adhesion nature. The results show that the Cu 2p, Fe 2p, and S 2p electrons of Cu S and FeS_(2) compounds shift negatively due to the charge polarization of the conduction electrons of the heteroatoms, while Mo 3d, Sn 3d electrons of Mo S2 and Sn S2 and the C 1 s and S 2p electrons of CS compound shift positively due to the quantum trapping. It is noted that the exact interface adhesion energies of Cu S is 3.42 J m^(-2), which is consistent with the calculation result. The approach can not only clarify the origin of the interface adhesion properties of sulfide electrode materials,but also derive their quantification information from atomistic sites.展开更多
Although some progress in plasma modification of the polytetrafluoroethylene(PTFE) surface has been made recently,its adhesion strength still needs to be further improved.In this work,the surface of a PTFE sample was ...Although some progress in plasma modification of the polytetrafluoroethylene(PTFE) surface has been made recently,its adhesion strength still needs to be further improved.In this work,the surface of a PTFE sample was treated with a two-step in-situ method.Firstly,the PTFE surface was treated with capacitively coupled Ar plasma to improve its mechanical interlocking performance;then,Ar+NH_(3)+CH_(4) plasma was used to deposit an a-CNx:H cross-linking layer on the PTFE surface to improve the molecular bonding ability.After treatment,a high specific surface area of 2.20 and a low F/C ratio of 0.32 were achieved on the PTFE surface.Its surface free energy was increased significantly and its maximum adhesion strength reached77.1 N·10 mm^(-1),which is 56% higher than that of the single-step Ar plasma-treated sample and32% higher than that of the single-step Ar+CH_(4)+NH_(3) plasma-treated sample.展开更多
A series of phenoxy resins was directly prepared through the polymerization of each of the various aromatic dihydric phenols and epichlorohydrin.FTIR and 1H NMR spectra were recorded to characterize the structures of ...A series of phenoxy resins was directly prepared through the polymerization of each of the various aromatic dihydric phenols and epichlorohydrin.FTIR and 1H NMR spectra were recorded to characterize the structures of the re-sins.The GPC curves were used to determine the molecular weight distribution.In addition,the thermal properties of the resins were studied with differential scanning calorimetry(DSC)and thermal gravimetric analysis(TGA).The thermal stabilities of the polymers increased with the content of the benzene ring,pendant group increasing or biphenyl groups emerging.The adhesive properties of the polymers were evaluated in terms of the lap shear strength with Fe-Fe adherends.The fracture mechanisms were determined by SEM observation and it was found that there was an important participation of cohesive fracture mechanisms.Also,it has been demonstrated that the extension of these micro-cohesive mechanisms is directly correlated with the adhesive strength.According to these results,the phenoxy resin containing biphenyl groups presented a higher adhesive strength and could improve the adhesive property of the epoxy/phenoxy system to a certain extent.展开更多
Finite element analyses and experiments are conducted to analyze the mechanical behavior of ASTM shear-loaded adhesive lap joints. Adhesive is characterized for the stress-strain relation by comparing the apparent she...Finite element analyses and experiments are conducted to analyze the mechanical behavior of ASTM shear-loaded adhesive lap joints. Adhesive is characterized for the stress-strain relation by comparing the apparent shear-strain relations obtained from finite element analysis and experiments following ASTM D 5656 Standard. With the established stress-strain relation, two failure criteria using equivalent plastic strain and J-integral are adopted to predict the failure loads for joint specimens following ASTM D 5656 and ASTM D 3165 Standard, respectively. Good correlation is found between the finite element results and the experimental results. The strength of ASTM D 3165 specimens with debonding defects is also studied. Calculation results shows that experiment data following the standards provide only relative material constants, such as apparent shear modulus and strengths. Further investigation is required to find out the engineering properties needed for actual joint design. For the specimens with debonding defects, the locations of defects have great effects on their load bearing ability.展开更多
