A differential/integral method to estimate the kinetic parameters(apparent activation energy Eaand pre-exponential factor A) for thermal decomposition reaction of energetic materials based on Kooij formula are applied...A differential/integral method to estimate the kinetic parameters(apparent activation energy Eaand pre-exponential factor A) for thermal decomposition reaction of energetic materials based on Kooij formula are applied to study the nonisothermal decomposition reaction kinetics of hexanitrohexaazaisowurtzitane(HNIW) by analyzing nonisothermal DSC curve data. The apparent activation energy(Ea) obtained by the integral isoconversional non-isothermal method based on Kooij formula is used to check the constancy and validity of apparent activation energy by the differential/integral method based on Kooij formula. The most probable mechanism function of thermal decomposition reaction of HNIW is determined by a logical choice method. The equations for calculating the critical temperatures of thermal explosion(Tb) and adiabatic time-toexplosion(tTIad) based on Kooij formula are used to calculate the values of Tband tTIadto evaluate the thermal safety and heat-resistant ability of HNIW. All the original data needed for analyzing the kinetic parameters are from nonisothermal DSC curves. The results show that the kinetic model function in differential form and the values of Eaand A of decomposition reaction of HNIW are 3(1 a)[ ln(1 a)]2/3, 152.73 kJ mol 1and 1011.97s 1, respectively, and the values of self-accelerating decomposition temperature(TSADT), Tband tTIadare 486.55 K, 493.11 K and52.01 s, respectively.展开更多
A new compound, [（NH2）2C=NH2]＋N（NO2）2-（GDN）, was prepared by mixing ammonium dinitramide （ADN） and guanidine hydrochloride in water. The thermal behavior of GDN was studied under the non-isothermal conditions...A new compound, [（NH2）2C=NH2]＋N（NO2）2-（GDN）, was prepared by mixing ammonium dinitramide （ADN） and guanidine hydrochloride in water. The thermal behavior of GDN was studied under the non-isothermal conditions with DSC and TG/DTG methods. The apparent activation energy（E） and pre-exponential constant（A） of the exothermic decomposition stage of GDN were 118.75 kJ/mol and 10^10.86 s^-1, respectively. The critical temperature of the thermal explosion（Tb） of GDN was 164.09 ℃. The specific heat capacity of GDN was determined with the Micro-DSC method and the theoretical calculation method, and the standard molar specific heat capacity was 234.76 J·mol^-1·K^-1 at 298.15 K. The adiabatic time-to-explosion of GDN was also calculated to be a certain value between 404.80 and 454.95 s.展开更多
Energy deposition at the interface of explosive welding is analyzed by symmetrical impaction model of uneompressible liquid. Equation of energy in the flow field of explosive welding is deduced and the distribution of...Energy deposition at the interface of explosive welding is analyzed by symmetrical impaction model of uneompressible liquid. Equation of energy in the flow field of explosive welding is deduced and the distribution of temperature in the flow field is solved by finite difference method on the basis that the adiabatic compression is considered. The results show that the temperature rise increases with the increasing of the velocity of approaching flow and impact angle, under appropriate velocity of approaching flow and impact angle the temperature rise near the welding interface will be higher than the melting point of the material and the thin melted layer is localized on the region near welding interface.展开更多
The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries.Investigating the combustion and explosion hazards of lithium-ion ba...The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries.Investigating the combustion and explosion hazards of lithium-ion batteries vent gas can provide guidance for rescue and protection in explosion accidents in energy storage stations and new energy vehicles,thereby promoting the application and development of lithium-ion batteries.Based on this understanding and combined with previous research on gas production from lithium-ion batteries,this article conducted a study on the combustion and explosion risks of vent gas from thermal runaway of 18650 LFP batteries with different states of charge(SOCs).The explosion limit of mixed gases affected by carbon dioxide inert gas is calculated through the“elimination”method,and the Chemkin-Pro software is used to numerically simulate the laminar flame