Enhanced Crystallization of Poly(butylene adipate-co-terephthalate)by a Self-assembly Nucleating Agent

Poly(butylene adipate-co-terephthalate)(PBAT)is a promising biodegradable flexible polymer but suffers from slow crystallization rate,making it less attractive for some applications like the injection-molded products in comparison with low-density polyethylene(LDPE).This work aimed to accelerate the crystallization of PBAT by adding a self-assembly nucleating agent octamethylenedicarboxylic dibenzoylhydrazide(OMBH).PBAT/OMBH composites with various OMBH contents(0 wt%,0.5 wt%,0.7 wt%,1 wt%,2 wt%,3 wt%and 5 wt%)were prepared through melt-mixing.The effect of OMBH on the crystallization behavior,morphologies and mechanical properties of PBAT was investigated.The highest nucleation efficiency value of 59.6%was achieved for PBAT with 0.7 wt%OMBH,much higher than that of 22.7%for PBAT with 0.7 wt%talc.Atomic force microscopy results showed that OMBH formed fine fibers and induced the formation of transcrystalline layers of PBAT.Fourier transform infrared spectroscopy(FTIR)combined with two-dimensional correlation spectra suggested that the intermolecular dipole-dipole N—H…O=C interactions but not hydrogen bond between OMBH and PBAT promoted the crystallization of PBAT in the initial period of crystallization.The presence of OMBH did not change the crystal form of PBAT but had positive contribution in enhancing its crystallinity and mechanical properties.This work is essential for preparing PBAT with high crystallization rate,enhancing its potential applications in injection-molded products.

Biodegradable Poly(butylene adipate-co-terephthalate)/Poly(glycolic acid) Films: Effect of Poly(glycolic acid) Crystal on Mechanical and Barrier Properties

Binary biodegradable polymers films, poly(butylene adipate-co-terephthalate)(PBAT) and poly(glycolic acid)(PGA), were prepared through batch melt mixing to obtain Film Ⅰ and Film Ⅱ under two different processing conditions. PGA crystals played a major role in enhancing the mechanical and barrier properties of the films. For Film Ⅰ, there were initial PGA crystals before the film blowing process, the PGA molecular chain further crystallized, forming the oriented crystallization of PGA. Moreover, the Xcand crystalline size in Film Ⅰ were higher than those in Film Ⅱ. Compared with the different processing methods, Film Ⅰ has excellent mechanical and oxygen barrier properties due to the crystallization and orientation. The tensile strength reached 45.0 MPa, and tear strength exceeded 138.2 kN/m, while the elongation at break was as high as 750% for PBAT/PGA 85/15 in Film Ⅰ. The WVTR, WVP coefficients, and OP coefficients of PBAT/PGA films were decreased obviously with increasing the PGA content both in Film Ⅰ and Film Ⅱ. Moreover, the barrier properties of oxygen in Film Ⅰ were better than that in Film Ⅱ. This work reveals a feasible processing technique by introducing of initial crystallization of PGA to blow PBAT/PGA films with excellent mechanical and barrier properties.

Recyclable thermally conductive poly(butylene adipate-co-terephthalate)composites prepared via forced infiltration

With the rapid development of electronic equipment and communication technology,the demand for polymer composites with high thermal conductivity and mechanical properties has increased significantly.However,its nondegradable polymer matrix will inevitably bring more and more serious environmental pollution.Therefore,it is urgent to develop biodegradable thermally conductive polymer composites.In this work,biodegradable poly(butylene adipate-coterephthalate)(PBAT)is used as the matrix material,and vacuum-assisted filtration technology is employed to prepare carbon nanotube(CNT)and cellulose nanocrystal(CNC)networks with high thermal conductivity.Then CNT-CNC/PBAT composites with high thermal conductivity and excellent mechanical properties are prepared by the ultrasonic-assisted forced infiltration method.Both experiment and simulation methods are used to systematically investigate the thermally conductive and dissipation performances of the CNT-CNC/PBAT composites.Above all,a simple alcoholysis reaction is applied to realize the separation of the PBAT matrix and functional fillers without destroying the conductive network skeleton,which makes it possible for the recycling of thermally conductive polymer composites.

Biodegradable Foaming Material of Poly(butylene adipate-co-terephthalate)(PBAT)/Poly(propylene carbonate)(PPC)

A biodegradable blend foaming material of poly(butylene adipate-co-terephthalate)(PBAT)/poly(propylene carbonate)(PPC)was successfully prepared by chemical foaming agent and screw extrusion method.First,PBAT was modified by bis(tert-butyl dioxy isopropyl)benzene(BIBP)for chain extension,and then the extended PBAT(E-PBAT)was foamed with PPC using a twin(single)screw extruder.By analyzing the properties of the blends,we found that Young’s modulus increased from 58.8 MPa of E-PBAT to 244.7 MPa of E-PBAT/PPC 50/50.The viscosity of the polymer has a critical influence on the formation of cells.Compared with neat PBAT(N-PBAT),the viscosity of E-PBAT increased by 3396 Pa·s and E-PBAT/PPC 50/50 increased by 8836 Pa·s.Meanwhile,the dynamic mechanical analysis(DMA)results showed that the storage modulus(E’)at room temperature increased from 538 MPa to 1650 MPa.The various phase morphologies(“sea-island”,“quasi-co-continuous”and“cocontinuous”)and crystallinity of the blends affected the spread velocity of gas and further affected the foaming morphology in E-PBAT/PPC foam.Therefore,through the analysis of phase morphology and foaming mechanism,we concluded that the E-PBAT/PPC 70/30 component has both excellent strength and the best foaming performance.