An overview of the advances in studies on tribology of molecular deposition (MD) films is presented here to summarize the studies of nanofrictional properties, adhesion, wear and mechanical behavior, as well as the ...An overview of the advances in studies on tribology of molecular deposition (MD) films is presented here to summarize the studies of nanofrictional properties, adhesion, wear and mechanical behavior, as well as the molecular dynamics simulation of nanotribological properties of the film in the last decade. Some key research topics which need to be investigate further are addressed.展开更多
Modified chitosans with 3,4-di-hydroxy benzoyl groups (CS-DHBA) and 3,4,5-tri-hydroxy benzoyl groups (CS- THBA) were synthesized and their nanoparticles were prepared via ionic crosslinking by tripolyphosphate (...Modified chitosans with 3,4-di-hydroxy benzoyl groups (CS-DHBA) and 3,4,5-tri-hydroxy benzoyl groups (CS- THBA) were synthesized and their nanoparticles were prepared via ionic crosslinking by tripolyphosphate (TPP). The chemical structure and degree of substitution (DS) of di- and tri-hydroxy benzoyl chitosans are determined by FTIR and IH- NMR spectroscopy. The morphology of particles, size distribution and zeta potential of nanoparticles were studied using transmission electron microscopy (TEM) and dynamic light scattering (DLS), respectively. The mean diameters of particles of CS-DHBA and CS-THBA nanoparticles were 144 nm and 112 nm, respectively. It was found that the particles size decreased slightly with decreasing the degree of substitution and increasing degree of deacetylation (DD), due to increasing of ionic crosslinking of ammonium ions and polyanions of tripolyphosphate. The TEM photographs of CS-DHBA show that these particles are spherical in shape, but the particles of CS-THBA show some aggregation. In addition, the solubility and the mechanical properties of the prepared modified chitosans and their nanoparticles were evaluated for bio-adhesive and biomedical application. The results of solubility tests indicated that, the CS-DHBA and CS-THBA have higher solubility at pH 〉 7 comparing to CS. Also the CS-DHBA, CS-THBA and their nanoparticles showed a significant adhesive capacity and enhanced tensile strength and tensile modulus.展开更多
Because of their tissue-like mechanical performances,high biocompatibility,and adjust-able functionality,hydrogels have become increasingly attractive materials for promoting wound healing.Chronic wounds include burn,...Because of their tissue-like mechanical performances,high biocompatibility,and adjust-able functionality,hydrogels have become increasingly attractive materials for promoting wound healing.Chronic wounds include burn,diabetic,and infected wounds.Unlike common incision wounds,chronic wounds are more challenging to heal.To meet the clinical needs,multifunctional hydrogels should be fabricated and investigated.To guide future studies on the fabrication of hydrogel-based chronic wound dressings,a review of advanced multifunctional hydrogels is necessary.Various hydrogels with advanced properties,such as antibacterial,antioxidant,bioadhesive,anti-inflammatory,and wound healing properties,that can be used for skin burn wounds and diabetic wounds are summarised.Lastly,the prospects of advanced hydrogels for wound healing are elaborated.展开更多
Self-lubricating polymer composite coatings,with tailorable tribological and mechanical properties,have been widely employed on mechanical parts to reduce friction and wear,which saves energy and improves the overall ...Self-lubricating polymer composite coatings,with tailorable tribological and mechanical properties,have been widely employed on mechanical parts to reduce friction and wear,which saves energy and improves the overall performance for applications such as aerospace satellite parts,shafts,gears,and bushings.The addition of functional fillers can overcome the limitations of single-polymer coatings and extend the service life of the coatings by providing a combination of low friction,high wear resistance,high load bearing,high temperature resistance,and high adhesion.This paper compares the heat