speed and adiabatic flame temperature of the battery vent gas.And the concentration of free radicals and sensitivity coefficients of major elementary reactions in the system are analyzed to comprehensively evaluate the combustion explosion hazard of battery vent gas.The study found that the 100%SOC battery has the lowest explosion limit of the vent gas.The inhibitory elementary reaction sensitivity coefficient in the reaction system is lower and the concentration of free radicals is higher.Therefore,it has the maximum laminar flame speed and adiabatic flame temperature.The combustion and explosion hazard of battery vent gas increases with the increase of SOC,and the risk of explosion is the greatest and most harmful when SOC reaches 100%.However,the related hazards decrease to varying degrees with overcharging of the battery.This article provides a feasible method for analyzing the combustion mechanism of vent gas from lithium-ion batteries,revealing the impact of SOC on the hazardousness of battery vent gas.It provides references for the safety of storage and transportation of lithium-ion batteries,safety protection of energy storage stations,and the selection of related fire extinguishing agents.展开更多
Effect of annealing on "fly-line"(adiabatic sheer line) microstructure and properties of explosively composited stainless steel-stainless steel plates was studied.Results show that the flyline microstructure...Effect of annealing on "fly-line"(adiabatic sheer line) microstructure and properties of explosively composited stainless steel-stainless steel plates was studied.Results show that the flyline microstructure will diminish through certain annealing process,while the cracks formed from fly-line microstructure will remain.Therefore,fly-line microstructure can be considered as a plastic deformation microstructure and crack source s meanwhile its formation is considered as a special plastic deformation mechanism of metal under explosive load.展开更多
The explosivity experiment of anti-explosive ammonium nitrate (AEAN) shows that the explosive characteristic of AEAN is eliminated. The adiabatic decompositions of ammonium nitrate and AEAN were investigated with an a...The explosivity experiment of anti-explosive ammonium nitrate (AEAN) shows that the explosive characteristic of AEAN is eliminated. The adiabatic decompositions of ammonium nitrate and AEAN were investigated with an accelerating rate calorimeter (ARC). The curves of thermal decomposition temperature and pressure versus time, self-heating rate and pressure versus temperature for two systems were obtained. The kinetic parameters such as apparent activation energy and pre-exponential factor were calculated. The safety of AEAN was analyzed. It was indicated that AEAN has a higher thermal stability than AN. At the same time, it can be shown that the elimination of its explosive characteristic is due to the improvement on the thermal stability of AEAN.展开更多
文摘A differential/integral method to estimate the kinetic parameters(apparent activation energy Eaand pre-exponential factor A) for thermal decomposition reaction of energetic materials based on Kooij formula are applied to study the nonisothermal decomposition reaction kinetics of hexanitrohexaazaisowurtzitane(HNIW) by analyzing nonisothermal DSC curve data. The apparent activation energy(Ea) obtained by the integral isoconversional non-isothermal method based on Kooij formula is used to check the constancy and validity of apparent activation energy by the differential/integral method based on Kooij formula. The most probable mechanism function of thermal decomposition reaction of HNIW is determined by a logical choice method. The equations for calculating the critical temperatures of thermal explosion(Tb) and adiabatic time-toexplosion(tTIad) based on Kooij formula are used to calculate the values of Tband tTIadto evaluate the thermal safety and heat-resistant ability of HNIW. All the original data needed for analyzing the kinetic parameters are from nonisothermal DSC curves. The results show that the kinetic model function in differential form and the values of Eaand A of decomposition reaction of HNIW are 3(1 a)[ ln(1 a)]2/3, 152.73 kJ mol 1and 1011.97s 1, respectively, and the values of self-accelerating decomposition temperature(TSADT), Tband tTIadare 486.55 K, 493.11 K and52.01 s, respectively.
基金Supported by the National Natural Science Foundation of China(No.20803058)Xi’an Scientific and Technical Plan Foundation, China(No.YF07106).