Degradation of poly(butylene adipate-co-terephthalate) by Stenotrophomonas sp. YCJ1 isolated from farmland soil

In recent years, poly(butylene adipate-co-terephthalate)(PBAT) has been widely used. However, PBAT-degrading bacteria have rarely been reported. PBAT-degrading bacteria were isolated from farmland soil and identified. The effects of growth factors on the degradation of PBAT and the lipase activity of PBAT-degrading bacteria were assessed. The degradation mechanism was analyzed using scanning electron microscopy, attenuated total reflection Fourier transform infrared spectroscopy, proton nuclear magnetic resonance, Xray diffraction, and liquid chromatography-mass spectrometry. The results showed that Stenotrophomonas sp. YCJ1 had a significant degrading effect on PBAT. Under certain conditions, the strain could secrete 10.53 U/m L of lipase activity and degrade 10.14 wt.% of PBAT films. The strain secreted lipase to catalyze the degradation of the ester bonds in PBAT, resulting in the production of degradation products such as terephthalic acid, 1,4-butanediol, and adipic acid. Furthermore, the degradation products could participate in the metabolism of YCJ1 as carbon sources to facilitate complete degradation of PBAT, indicating that the strain has potential value for the bioremediation of PBAT in the environment.

Addition of Thermoplastic Starch(TPS)to Binary Blends of Poly(lactic acid)(PLA)with Poly(butylene adipate-co-terephthalate)(PBAT):Extrusion Compounding,Cast Extrusion and Thermoforming of Home Compostable Materials

Development of home compostable materials based on bioavailable polymers is of high strategic interest as they ensure a significant reduction of the environmental footprint in many production sectors.In this work,the addition of thermoplastic starch to binary PLA/PBAT blends was studied.The compounds were obtained by a reactive extrusion process by means of a co-rotating twin screw extruder.Thermomechanical,physical and chemical characterization tests were carried out to highlight the effectiveness of the material design strategy.The compounds were subsequently reprocessed by cast extrusion and thermoforming in order to obtain products suitable for the storage of hot food.The extruded films and the thermoformed containers were further characterized to highlight their thermo-mechanical,physical and chemical properties.Thermo-rheological,mechanical and physical properties of the material and of the cast film were analyzed thoroughly using combined technique as capillary rheometer,MFI,DSC,VICAT/HDT,XRD,FTIR,UV-Vis,SEM,permeability and,lastly,running preliminary chemical inertness and biodegradation tests.Particular attention was also devoted to the evaluation of the thermo-mechanical resistance of the thermoformed containers,where the PLA/PBAT/TPS blends proved to be very effective,also presenting a high disintegration rate in ambient conditions.

Effect of Mixing Strategy on the Structure-Properties of the PLA/PBAT Blends Incorporated with CNC

Polylactide(PLA)/poly(butylene adipate-co-terephthalate)(PBAT)blend nanocomposites including 3 wt%of cel-lulose nanocrystals(CNCs)were prepared by melt compounding method in a twin-screw extruder and an inter-nal mixer.Blend nanocomposites were formulated by diluting three different masterbatches prepared by solution casting method that contained 7 wt%of CNC.These masterbatches were:(m1)PLA/PBAT/CNC masterbatch;(m2)PLA/CNC masterbatch;and(m3)PBAT/CNC masterbatch.These were to explore how different prepara-tion methods affect the dispersion and localization of CNC and hence the properties of PLA/PBAT/CNC blend nanocomposites.Scanning electron microscopy(SEM)was used to study the structural changes of the blends.Rheological properties of PLA/PBAT blends and PLA/PBAT/CNC blend nanocomposites were also investigated.In the samples prepared by internal mixer,the rheological behavior of blend nanocomposite prepared through premixing of CNC particles with PLA showed a transition from liquid-like to a gel-like behavior.According to the rheological results and differential scanning calorimetry(DSC)analysis,it was found that the CNC overall enhanced the viscoelastic properties of blends and improved the PLA crystallization,respectively.Dynamic mechanical analysis(DMA)illustrated that the incorporation of CNC also enhanced the elastic modulus of PLA/PBAT blends specifically above the glass transition temperature of PLA.The expected improvements in mechanical properties did not occur due to the possible existence of residual solvent in the blends.

High-Performance Biodegradable PBAT/PPC Composite Film Through Reactive Compatibilizer

Poly(butylene adipate-co-terephthalate) (PBAT) is currently the largest commercial biodegradable plastics with good toughness and film forming properties, whereas, the inferior barrier and mechanical properties hinder its applications. Biodegradable poly(propylene carbonate) (PPC) with excellent barrier properties and high strength is a natural choice to address above issue. However, it is challenging to improve the compatibility of these two polymers. Herein, we prepared a reactive compatibilizer with double bond side group through terpolymerization of CO_(2)/propylene oxide/glycidyl methacrylate to enhance the properties of PBAT/PPC blends. Upon addition of 1 wt% compatibilizer, the PBAT/PPC blends (75/25, W/W) showed an increased water vapor barrier property changed from 424 g·m^(−2)·d^(−1) to 204 g·m^(−2)·d^(−1) compared to the control sample. Moreover, the tensile strength and elongation at break increased from 24.7 MPa to 30.3 MPa and from 858% to 1142%, respectively. The PBAT/PPC composite also displayed excellent biodegradability under composting conditions, as confirmed by the significantly decreased molecular weight. The present work provides an efficient way to barrier biodegradable film from PBAT of practical utilization.