resistance,and the tribological and mechanical properties of common polymer matrices,as well as the categories of functional fillers that improve the coating performance.Applicable scopes,process parameters,advantages,and limitations of the preparation methods of polymer coatings are discussed in detail.The tribological properties of the composite coatings with different matrices and fillers are compared,and the lubrication mechanisms are analyzed.Fillers reduce friction by promoting the formation of transfer films or liquid shear films.Improvement of the mechanical properties of the composite coatings with fillers of different morphologies is described in terms of strengthening and toughening mechanisms,including a stress transfer mechanism,shear yielding,crack bridging,and interfacial debonding.The test and enhancement methods for the adhesion properties between the coating and substrate are discussed.The coating adhesion can be enhanced through mechanical treatment,chemical treatment,and energy treatment of the substrate.Finally,we propose the design strategies for high-performance polymer composite coating systems adapted to specific operating conditions,and the limitations of current polymer composite coating research are identified.展开更多
Tens of billion metric tons of anthropogenic CO_2 discharged from the burning of fossil fuels lead to an enormous environmental and resource burden. It is charming to transform CO_2 to desirable, economical chemicals ...Tens of billion metric tons of anthropogenic CO_2 discharged from the burning of fossil fuels lead to an enormous environmental and resource burden. It is charming to transform CO_2 to desirable, economical chemicals and materials. Poly(propylene carbonate)(PPC) is an emerging CO_2-based material. Herein, we report the design, synthesis and characterization of the reactive hot melt polyurethane adhesive(RHMPA) based on PPC polyol. The resultant RHMPAs exhibit good adhesion properties to multiple substrates including plastics(PC, PMMA, ABS) and metals(aluminium, steel), which is comparable to or even better than conventional RHMPAs prepared from petro-based polyol. Furthermore, the PPC-based RHMPAs have tunable mechanical properties, and are thermally stable in the typical working range of bonding process(up to 270 °C). The study is expected to expand the applications of PPC and provide a new type of CO_2-based renewable and eco-friendly materials.展开更多
Coal tar,a by-product from the destructive distillation of coal in coking oven,is widely used in road engineering for its excellent adhesion and fuel resistance properties,especially for pavement surface treatments in...Coal tar,a by-product from the destructive distillation of coal in coking oven,is widely used in road engineering for its excellent adhesion and fuel resistance properties,especially for pavement surface treatments in gas stations and airports. However,coal tar has a high Polycyclic Aromatic Hydrocarbons (or PAHs) content,which makes it toxic. In 1985,the International Agency for Research on Cancer (IARC) has proved that coal tar is carcinogenic to humans. Research showed that Coal Tar-based Sealers (CTS) contribute to the majority of PAHs pollution in the water environment.Because of this environmental concern,CTS are not allowed in many developed countries in the USA and Europe. In contrast,coal tar is still used for road engineering in China and is even used increasingly.This paper gives a literature review on the general information and research about environmental concern of using coal tar in road engineering. Based on the review,some possible alternatives to replace coal tar are described. These alternatives include nano-clay/epoxy modified bitumen/bitumen emulsion and waterborne polyurethane/epoxy resin,which are environmental friendly. They have the potential to perform as well as CTS,and even better in some special applications.展开更多
基金supported by the National Natural Science Foundation of China under the projects“Characteristics of argillaceous-silt natural gas hydrate reservoirs in the South China Sea and the gas-liquid-solid multiphase heat and mass transfer mechanisms”(U19B2005)“Study on the decomposition mechanism and transportation rules of natural has hydrate slurry in the solid fluidization exploitation of combustible ice”(51874323).