文摘A new compound, [（NH2）2C=NH2]＋N（NO2）2-（GDN）, was prepared by mixing ammonium dinitramide （ADN） and guanidine hydrochloride in water. The thermal behavior of GDN was studied under the non-isothermal conditions with DSC and TG/DTG methods. The apparent activation energy（E） and pre-exponential constant（A） of the exothermic decomposition stage of GDN were 118.75 kJ/mol and 10^10.86 s^-1, respectively. The critical temperature of the thermal explosion（Tb） of GDN was 164.09 ℃. The specific heat capacity of GDN was determined with the Micro-DSC method and the theoretical calculation method, and the standard molar specific heat capacity was 234.76 J·mol^-1·K^-1 at 298.15 K. The adiabatic time-to-explosion of GDN was also calculated to be a certain value between 404.80 and 454.95 s.
基金Support of this research is provided by National Natural Science Foundation of China (No.10172025).
文摘Energy deposition at the interface of explosive welding is analyzed by symmetrical impaction model of uneompressible liquid. Equation of energy in the flow field of explosive welding is deduced and the distribution of temperature in the flow field is solved by finite difference method on the basis that the adiabatic compression is considered. The results show that the temperature rise increases with the increasing of the velocity of approaching flow and impact angle, under appropriate velocity of approaching flow and impact angle the temperature rise near the welding interface will be higher than the melting point of the material and the thin melted layer is localized on the region near welding interface.
基金supported by the National Natural Science Foundation of China(52106284)the Natural Science Foundation of Hebei Province(B2021507001)support of Project to Promote Innovation in Doctoral Research at CPPU(BSKY202302).
文摘The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries.Investigating the combustion and explosion hazards of lithium-ion batteries vent gas can provide guidance for rescue and protection in explosion accidents in energy storage stations and new energy vehicles,thereby promoting the application and development of lithium-ion batteries.Based on this understanding and combined with previous research on gas production from lithium-ion batteries,this article conducted a study on the combustion and explosion risks of vent gas from thermal runaway of 18650 LFP batteries with different states of charge(SOCs).The explosion limit of mixed gases affected by carbon dioxide inert gas is calculated through the“elimination”method,and the Chemkin-Pro software is used to numerically simulate the laminar flame speed and adiabatic flame temperature of the battery vent gas.And the concentration of free radicals and sensitivity coefficients of major elementary reactions in the system are analyzed to comprehensively evaluate the combustion explosion hazard of battery vent gas.The study found that the 100%SOC battery has the lowest explosion limit of the vent gas.The inhibitory elementary reaction sensitivity coefficient in the reaction system is lower and the concentration of free radicals is higher.Therefore,it has the maximum laminar flame speed and adiabatic flame temperature.The combustion and explosion hazard of battery vent gas increases with the increase of SOC,and the risk of explosion is the greatest and most harmful when SOC reaches 100%.However,the related hazards decrease to varying degrees with overcharging of the battery.This article provides a feasible method for analyzing the combustion mechanism of vent gas from lithium-ion batteries,revealing the impact of SOC on the hazardousness of battery vent gas.It provides references for the safety of storage and transportation of lithium-ion batteries,safety protection of energy storage stations,and the selection of related fire extinguishing agents.
文摘Effect of annealing on "fly-line"(adiabatic sheer line) microstructure and properties of explosively composited stainless steel-stainless steel plates was studied.Results show that the flyline microstructure will diminish through certain annealing process,while the cracks formed from fly-line microstructure will remain.Therefore,fly-line microstructure can be considered as a plastic deformation microstructure and crack source s meanwhile its formation is considered as a special plastic deformation mechanism of metal under explosive load.
文摘The explosivity experiment of anti-explosive ammonium nitrate (AEAN) shows that the explosive characteristic of AEAN is eliminated. The adiabatic decompositions of ammonium nitrate and AEAN were investigated with an accelerating rate calorimeter (ARC). The curves of thermal decomposition temperature and pressure versus time, self-heating rate and pressure versus temperature for two systems were obtained. The kinetic parameters such as apparent activation energy and pre-exponential factor were calculated. The safety of AEAN was analyzed. It was indicated that AEAN has a higher thermal stability than AN. At the same time, it can be shown that the elimination of its explosive characteristic is due to the improvement on the thermal stability of AEAN.