文摘During the solid fluidization exploitation of marine natural gas hydrates,the hydrate particles and cuttings produced via excavation and crushing are transported by the drilling mud.The potential flow safety issues arising during the transport process,such as the blockage of pipelines and equipment,have attracted considerable attention.This study aims to investigate the impact of hydrate adhesion features,including agglomeration,cohesion,and deposition,on the flow transport processes in solid fluidization exploitation and to provide a reference for the design and application of multiphase hydrate slurry transport in solid fluidization exploitation.We established a numerical simulation model that considers the hydrate adhesion properties using the coupled computational fluid dynamics and discrete element method(CFD-DEM)for the multiphase mixed transport in solid fluidization exploitation.An appropriate model to simulate the adhesion force of the hydrate particles and the corresponding parameter values were obtained.The conclusions obtained are as follows.Under the same operating conditions,a stationary bed is more likely to form in the transport process due to the hydrate adhesion forces;adhesion forces can increase the critical deposition velocity of the mixture of hydrate particles and cuttings.Hydrate adhesion lowers the height of the solid-phase moving bed,while the agglomeration and cohesion of particles can intensify the aggregation and deposition of hydrate debris and cuttings at the bottom of the pipe.These particles tend to form a deposit bed rather than a moving bed,which reduces the effective flow area of the pipeline and increases the risk of blockage.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11972157 and 11872054)the Natural Science Foundation of Hunan Province (Grant Nos. 2020JJ2026 and 2021JJ30643)。
文摘Although sulfide electrode materials in lithium battery systems have been intensively investigated due to their low-cost, high theoretical specific capacity, and energy density, there are few studies fousing on the adhesion properties, including the physical origin of hetero-coordination resolved interface relaxation, binding energy and the energetic behavior, and even the accurate quantitative information. In this paper, we present an approach for quantifying the interface adhesion properties of sulfide electrode materials resolved by the combination of bond order-length-strength theory(BOLS) and X-ray photoelectron spectroscopy(XPS), which has enabled clarification of the interface adhesion nature. The results show that the Cu 2p, Fe 2p, and S 2p electrons of Cu S and FeS_(2) compounds shift negatively due to the charge polarization of the conduction electrons of the heteroatoms, while Mo 3d, Sn 3d electrons of Mo S2 and Sn S2 and the C 1 s and S 2p electrons of CS compound shift positively due to the quantum trapping. It is noted that the exact interface adhesion energies of Cu S is 3.42 J m^(-2), which is consistent with the calculation result. The approach can not only clarify the origin of the interface adhesion properties of sulfide electrode materials,but also derive their quantification information from atomistic sites.
文摘Although some progress in plasma modification of the polytetrafluoroethylene(PTFE) surface has been made recently,its adhesion strength still needs to be further improved.In this work,the surface of a PTFE sample was treated with a two-step in-situ method.Firstly,the PTFE surface was treated with capacitively coupled Ar plasma to improve its mechanical interlocking performance;then,Ar+NH_(3)+CH_(4) plasma was used to deposit an a-CNx:H cross-linking layer on the PTFE surface to improve the molecular bonding ability.After treatment,a high specific surface area of 2.20 and a low F/C ratio of 0.32 were achieved on the PTFE surface.Its surface free energy was increased significantly and its maximum adhesion strength reached77.1 N·10 mm^(-1),which is 56% higher than that of the single-step Ar plasma-treated sample and32% higher than that of the single-step Ar+CH_(4)+NH_(3) plasma-treated sample.
文摘A series of phenoxy resins was directly prepared through the polymerization of each of the various aromatic dihydric phenols and epichlorohydrin.FTIR and 1H NMR spectra were recorded to characterize the structures of the re-sins.The GPC curves were used to determine the molecular weight distribution.In addition,the thermal properties of the resins were studied with differential scanning calorimetry(DSC)and thermal gravimetric analysis(TGA).The thermal stabilities of the polymers increased with the content of the benzene ring,pendant group increasing or biphenyl groups emerging.The adhesive properties of the polymers were evaluated in terms of the lap shear strength with Fe-Fe adherends.The fracture mechanisms were determined by SEM observation and it was found that there was an important participation of cohesive fracture mechanisms.Also,it has been demonstrated that the extension of these micro-cohesive mechanisms is directly correlated with the adhesive strength.According to these results,the phenoxy resin containing biphenyl groups presented a higher adhesive strength and could improve the adhesive property of the epoxy/phenoxy system to a certain extent.
文摘Finite element analyses and experiments are conducted to analyze the mechanical behavior of ASTM shear-loaded adhesive lap joints. Adhesive is characterized for the stress-strain relation by comparing the apparent shear-strain relations obtained from finite element analysis and experiments following ASTM D 5656 Standard. With the established stress-strain relation, two failure criteria using equivalent plastic strain and J-integral are adopted to predict the failure loads for joint specimens following ASTM D 5656 and ASTM D 3165 Standard, respectively. Good correlation is found between the finite element results and the experimental results. The strength of ASTM D 3165 specimens with debonding defects is also studied. Calculation results shows that experiment data following the standards provide only relative material constants, such as apparent shear modulus and strengths. Further investigation is required to find out the engineering properties needed for actual joint design. For the specimens with debonding defects, the locations of defects have great effects on their load bearing ability.
基金the National Natural Science Foundation of China(Grant No.50575171)the National Basic Research Program of China(Grant No.2007CB607604)the Open Financial Fund of the State Key Laboratory of Tribology of Tsinghua University(Grant No.SKLT05-02).
文摘An overview of the advances in studies on tribology of molecular deposition (MD) films is presented here to summarize the studies of nanofrictional properties, adhesion, wear and mechanical behavior, as well as the molecular dynamics simulation of nanotribological properties of the film in the last decade. Some key research topics which need to be investigate further are addressed.
文摘Modified chitosans with 3,4-di-hydroxy benzoyl groups (CS-DHBA) and 3,4,5-tri-hydroxy benzoyl groups (CS- THBA) were synthesized and their nanoparticles were prepared via ionic crosslinking by tripolyphosphate (TPP). The chemical structure and degree of substitution (DS) of di- and tri-hydroxy benzoyl chitosans are determined by FTIR and IH- NMR spectroscopy. The morphology of particles, size distribution and zeta potential of nanoparticles were studied using transmission electron microscopy (TEM) and dynamic light scattering (DLS), respectively. The mean diameters of particles of CS-DHBA and CS-THBA nanoparticles were 144 nm and 112 nm, respectively. It was found that the particles size decreased slightly with decreasing the degree of substitution and increasing degree of deacetylation (DD), due to increasing of ionic crosslinking of ammonium ions and polyanions of tripolyphosphate. The TEM photographs of CS-DHBA show that these particles are spherical in shape, but the particles of CS-THBA show some aggregation. In addition, the solubility and the mechanical properties of the prepared modified chitosans and their nanoparticles were evaluated for bio-adhesive and biomedical application. The results of solubility tests indicated that, the CS-DHBA and CS-THBA have higher solubility at pH 〉 7 comparing to CS. Also the CS-DHBA, CS-THBA and their nanoparticles showed a significant adhesive capacity and enhanced tensile strength and tensile modulus.
基金Sichuan Science and Technology Program,Grant/Award Number:2022YFS0040Guangdong Basic and Applied Basic Research Foundation,Grant/Award Number:2021B1515120019+3 种基金Fundamental Research Funds for Central Universities,Grant/Award Numbers:2682020ZT79,202241010Shenzhen Funds of the Central Government to Guide Local Scientific and Technological Development,Grant/Award Number:2021SZVUP123Excellent Young Scientist Foundation of Shandong Province,Grant/Award Number:ZR202110120029NSFC,Grant/Award Number:82072071。
文摘Because of their tissue-like mechanical performances,high biocompatibility,and adjust-able functionality,hydrogels have become increasingly attractive materials for promoting wound healing.Chronic wounds include burn,diabetic,and infected wounds.Unlike common incision wounds,chronic wounds are more challenging to heal.To meet the clinical needs,multifunctional hydrogels should be fabricated and investigated.To guide future studies on the fabrication of hydrogel-based chronic wound dressings,a review of advanced multifunctional hydrogels is necessary.Various hydrogels with advanced properties,such as antibacterial,antioxidant,bioadhesive,anti-inflammatory,and wound healing properties,that can be used for skin burn wounds and diabetic wounds are summarised.Lastly,the prospects of advanced hydrogels for wound healing are elaborated.
基金This work was supported by National Natural Science Foundation of China(Grant No.51822505)Beijing Natural Science Foundation of China(Grant No.3182010)+1 种基金Major Scientific Research and Development Project in Jiangxi(Grant No.20173ABC28008)the National Key Research and Development Program of China(Grant No.2018YFB2000202).
文摘Self-lubricating polymer composite coatings,with tailorable tribological and mechanical properties,have been widely employed on mechanical parts to reduce friction and wear,which saves energy and improves the overall performance for applications such as aerospace satellite parts,shafts,gears,and bushings.The addition of functional fillers can overcome the limitations of single-polymer coatings and extend the service life of the coatings by providing a combination of low friction,high wear resistance,high load bearing,high temperature resistance,and high adhesion.This paper compares the heat resistance,and the tribological and mechanical properties of common polymer matrices,as well as the categories of functional fillers that improve the coating performance.Applicable scopes,process parameters,advantages,and limitations of the preparation methods of polymer coatings are discussed in detail.The tribological properties of the composite coatings with different matrices and fillers are compared,and the lubrication mechanisms are analyzed.Fillers reduce friction by promoting the formation of transfer films or liquid shear films.Improvement of the mechanical properties of the composite coatings with fillers of different morphologies is described in terms of strengthening and toughening mechanisms,including a stress transfer mechanism,shear yielding,crack bridging,and interfacial debonding.The test and enhancement methods for the adhesion properties between the coating and substrate are discussed.The coating adhesion can be enhanced through mechanical treatment,chemical treatment,and energy treatment of the substrate.Finally,we propose the design strategies for high-performance polymer composite coating systems adapted to specific operating conditions,and the limitations of current polymer composite coating research are identified.
基金financially supported by the National Natural Science Foundation of China(Nos.21574019 and 21304015)the Fundamental Research Funds for the Central Universities and the DHU Distinguished Young Professor Program(No.B201303)
文摘Tens of billion metric tons of anthropogenic CO_2 discharged from the burning of fossil fuels lead to an enormous environmental and resource burden. It is charming to transform CO_2 to desirable, economical chemicals and materials. Poly(propylene carbonate)(PPC) is an emerging CO_2-based material. Herein, we report the design, synthesis and characterization of the reactive hot melt polyurethane adhesive(RHMPA) based on PPC polyol. The resultant RHMPAs exhibit good adhesion properties to multiple substrates including plastics(PC, PMMA, ABS) and metals(aluminium, steel), which is comparable to or even better than conventional RHMPAs prepared from petro-based polyol. Furthermore, the PPC-based RHMPAs have tunable mechanical properties, and are thermally stable in the typical working range of bonding process(up to 270 °C). The study is expected to expand the applications of PPC and provide a new type of CO_2-based renewable and eco-friendly materials.
文摘Coal tar,a by-product from the destructive distillation of coal in coking oven,is widely used in road engineering for its excellent adhesion and fuel resistance properties,especially for pavement surface treatments in gas stations and airports. However,coal tar has a high Polycyclic Aromatic Hydrocarbons (or PAHs) content,which makes it toxic. In 1985,the International Agency for Research on Cancer (IARC) has proved that coal tar is carcinogenic to humans. Research showed that Coal Tar-based Sealers (CTS) contribute to the majority of PAHs pollution in the water environment.Because of this environmental concern,CTS are not allowed in many developed countries in the USA and Europe. In contrast,coal tar is still used for road engineering in China and is even used increasingly.This paper gives a literature review on the general information and research about environmental concern of using coal tar in road engineering. Based on the review,some possible alternatives to replace coal tar are described. These alternatives include nano-clay/epoxy modified bitumen/bitumen emulsion and waterborne polyurethane/epoxy resin,which are environmental friendly. They have the potential to perform as well as CTS,and even better in some special applications.